How to return to Lion?

I bought a mid 2012 13" MBP last year with Lion installed. Later I upgraded to Mountain Lion. I originally successfully used it with a M-Audio Firewire 1814 audio interface. Now, having upgraded to ML, I'm having problems. Since M-Audio have declared the Firewire 1814 obselete (why) and will not update the driver, I find I must go back to Lion or buy a new interface (>$250). Since there was no install disk how can I do this?
I will never buy an M-Audio product again. I'm not sure I'll be buying another OSX "upgrade" either.

Well I did that and Lion 10.7.5 was installed. I needed 10.7.3. There was some improvement, but not in the digital input I was interested in. I'm restoring it back to the last state I had it. I'm am going to have to buy an new audio interface, and sell mine to a lucky Windows user :-(

Similar Messages

How do I install Lion onto a USB thumb drive or SD card

Hi, folks..
I'm not asking about how to create a Lion installation thumb drive or SD card, or copy the recovery partition to a USB drive or SD card. I already have a backup Lion install thumb drive. What I am hoping to do is create a bootable Lion thumb drive or SD card on which I can also have Drive Genius and other utilities -- so I can boot from the thumb drive or SD card and work on my unmouted nternal hard drive.
Is it as simple as installing Lion onto the thumb drive or SD card, or is there more to it than that?
I've tried searching for this, but everything I've found has been about creating an install SD or thumb drive.
Thanks in advance!

Okay, so I ran the Lion Install app and directed it to install onto my USB thumb drive. Everything looked like it was doing what I wanted, and since the screen showed that it would take about 17 minutes I stepped away for about a half-hour. When I came back my screen was off, and when I pressed a key the progress bar said it would take another 11 minutes. Huh? I went away again for another half-hour, and when I returned the progress bar hadn't moved -- still 11 minutes.
Okay, I was working on a USB drive, no big thing. No keypresses did anything, so I hit the power button on my Mcbook Pro, shut the sytem down, then started it back up. It booted to a screen to setup Lion. Hmmm.... I shut the system down (this time from the Apple menu), pulled the USB thumb drive, powered back up, and ended up at the same place.
I rebooted, this time holding the Alt key, and saw that my Macintosh HD had been renamed to something about install. Booting from that partition gave me no option but to complete a Lion installation.
Thankfully I have a Time Machine backup, and the recovery partition worked, so my system is back up (although some of my preferences seem to have changed, even though my backup was current -- another "huh?").
So, what did I do wrong?

How do I download LION and do a clean install on a new disk?

I have a brand new HD which has not yet been formatted. I would like to download Lion and instead of updating my Snow Leopard OS disk I would like to do a clean install on this new drive.
Do I first do a journaled format on the new drive...? And if so how do I download LION from the APP store and pointn the install at the new target drive?

How to Install Lion Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important - Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase and Download Lion from the App Store.
E. If you want to make a bootable USB flash drive:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion. You can also use it to erase your hard drive and do a clean Lion installation.

My mac keeps freezing...How can I uninstall lion?

My mac keeps freezing on me, particularly when Im on safari. The most annoying part is that it happens three or four times in a matter of an hour, and then Im prompted to submit a report that feels like a joke considering that we have yet to see an update for lion solving this issue, and the problem persists. How can I uninstall lion and get macs previous iOS back?

Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

How can I stop Lion from overwriting my apache conf files

I am at the point of abandoning OS X forever and returning to loading NetBSD on macs. I have never been so angry at a piece of Apple software.
On reboot, the server completely wiped out my apache configuration and rebuilt it. Thankfully I had backups.
How I can prevent Lion from interfering with my apache setup? I will NEVER use that crappy admin tool again. Webmin is FAR superior to it if I need a GUI tool. I can live in the shell very happily. I don't want to have to install a new webserver from source if I can avoid it. I just want to stop Lion from destroying my conf files.
How do I wrest control from this monster?

All we did was not modify httpd.conf other than adding an include at the end. If you put your content in other files, it doesn't seem to mess with them.

How to uninstall mountain lion

How to uninstall mountain lion?

Backup your files, erase the hard drive, install an earlier version of OS X.
Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

How do you uninstall lion; too many problems

how do you uninstall lion; too many problems

Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

How to reinstall Mountain Lion after Mavericks OS has been installed without using the time machine?

Hi, I upgraded to Maverics a few weeks ago, and since than my computer has been very slow. It NEVER happened before. Now, I want to go back to Mountain Lion, but I didn't back up my computer with the time machine. I'd appreciate if anyone could tell me how to reinstall Mountain Lion again over Maverics? Thanks a lot for your help!

You will need either a bootable flash drive with Mountain Lion to install, if you have one, or reinstall Snow Leopard if your computer can boot Snow Leopard. Or you can use Internet Recovery to reinstall the original version of OS X that came with the computer. In any event you will have to repartition and reformat the drive.
Install Mavericks, Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How to put mountain lion on a thumb drive?

