How to return a integer from Userdefined function????

Hi All,
I have an Userdefined funtion which is getting an integer value from a RFC call. Now I want to pass this int value to a target field of type int. The problem I am facing is Userdefined function can only return String value and I have tried the Container also, but no result.
Any views on how to handles this issue
Regards,
Raks

Raks,
just return the integer as a string. There should be no problem. Use:
return String.valueOf(a);
Regards,
Henrique.

Similar Messages

How to return a table from function

Hi,
I want to return a table from the function. But i'm unable to do it.
can any one give me a peice of code.
Thanks in advance.
Regards,
Alok

Are you referring to a pipelined table function?
Here is an example of such a function returning a "hailstone" sequence.. a number range that always end in 4,2,1. (see the [url http://en.wikipedia.org/wiki/Collatz_conjecture]Collatz Conjecture for more details on the maths used).
SQL> create or replace type TNumbers is table of number;
2 /
Type created.
SQL>
SQL> create or replace function hailstone( nValue number ) return TNumbers pipelined is
2 n number;
3 begin
4 n := nValue;
5 loop
6 PIPE ROW( n );
7 exit when n = 1;
8
9 if MOD(n,2) != 0 then
10 n := (n * 3) + 1;
11 else
12 n := n / 2;
13
14 end if;
15 end loop;
16 end;
17 /
Function created.
SQL> show errors
No errors.
SQL>
SQL>
SQL> select * from TABLE( hailstone(10) );
COLUMN_VALUE
10
5
16
8
4
2
1
7 rows selected.
SQL> select * from TABLE( hailstone(1923413) );
..etc.

[UIX] How To: Return multiple values from a LOV

Hi gang
I've been receiving a number of queries via email on how to return multiple items from a LOV using UIX thanks to earlier posts of mine on OTN. I'm unfortunately aware my previous posts on this are not that clear thanks to the nature of the forums Q&A type approach. So I thought I'd write one clear post, and then direct any queries to it from now on to save me time.
Following is my solution to this problem. Please note it's just one method of many in skinning a cat. It's my understanding via chatting to Oracle employees that LOVs are to be changed in a future release of JDeveloper to be more like Oracle Forms LOVs, so my skinning skills may be rather bloody & crude very soon (already?).
I'll base my example on the hr schema supplied with the standard RDBMS install.
Say we have an UIX input-form screen to modify an employees record. The employees record has a department_id field and a fk to the departments table. Our requirement is to build a LOV for the department_id field such that we can link the employees record to any department_id in the database. In turn we want the department_name shown on the employees input form, so this must be returned via the LOV too.
To meet this requirement follow these steps:
1) In your ADF BC model project, create 2 EOs for employees and departments.
2) Also in your model, create 2 VOs for the same EOs.
3) Open your employees VO and create a new attribute DepartmentName. Check selected in query. In expressions type (SELECT dept.department_name FROM departments dept WHERE dept.department_id = employees.department_id). Check Updateable always.
4) Create a new empty UIX page in your ViewController project called editEmployees.uix.
5) From the data control palette, drag and drop EmployeesView1 as an input-form. Notice that the new field DepartmentName is also included in the input-form.
6) As the DepartmentName will be populated either from querying existing employees records, or via the LOV, disable the field as the user should not have the ability to edit it.
7) Select the DepartmentId field and delete it. In the UI Model window delete the DepartmentId binding.
8) From the data controls palette, drag and drop the DepartmentId field as a messageLovInput onto your page. Note in your application navigator a new UIX page lovWindow0.uix (or similar) has been created for you.
9) While the lovWindow0.uix is still in italics (before you save it), rename the file to departmentsLov.uix.
10) Back in your editEmployees.uix page, your messageLovInput source will look like the following:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="${bindings.DepartmentId.path}"
    destination="lovWindow0.uix"/>Change it to be:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="DepartmentId"
    destination="departmentsLov.uix"
    partialRenderMode="multiple"
    partialTargets="_uixState DepartmentName"/>11) Also change your DepartmentName source to look like the following:
<messageTextInput
    id=DepartmentName
    model="${bindings.DepartmentName}"
    columns="10"
    disabled="true"/>12) Open your departmentsLov.uix page.
13) In the data control palette, drag and drop the DepartmentId field of the DepartmentView1 as a LovTable into the Results area on your page.
14) Notice in the UI Model window that the 3 binding controls have been created for you, an iterator, a range and a binding for DepartmentId.
15) Right click on the DepartmentsLovUIModel node in the UI Model window, then create binding, display, and finally attribute. The attribute binding editor will pop up. In the select-an-iterator drop down select the DepartmentsView1Iterator. Now select DepartmentName in the attribute list and then the ok button.
16) Note in the UI Model you now have a new binding called DCDefaultControl. Select this, and in the property palette change the Id to DepartmentName.
17) View the LOV pages source, and change the lovUpdate event as follows:
<event name="lovSelect">
    <compound>
        <set value="${bindings.DepartmentId.inputValue}" target="${sessionScope}" property="MyAppDepartmentId" />
        <set value="${bindings.DepartmentName.inputValue}" target="${sessionScope}" property="MyAppDepartmentName" />
    </compound>
</event>18) Return to editEmployees.uix source, and modify the lovUpdate event to look as follows:
<event name="lovUpdate">
    <compound>
        <set value="${sessionScope.MyAppDepartmentId}" target="${bindings.DepartmentId}" property="inputValue"/>
        <set value="${sessionScope.MyAppDepartmentName}" target="${bindings.DepartmentName}" property="inputValue"/>
    </compound>
</event>Thats it. Now when you select a value in your LOV, it will return 2 (multiple!) values.
A couple things to note:
1) In the messageLovInput id field we dont use the .path notation. This is mechanism for returning 1 value from the LOV and is useless for us.
2) Again in the messageLovInput we supply _uixState as an entry in the partialTargets.
3) We are relying on partial-page-refresh functionality to update multiple items on the screen.
Im not going to take the time out to explain these 3 points, but its worthwhile you learning more about them, especially the last 2, as a separate exercise.
One other useful thing to do is, in your messageLovInput, include as a last entry in the partialTargets list MessageBox. In turn locate the messageBox control on your page (if any), and supply an id=MessageBox. This will allow the LOV to place any errors raised in the MessageBox and show them to the user.
I hope this works for you :)
Cheers,
CM.

