How to retrieve lost data from the quickvoice app on the ipad 2?
I recently updata my iOS device on my ipad2. i backup my files before i updated but when i come to resore all of my backup files, all my new photos, documents ect have gone. I dont know whether the files didnt get backup properly, i dont know. The documents and my new photos are not really my consern. I had the quickvoice recorded app on my ipad and had two recordings on there which are really important to me and have dissapeared. Is there anyway i can get them back? Please help!
I have actually solved my problem myself. I was resoring my backup data through itunes but my quickvoice recording were backup in icloud, my icloud setting on my ipad2 mesions that my files are backup up automatically so i just pressed resore again (in the summary page on itunes) and when through the process again but this time chose icloud to restore my data not itunes.
Similar Messages
-
How to retrieve lost data from the reset Blackberry?
Hi all, I accidentally reset my Blackberry curve 8250 when i wasnt sober and all my phone contacts, sms and notes were lost. basically i use my bb as a note pad so there were many info saved on the phone. i didnt do any backup before, but i really wanna retrieve the lost data desperately. is there any method or third party software which can retrieve the data or its not possible at all? please help me out w this. thank you!!!!!
Please see the answer to your duplicate post here:
http://supportforums.blackberry.com/t5/BlackBerry-Curve-BlackBerry-8500/URGENT-How-to-RETRIEVE-LOST-...
Please don't post duplicate questions.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How to retrieve lost data from trash recently deleted with in 10 days.
My computer was recently hacked and they forwarded my mail for 2 days till I caught it. Also they had mail deleted after forwarding. Trash is empty. I want to see correspondence to protect my self. Thanks
Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery. -
How to retrieve multiple data from table and represent it in jsp page
Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
i++;
var newRow = document.all("tblGrid").insertRow();
var oCell = newRow.insertCell();
oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
oCell = newRow.insertCell();
oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
// oCell = newRow.insertCell();
// oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
}<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
ArrayList<Integer> serials = new ArrayList<Integer>();
ArrayList<Integer> apxrate = new ArrayList<Integer>();
ArrayList<Integer> srname = new ArrayList<Integer>();
ArrayList<String> itcode = new ArrayList<String>();
ArrayList<String> itname = new ArrayList<String>();
ArrayList<Integer> iqnty = new ArrayList<Integer>();
ArrayList<String> iuom = new ArrayList<String>();
ArrayList<Integer> pqnty = new ArrayList<Integer>();
ArrayList<String> puom1 = new ArrayList<String>();
ArrayList<Integer> arate = new ArrayList<Integer>();
ArrayList<String> rdate = new ArrayList<String>();
ArrayList<String> bcs = new ArrayList<String>();
ArrayList<String> ccs = new ArrayList<String>();
ArrayList<String> remarkss = new ArrayList<String>();
//ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
//ArrayList<String> dors = new ArrayList<String>();
//ArrayList<String> remarks = new ArrayList<String>();
String entryn = request.getParameter("entryno");
String rows = request.getParameter("rows");
out.println(rows);
//String Entryno = request.getParameter("entryno");
// out.println(Entryno);
int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
if(!Entryno.equals("")){
entryno = Integer.valueOf(Entryno);
if(!rows.equals("")){
rowcount = Integer.valueOf(rows);
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(serials.size());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("srno"+i)!=null){
srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
out.println(srname.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmcd"+i)!=null){
itcode.add(request.getParameter("itmcd"+i).trim());
} //out.println(itcode.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("itmnm"+i)!=null){
itname.add(request.getParameter("itmnm"+i).trim());
}//out.println(itname.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("indentqty"+i)!=null){
iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("uom"+i)!=null){
iuom.add(request.getParameter("uom"+i).trim());
}//out.println(iuom.get(i));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("mcode"+i)!=null){
mucode.add(request.getParameter("mcode"+i).trim());
for(int i=1;i<=rowcount;i++){
if(request.getParameter("packqty"+i).equals("")){
pqnty.add(0);
}else
pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("pack"+i)!=null){
puom1.add(request.getParameter("pack"+i).trim());
}else
puom1.add("");
for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i).equals("")){
arate.add(0);
}else
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
/* for(int i=1;i<=rowcount;i++){
if(request.getParameter("rate"+i)!=null){
arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dor"+i)!=null){
try{
rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
}else
{ rdate.add("");}
for(int i=1;i<=rowcount;i++){
if(request.getParameter("bcc"+i)!=null){
bcs.add(request.getParameter("bcc"+i).trim());
}out.println(bcs.get(0));
for(int i=1;i<=rowcount;i++){
if(request.getParameter("ccc"+i)!=null){
ccs.add(request.getParameter("ccc"+i).trim());
}out.println(ccs.get(0));
for(int i=1;i<=rowcount;i++){
out.println("remark2");
if(request.getParameter("remark2"+i)!=null){
remarkss.add(request.getParameter("remark2"+i).trim());
}out.println(remarkss.get(0));
ArrayList<String> Idate = new ArrayList<String>();
for(int i=1;i<=rowcount;i++){
if(request.getParameter("dateindent"+i)!=null){
try{
Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
}catch(ParseException p){p.printStackTrace();}
String Rdate = dashdate.format(new java.util.Date());
String tdate = dashdate.format(new java.util.Date());
// String Indentdate = dashdate.format(new java.util.Date());
// String ApprovedT1 = dashdate.format(new java.util.Date());
// String ApprovedT2 = dashdate.format(new java.util.Date());
// String ApprovedT1=" ";
//String ApprovedT2="";*/
String ApprovedT1= dashdate.format(new java.util.Date());
out.println (ApprovedT1);
String ApprovedT2=dashdate.format(new java.util.Date());
out.println(ApprovedT2);
String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
out.println(Indentdate);
String Cocode ="BML001";
out.println(Cocode);
String Deptcode = request.getParameter("dept1");
out.println(Deptcode);
String Empcode = request.getParameter("emp");
out.println(Empcode);
String Refno =request.getParameter("rtype");
out.println(Refno);
String Divcode = request.getParameter("todiv1");
out.println(Divcode);
String Usercode = "CIRIUS";
String Whcode = request.getParameter("stor");
out.println(Whcode);
// String Itemgroupcode = request.getParameter("");
String Itemgroupcode ="120000";
out.println(Itemgroupcode);
String Supplytypecode = request.getParameter("stype");
out.println(Supplytypecode);
String Delcode = request.getParameter("deliverycode");
out.println(Delcode);
String Itemclass="WS";
out.println(Itemclass);
// String Itemclass = request.getParameter("iclass");
// out.println(Itemclass);
String unitcode = request.getParameter("uni");
out.println(unitcode);
String Todivcode = request.getParameter("todiv1");
out.println(Todivcode);
String Appxrate = request.getParameter("rate");
out.println(Appxrate);
String Srno = request.getParameter("srno");
out.println(Srno);
/* String Indqty = request.getParameter("indentqty");
out.println(Indqty);*/
String Itemcode = request.getParameter("itmcd");
out.println(Itemcode);
String Othersp = request.getParameter("remark1");
out.println(Othersp);
String Reqdt = request.getParameter("dor");
out.println(Reqdt);
String Munitcode = request.getParameter("mcode");
out.println(Munitcode);
String Packqty = request.getParameter("packqty");
out.println(Packqty);
String Packuom = request.getParameter("pack");
out.println(Packuom);
String Remark2 = request.getParameter("remark2");
out.println(Remark2);
String BC = request.getParameter("bcc");
out.println(BC);
String CC = request.getParameter("ccc");
out.println(CC);
try{
st=connection.createStatement();
connection.setAutoCommit(false);
String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
out.println(sql);
st.addBatch(sql);
for(int i=0;i<serials.size();i++){
out.println("Inside the Statement");
String query3="test query for u";
out.println(query3);
String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
out.println(queryx);
st.addBatch(queryx);
int[] result=st.executeBatch();
connection.commit();
for(int k=0;k<result.length;k++)
out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
catch(BatchUpdateException bue)
out.println("error1;"+bue+"");
catch(SQLException sql)
out.println("error2;"+sql+"");
catch(Exception l)
out.println("error3;"+l+"");
</html>
Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
<div align="left">
<table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
<tr>
<td ><div align="left"><b>Indent No.</b></div></td>
<td ><label>
<input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
</label></td>
<td ><div align="center"><strong>Indent Date</strong></div></td>
<td ><label>
<div align="center">
<input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
</div>
</label></td>
<td> </td>
<td><div align="right"><strong>Entry No.</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
<td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
<%}%>
<div align="right"></div>
</tr>
<tr>
<td><b>Division</b></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
<td><input type="text" name="div" id="div" /></td>
<td><input type="hidden" name="div1" id="div1" /> </td>
<%}%>
<td> </td>
<td> </td>
<td><div align="right"><strong>Unit</strong></div></td>
<%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
<td><input type="text" name="unit" id="unit" /></td>
<td><input type="hidden" name="uni" id="uni" /> </td>
<%}%>
</tr>
<tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshalToo much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach. -
How can I get Data from the Sound cart in Labview? Does a VI exist?
