How to retrieve original RAW image after cropping and opening RAW file?

Hi
I have a Canon EOS 350D camera and now have PSE 9.  I have taken some RAW images & imported them into PSE 9 OK.  I know the original RAW image is retained after editing.  However, after cropping a RAW image in the Editor and then "Opening" and "Saving as" a PSD or JPEG, I then close the image in Editor and the cropped image appears in the Organiser.  That is as it should be, I think.  If I then wish to start again from scratch on the original RAW image, it seems to me that I have to manually delete the edited version and the .xmp file in Windows Explorer, and then double click the original RAW file in Windows Explorer, which then opens correctly in PSE 9 Editor.  Can this be done from PSE 9?

When you open the original camera raw image, go to the flyout menu
and choose Camera Raw Defaults, that resets everything but the crop, straighten,
and rotatate settings.
To get rid of the crop and/or straighten settings, click and hold on the crop tool and choose Clear Crop.
To reset the Image rotation settings, you have manually rotate back using the image rotate buttons.
MTSTUNER

Similar Messages

  • How to keep original aspect ratio when cropping in Camera Raw?

    How to keep original aspect ratio when cropping in Camera Raw? Cant figure it out! With shift, the aspect ratio is 1:1. But I didnt set it to 1:1 (I checked "normal").

    The Shift key works once you’ve set your crop ratio.  DSLRs would typically do 2:3 and others sometimes do 3:4.

  • I cant get camera raw update 8.7.1 to work with lightroom 5.7 after downloading and opening zip file

    When I try to open a raw file from lightroom 5.7 I get a message that I need camera raw 8.7.1. I downloaded the update as a zip file I extracted file then went through the install wizard process but still I cant get it to work. If I go to photoshop cs5 and open a raw file. canon crw. It will open in camera raw 6.7. can anyone help?

    update your lr:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • How to undo cropped and rotated RAW images in ACR

    Can someone advise on returning to the original RAW image after the image has been edited in ACR.
    "Reset Camera Raw Defaults" seems to do everything but undo crops and image rotation.
    How do I undo these and/or return to the original unedited image?
    Many thanks

    Thanks but how exactly do I find the unedited CR2 within PSE/ACR?
    Everytime I open the file in PSE or ACR the edited version comes up and the most original version I can return to is to reset the Defaults.  However, this does not reverse crops and rotations
    I have noticed that the original CR2 file is viewable within MS Explorer but I'm reluctant to delete the .xmp as I don't want to loose keywords etc associated with the image.
    Many thanks for any suggestions

  • Photoshop (cc) crop tool overly sharpens image after crop??

    I have just noticed something really interesting and quite annoying about the photoshop cc crop tool.
    It seems to slightly over sharpen an image after cropping. Does anyone know if there is a way to disable this?
    I did the same crop with the same image in CS4 and looks fine. It's pretty nasty and makes images look very digital.
    Has anyone else noticed this?
    Thanks, Dan

    This might have to do with a change that was made to the default resizing technique in Photoshop between CS4 and now.
    Try this: Open the Preferences dialog box, and in the General panel, change Image Interpolation to "Bicubic (best for smooth gradients)". Then run the same preset.
    If that change makes a Crop tool resize work like it did in CS4, then the reason you saw a change is because in more recent versions of Photoshop the default technique for resampling was changed to "Bicubic Automatic" which tries to pick the right algorithm based on whether you're resampling up or down. It applies to resizing in general (for example, transformations), and you're seeing it because a crop resulted in resampling.
    You can test various settings there to see which one is best for your work.

  • How to get Adobe Camera RAW loaded so I can open RAW files from a Panasonic LX7?

    I opened these images two days ago. Now I get a message that the CS6 Photoshop does not recognize this type of file. I went online and again(3rd time)downloaded Camera RAW 7.3 and tried installing and opening the images.
    Once again - same thing.
    Now I have something called a DNG converter on the machine and I don't know what it is.
    I opened it and tried to get to the LX7 files in my computer I can see in Bridge - and the DNG converter does not show the files at all.
    I was doing just fine with CS5 - then I bought this piece of crap because I could not get an update for CS5 to open the Panasonic Lumix LX7 images. So, I wasted $200 on CX6 only to find I can't get my images opened.
    I hate photoshop more every damn day
    First, took three days and over 9 hours wasted on hold for Adobe phone help - and finally got a guy on to help me register Photoshop CS6 - and he could not get it to register. Finally after a day & a half and hours of continually cutting and pasting from teh online computer to the main computer that does not hook up to the Internet I got CS6 to work.
    Then, I opened the Panasonic LX7 RAW images twice after downloading and installing Adobe Camera RAW 7.1 and 7.3 - and now the machine does not recognize the files and tells me to go to http://www.adobe.com/go/kb407111
    I went there and have downloaded the Camera Raw 7.1 and 7.3 four different times now and tried installing it - and Still can't open the damn files. I keep getting the same "photoshop cannot open this file" message and teh same referenc to teh above.
    How can I get this piece of Shiz to work???
    Oh - the name for ID above is after 22 minutes of trynig to find an name this program would accept.