Thanks Chris,
It took me some time to find the information I needed, how to use return multiple values from a LOV popup window, then I found your post and all problems were solved. Its working perfectly, well, almost perfectly.
Im always fighting with ADF-UIX, it never does the thing that I expect it to do, I guess its because I have a hard time letting go of the total control you have as a developer and let the framework take care of a few things.
Anyway, I'm using your example to fill 5 fields at once, one of the fields being a messageChoice (a list with countries) with a LOV to a lookup table (id , country).
I return the countryId from the popup LOV window, that works great, but it doesn't set the correct value in my messageChoice . I think its because its using the CountryId for the listbox index.
So how can I select the correct value inside my messageChoice? Come to think of it, I dont realy think its LOV related...
Can someone help me out out here?
Kind regards
Ido

How java gets objet collections from DB function

This is database function. my question is how java get those values from the function.
Could you please post some sample code also?
CREATE OR REPLACE
Type T_PREO_RoleINFO is Object
ROLE_ID NUMBER(10),
ROLE_NAME VARCHAR2(20))
CREATE OR REPLACE
TYPE T_RoleInfo IS TABLE OF PREORDER.
T_PREO_RoleINFO
Function F_GetUserRole(Userid in number)
return T_RoleInfo as
V_Role T_RoleInfo;
begin
     select T_PREO_RoleINFO(PREO_Role.ROLE_ID,PREO_Role.ROLE_NAME)
     BULK COLLECT INTO V_Role
     from preorder.PREO_Role, preorder.PREO_User_Role
     where PREO_Role.Role_id = PREO_User_Role.Role_id
     and PREO_User_Role.user_id = userid;
     return V_Role;
end;

check this out
http://www.experts-exchange.com/Programming/Programming_Languages/Java/Q_20878677.html

How do I execute a returned sql string from a function on the command line?