How can I get Data from the Sound cart in Labview? Does a VI exist?
Yes, there are VIs for acquiring data from Sound cards. And examples too. If you don't have LabVIEW yet, do a search on NI's site for example VIs.
Khalid -
How do i parse data from the second jframe back to the first?
Hello.
I have a jFrame were I promt users to keep a list of Names in a jTable. (I keep data for something else, but lets say names.. ) Anyway, afterwords I want to add some extra parameters for each name. So I created a new frame, which is opened when user press an Edit button. The new frame opens and users can add for the specific name some extra data, like age, height, color, sex.. etc. that characterizes this person.
On this second form i have a save button, which when its pressed i would like to keep this information for this name, so as when user press edit again from the first frame on the same Name the data that previously entered will be loaded (lets say that the user can not enter the say name again)
I haven' t figured the code for the save Button, but with the rest I am fine.
Can you give any ideas with structures that I have to use and how the action listener will have to be??
When I set visible the new form i have made a constructor that loads the new form which have a label with the name of the person that is edited., but how do i parse data from the second form back to the first that is already opened??
Thanks very much..I found it.. it was not so hard afterall..
anyway, i quote the new code..
package namelist;
// Java core packages
import java.awt.event.*;
import java.util.*;
// Java extension packages
import javax.swing.*;
import javax.swing.table.*;
public class NamesGUI extends javax.swing.JFrame {
//Variables for managing the jTables
DefaultTableModel tableModel;
Vector rows,cols;
String[] colName1 = {"List of Names"};
ManageJTables mJT = new ManageJTables();
Hashtable h;
/** Creates new form ProsAgentGUI */
public NamesGUI() {
h = new Hashtable();
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
Panel = new javax.swing.JPanel();
ToolBar = new javax.swing.JToolBar();
ADD = new javax.swing.JButton();
EDIT = new javax.swing.JButton();
REMOVE = new javax.swing.JButton();
jButton1 = new javax.swing.JButton();
TScrollPane = new javax.swing.JScrollPane();
Table = new javax.swing.JTable();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
setTitle("Names");
setBackground(new java.awt.Color(0, 51, 51));
Panel.setBorder(javax.swing.BorderFactory.createTitledBorder("List of Names"));
ToolBar.setBorder(javax.swing.BorderFactory.createEmptyBorder(1, 1, 1, 1));
ADD.setText("ADD");
ADD.setToolTipText("");
ADD.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
ADD.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
ADDActionPerformed(evt);
ToolBar.add(ADD);
EDIT.setText("EDIT");
EDIT.setToolTipText("");
EDIT.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
EDIT.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
EDITActionPerformed(evt);
ToolBar.add(EDIT);
REMOVE.setText("REMOVE");
REMOVE.setToolTipText("");
REMOVE.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
REMOVE.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
REMOVEActionPerformed(evt);
ToolBar.add(REMOVE);
jButton1.setText("jButton1");
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
ToolBar.add(jButton1);
rows=new Vector();
cols= new Vector();
cols=mJT.addColumns(colName1, cols);
tableModel =new DefaultTableModel();
tableModel.setDataVector(rows,cols);
Table.setModel(tableModel);
TScrollPane.setViewportView(Table);
org.jdesktop.layout.GroupLayout PanelLayout = new org.jdesktop.layout.GroupLayout(Panel);
Panel.setLayout(PanelLayout);
PanelLayout.setHorizontalGroup(
PanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(ToolBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 210, Short.MAX_VALUE)
.add(TScrollPane, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 210, Short.MAX_VALUE)
PanelLayout.setVerticalGroup(
PanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(PanelLayout.createSequentialGroup()
.add(ToolBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 34, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(TScrollPane, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 159, Short.MAX_VALUE))
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap(org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(Panel, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap(29, Short.MAX_VALUE)
.add(Panel, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
pack();
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
System.out.println(h.toString());
public void updateNamesTable (int id, String na){
Integer i2 = new Integer(id);
Object o2 = (Object)i2;
if (h.containsKey(o2)){
Name a = (Name)h.get(o2);
a.name = na;
h.put(o2,a);
else {
Name aa = new Name();
aa.name=na;
h.put(o2,(Object)aa);
private void EDITActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
String name = Table.getValueAt(Table.getSelectedRow(),0).toString();
int rowNum= Table.getSelectedRow();
Integer i = new Integer(rowNum);
Object o = (Object)i;
updateNamesTable (rowNum, name);
//public NameEditor(Name n, Hashtable h, int id)
