How to retrive the archive PR

How to retrive the archive PR
or
anyway that user can view it in display mode
Edited by: shakir on Jun 5, 2010 2:07 PM

Check this link
[retrive the archive PR|http://help.sap.com/erp2005_ehp_03/helpdata/EN/8d/3e4b63462a11d189000000e8323d3a/frameset.htm]

Similar Messages

How to retrive the archived (in PDF) smartform as a email attachment.

Hi ,
I have a requirement where the smartform is archived in PDF mode and I have to retrieve the archived smartfrom and send the mail with PDf attachment.
I referred the sdn forum for the same and I could some posts posted earlier and quite a few are solved. I implemented the sample code provided by some of the posts and I still get the same error when I try to open the mail/attachment in SOST transaction. But I didnt understand what exactly they did to get away with the error when we try to open the attachment.
Please help me with the correct code to get this issue solved.
Thanks a lot in advance.
Regards,
Naresh

Hi Sim,
The Error says:
"Adobe reader could not open 'InvoiceDetails_20110228094610.709_X.pdf' because it is either not a supported file or because the file has been damaged(for example, it was sent as an email attachment and wasn't correctly decorded).
Below is the sample code that I got from one of the forum postings. I implemented the same and got the same error that the earlier posting was referring. From that step, I didnt know what to do further.
*// Internal Table Declarations
DATA : li_toa01 TYPE TABLE OF toa01,
 li_archivobject TYPE TABLE OF docs,
 li_binarchivobject TYPE TABLE OF tbl1024,
 li_objcont TYPE TABLE OF soli,
 li_receivers TYPE TABLE OF soos1.
*// Work Area Declarations
DATA : lwa_toa01 TYPE toa01,
 lwa_objcont TYPE soli,
 lwa_receivers TYPE soos1,
 lwa_archivobject TYPE docs,
 lwa_binarchivobject TYPE tbl1024.
*// Variable Declaration
DATA : lv_length TYPE num12,
 lv_binlength TYPE num12,
 lv_buffer TYPE xstring,
 lv_x TYPE i.
DATA : wa_objbin TYPE solisti1,
 i_objbin TYPE TABLE OF solisti1,
 wa_objtxt TYPE solisti1,
 i_objtxt TYPE TABLE OF solisti1.
DATA : wa_doc_chng TYPE sodocchgi1,
 w_l1 TYPE i.
DATA : wa_objpack TYPE sopcklsti1,
 i_objpack TYPE TABLE OF sopcklsti1.
DATA : wa_reclist TYPE somlreci1,
 i_reclist TYPE TABLE OF somlreci1.
CALL FUNCTION 'ARCHIVOBJECT_GET_TABLE'
 EXPORTING
 archiv_id = 'ZF'
 document_type = 'PDF'
 archiv_doc_id = 'DF88D06227DFAEF1A31D0050568361B1'
* ALL_COMPONENTS =
* SIGNATURE = 'X'
* COMPID = 'data'
 IMPORTING
 length = lv_length
 binlength = lv_binlength
 TABLES
 archivobject = li_archivobject
 binarchivobject = li_binarchivobject
* EXCEPTIONS
* ERROR_ARCHIV = 1
* ERROR_COMMUNICATIONTABLE = 2
* ERROR_KERNEL = 3
* OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT li_binarchivobject INTO lwa_binarchivobject.
CONCATENATE lv_buffer lwa_binarchivobject-line INTO lv_buffer
IN BYTE MODE.
ENDLOOP.
lv_x = 0.
DO.
wa_objbin-line = lv_buffer+lv_x.
APPEND wa_objbin TO i_objbin.
lv_x = lv_x + 255.
IF lv_x GT lv_binlength.
 EXIT.
ENDIF.
ENDDO.
wa_objtxt = 'Test Mail'.
APPEND wa_objtxt TO i_objtxt.
CLEAR wa_doc_chng.
wa_doc_chng-obj_name = 'Invoice Details'.
wa_doc_chng-obj_descr = 'Invoice Details'.
DESCRIBE TABLE i_objtxt LINES w_l1.
READ TABLE i_objtxt INTO wa_objtxt INDEX w_l1.
wa_doc_chng-doc_size = ( w_l1 - 1 ) * 255 + strlen( wa_objtxt ).
CLEAR wa_objpack-transf_bin.
wa_objpack-head_start = 1.
wa_objpack-head_num = 0.
wa_objpack-body_start = 1.
wa_objpack-body_num = w_l1.
wa_objpack-doc_type = 'PDF'.
APPEND wa_objpack TO i_objpack.
CLEAR wa_objpack.
wa_objpack-transf_bin = 'X'.
wa_objpack-head_start = 1.
wa_objpack-head_num = 1.
wa_objpack-doc_type = 'DAT'.
wa_objpack-body_num = w_l1 .
wa_objpack-doc_size = w_l1 * lv_binlength .
wa_objpack-obj_name = 'TEST'.
wa_objpack-obj_descr = 'Naresh'.
APPEND wa_objpack TO i_objpack.
wa_reclist-receiver = -->emailaddress given.
wa_reclist-rec_type = 'U'.
APPEND wa_reclist TO i_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
packing_list = i_objpack
* OBJECT_HEADER =
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc = 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Retrive the archive sales order