Hi,
I have written a pl/sql function that will dynamically create a sql select statement. I need to be able to execute this statement from the command line. e.g from sqlplus
Say my function is called "sql_create" and it returns "select * from customer"
How do I execute the returned value from the command line?" Is it possible?
SQL> select sql_create from dual;
SQL_CREATE
select * from customer
SQL>
So I try:
SQL> exec execute immediate 'select sql_create from dual';
SQL>
I don't get an error but I don't get the result set either.
Is there a command I can use instead of execute immediate?
thanks,
Susan
Edited by: Susan123456 on Jul 2, 2009 1:21 AM

depends on the frontend. Most frontends (like Java and .Net) know how to handle REF CURSORS. Instead of returing a "string" which represents a query, return a ref cursor
SQL> ed
Wrote file afiedt.buf
1 create function sql_q return sys_refcursor
2 is
3     rc sys_refcursor;
4 begin
5     open rc for select * from emp;
6     return rc;
7* end;
SQL> /
Function created.
SQL> var r refcursor
SQL>
SQL> exec :r := sql_q
PL/SQL procedure successfully completed.
SQL> print r
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7369 SMITH      CLERK           7902 17-DEC-80        900                    20
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1700        300         30
      7521 WARD       SALESMAN        7698 22-FEB-81       1350        500         30
      7566 JONES      MANAGER         7839 02-APR-81       3075                    20
      7654 MARTIN     SALESMAN        7698 28-SEP-81       1350       1400         30
      7698 BLAKE      MANAGER         7839 01-MAY-81       2950                    30
      7782 CLARK      MANAGER         7934 09-JUN-81       2551                    10
      7788 SCOTT      ANALYST         7566 19-APR-87       3100                    20
      7839 KING       PRESIDENT            17-NOV-81       5100                    10
      7844 TURNER     SALESMAN        7698 08-SEP-81       1600          0         30
      7876 ADAMS      CLERK           7788 23-MAY-87       1200                    20
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7900 JAMES      CLERK           7698 03-DEC-81       1050                    30
      7902 FORD       ANALYST         7566 03-DEC-81       3100                    20
      7934 MILLER     CLERK           7782 23-JAN-82       1400                    10

How to return Varchar2(1) from function ?? Simple but annoying :(

Hi,
I have a function something like...
CREATE OR REPLACE FUNCTION Test ( id number) RETURN VARCHAR2 ...
Now I am using this function in a View as ...
select
test(123) as Test
In the View description, this column appears as Varchar 4000. whereas I want it as varchar2(1).
When i redefine the function return value
CREATE OR REPLACE FUNCTION Test (id1 number) RETURN VARCHAR2(1) ...
It gives error...
Please suggest.
Thanks in Advance.

SQL> CREATE OR REPLACE FUNCTION Test ( id number) RETURN VARCHAR2
2 as
3 begin
4    return 'A';
5 end;
6 /
Functie is aangemaakt.
SQL> create view v_test as select test(123) as test from dual
2 /
View is aangemaakt.
SQL> desc v_test
Naam                                                                      Null?    Type
TEST                                                                               VARCHAR2(4000)
SQL> create or replace view v_test as select cast(test(123) as varchar2(1)) as test from dual
2 /
View is aangemaakt.
SQL> desc v_test
Naam                                                                      Null?    Type
TEST                                                                               VARCHAR2(1)Regards,
Rob.

How to return custJava Object from Java Stored Function/Procedure to Java Application

I WILL PAY $100 FOR SOLUTION.
Oracle JDBC documentation gives step by step on how to return Oracle Type Object to Java Application. No question here.
But is it possible to create Java Stored Function [getMyClass() ] which returns CUSTOM Java based object [MyClass] to Java application like:
//java stored function
class Foo
public static MyClass getMyClass()
return new MyClass();
//java class I want to return to Java
class MyClass
public String getGreetings(String name)
return "Hello " + name;
I tried to do it using intermittent Oracle
Type Object and OracleConnection map to make binding between Java->Oracle->Java. I could
not get throgh meaningless run time ORA Errors. Any kind of help would be greatly
appreciated. If you know the answer please
post it or e-mail [email protected]
null

You don't say which version of the database you are on. There's an interesting looking article on OTN on handling CLOBs in JDBC in 10g. It may well be useful for earlier versions too (but no guarantees).
Cheers, APC