    The first thing I would suggest is, in Photoshop, go to Help/About Plug-Ins and click on Camera Raw to verify what version is installed. There should only be one version listed, and listed only once. If there are more, then you need to get rid of the extras.
    The DNG converter is a program that will create DNG (digital negative) copies of your raw images. It takes all of the raw image data and copies it to a new file format. The raw data is unmodified, and the DNG file is a standardized and open documented file format. But the DNG converter will not list the actual files. You choose the folder that contains your original raw images, and then the converter will put the copies wherever you choose to put them. But if your camera is supposed to be supported by the latest version of Camera Raw, I don't know if converting will solve the problem. It won't hurt anything; your raw files are still intact.
    It would be helpful if you could describe your computer; operating system, how much RAM, a little information to allow the experts (of which I am NOT one) to help you isolate and solve this problem.

  • How do I get an image from Picasa and transfer it to photoshop to work on it.?

    how do I obtain an image from picasa and bring it to ps to work on it?

    Are you using a Windows system, and do you have File Explore set to show extensions?  I am wondering if the file name might look like:
    'Starbirds Picture.jpg.tiff'  ?
    The fact that you say the image looks different after reducing its bit depth makes me think you are right about it being 32 bit, but as Chris said, it can't be a JPG.
    Your computer monitor is not capable of displaying the full tonal range of a 32bit image produced by an HDR program like Photomatix or Photoshop, so it has to make compromises.  You have to chose what process to use to reduce its bit depth to give it the look you are after.  I prefer Photomatix for HDR.  If you install a trial version and open your 32 bit image in it, you can then chose one of the options to convert it to 16 or 8 bit.  These might be Tone Mapping, Exposure Fusion, or Tone Compression.   Tone Mapping is the option that produces the typical HDR look.
    But you are using Photoshop.  I haven't noticed what version you are using, but Google Photoshop (your version) HDR processing, and you'll see how to control the end look of the image.

  • How do I cut an image in half and move the halves independently?

    How do I cut an image in half, and move the halves independently?

    Use the rectangular marquee tool to select half the image, then Layer>New Layer via cut. You can turn on the rulers and set a guide so you'll know the boundaries you want if you need it to be exactly half.
    If you want to also be able to move the other half, before you start double click the background layer in the layers panel to turn it to a regular layer.

  • When I use dynamic link how do I continue using it after closing and reopening a project?

    Hi
    Im very new to AF
    I cant seem to find the answer to this in any tutorials.
    When I using dynamic link, how do I continue using it after closing and reopening a perm pro project?
    Thanks
    Philip

    Hi Kevin
    Thank you very much for such a quick reply.
    I actually figured it out. As usual it was fairly obvious solution.
    I opened both project at the same time.
    Thanks again and sorry for waisting your time.
    R
    Philip

  • How can I clear a form after submitting and saving the data in the iOS Acrobat Reader App

    How can I clear a form after submitting and saving the data in the iOS Acrobat Reader App

    Darrell,
    Thanks for this response. After I posted mine, I saw that the resetForm JavaScript method is documented as being supported starting with version 10.5: http://www.adobe.com/devnet-docs/acrobatetk/tools/Mobile/js.html
    But I haven't been able to get it to work. Can you clarify if support was indeed added and if it works for you?