Hi gurus,
Can we retrive the archived sales order?
How?
thanx in advance.
rgds,
Anand

Hi,
goto SE11 - give the table name CDHDR.
you can find out your deleted sales orde number.
regards,
Sumith

*HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY*

HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY
I have set the RMAN CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY; on my physical standby server.
My archivelog files are not deleted on standby.
I have set the CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default on the Primary server.
I've checked the archivelogs with the FRA and they are not beign deleted on the STANDBY. Do I have to do something for the configuation to take effect? Like run a RMAN backup?
I've done a lot ofresearch and i'm getting mixed answers. Please help. Thanks in advanced.
J

Setting the Policy will not delete the Archive logs on the Standby. ( I found a thread where the Data Guard product manager says "The deletion policy on both sides will do what you want" ). However I still
like to clean them off with RMAN.
I would use RMAN to delete them so that it can use that Policy are you are protected in case of Gap, transport issue etc.
There are many ways to do this. You can simply run RMAN and have it clean out the Archive.
Example :
#!/bin/bash
# Name: db_rman_arch_standby.sh
# Purpose: Database rman backup
# Usage : db_rman_arch_standby <DBNAME>
if [ "$1" ]
then DBNAME=$1
else
echo "basename $0 : Syntax error : use . db_rman_full <DBNAME> "
exit 1
fi
. /u01/app/oracle/dba_tool/env/${DBNAME}.env
echo ${DBNAME}
MAILHEADER="Archive_cleanup_on_STANDBY_${DBNAME}"
echo "Starting RMAN..."
$ORACLE_HOME/bin/rman target / catalog <user>/<password>@<catalog> << EOF
delete noprompt ARCHIVELOG UNTIL TIME 'SYSDATE-8';
exit
EOF
echo `date`
echo
echo 'End of archive cleanup on STANDBY'
mailx -s ${MAILHEADER} $MAILTO < /tmp/rmandbarchstandby.out
# End of ScriptThis uses ( calls an ENV) so the crontab has an environment.
Example ( STANDBY.env )
ORACLE_BASE=/u01/app/oracle
ULIMIT=unlimited
ORACLE_SID=STANDBY
ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
LIBPATH=$LD_LIBRARY_PATH:/usr/lib
TNS_ADMIN=$ORACLE_HOME/network/admin
PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
#export TERM=linux=80x25 wrong wrong wrong wrong wrong
export TERM=vt100
export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
export ORACLE_HOME
export LIBPATH LD_LIBRARY_PATH ORA_NLS33
export TNS_ADMIN
export PATH
export MAILTO=?? your email hereNote use the env command in Unix to get you settings.
There are probably ten other/better ways to do this, but this works.
other options ( you decide )
Configure RMAN to purge archivelogs after applied on standby [ID 728053.1]
http://www.oracle.com/technetwork/database/features/availability/rman-dataguard-10g-wp-1-129486.pdf
Maintenance Of Archivelogs On Standby Databases [ID 464668.1]
Tip I don't care myself but in some of the other forums people seem to mind if you use all caps in the subject. They say it shouting. My take is if somebody is shouting at me I'm probably going to just move away.
Best Regards
mseberg
Edited by: mseberg on May 8, 2012 11:53 AM
Edited by: mseberg on May 8, 2012 11:56 AM

