How to retrieve lost data from trash recently deleted with in 10 days.

My computer was recently hacked and they forwarded my mail for 2 days till I caught it. Also they had mail deleted after forwarding. Trash is empty. I want to see correspondence to protect my self. Thanks

Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Similar Messages

How to retrieve lost data from the reset Blackberry?

Hi all, I accidentally reset my Blackberry curve 8250 when i wasnt sober and all my phone contacts, sms and notes were lost. basically i use my bb as a note pad so there were many info saved on the phone. i didnt do any backup before, but i really wanna retrieve the lost data desperately. is there any method or third party software which can retrieve the data or its not possible at all? please help me out w this. thank you!!!!!

Please see the answer to your duplicate post here:
http://supportforums.blackberry.com/t5/BlackBerry-Curve-BlackBerry-8500/URGENT-How-to-RETRIEVE-LOST-...
Please don't post duplicate questions.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to retrieve lost data from the quickvoice app on the ipad 2?

I recently updata my iOS device on my ipad2. i backup my files before i updated but when i come to resore all of my backup files, all my new photos, documents ect have gone. I dont know whether the files didnt get backup properly, i dont know. The documents and my new photos are not really my consern. I had the quickvoice recorded app on my ipad and had two recordings on there which are really important to me and have dissapeared. Is there anyway i can get them back? Please help!

I have actually solved my problem myself. I was resoring my backup data through itunes but my quickvoice recording were backup in icloud, my icloud setting on my ipad2 mesions that my files are backup up automatically so i just pressed resore again (in the summary page on itunes) and when through the process again but this time chose icloud to restore my data not itunes.

