How to retrieve username and password that I have created in YouTube app in iPhone?

I found out that YouTube in safari and YouTube app in iPhone it self are different thing. So I have created a username and password in YouTube app. Both username and password I have forgotten. How to retrieve my username and password?? I can't use the playlist without the username and password. Please help.

Hi I'm having the same problem. Did u find a solution?

Similar Messages

  • I have Iphone 4s, and the phone will activate itself again. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? I would like an answer as soon as possible ... Thank you very much.

    I have Iphone 4s, and the phone will activate itself again. This I have verified, but when I shall put this onto my phone, so the phone will not approve the newusername and password. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? Silly to buy a new phone just for this .... The phone is almost three years old. How long can weexpect this to last? I would like an answer as soon as possible ... Thank you very much.

    It sounds like your device might be in Activation Lock.  Is it asking your to enter in an Apple ID & password, but only showing you the first letter of the email address and then some dots? Example: j•••••@icloud.com?
    If so, do you recognize that email?  Do you have an Apple ID that fits the same format?  If so, then go to www.cloud.com, log in with that Apple ID & password, and see if under Find My iPhone it shows this device.  If so, turn off the device, then remove the device from the list.

  • Hello How do I set up Firefox 8.0 so that It will Ask me if I want to save a Password for a website. At present I don't get an option every time I go into a website that I know is secure I have to enter username and password. I have been though tools etc.

    Hello How do I set up Firefox 8.0 so that It will Ask me if I want to save a Password for a website. At present I don't get an option every time I go into a website that I know is secure I have to enter username and password. I have been though tools etc.
    Thank you any help would be help full as every time I log into Face Book for example I have to provide all the Information and this is a pain
    Cheers Alex

    The website may be using autocomplete=off to prevent Firefox from saving the name and password.
    You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
    *http://kb.mozillazine.org/User_name_and_password_not_remembered
    *Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

  • Where do I find username and password that ISP gave me???

    I'm trying to connect my new laptop to my Linksys E4200, but I have long forgotten the username and password that the ISP gave me. How do I find them or reset them? I'm lost!!

    Hi betsybrat,
    The following link might help:
    Checking the Linksys router’s wireless settings through the web-based setup page

  • How to pass username and password with the portal url

    i want to access portal from my web site. i have created username and password fields in my web page. when submited , my portal page should open. so how to pass username and password with the portal url.

    This is not straightforward; but it is doable.
    First tell us about your portal version; portal 10.1.4 has a slightly different method of doing it and the pre-10g portals were completely different animals.
    And if you are in AS Rel 2, then the most important document for you would probably be the following:
    [Creating Deployment Specific Pages| http://download-west.oracle.com/docs/cd/B14099_19/idmanage.1012/b14078/custom.htm#i1015535]
    You might want to use it in conjunction with some metalink notes about your portal version and such a login page.
    hope that helps!
    AMN

  • I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

    I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

    I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

  • Why is it that I can't sign in on facetime, but I can sign in on app.store? With facetime,I'm getting an error, invalid username and password eventhough I have typed exactly the same when I'm signing in on the app.store. pls.help, thanks

    Why is it that I can't sign in on facetime, but I can sign in on app.store? With facetime,I'm getting an error, invalid username and password eventhough I have typed exactly the same when I'm signing in on the app.store. pls.help, thanks

    1. Make sure software is up to date
    2. Make sure FaceTime is enabled; Settings>FaceTime
    3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
    4. Make sure Push Notification is enabled
    5. Make sure phone number or email address is correct
    6. Hold the Sleep and Home button down (together) until you see the Apple Logo

  • How to retrieve username and domain name on Macintosh.

    Hi,
    Can anyone tell me how to retrieve username and domain name on Macintosh
    Thanks
    Priyanka.

    There is no system property for the domain name.
    Can you please tell me some other way for solving
    this problem.No. If it's not an environment variable (System.getEnv IIRC) and no property, you can't get it without native calls using JNI or Runtime.exec/Process.

  • Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

    Hello, i am having problems getting face time to work, I keep getting an error message saying the server could not process the registration, I am using the username and password I always have and it has always worked in the past, any ideas?

    We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?

  • How I can erase the components that I have created in a content area?

    hello. Somebody knows how I can erase the components that I have created in a content area. I have created an area of content and the archives, categorias or perspective that I generate not let erase. The same it happens to me to the forms, reports and other components created under a certain application

    goto portal navigator --> content areas --> next to the content area --> click Edit Properties --> Items tab --> last button on the page is Purge..
    this should take care of it

  • How do I delete Pages templates that I have created?