How to return whole number using round function

hi
can i get sql query using round function how to return whole number value

Hi welcome to the forum. if you want whole number value what does it mean
1. whether you want the whole number greator than or eqaul to that number example for 12.6 you want 12 or 13
see below example
1. SQL> select round(12.5) from dual;
ROUND(12.5)
         13
2. SQL> select round(12.4) from dual;
ROUND(12.4)
         12
3. SQL> select floor(12.5) from dual;
FLOOR(12.5)
         12
4. SQL> select floor(12.4) from dual;
FLOOR(12.4)
         12
floor will always give you a round value which is a integer or whole number less than or equal to but output of rond will differ if the value is greator than 12.5 it will give 13 but if it is less than 12.5 it will give 12, so depending on your requirement you can choose which function to use. similarly if you always want to get the whole number greator than the number you can use ceil as below
SQL> select ceil(12.3) from dual;
CEIL(12.3)
        13
SQL> select ceil(12.8) from dual;
CEIL(12.8)
        13

How to get the value from a function using a select statement

I have a function(user defined not built in) that returns multiple values(like an array). My question is how do i get those values in a select statement. when i tried to retrieve it,
select pack.my_members from dual;
i am getting an error
ORA-00902: invalid datatype
I am sure this must be a syntax error with the select statement
The following is the function that give the array of data
package pack
package spec
Type my_table is table of varchar2(25);
function the_members
return pack.my_table;
pakcage body
function the_members return pack.my_table
Remarks: This function returns a table containing names of the
members
is
tm pack.my_table:= pack.my_table('first member','second member','third member','fourth member');
begin
return tm;
end the_members;

Check this example on Pipelinedfunction

Return multiple values from a function to a SELECT statement

I hope I've provided enough information here. If not, just let me know what I'm missing.
I am creating a view that will combine information from a few tables. Most of it is fairly straightforward, but there are a couple of columns in the view that I need to get by running a function within a package. Even this is fairly straightforward (I have a function named action_date in a package called rp, for instance, which I can use to return the date I need via SELECT rp.action_date(sequence_number).
Here's the issue: I actually need to return several bits of information from the same record (not just action_date, but also action_office, action_value, etc.) - a join of the tables won't work here as I'll explain below. I can, of course, run a separate function for each statement but that is obviously inefficient. Within the confines of the view select statement however, I'm not sure how to return each of the values I need.
For instance, right now, I have:
Table1:
sequence_number NUMBER(10),
name VARCHAR(30),
Table2:
Table1_seq NUMBER(10),
action_seq NUMBER(10),
action_date DATE,
action_office VARCHAR(3),
action_value VARCHAR(60),
I can't simply join Table1 and Table2 because I have to do some processing in order to determine which of the matching returned rows I actually need to select. So the package opens a cursor and processes each row until it finds the one that I need.
The following works but is inefficient since all of the calls to the package will return columns from the same record. I just don't know how to return all the values I need into the SELECT statement.
CREATE VIEW all_this_stuff AS
SELECT sequence_number, name,
rp.action_date(sequence_number) action_date,
rp.action_office(sequence_number) action_office,
rp.action_value(sequence_number) action_value
FROM table1
Is there a way to return multiple values into my SELECT statement or am I going about this all wrong?
Any suggestions?
Thanks so much!