How to retrieve multiple data from table and represent it in jsp page

Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
            i++;
            var newRow = document.all("tblGrid").insertRow();
            var oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
            oCell = newRow.insertCell();
                oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
           // oCell = newRow.insertCell();
           // oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
        }<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
                            ArrayList<Integer> serials = new ArrayList<Integer>();
                            ArrayList<Integer> apxrate = new ArrayList<Integer>();
                            ArrayList<Integer> srname = new ArrayList<Integer>();
                            ArrayList<String> itcode = new ArrayList<String>();
                            ArrayList<String> itname = new ArrayList<String>();
                            ArrayList<Integer> iqnty = new ArrayList<Integer>();
                            ArrayList<String> iuom = new ArrayList<String>();
                            ArrayList<Integer> pqnty = new ArrayList<Integer>();
                            ArrayList<String> puom1 = new ArrayList<String>();
                           ArrayList<Integer> arate = new ArrayList<Integer>();
                            ArrayList<String> rdate = new ArrayList<String>();
                            ArrayList<String> bcs = new ArrayList<String>();
                            ArrayList<String> ccs = new ArrayList<String>();
                            ArrayList<String> remarkss = new ArrayList<String>();
                            //ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
                            //ArrayList<String> dors = new ArrayList<String>();
                            //ArrayList<String> remarks = new ArrayList<String>();
                 String entryn = request.getParameter("entryno");
                    String rows = request.getParameter("rows");
                    out.println(rows);
                    //String Entryno = request.getParameter("entryno");
                   // out.println(Entryno);
                  int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
                            if(!Entryno.equals("")){
                                    entryno = Integer.valueOf(Entryno);
                            if(!rows.equals("")){
                                    rowcount = Integer.valueOf(rows);
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("srno"+i)!=null){
                                            serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
                                            out.println(serials.size());
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("srno"+i)!=null){
                                            srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
                            out.println(srname.get(0));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("itmcd"+i)!=null){
                                            itcode.add(request.getParameter("itmcd"+i).trim());
                                    } //out.println(itcode.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("itmnm"+i)!=null){
                                            itname.add(request.getParameter("itmnm"+i).trim());
                                    }//out.println(itname.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("indentqty"+i)!=null){
                                            iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("uom"+i)!=null){
                                            iuom.add(request.getParameter("uom"+i).trim());
                                    }//out.println(iuom.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("mcode"+i)!=null){
                                            mucode.add(request.getParameter("mcode"+i).trim());
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("packqty"+i).equals("")){
                                      pqnty.add(0);
                                    }else
                                        pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("pack"+i)!=null){
                                            puom1.add(request.getParameter("pack"+i).trim());
                                   }else
                                    puom1.add("");
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("rate"+i).equals("")){
                                        arate.add(0);
                                    }else
                                    arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
                 /* for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("rate"+i)!=null){
                                            arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
                          for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("dor"+i)!=null){
                                            try{
                                                    rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
                                            }catch(ParseException p){p.printStackTrace();}
                                    }else
                                       { rdate.add("");}
                               for(int i=1;i<=rowcount;i++){
                             if(request.getParameter("bcc"+i)!=null){
                                            bcs.add(request.getParameter("bcc"+i).trim());
                                    }out.println(bcs.get(0));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("ccc"+i)!=null){
                                            ccs.add(request.getParameter("ccc"+i).trim());
                                    }out.println(ccs.get(0));
                            for(int i=1;i<=rowcount;i++){
                                out.println("remark2");
                                    if(request.getParameter("remark2"+i)!=null){
                                            remarkss.add(request.getParameter("remark2"+i).trim());
                                    }out.println(remarkss.get(0));
                    ArrayList<String> Idate = new ArrayList<String>();
                    for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("dateindent"+i)!=null){
                                            try{
                                                    Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
                                            }catch(ParseException p){p.printStackTrace();}
                String Rdate = dashdate.format(new java.util.Date());
                 String tdate = dashdate.format(new java.util.Date());
                 // String Indentdate = dashdate.format(new java.util.Date());
               // String ApprovedT1 = dashdate.format(new java.util.Date());
               // String ApprovedT2 = dashdate.format(new java.util.Date());
                   // String ApprovedT1=" ";
                    //String ApprovedT2="";*/
                String ApprovedT1= dashdate.format(new java.util.Date());
               out.println (ApprovedT1);
                  String ApprovedT2=dashdate.format(new java.util.Date());
                   out.println(ApprovedT2);
                String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
                   out.println(Indentdate);
                    String Cocode ="BML001";
                    out.println(Cocode);
                    String Deptcode = request.getParameter("dept1");
                    out.println(Deptcode);
                    String Empcode = request.getParameter("emp");
                    out.println(Empcode);
                    String Refno =request.getParameter("rtype");
                     out.println(Refno);
                    String Divcode = request.getParameter("todiv1");
                    out.println(Divcode);
                    String Usercode = "CIRIUS";
                     String Whcode = request.getParameter("stor");
                    out.println(Whcode);
                    // String Itemgroupcode = request.getParameter("");
                     String Itemgroupcode ="120000";
                     out.println(Itemgroupcode);
                    String Supplytypecode = request.getParameter("stype");
                    out.println(Supplytypecode);
                    String Delcode = request.getParameter("deliverycode");
                    out.println(Delcode);
                    String Itemclass="WS";
                    out.println(Itemclass);
                    // String Itemclass = request.getParameter("iclass");
                   // out.println(Itemclass);
                    String unitcode = request.getParameter("uni");
                    out.println(unitcode);
                     String Todivcode = request.getParameter("todiv1");
                    out.println(Todivcode);
                    String Appxrate = request.getParameter("rate");
                    out.println(Appxrate);
                    String Srno = request.getParameter("srno");
                    out.println(Srno);
                /*    String Indqty = request.getParameter("indentqty");
                  out.println(Indqty);*/
              String Itemcode = request.getParameter("itmcd");
                   out.println(Itemcode);
                   String Othersp = request.getParameter("remark1");
                    out.println(Othersp);
                    String Reqdt = request.getParameter("dor");
                    out.println(Reqdt);
                    String Munitcode = request.getParameter("mcode");
                    out.println(Munitcode);
                    String Packqty = request.getParameter("packqty");
                    out.println(Packqty);
                    String Packuom = request.getParameter("pack");
                    out.println(Packuom);
                    String Remark2 = request.getParameter("remark2");
                    out.println(Remark2);
                    String BC = request.getParameter("bcc");
                    out.println(BC);
                    String CC = request.getParameter("ccc");
                    out.println(CC);
                    try{
                        st=connection.createStatement();
                        connection.setAutoCommit(false);
                        String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
                        out.println(sql);
                        st.addBatch(sql);
                        for(int i=0;i<serials.size();i++){
                            out.println("Inside the Statement");
                            String query3="test query for u";
                            out.println(query3);
                           String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
                           out.println(queryx);
                            st.addBatch(queryx);
                       int[] result=st.executeBatch();
                       connection.commit();
                       for(int k=0;k<result.length;k++)
                       out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
                    catch(BatchUpdateException bue)
                    out.println("error1;"+bue+"");
                    catch(SQLException sql)
                    out.println("error2;"+sql+"");
                    catch(Exception l)
                    out.println("error3;"+l+"");
</html>
   Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
    <div align="left">
        <table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
            <tr>
                <td ><div align="left"><b>Indent No.</b></div></td>
                <td ><label>
                        <input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
                </label></td>
                <td ><div align="center"><strong>Indent Date</strong></div></td>
                <td ><label>
                        <div align="center">
                            <input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
                        </div>
                </label></td>
                <td> </td>
                <td><div align="right"><strong>Entry No.</strong></div></td>
                 <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
        <td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
               <td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
                         <%}%>
                        <div align="right"></div>
            </tr>
            <tr>
                <td><b>Division</b></td>
                <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
               <td><input type="text" name="div" id="div" /></td>
               <td><input type="hidden" name="div1" id="div1" /> </td>
          <%}%>
                <td> </td>
                <td> </td>
                <td><div align="right"><strong>Unit</strong></div></td>
               <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
               <td><input type="text" name="unit" id="unit" /></td>
               <td><input type="hidden" name="uni" id="uni" /> </td>
          <%}%>
            </tr>
            <tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshal

Too much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach.

How to retrieve the data from SAP-BAPI by using VB Code

Hi ,
I am new to BAPI.
V have created an application in Visual Basic with the following fields
EmpNo , EmpName, Addr1, Addr2, City and Phone (Only for Test)
We have written the code for SAVING the data into SAP. Already we have
constructed a table with the respective fields in SAP.
For that we ourself created our own BAPI Structure / Function Group /
Function Module/ Business Object - RELEASED related elements.
1)Established the connection successfully.
2)Stored the data into SAP Successfully and v r in need of
3)HOW TO RETRIEVE THE DATA FROM SAP (USING GETLIST.....GETDETAIL....)
Following is the code :
'BAPI Structure : ZBAPIEMP
'Function Group : ZBAPIEMP
'Function Module : ZBAPI_EMP_CREATEFROMDATA
'Business Object : ZBAPIEMP
'Function Module : ZBAPI_EMP_GETLIST
Dim bapictrl As Object
Dim oconnection As Object
Dim boEmp As Object
Dim oZEmp_Header As Object
Dim oImpStruct As Object
Dim oExpStruct As Object
Dim oreturn As Object
Dim x As String
Private Sub Form_Load()
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boEmp = bapictrl.GetSAPObject("ZBAPIEMP")
Set oZEmp_Header = bapictrl.DimAs(boEmp, "CreateFromData", "EmployeeHeader")
Set oImpStruct = bapictrl.DimAs(boEmp, "GetList", "EmployeeDispStruct")
End Sub
Private Sub cmdSave_Click()
    oZEmp_Header.Value("EMPNO") = txtEmpNo.Text
    oZEmp_Header.Value("EMPNAME") = txtEmpName.Text
    oZEmp_Header.Value("ADDR1") = txtAddr1.Text
    oZEmp_Header.Value("ADDR2") = txtAddr2.Text
    oZEmp_Header.Value("CITY") = txtCity.Text
    oZEmp_Header.Value("PHONE") = txtPhone.Text
    boEmp.CreateFromData EmployeeHeader:=oZEmp_Header, Return:=oreturn
    x = oreturn.Value("Message")
    If x = "" Then
        MsgBox "Transaction Completed!..."
    Else
        MsgBox x
    End If
End Sub
Private Sub cmdView_Click()
End Sub
COULD ANYBODY GUIDE ME, HOW TO RETRIEVE THE DATA FROM BAPI, FOR THE WRITTEN CODE.