How to retrive the data from a sqlite file(.db3) in windows phone 8.1(runtime)

hey guys
i installed the sqlite and sqlite-net as requested in other answers i found, changed to x86, and add the .db3 file in my project.
but the problem is how to retrive the data that already in the file( i am not creating any table or data in the app, just read)
all the answer i found is to create a table first and then read the table, i tried to skip the step of creating a table, and read from the table directly, but failed with " no such table", by the way, i set the property of the .db3 file as "content",
"copy if newer"
can anyone please help? i appreciate that !

Hello,
From your description, you want to read data from available sqlite file. When you add the sqlite file into your project, you need to change the sqlite file build action to content. After deploying to device, the sqlite file is located in installation folder,
you need to copy that file into storage folder before reading data. Please try the following code snippets.
private async void Button_Click_9(object sender, RoutedEventArgs e)
//check if file exists in storage folder, and then copy to local storage
bool flag = await FileExistsAsync("Data.db3");
if (!flag)
var folder = await Package.Current.InstalledLocation.GetFileAsync("Data.db3");
await folder.CopyAsync(Windows.Storage.ApplicationData.Current.LocalFolder);
// open sqlite and read data
public async Task<bool> FileExistsAsync(string fileName)
try
await Windows.Storage.ApplicationData.Current.LocalFolder.GetFileAsync(fileName);
return true;
catch (FileNotFoundException)
return false;
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

How to retrive the deleted data in Z table

Hi Gyes,
How to retrive the deleted data in Z table.
Thanks & Regards,
Suresh

Hello Suresh
If you have not activated the technical setting "Log data changes" in the definition of your z-table (which is unlikely) then there will be no change documents available.
If you have downloaded your z-table entries sometimes you could use these data for recovery.
Otherwise your last change is to ask your basis team when the last backup has been made.
Regards
Uwe

How to retrive the deleted entries in the ztable

please let me know how to retrive the deleted entries in the ztable.

>
Naseer uddin wrote:
> Hi,
>
> While creating a table have u activated the buffering (full).
> if not then it is not possible to retrive the lost data, and if u have activated the full buffering of table then it is possible to retrive data, up to some extent, using transaction Code se14.
Complete Nonsense.*
buffering doesn't mean that it will buffer the records back in database ,once you deleted.it means it will allow the buffer the table to memory only while read access.

How to retrive the overwritten SAP Default Configuration

Hi There,
I was trying to enhance the component BT115IT_SLSO to add some new fields into the table view Items.
I copied the view configuration to my Z config key but by mistake & added the fields into the default view and saved the changes. Now the default configuration is screwed up.
Can some one point out how to retrive the SAP standard configuration( where it is stored ). In the configuration tab of the view the configuration looks ok but in Web UI I see all the columns available in the context node, and makes the view useless, when I go to the personlization of the view all fields shows the message < Error in Meta data > and I can not see the details of the fields.
I have already backed off my enhancement. Now I want to retrive the view configuration.
Your help will be highly appreciated.
Thanks,
Vikash.

Issue resolved.
Solution was In BSP workbench when I went to choose configuration I saw that just next to std conf there was column for cust conf. and both were marked X so I deleted the conf and that gave me the standard conf back.
Thanks,
Vikash.