NameEditor re = new NameEditor((Name)h.get(o), h, rowNum );
re.setVisible(true);
private void REMOVEActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
mJT.deleteRow(Table.getSelectedRow(), rows, Table);
private void ADDActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
mJT.addRow(rows, Table);
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new NamesGUI().setVisible(true);
// Variables declaration - do not modify
javax.swing.JButton ADD;
javax.swing.JButton EDIT;
javax.swing.JPanel Panel;
javax.swing.JButton REMOVE;
javax.swing.JScrollPane TScrollPane;
javax.swing.JTable Table;
javax.swing.JToolBar ToolBar;
javax.swing.JButton jButton1;
// End of variables declaration
public class NameEditor extends javax.swing.JFrame {
Hashtable h;
Name n;
int id;
/** Creates new form NameEditor */
public NameEditor() {
initComponents();
public NameEditor(Name n, Hashtable h, int id) {
this.h=h;
this.n=n;
this.id=id;
initComponents();
NameField.setText(n.name);
jTextField2.setText(n.weight);
jTextField1.setText(n.height);
setDefaultCloseOperation(javax.swing.WindowConstants.DISPOSE_ON_CLOSE);
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
NameLabel = new javax.swing.JLabel();
NameField = new javax.swing.JTextField();
SaveBut = new javax.swing.JButton();
jLabel3 = new javax.swing.JLabel();
jLabel4 = new javax.swing.JLabel();
jTextField1 = new javax.swing.JTextField();
jTextField2 = new javax.swing.JTextField();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
setTitle("Name Editor");
getAccessibleContext().setAccessibleName("Name Editor");
NameLabel.setText("Name: ");
NameField.setEditable(false);
NameField.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
NameFieldActionPerformed(evt);
SaveBut.setText("SAVE");
SaveBut.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
SaveButActionPerformed(evt);
jLabel3.setText("Height");
jLabel4.setText("Weight");
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(jLabel4)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED))
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jLabel3)
.add(NameLabel))
.add(16, 16, 16)))
.add(17, 17, 17)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(NameField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 138, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING, false)
.add(org.jdesktop.layout.GroupLayout.LEADING, jTextField2)
.add(org.jdesktop.layout.GroupLayout.LEADING, jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 46, Short.MAX_VALUE))))
.add(org.jdesktop.layout.GroupLayout.LEADING, layout.createSequentialGroup()
.add(127, 127, 127)
.add(SaveBut)))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(NameLabel)
.add(NameField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(30, 30, 30)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jLabel3)
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(12, 12, 12)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jLabel4)
.add(jTextField2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 27, Short.MAX_VALUE)
.add(SaveBut)
.addContainerGap())
pack();
public void updateNameTable (){
Integer i2 = new Integer(id);
Object o2 = (Object)i2;
h.put(o2,n);
private void SaveButActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
n.height= jTextField1.getText();
n.weight = jTextField2.getText();
private void NameFieldActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new NameEditor().setVisible(true);
// Variables declaration - do not modify
javax.swing.JTextField NameField;
javax.swing.JLabel NameLabel;
javax.swing.JButton SaveBut;
javax.swing.JLabel jLabel3;
javax.swing.JLabel jLabel4;
javax.swing.JTextField jTextField1;
javax.swing.JTextField jTextField2;
// End of variables declaration
} -
How to export some data from the tables of an owner with integrity?
Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
PhilipsThanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs... -
Goto: How to export some data from the tables of an owner with integrity?
Hi to all,
Help please: How to export some data from the tables of an owner with integrity?
My thanks in advance,
PhilipsThanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs... -
When I try to sync photos or music, I followed all the steps, picked onle folder, not the whole library. When I hit "apply" I got this message:
Are you sure you want to remove 30 apps from iPad. This will delete these apps and their data from the iPad" What can I change to just download the photos and not interfere with the apps?
(By the way, the memory is not even one quarter full)
Thanks for your help - PatI have the same problem. I updated my mac to 10.5, which then had me update apps like itunes, etc. then it wanted me to sync my purchased music to my ipad before i updated the ipad...which worked ok. then when i was syncing the photos i got the same message when i hit "apply" asking are you sure you want to delete the 12 apps from the ipad - clicked "no" and brought me back to the original screen. Got the same message when trying to move them from the hard drive to the ipad. WHat is going on and how do I correct this? Thanks
-
HT4101 How can pictures be exported from the ipad to a computer or sd card?