I didn't seen any other answers but here's how it's been done previously in our organization for a custom BAPI. In this example, we give material and language to return the part description. It's not specific to your project but may give you ideas..
-Tim
Option Compare Database
Dim SAPLOGIN As Boolean
Dim FunctionCtrl As Object
Dim SapConnection As Object
Sub SAPLOGOUT()
On Error GoTo LogoutFehler
    SapConnection.logoff
    SAPLOGIN = False
Exit Sub
LogoutFehler:
    If Err.Number = 91 Then
        Exit Sub
    Else
        MsgBox Err.Description, vbCritical, "Fehler-Nr." & CStr(Err.Number) & " bei SAP-Logout"
    End If
End Sub
Function SAPLOG() As Boolean
'Verbindungsobjekt setzen (Property von FunctionCtrl)
   Set FunctionCtrl = CreateObject("SAP.Functions")
   Set SapConnection = FunctionCtrl.Connection
'Logon mit Initialwerten
   SapConnection.Client = "010"
   SapConnection.Language = "EN"
   SapConnection.System = "PR1"
   SapConnection.SystemNumber = "00"
   'SapConnection.Password = ""
   SapConnection.GroupName = "PR1"
   SapConnection.HostName = "168.9.25.120"
   SapConnection.MessageServer = "168.9.25.120"
     If SapConnection.Logon(0, False) <> True Then 'Logon mit Dialog
         Set SapConnection = Nothing
         DoCmd.Hourglass False
         MsgBox "No connection to SAP R/3 !"
         SAPLOGIN = False
         SAPLOG = False
         Exit Function
      End If
    SAPLOG = True
End Function
Function MatDescr(MatNr As String)
Dim func1 As Object
Dim row As Object, X As Integer, ErsteNr As String
Dim DatensatzZähler As Long
Dim RowField(1 To 50, 0 To 1) As String, RowLine As Long
    If Not SAPLOGIN Then
        If Not SAPLOG() Then
            MsgBox "No connection to SAP !", 16
            SAPLOGOUT
            Exit Function
        End If
    End If
' Instanziieren des Function-Objektes
Set func1 = FunctionCtrl.Add("Z_BAPI_READ_MAKT")
' Export-Paramter definieren
func1.exports("MATNR") = MatNr
func1.exports("SPRAS") = "EN"
DoEvents
If Not func1.call Then
    If func1.exception <> "" Then
        MsgBox "Communication Error with RFC " & func1.exception
    End If
    DoCmd.Hourglass False
    SAPLOGOUT
    Exit Function
Else
MatDescr = func1.imports("MAKTX")
End If
If MatDescr = "" Then
    MatDescr = "PART NO. NOT FOUND"
End If
End Function

How do I retrieve lost data from my phone

1.previously sync/downloaded iphone to a pc
2.February during a sync process, i unplugged the cord.
download was not completed.
3.Lost info from February to May
4.How do I retrieve #3 above.
5. Need to sync current data
Happy Labor Day

Thank you for responding
correction.
I previously synced my iphone to my pc.
After May, I was trying to recync my iphone 3 to the pc again.
prematurely unplugged the download.
now my feb-May data is lost on the iphone, but according to the apple store, it is still on my pc.
apple store said i have to call customer svc to retrieve this data from my computer.
it is doable.

How to retrieve name4 data from backend for display on View Ship-to Address

Hi Everyone,
I need your advise / help:
I added name4 in shiptodetails1.jsp for new ship-to address when ordering. This name4 can be entered, saved to backend and display before submit rder. but when dispaly the created order, the name4 data is not shown on View Ship-to party Address page. Seems address.getName4() is not enough, I need to modify some method to retrieve the data from backend address object. Can anyone guide me what and how to enhance forretrieving name4 data from backend, so it can display on View Ship-to Address?
Any advises / suggestions?
Thanks, Jin

Hi Jin,
I hope you already found the solution but here some more detail.
I am working on ISA with ECC so I do not have an access to CRM system.
As you are facing problem to retrieve data from back-end while displaying it on order status page you can debug code of class DetailStrategyR3.class.
There is a method fillDocument this method call RFC BAPI_ISAORDER_GETDETAILEDLIST. This RFC actually read Order related data from backend and fill the SalesDocument object. Method fillDocument also call other methods like fillShipTo.
During debug in NWDS you can see address data and check the values of Address object. If Name3 or Name4 and nickName contains no value then you can't get it on JSP page because it is not coming from the RFC.
So I suggest you should first check DetailStrategyR3.class as it is preparing Document for display purpose. When you open any order on orderstatusdetail page this class comes in Action and prepare SalesDocumet with all necessary information including Ship to Address of that order. So If here you do not get value in Name3, Name4 or Nickname then you have to do some custom development
Check Below code while debug in NWDS.
//fill ship-to information on header and item level
        fillShipTo(document,
                   partnerTable,
                   getDetailedList.getTableParameterList().getTable(
                           "ORDER_ADDRESS_OUT"),
                   connection);
        ShipToData shipTo = document.getHeaderData().getShipToData();
        orderHeader.setShipToData(shipTo);
Check shipTo object in "Variable" window while debugging. Here you will get address object and can see all the variable value like FirstName, LastName, Name1, NAme2, Name3...NickName etc..... If no value in Name3, Name4 then you will not get on Page.
I hope this will help you to understand why Name3-Name4-Nickname does not have a Value though you have provided while creating an order.
Thanks and Regards.
eCommerce Developer