PLEASE HELP ME. Some important emails have gone to an archive mail box and i really need them. Can someone please help me with how to view the archive email box and the emails that are in there?

PLEASE HELP ME. Some important emails have gone to an archive mail box and i really need them. Can someone please help me with how to view the archive email box and the emails that are in there?

http://kb.mozillazine.org/Recovering_deleted_mail_accounts

MessageFileUpload how to retrive the file name?

Hi there guys,
maybe it's a stupid question but i cannot find the answer :_( any of you knows how to retrive the file name i am going to upload from the messageFIleUpload item?
Thank You, Pier Paolo.
Edit: Found in another post!! eeheh LAZY ME!! :_)
Message was edited by:
PandreoL

Nice to know that you found the solution. You could have as well used the javadoc for the same.
--Shiv

How to access the archive folder in jive forums programiticaaly

hi
how to access the archive folder in jive forums programitically using weblogic 10.3
Thanks
Rani

Ah, I'm sorry - I thought it was the private folder in C drive that I had managed to get into the previous week but it was the private folder in mass storage ...
If you want to thank someone, just click on the blue star at the bottom of their post

Please help how to save a movieclip in flash to svg...and how to retrive the saved svg to movieclip in flash?

hi all
please help how to save a movieclip in flash to svg...and how
to retrive the saved svg to movieclip in flash?
thanks

Do you mean from flash in a web page or do you mean
converting the swf file format (maybe with a decompiler or
whatever).
If you're meaning to do it from flash in a web page:
You can't save a movieclip from flash to svg. You could
perhaps record drawingAPI commands and create the appropriate svg
output in an internal xml object which you then send to the server.
But I don't know of any pre-built classes to do that (disclaimer:
because I don't know of any doesn't mean they don't exist).
Going from svg to flash is doing it the other way around.
Converting the svg paths back to actionscript drawing commands. I
think I've seen some examples of this online somewhere.

How to disable the archive logs in SAP IDES(Windows) using SQL Server

can any body tell us How to disable the archive logs in SAP IDES(Windows 2003) using SQL Server 2000.SP4.?

Hi,
Unfortunately, SQL Server does not have the option to turn off transaction logging. You can set the recovery mode to SIMPLE, instead of FULL. This will result in the transaction log being truncated on checkpoint.
http://support.microsoft.com/kb/873235 - check this microsoft article
This will help in reduction of the size of the transcation log.
- Regards, Dibya

How to retrive the purchase agreement/promotion using sale order number

Hi ,
I am an ABAPER . I need a flow for *sale order to purchase agreement/promotion *
My query is how to retrive the purchase agreement/promotion (VBAK-KNUMA is blank for all ) using sale order number ?
Thanks
Sree
Edited by: Sree Merugu on Sep 11, 2008 6:58 PM

Hi ,
I am an ABAPER . I need a flow for *sale order to purchase agreement/promotion *
My query is how to retrive the purchase agreement/promotion (VBAK-KNUMA is blank for all ) using sale order number ?
Thanks
Sree
Edited by: Sree Merugu on Sep 11, 2008 6:58 PM

Can you please how to retrive the new netprice from the new validity period

Hi,
When you display a contract using ME33K and you click on a item and view its conditions(shift+F6), there might be 2 validity periods for a given item.
and each period will have different netprice in it.
One will be old date before the PO was created and the other new one which has validity till 31.12.999..We want to fetch the netprice for the new validity date but currently the program is fetching this data from the table EKPO which is having the netprice of the old date only..
Can you please how to retrive the new netprice from the new validity period

