How to return material from Project which is already charged?

Hi,
In our implementation we are using project manufacturing and hence we are using locator to charge task for inventory transaction.Suppose there are two tasks
in my project , task1 and task 2. At the time of creating the PO we are using task1 and the material is received in an asset type of subinventory. Now the same material will be used at another task which is subcontracted by another supplier. At this point we issue the item from locator(project-Task 1) to an expense type of subinventory which is having the locator as (project-Task2).But in some cases total material issued is not used and it may be returned from task2.As this item has been returned from an expense sub inventory system is not allowing to give rate. Is there any way out to reduce the cost of task 2?

hi,
we are using Project Transfer Transaction to issue the material to task 2. Basically we are transferring from an asset subinventory to an expense subinventory. In asset subinventory the locator is task 1 and in expense subinventory the locator is task2.So the task cost is shifting from task1 to task2.Now what happens sometime is, there is return from the expense subinventory hence the cost of task2 gets reduced.but system does not give any option to give rate when transferring from the expense subinventory to asset subinventory because when any item is taken to expense subinventory it does not have any cost,only quantity remains.So the cost of task2 does not get reduced.

Similar Messages

Required reference document to issue the material from project stock

Hi All,
we have procure the project stock material with Acct. assignment Grp as "Q", now the material is laying in project stock.
the things is we can issue the warehouse material with reference to Project Reservation similarly my client wanted to use some SAP document for records purpose to issue the material from project stock.
i have checked this functionality in SAP which is not available except straight way issuing the material from project stock using MB1A( 221 Q).
please help me out to resolve this requirent.
manoj singh
we can

Hi,
Did you implement PS module in your system? How were your project stocks reserved?
Cheers,
HT

Returnable Material from Vendor

Hi,
We are planning to implement Returnable Material from Vendor.
The process we would like to follow is that we issue certain pallets to the vendor who would provide the RM's on the pallet. The pallets would be valuated on the Company code. We would like to track the number of pallets being issued to the vendor and also the number of pallets currently at the vendor at any point of time.
The following are my doubts:
1. How do we configure this process in SAP?
2. What are the Master Data changes that need to be done? (Vendor Master, Customer Master and Material Master)
3. How do we issue the Pallets to the vendor?
4. How do we GR the Pallets?
5. Should we treat the pallets as a special Material?
6. How to track the Pallets?
7. Can we implement WM for tracking pallets?(like can we use Storage Unit Management to track pallets)
8. If my RM stores is WM managed how do i capture the above information?
Please suggest.
Regards,
Srikanth

Hi,
Create Pallets material as a material Type LEIH...
Now create PO for your RM's...
Do GRN for above PO ...In the GRN RM material will come in the GRN...Now you click on transport equipment button (last button) , just below the item grid table...
It will take 501 + M mvt...
Here you enter your pallet material and do the GRN.....check in MMBE, tracking will be done here...it wil show you the stock in sepearte line item...
Now return the pallet to the vendor by 502 + M mvt ....
Utsav
Edited by: Utsav.agra on Sep 29, 2009 9:14 AM

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

Return material from cost center

Dear All,
Return material from cost center:- xx, Material:- yyy qty z Pc in inventory. create sales order for delivery.
They are materiel in prototype in R&D for customer loan
What is the Process that has to be follows in SAP for this can some explain.
sapuser

hi
is it possible do more description
regards
R.T

Procedure for return material from cost center

Is there any other Movement Type to return material from Cost Center except Cancellation of Goods Issue ?

Hi
I think no option other than cancellation.
You can try the the below scenario.
Try to receive the material into GR blocked stock using 103 if you want to use the material release it by 105
If you want to return then use movement type 124.
Hope it helps
Thanks/karthik

How can I export my project which is a fla. format to a avi. format? I am using FlashPro CC.

How can I export my project which is fla. format to avi. format? I created my project using the "timeline" in FlashPro CC. I would like to have it as a avi. file. Thank you in advance.

File > Export > Export Movie...
That should do the trick! Then convert using Adobe Media Encoder, if desired.

Return Delivery from Project

Hi All,
How to generate return delivery from CNS0?
The scenario goes like this.
1. Materials are attached to the network activities( both plant stock and Project stock materials exist)
2. Delivery request is created from CNS0
3. Goods are picked and PGI is done.
Now, there is a goods return process which has to happen because of some reasons.
Can i trigger this from CNS0 if YES then how?
Waiting for your expert advice
Regards
Prasad

Hi,
you cannot perform the returns processing with CNS0. You have to use the "standard" sales returns processing.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm
Kind regards
Jan

Vendor Consignment - Returned material from customer directly to consignmen

Hi,
I'm working with a consignment vendor process. I'd like to know how should I manage the return from my costumer. I'd like to move this returned material directly to my vendor consignment.
Is it possible? How can I do it? How affects it to the consignment settlement?
Points will be given
Thanks in advance

Hi Roger,
We have 2 type of consignment process in SAP.
1. Vendor consignment (MM process) & 2. Consignment with customer.(SD process)
If the Customer is returning the item (or consignment item). ... it will be process as normal process...like goods receipt in to inspection ... if it is ok... then again we can move to Consignment ( with customer)...in seperate transaction.
Hope this is clear.
REgards
Anand

How to return fault from Async BPEL

Hi,
I have ESB that has input,output and fault, This ESB calls Async BPEL that takes only input. Now i want to return fault from BPEL to ESB. How do i do it?
Please help.