How to retrieve input data from a HTML form in the UTF-8 cha

I encountered the following problem with a JWeb Application:
I tried to write a JWeb-Application for OAS 4.0, that retrieves
input data from a HTML form and writes it into an Oracle
database.
All processing should be done in the UTF-8 character set.
The problem is, that the form data retrieved by getURLParameter
are always encoded in a non-unicode character set and I found no
way to change this.
Can anybody tell me what I should do to get the form data in the
UTF-8 character set?
null

Hi
Try set in the JWEB application's Java environment such
SYSTEM_PROPERTY: file.encoding=UTF8.
Andrew
Thomas Gertkemper (guest) wrote:
: I encountered the following problem with a JWeb Application:
: I tried to write a JWeb-Application for OAS 4.0, that
retrieves
: input data from a HTML form and writes it into an Oracle
: database.
: All processing should be done in the UTF-8 character set.
: The problem is, that the form data retrieved by getURLParameter
: are always encoded in a non-unicode character set and I found
no
: way to change this.
: Can anybody tell me what I should do to get the form data in
the
: UTF-8 character set?
null

How to retrieve the data from Website and Upload it in SAP table?

Dear ABAPers,
I want to retrieve the data from website and upload the same in SAP Database Table is that possible.Please help me.It is very Urgent.
Thanks & Regards,
Ashok.

Dear Abhishek,
Thanks for your reply.But my requirement is not met.
If i execute the program it should retrieve the data from particular website.
Thanks & Regards,
Ashok.

How to retrieve time data from infotypes 2001 and 2002 when we use PNPCE

Hello Everyone,
   I am new in using PNPCE ldb.In the requirement i have to retrieve time data from infotypes 2001 and 2002 between the begda and endda.I tried using the macro RP-READ-ALL-TIME-ITY to retrieve data.But its not supporting.Can some body help me in doing this.
THanks in Advance..
Regards,
Chinni.

Hi
   Try the following code:
REPORT ZHRTM41.
nodes peras.
Tables: PERNR.
Infotypes: 2001.
start-of-selection.
get peras.
rp_read_all_time_ity pn-begda pn-endda.
end-of-selection.
loop at p2001.
write:/ p2001-abwtg,p2001-stdaz.
endloop.
    It worked for me when using PNPCE. let me know if you have any problem
Thanks,
V.Nagaraju

How to retrieve "Lost" data; zire31... help

I have a Palm Zire 31 which no longer charges. The reset button does not even bring up a screen. Once when I hit reset I got a home screen showing 2004. I have backed up some of the data which is on a Excel spreadsheet on my computer. However, unfortunately, I had not backed up the device recently and so there is data there that I do not have. The Palm desktop does not contain any data either... I did not back that up properly.
I have three questions:
(1) Can I verify that the charger is working correctly?
(2) Is there some way to restart this old device so that I can retrieve the data there and then back it up?
(3) Is there a way to reload the data that exists on the spreadsheet onto a new Palm Zire 31, or newer, which I would purchase? If so, what model do you recommend... and how would I load the data from the spreadsheet onto the new device?
Post relates to: Zire 31
Post relates to: Zire 31

If your Zire is totally without a charge for more than a few days, then all of the data that was on the handheld is gone.
1. You'll need another compatible device to plug into, to see if your charger is working.
2. We cannot diagnose such an apparent hardware failure over these forums. I suggest plugging it in and trying a Hard Reset. This article discusses the various types of Reset for different Palm devices:
http://tinyurl.com/zlwza
3. Without knowing what kind of data you have saved to a spreadsheet (i.e. what program(s) the data came from), we cannot possibly know how or whether it can be restored to a replacement Palm device. As for what kind of replacement device, go onto eBay and search for the Tungsten E2 or the TX. They were the two most recent models, either of which would be a huge upgrade from the Zire 31. But they will all be used and/or refurbished.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

How to retrieve the data from SAP database.