  • PSCS3 10.0 Extended/Camera RAW 431 updted--can't open RAW files

    Windows Vista 64 Ultimate
    CS3 10 Extended
    I manually installed the new RAW 431 update per instructions:
    To install with Adobe Creative Suite 3 or Photoshop CS3:
    1. Exit Photoshop CS3.
    2. Open My Computer.
    3. Double-click Local Disk (C:).
    4. Navigate to: (Please read directory carefully)
    Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats
    I might add too that in Vista 64 Ultimate OEM version the file location above is INCORRECT. In fact, the location doesn't exist.
    The file is located in:
    Program Files (x86)\Common Files\Adobe\Plug-Ins\CS3\File Formats
    I re-downloaded the file twice to make sure it wasn't corrupted and checked the file size on both versions, which was identical.
    When I try to open any raw file, even those converted using the new DNG converter, I get the message "Could not complete your request because it is not the right kind of document."
    Reinstalling Camera Raw 4.0 that shipped with CS3 solves the problem.
    I've purged every cache Adobe and Bridge has with no solution.
    [BTW, before I installed the 431 version of "Camera Raw.8bi" I renamed the original version "Camera Raw.8bi.BAK" and left it in the same directory. I reversed this method when going back to the original 4.0 version.]
    Thanks for those who help.

    Any ideas or do I need to move to another software to open my Canon files? Also, converting to DNG gives the same error message. 431 is not working on my system.
    I'm not passing judgment here, but I need to get back to work on my Canon 1DS MKIII files, and Adobe isn't cutting the mustard any longer for us. If we can't get it working in the next day or two, I'll need suggestions on a RAW converter that will actually open RAW files.

  • I'VE CREATED A FORM WITH IMAGES. WHEN I OPEN THE FILE IN ACROBAT READER, THE IMAGES ARE BALCK BOXES!

    I'VE CREATED A FORM WITH IMAGES. WHEN I OPEN THE FILE IN ACROBAT READER THE IMAGES ARE BLACK BOXES.
    THE FORM HAs (extend features to acrobat reader). THE FORM WAS DISTRIBUTED.
    NON OF MY EMPOYEES CAN SEE THE IMAGES. WHAT'S WRONG? CAN YOU HELP?

    However, the view large images is an issue for a form that is being distributed. Either a note needs to be added to the PDF to tell how to enable the view or the images need to be changed so that the enabling is not needed.

  • I have recently updated my CC programs to the latest version and now all of my files wont open by default into their respective programs, only if I open the program and go to file open and open the file from there. How can I fix this?

    I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
    I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anyway

    On Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
    But there is a plugin for ID that makes this possible. Never tried it myself.
    https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

  • How to exit from a WebDynpro ABAP application and open another url

    Hi Friends,
    How to exit from a WebDynpro ABAP application and open another url like (www.yahoo.com) in the same window of the WD4 application on click of a Button?
    Regards,
    Xavier

    Hi,
    First of all you should create outbound plug in the window you are trying to exit with plufg type "Exit"
    Then create method handler in the view with this code
            data lo_view_cntr type ref to if_wd_view_controller.
            data lo_win_cntr type ref to if_wd_window_controller.
            data: l_parameter_list type wdr_event_parameter_list,
                  l_parameter type wdr_event_parameter,
                  l_val type ref to data,
                  l_val_url type REF TO data.
            field-symbols: <fs> type any,
                           <fs_url> type any.
            lo_view_cntr  = wd_this->wd_get_api( ).
            lo_win_cntr = lo_view_cntr->get_embedding_window_ctlr( ).
            CREATE DATA l_val type c.
            CREATE DATA l_val_url type string.
            ASSIGN l_val->* to <fs>.
            ASSIGN l_val_url->* to <fs_url>.
            <fs> = 'X'.
            <fs_url> = 'http://your-link.com'.     
            l_parameter-name = 'URL'.
            l_parameter-value = l_val_url.
            INSERT l_parameter INTO TABLE l_parameter_list.
            lo_win_cntr->if_wd_view_controller~fire_plug( EXPORTING plug_name = 'EXIT_PLUG'
                                                                    parameters = l_parameter_list ).
          You can easily change this logic to exit application instead of redirecting to the site
           just changing to
           l_parameter-name = 'CLOSE_WINDOW'.

  • Can I import and open raw files on the new photo app?

    Hi,
    Can I import and open raw files on the new photos app on my ipad?  Does it convert it to jpeg automatically when you want to share them?
    Thanks.

    Clem is telling you to click on the View menu, move the pointer down to the item "Metadata," & from its choices make sure "Show Titles" is selected. Do this, then make sure you are in a view in the main window that shows one or more videos (or whatever) that you want to title. Click once on one of them, & if the separate Info window is not open, open that (on the Windows menu or command + i as a keyboard shortcut). In the Info window the top line will be "Add a Title."
    Click once on that & type your title.
    This works for any item, video or photo.

Maybe you are looking for