How to retrieve the Audio/Video link (final cut pro hd 5)

Hi there, and sorry for my misknowledgement of this soft.
I'd like to know if it's possible once we have delete the audio part of a clip in the timeline to get back the Audio part synchronized with the video.
Thx for help !

Not entirely sure if I'm following you but try this:
Select your video-only clip
Press F on your keyboard to do a Match Frame. The (video & audio) clip should now be loaded into the Viewer with the In & Out matching your timeline clip.
Replace the clip in the timeline with the clip from the Viewer (For most folks/scenarios, that means drag from the Viewer)
Post back if that isn't it.

Similar Messages

How do use the hum remover in final cut pro 5? Help

How do use the hum remover in final cut pro 5? Help!!

Simply drop the effect onto the appropriate audio track. Set the frequency for the hum frequency (50Hz or 60Hz depending on your power supply). Include whichever harmonics you think might be present eg. 100, 150, 200Hz.
Note that I have generally had more success by using Soundtrack Pro's noise removal tool.
Trevor

How do I save a video in final cut pro externally?

I have created a video in final cut pro but cannot seem to export it anywhere. It keeps failing the transfer however I am trying to transfer to large enough storage devices. Any thoughts? Thank you.

In FCP X: File > Share

How to change the white balance in Final Cut Pro?

What is the best way to change the white balance in Final Cut Pro? I have some clips which are to green. I would like if possible something which might resemble the Camera Raw dialogue in Photoshop. Any way of measuring color (RGB values)?

There is some specific help in this trainng book:
http://www.amazon.com/Apple-Pro-Training-Correction-Studio/dp/0321635280/
When using Color Corrector 3-Way to correct for a green tint, the bullet points are something like this:
1) After loading the clip into the Viewer and applying the CC3W filter to the clip, open your scopes and move the window so you can see the Viewer (with the CC3W tab open) and the scopes
2) First, if necessary, adjust the white and black levels using the video level sliders below the white and black color wheels (I use the slider above the scopes to make the trace in th4 scopes as bright as it will go without blooming)
3) Looking at the Parade scope, the idea is to balance the whites, mids, and blacks on each color display (red, green and blue). So you watch the Parade and drag the dot that is in the center of each color wheel (starting with the whites) away from the color of your tint (in your case, green). Drag the dot until the highest portions in all three Parade displays are as even as you can make them
4) Then do the same with the mids, using the Mids color wheel, moving its dot away from green
5) Do the same thing with the blacks
6) Double check the image on an external video display that is properly adjusted using color bars from Final Cut
NOTE: This short reply is not sufficient to fully explain this technique, and you really need to understand Color Theory before doing this anyway. That's why I recommended the training book.

How do I import GoPro video into Final Cut Pro X?

I'm about to purchase Final Cut Pro X (10.1.4). Will I be able to import my GoPro files? Do I have to convert them to another file type? Has anybody imported GoPro video into their projects? I believe that GoPro Studio can convert the video files into GoPro Cineform files that you're supposed to be able to import into 3rd Party Applications such as Final Cut Pro X.
If you have any advice, I would very much appreciate it.
Thanks,
Kiki

I just copy the Gopro MP4 files on to a hard drive then import the media into a FCPX library. I have had no issues with dealing with GOPRO videos, but I am running a Hero 2 and a hero 3+. I am no expert on it, I just do it.

How to compress/adjust imported videos in Final Cut Pro and iMovie?

Left: what the video looks like when played in iPhoto or Quicktime (Dimensions: 960 x 720, Codecs: AAC, H.264) .mov
Right: what the video looks like when played in iMovie or Final Cut Pro.
SOS

the left shot is 4:3 (960/720)
the right shot is a 16:9 project (1920/1080 or 1280/720) with a stretched-to-fit 4.3 video.
If you want an un-stretched project, set it to 4:3 manually when you create a New project, or use the transform-tool and resize the video - which will add bars l/r or chops-off t/b of the video...
or use the Spatial Confirm settings in the Inspector ...

How to choose the right codec in Final Cut Pro?

Hi, I'm new to FCP. I'm using the Final Cut Pro 7 and my video camera is Sony SR1e in AVCHD format 1440 x 1080i. Can someone help me to choose the best codec for project setup? Also is the codec setting for transfering video must match the setting for the sequence? Thank you!

convert to ProRes
Watch this
http://library.creativecow.net/rossshane/tapeless-workflowfcp-7/1

How to get the HPX files into Final Cut Pro 7?

Hey.
I have a small crisis. Hope someone can help as quickly as possible?! Thank you
I'm working on my bachelor project, and has borrowed a Panasonic HPX 170, and will cut in Final Cut Pro 7. Now I have all the files on a hard drive, and they are MFX files.
- How do I get them into FCP?
Many thanks for all your help!