Hi Pals,
How to retrieve data from SAP R/3 System to my third party software. I will make my query little bit more clear. There is a list of assets entered and stored in the SAP system. For example 3 mobile phones.
1) Mobile 1- Nokia
2) Mobile 2 - Samsung
3) Mobile 3 u2013 Sony
Now think I do not know what all assets is there. I have to retrieve the data and get it on my third party software. Just display the list of assets. Lets say SAP XI is also there. Now how will I map it and get the details.
Please give me step by step method.
N.B: Just to read the data from SAP database.
Please make the flow clear step by step.
Thanking you
AK

Hi,
You can use RFC or ABAP Proxy to make synchronous call with SAP.
Under RFC or ABAP Proxy Program you can get the data from SAP tables. Direct access to SAP Database is not preferrable even if its possible.
The better way to go for RFC or PROXY.
You will send the request from Third party system and the it will be as input parameters from RFC/ Proxy it will response based on it.
This got it all..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
HTTP to RFC - A Starter Kit
/people/community.user/blog/2006/12/12/http-to-rfc--a-starter-kit
Refer
Thanks
Swarup
Edited by: Swarup Sawant on Jun 4, 2008 9:32 AM

How to retrieve the data from a jsp page for print?

i have a dynamic jsp file which will get the data at runtime.I have a print button in the jsp.When i chick the print button it should capture the data from the jsp and print it as LANDSCAPE mode. Now i am using Java Api for this
          Following code is a working sample which prints some data in LANDSCAPE mode..This is working fine....How can i modify this to get the data from a jsp?....I am using weblogic workshop for development
          package Awtjava;
          //working example
          import java.awt.*;
          import java.awt.print.*;
          public class testPrint implements Printable {
          private static String s[];
          private static Font f;
          private static int nLines;
          public static void main (String arg[]){
          s = new String[10];
          f = new Font("Arial", Font.PLAIN, 11);
          int i;
          s[0] = "This is a printer test";
          for (i=1; i<10; i++){
          s[i] = "The next line";
          nLines = 10;
          testPrint.printa();
          public static void printa(){
          System.out.println("public static void printa () ");
          PrinterJob pj=PrinterJob.getPrinterJob();
          Book b = new Book();;
          PageFormat pf = new PageFormat();
          pf = pj.defaultPage(pf);
          b.append(new testPrint(), pf, 2);
          pj.setPageable (b);
          try{
          if (pj.printDialog()){
          pj.print();
          catch (Exception e) { System.out.println ("Error"); }
          public int print (Graphics g1, PageFormat pf, int n){
          System.out.println("public int print");
          int x,y,i,fa,fh;
          FontMetrics fm;
          Graphics2D g = (Graphics2D) g1;
          pf.setOrientation(PageFormat.LANDSCAPE);
          fm = g.getFontMetrics (f);
          fa = fm.getMaxAscent();
          fh = fm.getHeight();
          x = (int)pf.getImageableX();
          y = (int)pf.getImageableY() + fa;
          g.setFont (f);
          g.setColor(Color.black);
          if (n==1){
          for (i=0; i<10; i++){
          g.drawString (s, x, y);
          y += fh;
          return PAGE_EXISTS;
          else {
          for (i=10;i<10; i++){
          g.drawString (s[i], x, y);
          y += fh;
          return PAGE_EXISTS;
          Hope you will reply soon...
          Thanks in advance
          Maria

Hey, I got a doubt that who will call the print method in the same program and what about the g.drawString() it is showing any output effect. Finally how the variable n will get initializing to 0 and 1 for two times respectively. Can u please elaborate on this...

How to recover lost data from a mac that was erased and locked using findmyiphone app

Hi,
My macbook pro was locked and erased using find my iphone app then it was recovered. I entered my pin and unlocked it. I then have the option to reinstall the OS on a new hard drive or my old one (which is blocked).
What do I do if i want to recover all of my old data?

Alas the answer is : NO
If you have an external HD, you may try tun run a recovery tool instlled on this external device searching for keystring "index.xml"
With a bit of luck, it will retrieve an old copy of your document.
I hope that this time you will understand that working the way you did is playing with matches.
Whe you work on a document already saved once, duplicate the document before opening it and check that both copies are OK.
This way you will have at least a copy containg the datas from the 25 first day.
During the working session, don't save with the name of the opened doc, save vert ten minutes with different names.
Doing that you will recover at least the copy which you opened.
Yvan KOENIG (VALLAURIS, France) jeudi 10 janvier 2011 21:27:19
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How to Recover Lost Date from Nokia 2690

Friends i have lost some usefull data from Nokia 2690 because software is damaged, the data i have lost is worth more than my life, so since past months i have been worried and suffering form deppression.
My request to all of you is that suggest me is there any way of recovering that data at any cost
Waiting for resopnse
Thanks
Taauf Ali

https://discussions.apple.com/docs/DOC-1689

How to retrieve lost data from trash recently deleted with in 10 days.

Similar Messages

Maybe you are looking for