Hi,
What you want is a Top-N Query , which you can do using the analytic ROW_NUMBER function in a sub-query, like this:
WITH     got_rnum     AS
     SELECT     action_seq, action_dt, action_office, action_type, action_value
     ,     ROW_NUMBER () OVER ( ORDER BY action_date
                               ,            action_seq
                         ,            action_serial
                       ) AS rnum
     FROM     table2
     WHERE     action_code     = 'AB'
     AND     action_office     LIKE 'E'     -- Is this right?
SELECT     action_seq, action_dt, action_office, action_type, action_value
FROM     got_rnum
WHERE     rnum     = 1
;As written, this will return (at most) one row.
I suspect you'll really want to get one row for each group , where a group is defined by some value in a table to which you're joining.
In that case, add a PARTITION BY clause to the ROW_NUMBER function.
If you'd post a little sample data (CREATE TABLE and INSERT statements), I could show you exactly how.
Since I don't have your tables, I'll show you using tables in the scott schema.
Here's a view that has data from the scott.dept table and also from scott.emp, but only for the most senior employee in each department (that is, the employee with the earliest hiredate). If there happens to be a tie for the earliest hiredate, then the contender with the lowest empno is chosen.
CREATE OR REPLACE VIEW     senior_emp
AS
WITH     got_rnum     AS
     SELECT     d.deptno
     ,     d.dname
     ,     e.empno
     ,     e.ename
     ,     e.hiredate
     ,     ROW_NUMBER () OVER ( PARTITION BY d.deptno
                               ORDER BY         e.hiredate
                         ,                e.empno
                       ) AS rnum
     FROM     scott.dept     d
     JOIN     scott.emp     e     ON     d.deptno     = e.deptno
SELECT     deptno
,     dname
,     empno
,     ename
,     hiredate
FROM     got_rnum
WHERE     rnum     = 1
SELECT     *
FROM     senior_emp
;Output:
.    DEPTNO DNAME               EMPNO ENAME      HIREDATE
        10 ACCOUNTING           7782 CLARK      09-JUN-81
        20 RESEARCH             7369 SMITH      17-DEC-80
        30 SALES                7499 ALLEN      20-FEB-81
By the way, one of the conditions in the query you posted was
action_office     LIKE 'E'which is equivalent to
action_office     = 'E'(LIKE is always equivalent to = if the string after LIKE doesn't contain any wildcards.)
Did you mean to say that, or did you mean something like this:
action_office     LIKE 'E%'instead?

How to return a value from sql plus activity

Hi,
I want to return a value from sqlplus activity to a processflow variable.
SQL PLUS activity has a property :"RESULT_CODE", whenever i run the process flow this value is always reurned as 0.
in sqlplus activity i have written some pl/sql block....
for example
begin
end;
exit
i want to do something like
begin
if v=100 then
return 1
else
return 0;
end if;
end;
exit
can some please tell me how can i return value from this pl/sql block to proessflow.
Regards,
RD_RBS

table ==> function
input param from table to function. ==> input mapping paramter to store the output from the mapping.
Will this now work.

Return type Boolean From Oracle Function

1. How do I get a return type of Boolean from Oracle function in Java?
2. I have a function fx overloaded in Oracle (8 variances) and I have trouble getting the right one in Java. Is 8 too high a figure or Java does not support calling overloaded functions or what?
Thanks for any help.

I am facing a similar situation, where I have defined an overloaded function in one package (2 variants) which both return a type BOOLAN value.
I am having trouble to setting up an CallableStatemnt to call one of this functions from Java. Whenever I set the parameter with a BIT or NUMBER data type, I get an exception with java.lang.boolean during my
callablestatement.setobject( indez, parameter, OracleTypes.BIT );
or
callablestatement.setobject( indez, parameter, OracleTypes.NUMBER );
I have no problem calling the function from SQLPlus, but doing so from Java raises the exception. I have found no exact match in OracleTypes or java.sql.Types for a BOOLEAN data type.
In your response do you mean to modify the Function to return a NUMBER instead of a BOOLEAN, or do you mean to set the parameter as Types.NUMBER in the calling java code?
Thanks,
Fedro

How to access the screen from one function group to other function group

Hi Experts,
How to access the the screen from one function group to other function group.
Please help me on this , Bcoz it is client requirement i need to finish this urgently.
Please
Thanks
Basu

HI ,
You can do a call transaction or submit and return
Regards,
Sooness.