How can pictures be exported from the ipad to a computer or sd card?
Importing personal photos and videos from your iOS device to your computer. - http://support.apple.com/kb/HT4083 - other useful information at https://discussions.apple.com/message/20302567
-
Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"
I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.
-
HT4059 How do you sync ibooks from the ipad to the iphone 4
How do I sync ibooks from the ipad mini to the iphone 4?
Thank youIf they are iTunes purchases and they are still in the store then you should be able to re-download them on your phone via the Purchased tab in the ibookstore in the iBooks app. If they are not iTunes purchases, or are no longer in the store, then you can copy them from your iPad to your computer's iTunes via File > Devices > Transfer Purchases (that should copy non-iTunes purchased books/PDFs from the iBooks app as well as ibooks) and you can then sync them to your phone.
If you then want to keep collections and bookmarks in-line between the two devices then use Settings > iBooks > Sync Bookmarks and Sync Collections 'on' ('Sync Collections' won't copy books/PDFs between the devices, it will just put those that are already on both devices in the same collection) -
How do I retrieve lost data from my phone
1.previously sync/downloaded iphone to a pc
2.February during a sync process, i unplugged the cord.
download was not completed.
3.Lost info from February to May
4.How do I retrieve #3 above.
5. Need to sync current data
Happy Labor DayThank you for responding
correction.
I previously synced my iphone to my pc.
After May, I was trying to recync my iphone 3 to the pc again.
prematurely unplugged the download.
now my feb-May data is lost on the iphone, but according to the apple store, it is still on my pc.
apple store said i have to call customer svc to retrieve this data from my computer.
it is doable. -
How to retrieve input data from a HTML form in the UTF-8 cha
I encountered the following problem with a JWeb Application:
I tried to write a JWeb-Application for OAS 4.0, that retrieves
input data from a HTML form and writes it into an Oracle
database.
All processing should be done in the UTF-8 character set.
The problem is, that the form data retrieved by getURLParameter
are always encoded in a non-unicode character set and I found no
way to change this.
Can anybody tell me what I should do to get the form data in the
UTF-8 character set?
nullHi
Try set in the JWEB application's Java environment such
SYSTEM_PROPERTY: file.encoding=UTF8.
Andrew
Thomas Gertkemper (guest) wrote:
: I encountered the following problem with a JWeb Application:
: I tried to write a JWeb-Application for OAS 4.0, that
retrieves
: input data from a HTML form and writes it into an Oracle
: database.
: All processing should be done in the UTF-8 character set.
: The problem is, that the form data retrieved by getURLParameter
: are always encoded in a non-unicode character set and I found
no
: way to change this.
: Can anybody tell me what I should do to get the form data in
the
: UTF-8 character set?
null -
Any way to find lost data from the xml file?
Is there any way I can retrieve lost metadata from my mp3’s? I have had 9 months worth deleted, the mps’s are still there but I’ve lost playlists and date added info etc. from the xml file. There are old restores from 9 months ago and now, (the iTunes librarys stored in history are from 9 months ago) the library I currently have has 5 songs ive added this week, and everything from over 9 months ago.
thanks,
guyI have experienced the EXACT same problem... can't find a solution but am searching madly. Please post what you discover, if anything.
Maybe you are looking for
-
the safari software will not display images (pictures). I have done the "reset" but still no help. What should i try next?
-
Videos are downloading as a "stream" and when i close itunes, i lose them
Everytime i download a video, have spen well over 6 bucks so far, they will download completly, but they only STREAM, and when i close itunes, my video is gone forever. . . i have tried seraching my computer for m4v files, and i have none =/ any idea
-
Unable to Retrieve Database Settings in MDM 7.1 Console
Hi, I have installed MDM7.1 on AIX and on DB2 successfully. Installed MDM Console 7.1 on my desktop and as part of Post steps I am able to mount the DB but while I am setting Database settings getting the error "unable to Retrieve Database settings"
-
Lightroom 4.0 Löschen von Bildern
Hi, in my case, LR 4 do not delete files from HD when I choose this item in LR 4. LR turnes the files to the wastebasket of windows, but they still stay on HD. In Win Explorer I can see and open them. My system: Win 7 professionel, 64 Bit and LR 4.0.
-
'servername' was succesfully configured as a directory server but an error occurred.
when trying to create an open directory master after i had to re-install my server i get the error message stated in the title and it is vital that i get this repaired as i cant allow access to the network to anyone until this is resolved, I have alr