Thanks
But what if the clips are already on my iMac via the hard disk? What you write, is through the camera right?
I've tried to get the files by the camera into FCP, but it did not. It can not find the camera.
Thanks for your answer

I would like to know how to put a karaoke video on Final Cut Pro and then put my voice (singing) over it?

I had bad experience with YouTube tutorials because it's hard to find the right tutorial video that applies to my enquiries, and I have to wait until the right time till the YouTuber gets to the point, and then I have to go back to find the exact spot which I need to see to learn what I want to know how to do.

See, that's what I was getting at -- how basic of a step-by-step instruction did you need? It sounds like you've never actually used the program.
My first suggestion for you is to look at the "More Like This" list on the right side of this page. You'll see similar posts, even ones specific to karaoke. Read those, and see if your question is answered. One person used Garage Band. Maybe that will work better for you than FCP.
As for step-by-step instruction, it's basically place your karaoke video on one track, then add your voice file to an audio track underneath it.

How can I share a video from Final Cut Pro to friends via WhatsApp please?

As titled please.

upload to YouTube/Vimeo
share URL via Whatsapp
Plan B)
share to iTunes
transfer to your iOS device
share video via Whatsapp
keep in mind: video is a bandwidth killer - do your friends like to waste 100s of MBs for a tiny stamp-sized video?

Retrieving imported AVCHD files from Final Cut Pro X

Hi there, does anyone know how to retrieve raw AVCHD clips from Final Cut Pro X, after they have been imported? I shot some footage on my GH2 and it DID import from the camera into FCP X, but it's not running smooth at all. I heard that it's better to convert the files into pro res first, but I wanted to see if it worked. It does work, but not very well. So now I want to find the original video files I imported and convert them into pro res and then import again. Anyone had experience with this?

I think it all comes back to work flow. The whole reason I have opted to convert the original files to pro res is because it is choppy in the timeline when I'm editing. It seems it's true that FCP X really prefers to work with 'optimized media'...or Pro Res instead of reformatted versions of AVCHD. I would like to work with this original format, mainl because the footage isn't as compressed and hasn't lost a generation...and look absolutely pure and gorgeous in high bit rate from my GH2, however, what choice do I have but to convert to Pro Res if I am unable to edit smoothly? I think Ian had the right idea when he said to compare the footage of both, but again, if I can't even edit in AVCHD then what's the point? I think Apple needs to rectify this in the next update as I'm sure there are so many users out there who would prefer editing in this original format. Is there a noticeable loss of quality, that's what I am curious about.

HT5148 export video from final cut pro x

how can i export / share video from Final cut pro x (10.0.7)? i have try different type and even use compressor, but did not see any final product.
thanks

I went into File and then share and then choose the format that i want (master file - default) then i choose a second hard drive in my computer. and nothing happens at all

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How to get the Vimeo encoding in Final Cut Studio / Final Cut Pro (for web)

I have some films I would like to "display" on the web. It seems that vimeo.com has a great way of encoding films for the web.
http://www.vimeo.com/
Anyone who knows how to do the same encoding within Final Cut? Or are there other ways for web which will work also for windows user (to watch the video without downloading extra plugins?
I love how the videos starts almost instantly in hd on Vimeo! Al right it skips a bit, but then again it is hd on the web.....

This is sort of a workaround for what you're trying to achieve:
Here's a Ken Stone article on encoding for Vimeo.
So...what a lot of folks are doing these days, is uploading to Vimeo (or similar service). Then back on your own website simply "embed" the Vimeo movie. You can control the size & control colors of the embed. When you're on the Vimeo page for a particular video, you'll see the "Embed" link on the right of the video. Click that and it will expose the code you need to copy into your own website.

How to setup an artist mix (audio mixer) on final cut pro 7?

how to setup an artist mix (audio mixer) on final cut pro 7?

Hi Meatpuppet,
I'm having the same issue with not getting my audio through to the client on Ichat theater preveiew. I'm on a mac pro with a small DV camera attached via firewire. when I start the chat, the person on the other side sees and hears me fine, but then when I start sharing in FCP, the video switches so that the remote person sees the time line, but loses the audio from me and doesn't hear the audio from the time line...
The manual recommends "disconnecting and external video device" ( then what do us mac pro folks do?)
So my question for you, and I know that you're on and Apogee Duet, is: Was your tinkering in FCP, your system sound settings, or iChat? in other words, where was the disconnect?
thanks.

How to retrieve the Audio/Video link (final cut pro hd 5)

Similar Messages

Maybe you are looking for