How to get some values from a function

i want to test1 function to return the value of ax and az and update xx and xz to reuse it but itseems xx and xz neverchanging..i am a newbie but have some knowledge confuse how to return values in function
import flash.events.Event;
var xx=1
var xz=10
addEventListener(Event.ENTER_FRAME,aa)
function aa(e:Event ){
test1(xx,xz)}
function test1(ax:Number,az:Number ){
ax=ax+10;
az=az+10;
trace(ax)
trace(az)

Basic data types are always pass by value. This means to do it with primitive data types you have to do something like this:
function test1(ax:Number,az:Number ):Object {
ax=ax+10;
az=az+10;
trace(ax)
trace(az)
return {xx: az, xz: az};
and then after you call your function like this
var returnObject:Object = test1(xx, xz);
and then add these lines:
xx = returnObject.xx;
xz = returnObject.xz;

How to return multiple values from dialog popup

hi all
I'm using ADF 10g. I have a requirement that I have to return multiple values from a dialog.
I have a page containing a table with a button which calls the dialog. The dialog contains a multi-select table where i want to select multiple records and add them to the table in the calling page.
In the backing bean of the calling page, I have the returnListener method.
I am thinking that I have to store the selected rows from dialog in an array and return that array to the returnListener...but I don't know how to go about it with the code.
Can someone help me out with it?
thanks

Hi Frank,
I'm trying to implement your suggestion but getting comfused.
AdfFacesContext.getCurrentInstance().returnFromDialog(null, hashMap) is called in ActionListener method, from what I understood.
ReturnListener method already calls it, so no need to call explicitly.
Okay here's what i'm doing.
command button launches the dialog on the calling page.
In the dialog page, there is a button "select", which when i click, closes the dialog and returns to calling page. I put a af:returnActionListener on this button, which logically should have a corresponding ReturnListener() in the calling page backing bean.
Now I have 3 questions:
1. do i have to use ActionListener or ReturnListener?
2. where do I create the hashMap? Is it in the backing bean of the dialog or in the one of calling page?
3. how do I retrieve the keys n values from hashmap?
please help! thanks
This is found in the backing bean of calling page:
package mu.gcc.dms.view.bean.backing;
import com.sun.java.util.collections.ArrayList;
import com.sun.java.util.collections.HashMap;
import com.sun.java.util.collections.List;
import java.io.IOException;
import java.util.Map;
import javax.faces.application.Application;
import javax.faces.application.ViewHandler;
import javax.faces.component.UIViewRoot;
import javax.faces.context.FacesContext;
import javax.faces.el.ValueBinding;
import javax.faces.event.ActionEvent;
import mu.gcc.dms.model.services.DMSServiceImpl;
import mu.gcc.dms.model.views.SiteCompaniesImpl;
import mu.gcc.dms.model.views.SiteCompaniesRowImpl;
import mu.gcc.dms.model.views.lookup.LkpGlobalCompaniesImpl;
import mu.gcc.util.ADFUtils;
import mu.gcc.util.JSFUtils;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCBindingContainer;
import oracle.adf.model.binding.DCIteratorBinding;
import oracle.adf.view.faces.context.AdfFacesContext;
import oracle.adf.view.faces.event.ReturnEvent;
import oracle.adf.view.faces.model.RowKeySet;
import oracle.binding.AttributeBinding;
import oracle.binding.BindingContainer;
import oracle.binding.OperationBinding;
import oracle.jbo.AttributeDef;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowIterator;
import oracle.jbo.RowSetIterator;
import oracle.jbo.domain.Number;
import oracle.jbo.server.java.util.Iterator;
public class CompanyList {
private BindingContainer bindings;
private Map hashMap;
DMSServiceImpl service =(DMSServiceImpl)ADFUtils.getDataControlApplicationModule("DMSServiceDataControl");
SiteCompaniesImpl siteCompanyList = service.getSiteCompanies();
LkpGlobalCompaniesImpl globalCompanyList = service.getLkpGlobalCompanies();
public CompanyList() {
public BindingContainer getBindings() {
return this.bindings;
public void setBindings(BindingContainer bindings) {
this.bindings = bindings;
*public void setHashMap(Map hashMap) {*
*// hashMap = (Map)new HashMap();*
this.hashMap = hashMap;
*public Map getHashMap() {*
return hashMap;
public String searchCompanyButton_action() {
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("Execute");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
return null;
*public void addCompanyActionListener(ActionEvent actionEvent){*
AdfFacesContext.getCurrentInstance().returnFromDialog(null, hashMap);
public void addCompanyReturnListener(ReturnEvent returnEvent){
//how to get hashmap from here??
public String addCompanyButton_action() {
return "dialog:globalLovCompanies";
}

How to return a integer from Userdefined function????

Similar Messages

Maybe you are looking for