Hi,
My use case is i am implementing AIA. So my enterprise layer is ESB and my ABCS provider is BPEL. As provider takes lot of time to complete the instance, to avoid timeout issue i just created Async BPEL with two ports one for input another for fault. I am able to send back my fault back to this call back port. But how i can receive the fault to the same ESB which called the BPEL?
I am not able to implement it. I can not go for any workaround like creating one more BPEL and then make it as sync, put pick activity and receive the fault then send back to ESB.
Thats the reason i am very specific. If you find some solution please let me know.

How to return fault from Async BPEL to ESB

Hi,
I have ESB that has input,output and fault, This ESB calls Async BPEL that takes only input. Now i want to return fault from BPEL to ESB. How do i do it?
Please help.

Hi,
My use case is i am implementing AIA. So my enterprise layer is ESB and my ABCS provider is BPEL. As provider takes lot of time to complete the instance, to avoid timeout issue i just created Async BPEL with two ports one for input another for fault. I am able to send back my fault back to this call back port. But how i can receive the fault to the same ESB which called the BPEL?
I am not able to implement it. I can not go for any workaround like creating one more BPEL and then make it as sync, put pick activity and receive the fault then send back to ESB.
Thats the reason i am very specific. If you find some solution please let me know.

QM: How to Move material from quality stock to unrestricted stock

Hi,
How to post material stock from quality to unrestricted without using 321.
Regards,

Hi,
if you have quality management active then you have to mainttain quality view in material master along with the inspection lot settings. now this will result in quality lot creation at the time of GRN. then you have to execute QA32 and get the lot. make usage decision and there you will find tab with lot quantity. there you have to give qty in unrestricted and save it.
if you dont have it then just do the transfer postingeither through MIGO or MB1B with movement type 321. give the mat. plant str loc. qty and save it.
regards,
Adwait Bachuwar

How to return rows from tmp table created inside function??

Hi,
I'm trying to return rows from a cursor or table (created within
the function). How do I specify the return type?

Hi,
Here is the code that examples to create a function that can
return data from table.This is achieved using REFCURSOR concept.
Hope this helps you.I'm giving all stuff in single PL/SQL
block.You can break it and create a package and declare
refcursor type and function in that as well.
DECLARE
-- Declare generic cursor type
TYPE gencur_type IS REF CURSOR ;
-- Declare generic cursor varaible
gencur gencur_type;
-- Declare record type
TYPE rec_type IS RECORD(descr emp.ename%type) ;
-- Declare record type variable
rec rec_type;
--This how you declare a local function that returns gencrtype
data set
--This function is called in main block
FUNCTION call_refcur return gencur_type
AS
          rr gencur_type;
BEGIN
     OPEN rr FOR SELECT descr FROM emp;
     RETURN rr;
END;-- end of local function
-- Main block begins here
BEGIN
-- Call the local function so that gencur will have
-- the data set returned by select statement
gencur:= call_refcur;
-- Open a loop to test the stuff
LOOP
     FETCH gencur INTO rec;
     EXIT WHEN gencur%NOTFOUND;
     null;
     dbms_output.put_line(rec.ename);
END LOOP;
END;
Regards,
Sridhar

Oracle forms 9i - How to return back from a block?

Some one please help me
In a trigger, I have a code says go_block. How to return from the block and back to the trigger to continue executing the codes below the go_block statement? Please see example below, I want to come back from block CHECK_STUFF and continue execute the statements
:Name.option := '1';
if :name.option = '1' then
Example:
Block: Name
Item: yes_no - Key-next-item trigger
declare
begin
go_block('check_stuff');
go_item('answer');
:Name.option := '1';
if :name.option = '1' then
Thanks - Patty

The code behind the GO_BLOCK is executed immediately after the GO_BLOCK, it doesn't stop at that point. So you have to split your code, like
declare
begin
go_block('check_stuff');Then, create a procedure like
PROCEDURE PR_RETURN_FROM_BLOCK IS
BEGIN
go_item('answer');
:Name.option := '1';
if :name.option = '1' then
END;Then, when returning from the block (in whatever trigger you use), just call that procedure.

How to return cursor from procedure to jdbc

plz help me through example of code as wl as procedure where.... return cursor from procedure to jdbc

SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS OFF
GO
CREATE procedure anil3 @count INT OUT,@opcode INT OUT,@total_tiff INT OUT
as
declare @query2 varchar(300),@tiff_count int,@query1 varchar(300)
set @query1='declare move_cursor   cursor forward_only static for
select count(opcode),opcode from TABLE1 group by opcode
open move_cursor'
exec(@query1)
fetch next from move_cursor into @count,@opcode
set @opcode="'"+@opcode+"'"
set @total_tiff=0
while (@@fetch_status=0)
begin
     set @query2='declare move_cursor2 cursor static for '+
     ' select count(tiff) from TABLE2 where opcode='+@opcode+
     ' open move_cursor2 '
     exec(@query2)
     fetch next from move_cursor2 into @tiff_count
     while (@@fetch_status=0)
     begin
          set @total_tiff=@total_tiff+@tiff_count
          fetch next from move_cursor2 into @tiff_count
     end
     close move_cursor2
     deallocate move_cursor2
print @total_tiff
print @count
print @opcode
fetch next from move_cursor into @count,@opcode
end
close move_cursor
deallocate move_cursor
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO******************************************************************************
above this is sql server 2000 PL/SQL and i hv to get the value
print @total_tiff
print @count
print @opcode
through JDBC
plz help me out how to return Cursor to JDBC and HOW toPRINT THESE THREE VALUE @total_tiff, @count, @opcode through JDBC
get this values through JDBC

How to return material from Project which is already charged?

Similar Messages

Maybe you are looking for