    How do I delete Pages templates that I have created?

    Pages stores those you created & saved as templates in (your account) > Library > Application Support > iWork > Pages > Templates > My Templates. The user's Library is hidden in Lion & Mountain Lion but it is easy to open. In Finder, hold down the Option key while clicking on the Go menu & your user Library will appear about halfway down the list. Or you can choose Go to Folder from the Go menu in Finder & paste this line in the box:
    ~/Library/Application Support/iWork/Pages/Templates/My Templates/

  • How do I change a previously saved (in Firefox) online username and password that has now changed?

    I try to navigate to the login OR homepage of a password protected site and it sends me into a loading loop or "invalid user name" error page (depending on which portal I attempt to enter through). How do I reset the username and password saved in Firefox? I tried deleting the sites and associated passwords in the security options tab already and it hasn't worked.

    Arantha,
    Click the document name at the top of the Pages window and choose Browse Versions. See if any of your late changes are there. Also, use Finder to search for files with a similar name, since it's possible that your latest changes were made to a copy of the document and you may be able to find that copy if that's the case.
    Jerry

  • How-to access username and password protected Java EE Web services from ADF

    The title of this post is exactly the same as this article by Frank Nimphius:
    http://www.oracle.com/technology/products/jdev/howtos/1013/protectedws/access_protected_web_services_from_adf.htm
    The article addresses the problem of securing web services using usernames and passwords, when those web services are accessed through a proxy or a data control. In the examples, the user names and passwords are specified, whether in the code or the definition of data controls. (SKING/SKING).
    In a very common scenario, users login to reach a page, for example, A.jspx, which contains a button that calls a web service, for example displayDate. Suppose that user has logged in by username/pass of (AHUNOLD/AHUNOLD) and AHUNOLD has access to the service and the page. Is there any way to pass the logged in user name and password to the webservice ? Of course we can hard-code the username in the data control definition or proxy code, but this is just one of the thousands of users who have access to the service and the authentication is not dynamic this way.
    Hope my question is clear. Wishing you all a great Christmas.
    Farbod

    Hi Frank, and happy new year.
    Are you implying that it couldn't be done declaratively? What is your suggestion for this problem? You know the problem... As I described:
    - I need to secure my web services, so when exposed, no one from inside network or the internet, can access the web service without proper permission
    - The web services are shown as web controls on jspx pages. The user has logged in before reaching the page. It is irrelevant to ask him to enter user name and password again.
    - I have user names, passwords and roles in Oracle Internet Directory (Identity Management). It provides some APIs and I can retrieve the usernames and attempt logging in programmically. But how can I get username and password from the session in ADF application?
    I guess using SAML or certificate could be the solution, but I have a problem with SAML, described here:
    Re: Webservices Security, SAML, and Identity Management (OID)
    Best Regards,
    Farbod

  • How to set username and password before redirecting to a RESTful webservice

    I am a .Net developer who has developed a webservice used by my ColdFusion colleagues. They are using ColdFusion 9 but I'm not sure if they have incorporated any of the newer features of ColdFusion in their apps. Here is a snippet of how they have been invoking the webmethods:
    <cfscript>
                         ws = CreateObject("webservice", "#qTrim.webServiceName#");
                         ws.setUsername("#qTrim.trimAcct#");
                         ws.setPassword("#qTrim.trimpwd#");
                         wsString=ws.UploadFileCF("#qTrim.webserviceurl#","#objBinaryData#", "#qFiles.Filename#", "Document", "#MetaData#");
                </cfscript>
    As I understand things, the .setUsername and .setPassword correspond to the Windows credentials the CF Admin set when the URL of the .Net webservice was "registered" and given its "name" (for the CreateObject statement above). I have 4 webmethods that are all invoked in this manner and this SOAP protocol works adequately for us. Please note that this ColdFusion web app authenticates anonymous remote internet users by prompting for a username and password and compares them to an application database (i.e. Microsoft calls this "forms authentication"). Because only a few Windows domain accounts are authorized to call this .Net webservice, the above code always uses the same username/password constants and it all works.
    My question involves the newest webmethod added to the .Net webservice. It requires that callers must invoke it as a RESTful service which means it must be invoked by its URL. Here is a snippet of C# code that invokes it from an ASP.NET webclient:
                string r = txtRecordNumber.Text;
                string baseurl = "http://localhost/sdkTrimFileServiceASMX/FileService.asmx/DownloadFileCF?";
                StringBuilder url = new StringBuilder(baseurl);
                url.Append("trimURL="); url.Append(txtFakeURLParm.Text);
                url.Append("&");
                url.Append("TrimRecordNumber="); url.Append(txtRecordNumber.Text);
                Response.Redirect(url.ToString());
    I assume a ColdFusion script could easily build a full URL as above with appended querystring parameters and redirect. Is there some way for the CF code redirecting to a RESTful webservice (by way of its URL) to set the Username and Password to this Windows account mentioned above? When the DownloadFileCF webmethod is hit it must be with the credentials of this special Windows domain account. Can that be set by ColdFusion someway to mimic the result of the SOAP technique (the first snippet above).
    I hope my question is clear and someone can help me make suggestions to my ColdFusion colleagues. Thanks.

