How to return just the TIME in a date time stamp column?

Hello.
My 'DATETIMESTAMP' column ordinarily returns '15/11/2011 10:32:15'.
If I TRUNC(DATETIMESTAMP) I can get just the date - which is great.
But what I want here is just the TIME element.
SUBSTR doesn't seem to return anything after the date element.
I've searched high-and-low!
Any thoughts people?
Cheers.
Ady.

I don't believe it - I could have sworn I'd tried that!
Cheers pal.
That's fixed it for me.

Similar Messages

How do I fix the time stamp?

How do I adjust the time stamp on messages in my inbox? When my mail comes to my iphone, the time is what I would assume is correct, but on my mac it shows a time stamp is for 5 hours later. I looked in mail preferences, but couldn't find anything.

Did you recently change time zones? Check the time zone on your system (make sure it's correct) and then restart Mail.app.
I just found that Mail has a bug where it doesn't update the received dates in the inbox when I change the time zone. Even new mails that arrive arrive in the previous time zone, which had the funny effect that I was seeing mails that had arrived 1 hour in the future.
It can be remedied by restarting Mail.app.

How do I get the time stamp on photo?

How do I get the time stamp on photo? Someone texted me a few pics and it does not show date taken in iphoto. How can I find this. They were taken with a iphone. Thx

Here's a screenshot of what Keith is referring to:
Note the cursor over the date which brings up the 3 important dates for the photo.
OT

How do I see the time stamp from footage

I was wondering if it is possible to see time stamps from footage taken by GoPro camera in FCPX. I can see the duration of the clips and the DATE it was created. I would like to see the actual time it was created. I have 2 cameras that were shooting at the same time and I would like an easier way of sifting through all of the clips to mary them up.
Is there a way to see the time stamp of when the video was taken?
Thanks

Got ya. I will suggest one more thing: You can add "markers" at points where you can visually (or aurally) see (or hear) a synch point. Once you add these markers, "synchronize clip" will begin to grind out the rest.
Again, if you look at the above tutorial, I think it explains this under "manual" synch.
I don't mean to push this upon you, but... FCPX is GREAT for multi-cam synch. It is the best--I think--in the industry.
Good luck. Sorry if I'm of little help beyond this.

How can I change the time stamp of a waveform?

Hello,
I am using a "waveform" data type and I want to change its time tamp.
There is a vi "set waveform attribute.vi". I connected a string NI_ExpTimeStamp and a integer to the set waveform attribute.vi.
Nothing happens. It does not seem to replace anything since the boolean output remains "false", but I do not get an error.
Simon

I would use the Build Waveform primitave. Feed the waveform in and set the t0 component.
I am not comfortable with the timestamp attributes. Both NI_ExpStartTimeStamp and NI_ExpTimeStamp describe the "time stamp of the first sample". So, what happens if they are set to different values? I have used set and get on other attributes with great sucess, but the timestamp attributes seem to be attempting to duplicate values that already exist elsewhere in the waveform.
Message Edited by jasonhill on 03-01-2006 08:24 AM
Attachments:
waveformtimestamp.PNG ‏3 KB

HT3529 how do i get the time stamp on my text messages?

I used to have a time stamp on my text messages and now since i have upgraded to the IOS7 it is no longer there. can anyone tell me how to get it back please and thank you.

swipe on any message to the left and the timestamp will appear.

How do you determine the time stamp or pointer in an Event?

Perhaps I want to tell someone to check the specific point in an event, like 22:08 into the event or from marker 1234 to 5678. What markers does iMovie use?
Maybe I have 20 favorite clips in an Event and I want to reference a specific one.
When playing back a YouTube video I can say, Go to the 2:38 mark. With an event, what time stamp can I reference?

Event clips have a time code based on the time of day you shot the clip. Clips are listed in the event in chronological order. So you you want to point somebody to the action that tool place on March 23 at 10:03:45, you can.
Click VIEW/Playhead Info. Now as you skim your mouse over the event clips, you will see the date and time info.
This works on clips shot by a digital camera. If you have clips shot by older analog cameras like VHS or 8MM, you need to take some additional steps. Let me know if you need this.

How do I change the time stamp on my FI_GL_6 delta?

As of today, I am only capable of loading this once a day.   I need to be able to load this more frequently, (4 or 5 times daily) . I know there is a field in table ROOSOURCE - DELTASAFE2, which I believe needs to be changed. But I do not know how to modify this table.
Any help would be greatly appreciated!!
Kindest Regards,
Steve

Hi guys,
It appears to be working.   After following that note, and flagging that field in the QAS system, when I do a delta, it pulls in, let's say, 40 records. If new records are then added, let's say 15 new records,it will pull in 55. So it accumulates them throughout the day. So the ODS key figures need to be an over-write status.   Based on what this table is telling me, at 2am, of the next day, it will start over.   This is definitely a lot better then only receiving this data once a day.
I'd love to give all of you the full amount of points, but i'm rather new to this and not quite sure how it works.
I don't want to close this question prior to awarding them.    Do I simply flag full points on the left hand side, then close the question?
Steve

How do I reset the time in my email.the computer has the right time but the time stamp is three hours earlier. If I go to my ISP website, the time is correct

I was locked out of my ISP mail for a few hours. When it was restored, the time stamp on the email through their website was correct, but the time stamp in Apple mail is 3hr earlier. The clock on ther computer is fine just the time stamp in apple mailis off.
Thanks

I'm the OP and just read https://discussions.apple.com/thread/5817181 which attempts to outline the error in mavericks with regards to ntpd and pacemaker. I think just replacing the -302.642 with 0.00002 will keep me closer to the mark and I'll anxiously await the real fix as well--in 10.9.2 [hope x3] unless of course someone really knows how to fix this.