Thank you so much.
But I need more help specific to my problem.
Let me describe the same.
Suppose the PO creation date is 04.07.2007
The conditions for an item in a contract for the PO are as follows;
1. Validity from 04.07.2007 validity to 04.07.2007 Netprice = 100.00
2. Validity from 05.07.2007 validity to 31.12.9999 Netprice = 200.00
We need to always fetch the netprice from the validity period which always matches with the PO creatio date. here the value 100.00 should be the correct netpr as the PO creation date matches with the first validity period.
But the program is fetching the netprice 200.000 which belongs to the second validity period. That is beacuse the select statement which fetches the data for contracts collects on the basis of EKKO-kdate and ekko-kdtab.the fields kdate and kdtab retrieves the validity period of the contract which is from 04.07.2007 to 31.072007. This data is then used to retrieve the netpr data from EKPO and it fetched 200.00 as it retrives the netprice of current data in contract validity and h not with respect to PO creation date.
This data is then used to fetch the get the netpr data from EKPO.
what we need is the netprice for that validity period of item(Conditions) that matches with the PO creation date..
Below is the code where I'm selecting the data from ekko and ekpo for the contracts data..Can you please add the code snippet to the below attachesd subroutine to get the required data from KONV and KONP so that we can retrieve the correct Netprice.
FORM select_contracts USING p_s_cebeln LIKE s_cebeln[]
 p_c_k_bstyp TYPE ebstyp
 p_p_bukrs TYPE bukrs
 p_p_ekorg TYPE ekorg
 p_p_ekgrp TYPE bkgrp
*Begin of Mod-004
 fp_p_cernam type ty_r_ernam
 p_p_cernam TYPE ernam
*End of Mod-004
 p_s_werks LIKE s_werks[]
 p_s_matnr LIKE s_matnr[]
 p_s_lifnr LIKE s_lifnr[]
 p_s_val_dt LIKE s_val_dt[].
*mod-002
 data : l_amount type BAPICURR_D, " Net price
 l_waers TYPE waers, " Currency Key
 l_eff_amount type BAPICURR_D. " Effective value
 data: l_v_netpr type bprei.
*mod-002
SELECT ebeln
 bukrs
 bstyp
 aedat
 ernam
 lifnr
 zterm
 ekorg
 ekgrp
 waers
 wkurs
 kdatb
 kdate
 inco1
 INTO TABLE i_ekko
 FROM ekko
 WHERE ebeln IN p_s_cebeln
 AND bstyp EQ p_c_k_bstyp
 AND bukrs EQ p_p_bukrs
 AND ekorg EQ p_p_ekorg
 AND ekgrp EQ p_p_ekgrp
*Begin of Mod-004
 AND ernam EQ p_p_cernam
 AND ernam IN fp_p_cernam
*End of Mod-004
 AND lifnr IN p_s_lifnr
 AND ( kdatb IN p_s_val_dt OR kdate IN p_s_val_dt ).
IF sy-subrc EQ 0.
Populates internal table i_ekpo using EKPO table.
 SELECT ebeln
 ebelp
 loekz
 txz01
 matnr
 werks
 ktmng
 menge
 meins
 bprme
 netpr
 peinh
 webaz
 mwskz
 uebto
 untto
 erekz
 pstyp
 knttp
 repos
 webre
 konnr
 ktpnr
 ean11
 effwr
 xersy
 aedat
 prdat
 INTO TABLE i_ekpo
 FROM ekpo
 FOR ALL ENTRIES IN i_ekko
 WHERE ebeln = i_ekko-ebeln