    Can you clarify what you mean by "establish a different Windows identity"?  Usually passing identity to a web site or service means adding something to the request's HTTP headers.  This could be a cookie in the case of .NET forms authentication or the "Authorization" header in the case of basic authentication.
    The SOAP web service invocation code you posted does use basic authentication, according to the CF docs "ColdFusion inserts the user name/password string in the authorization request header as a base64 binary encoded string, with a colon separating the user name and password. This method of passing the user name/password is compatible with the HTTP basic authentication mechanism used by web servers."
    http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec13a13 -7fe0.html
    If you need to mimic the SOAP techinque you should have basic authentication enabled for your REST service endpoints.
    If your authentication method is different then CF developers will need to add the appropriate HTTP headers to their service calls.  Note that calling a REST service from CF would probably be accomplished using the CFHTTP tag if the service is designed to be consumed by the CF server.

  • How to supply username and password for consuming webservice in BizTalk Adaptor?

    While I hit the web service directly , I am able get response from that service, it asked for username and password, after that it processed the request and gave expected output. I am trying to consume the same web service (https) from BizTalk orchestration
    ,  it created message type , port type, binding for me , all fine, but while sending message to the webservice , it throws error like this 
    <SOAP-ENV:Fault xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wd="urn:com.abc/bsvc">
    <faultcode>SOAP-ENV:Client.authenticationError</faultcode>
    <faultstring>invalid username or password</faultstring>
    </SOAP-ENV:Fault>
    I have given username and passoword in port level. I tried basic binding, I also tried wcf_basic binding , but no luck. These bindings were generated by wizard only, I Imported those bindings , ports got created, I just added username and password in the
    port level.
    How should I supply username and password in BizTalk to get this working ? Any inputs would be greatly appriciated
    Regards
    Vivek

    Hi,
    the way to resolve this is to write a Wcf Custom Behavior.
    Several people have blogged about this and Microsoft have written some articles:
    http://social.technet.microsoft.com/wiki/contents/articles/627.using-custom-behaviors-with-the-biztalk-wcf-adapters-part-2.aspx
    http://msdn.microsoft.com/en-us/library/cc952299(v=bts.10).aspx
    The articles are old so you need to verify they still apply.
    mark

Maybe you are looking for

  • My iPod won't sync because of issue with the back-up software

    I have recently purchased an iPhone 4 and synced it with my itunes library on my PC and then updated the software to 5.0.  I already had an iPod touch (4th generation) and now when i try and sync it with the library it says "back-up corrupt or incomp

  • XML to hierarchical table

    I would like to convert XML in to a simple table structure, with: - 1 row per tag - a tag_id for each tag - a parent tag_id for each tag - the attribute for each tag E.g. for the following DROP TABLE test_xml; CREATE TABLE test_xml OF XMLType; INSERT

  • How to see list of Pending Scheduled reprots?

    Hi in XIR2 i have total of 60 reports in Repository if I click on each report history can see the instance history i have couple of them in Recurring how to see the list of the scheduled documents waiting ?? thanks

  • How to allows decimal place for unit of measure of order confirmation

    Hi Guys we have some special cases here that need to confirm the order quantity as decimal place,is that possible made some customizing in code CO11N? or have some ways support it ..... ex. work order A   10 EA - operation 1   : colse 10 EA - operati

  • IWeb??  Publish not working.

    I created a website using photos from my iPhoto.  I used the iWeb in iPhoto.   I completed the page and then "published" it.   But it is not working.   It says HTML not available.   Am I leaving out a step?   Thank you.   I have an iMac G5.   Can you