How to display the time stamp in a data log table

Hello,
I want to display data during the data acquisition process. How do I add the time stamp as one of the column in the 'Result Table' located at bottom left of the example code?
Thanks,
Ryan
Solved!
Go to Solution.
Attachments:
Cycle Analysis.vi ‏229 KB

I inserted the portion you added to my program and it worked but not exactly the way I want. It added the time and date when I start the data acquision. But I want the time stamp to be shown on every single row. Please see attached image.Thanks.
Attachments:
Result.JPG ‏54 KB

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

I have just installed a 2TB time capsule on my iMac i7, it see my second 1TB hard drive but the 256 SSD doesn't come up in the list of hard drives I can back up. How can I enable the time machine to see my first SSD 256gb hard drive?

iLife is preinstalled on all the Macs. If you purchased iLife in the App Store or your computer came without DVDs, open App Store > Purchases and download the applications. If your Mac came with discs, insert the Applications DVD and install iLife applications

My backup to Time Capsule is taking over 4 million days. How can I shorten the time? I am not able to connect through ethernet. How do I fix this?

My backup to Time Capsule is taking over 4 million days. How can I shorten the time? I am not able to connect through ethernet. How do I fix this?
Not only that but my Mac Pro keep running and does not stop, my Address book has a blue light under it but wont open, the light for my monitor in the bottom right corner wont turn on or off. Please need help...

It sounds like there is an issue with the Mac itself.
Use the verify disk A5 in troubleshooting.
http://pondini.org/TM/Troubleshooting.html
Even if you cannot connect by ethernet, at current location.. you can simply disconnect the TC from the network and bring it to the Mac and plug it in by ethernet. The TC can be reset if you haven't got a suitable current setup (save previous setup before you change it) and run just as backup device.. do the backup and then return it to the network.
If this is just a standard incremental backup.. then something has broken. The issue is not the TC pe se but failure in hardware somewhere.

I have a power pc (g5) computer that I will soon be replacing with a current i5 or i7 mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

I have a Power PC G5 computer that I will soon be replacing with a current i5 or i7 Mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

Hi, likely the easiest is to just poll the drive & get something like this...
Get MacScan...
http://www.apple.com/downloads/macosx/networking_security/macscan.html
http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
But if you have a good external drive already, just clone it.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/

How can I select the time values of a signal and connect them to the y-input of a divide command?

Hi,
I have an analog signal connected with a threshold peak detector. The counted peaks shall be divided by the total time of the recorded signal. My problem is, I don't know how to connect just the the x-values, i.e. the time component of the signal, to the divide command. I have no idea how to "split" the signal so that I don't have the whole signal but just the time in seconds as an output of the measured or filtered signal sub-VI, respectively.
Does anyone have a hint?
Thanks for your help,
Philipp

Hi Phillipp,
do you mean you have a waveform and you want to get the components? In this case "Get Waveform Components" should work.
Mike

In IPhoto I have edited the order of my images. When I play the album on Apple TV the order reverts back to the time stamp. Any suggestions on how to get the images to play on my TV in the order I want?

Apple TV won't play back my album images from IPhoto in the edited order I want. The order seems to revert back to the time stamp for the photos. I have combined the photos from 3 different cameras and they had slightly different clock settings. I am working on an edited presentation of about 1500 Pics from travels in Turkey this summer and sometimes the order makes more sense if I move some of the images quite a ways. Is there any solution short of changing the time stamp on every single image?

Using the 'adjust date and time' setting is the best way to syncronise the photos from all your cameras. However as you say this merely puts them all in the correct order chronologically.
If there are photos that you feel would be best somewhere else in an album other than in date order, it may depend on how many as to which is the best option for you. If it's only a few you may wish to adjust the date/time on these few manually so they fit in with the rest where you want them.
If you have a lot of photos you want in a different order to the order by date, or you really don't care about what date/time is used and just want them in the order you want them in, then 'batch change' is the best option.
From the view menu, select 'sort photos - manually', drag the photos around until they are in the order you want, select all of them. Now select the batch change option and choose 'Date' from the 'set' options, type in a date and time for the first photo, it can be anything but it's probably a good idea to choose something close to the original date, then check the box 'Add'. You can keep the value set at 1 minute or enter any value you want, it may be more realistic to divide the length of your holiday by the number of photos you have to calculate a value, but it really isn't necessary. Clicking OK will adjust all the dates without affecting the title or description and the photos will now show on the Apple TV in that order.
Just to be sure iTunes is updated, you may want to go to the advanced menu/choose photos to share in iTunes and deselect the album, apply, reselect the album and apply again.

How to return just the TIME in a date time stamp column?

Similar Messages

Maybe you are looking for