 and aedat = i_ekko-aedat
 AND werks IN p_s_werks
 AND matnr IN p_s_matnr.
LOOP AT i_ekpo INTO rec_ekpo.
 MOVE rec_ekpo-ebeln TO rec_contr-ebeln.
 MOVE rec_ekpo-ebelp TO rec_contr-ebelp.
 MOVE rec_ekpo-loekz TO rec_contr-loekz.
 MOVE rec_ekpo-txz01 TO rec_contr-txz01.
 MOVE rec_ekpo-matnr TO rec_contr-matnr.
 MOVE rec_ekpo-werks TO rec_contr-werks.
 MOVE rec_ekpo-ktmng TO rec_contr-ktmng.
 MOVE rec_ekpo-menge TO rec_contr-menge.
 MOVE rec_ekpo-meins TO rec_contr-meins.
 MOVE rec_ekpo-bprme TO rec_contr-bprme.
 MOVE rec_ekpo-netpr TO rec_contr-netpr.
 move l_v_netpr TO rec_contr-netpr.
mod-002
 read table i_ekko into rec_ekko with key
 ebeln = rec_ekpo-ebeln.
 l_waers = rec_ekko-waers.
CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
EXPORTING
 currency = l_waers
 amount_internal = rec_contr-netpr
IMPORTING
 AMOUNT_EXTERNAL = l_amount.
 rec_contr-netpr = l_amount.
mod-002
 MOVE rec_ekpo-peinh TO rec_contr-peinh.
 MOVE rec_ekpo-webaz TO rec_contr-webaz.
 MOVE rec_ekpo-mwskz TO rec_contr-mwskz.
 MOVE rec_ekpo-uebto TO rec_contr-uebto.
 MOVE rec_ekpo-untto TO rec_contr-untto.
 MOVE rec_ekpo-erekz TO rec_contr-erekz.
 MOVE rec_ekpo-pstyp TO rec_contr-pstyp.
 MOVE rec_ekpo-knttp TO rec_contr-knttp.
 MOVE rec_ekpo-repos TO rec_contr-repos.
 MOVE rec_ekpo-webre TO rec_contr-webre.
 MOVE rec_ekpo-konnr TO rec_contr-konnr.
 MOVE rec_ekpo-ktpnr TO rec_contr-ktpnr.
 MOVE rec_ekpo-ean11 TO rec_contr-ean11.
 MOVE rec_ekpo-effwr TO rec_contr-effwr.
mod-002
 CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
 EXPORTING
 currency = l_waers
 amount_internal = rec_contr-effwr
 IMPORTING
 AMOUNT_EXTERNAL = l_eff_amount.
 rec_contr-effwr = l_eff_amount.
*mod-002
 MOVE rec_ekpo-xersy TO rec_contr-xersy.
 APPEND rec_contr TO i_contr.
 CLEAR: rec_ekpo,rec_contr.
mod-002
 CLEAR : rec_ekko,l_amount, l_eff_amount,l_waers.
mod-002
 ENDLOOP.
Modifying i_contr using i_ekko.
 SORT i_ekko BY ebeln.
 LOOP AT i_contr INTO rec_contr.
 READ TABLE i_ekko INTO rec_ekko WITH KEY
 ebeln = rec_contr-ebeln
 BINARY SEARCH.
 MOVE rec_ekko-bukrs TO rec_contr-bukrs.
 MOVE rec_ekko-bstyp TO rec_contr-bstyp.
 MOVE rec_ekko-aedat TO rec_contr-aedat.
 MOVE rec_ekko-ernam TO rec_contr-ernam.
 MOVE rec_ekko-lifnr TO rec_contr-lifnr.
 MOVE rec_ekko-zterm TO rec_contr-zterm.
 MOVE rec_ekko-ekorg TO rec_contr-ekorg.
 MOVE rec_ekko-ekgrp TO rec_contr-ekgrp.
 MOVE rec_ekko-waers TO rec_contr-waers.
 MOVE rec_ekko-wkurs TO rec_contr-wkurs.
 MOVE rec_ekko-kdatb TO rec_contr-kdatb.
 MOVE rec_ekko-kdate TO rec_contr-kdate.
 MOVE rec_ekko-inco1 TO rec_contr-inco1.
 MODIFY i_contr FROM rec_contr.
 ENDLOOP.
ENDIF.
REFRESH: i_ekko,
 i_ekpo.
CLEAR : rec_ekko,
 rec_ekpo,
 rec_contr.
ENDFORM. "select_contracts
Thanks.

How to retrive the archive PR

Similar Messages

Maybe you are looking for