How to put mountain lion on a thumb drive?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/
    Lion application. After Mountain/Lion downloads DO NOT click on the Install button.
    Go to your Applications folder and make a copy of the Mountain/Lion installer. Move
    the copy into your Downloads folder. Now you can click on the Install button. You
    must do this because the installer deletes itself automatically when it finishes
    installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
a. Open Disk Utility in your Utilities folder.
b. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left
      side list. Click on the Partition tab in the DU main window.
c. Under the Volume Scheme heading set the number of partitions from the drop down menu to one.
      Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the
      partition scheme to GUID then click on the OK button. Click on the Partition button and wait until
      the process has completed.
d. Select the volume you just created (this is the sub-entry under the drive entry) from the left side
      list. Click on the Erase tab in the DU main window.
e. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the
      button for Zero Data and click on OK to return to the Erase window.
f. Click on the Erase button. The format process can take up to an hour depending upon the flash
     drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
a. Double-click on the InstallESD.dmg file to mount it on your Desktop.
b. Open Disk Utility.
c. Select the USB flash drive from the left side list.
d. Click on the Restore tab in the DU main window.
e. Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
f. Drag the mounted disc icon from the Desktop into the Source entry field.
g. Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.
As an alternative to the above (you still have to do your own download of Lion/Mountain Lion) you can try using Lion DiskMaker 2.0 that automates the process of Steps 2 through 4.

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion and found out it was not compatible with my HP printer (HP photosmart C5580) so I called Apple and asked how to get Mountain Lion off and Snow Leopard back on. The Tech told me to

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion. Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine. Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer. I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs. Also the computer keeps freezing up when it is in the sleep mode, etc.
When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it. Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.

Go to the  menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

How to return a profile in Game Center. where you want to enter the old nikneim?

How to return a profile in Game Center. where you want to enter the old nikneim?

It's not actually round. It is slight flattened vertically.
Anyway...
I have an Action that places guides at 50% (50pc) vertically and horizontally to give me the exact center of an image file, or you place them manually with View > New Guide.
After doing that I would place the circular select from that center point using Shift and Alt (Opt) and get it more or less where I wanted it. Then change the selection into a work path.
You can use Free Transform to reshape and position that work path by selecting it in the Paths panel.
Then place your text, and if you still need to fine tune, use Free Transform again, but on the Type layer.
You could also use Free Transform to reshape the BG graphic to make it round.

[UIX] How To: Return multiple values from a LOV

Hi gang
I've been receiving a number of queries via email on how to return multiple items from a LOV using UIX thanks to earlier posts of mine on OTN. I'm unfortunately aware my previous posts on this are not that clear thanks to the nature of the forums Q&A type approach. So I thought I'd write one clear post, and then direct any queries to it from now on to save me time.
Following is my solution to this problem. Please note it's just one method of many in skinning a cat. It's my understanding via chatting to Oracle employees that LOVs are to be changed in a future release of JDeveloper to be more like Oracle Forms LOVs, so my skinning skills may be rather bloody & crude very soon (already?).
I'll base my example on the hr schema supplied with the standard RDBMS install.
Say we have an UIX input-form screen to modify an employees record. The employees record has a department_id field and a fk to the departments table. Our requirement is to build a LOV for the department_id field such that we can link the employees record to any department_id in the database. In turn we want the department_name shown on the employees input form, so this must be returned via the LOV too.
To meet this requirement follow these steps:
1) In your ADF BC model project, create 2 EOs for employees and departments.
2) Also in your model, create 2 VOs for the same EOs.
3) Open your employees VO and create a new attribute DepartmentName. Check selected in query. In expressions type (SELECT dept.department_name FROM departments dept WHERE dept.department_id = employees.department_id). Check Updateable always.
4) Create a new empty UIX page in your ViewController project called editEmployees.uix.
5) From the data control palette, drag and drop EmployeesView1 as an input-form. Notice that the new field DepartmentName is also included in the input-form.
6) As the DepartmentName will be populated either from querying existing employees records, or via the LOV, disable the field as the user should not have the ability to edit it.
7) Select the DepartmentId field and delete it. In the UI Model window delete the DepartmentId binding.
8) From the data controls palette, drag and drop the DepartmentId field as a messageLovInput onto your page. Note in your application navigator a new UIX page lovWindow0.uix (or similar) has been created for you.
9) While the lovWindow0.uix is still in italics (before you save it), rename the file to departmentsLov.uix.
10) Back in your editEmployees.uix page, your messageLovInput source will look like the following:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="${bindings.DepartmentId.path}"
    destination="lovWindow0.uix"/>Change it to be:
<messageLovInput
    model="${bindings.DepartmentId}"
    id="DepartmentId"
    destination="departmentsLov.uix"
    partialRenderMode="multiple"
    partialTargets="_uixState DepartmentName"/>11) Also change your DepartmentName source to look like the following:
<messageTextInput
    id=DepartmentName
    model="${bindings.DepartmentName}"
    columns="10"
    disabled="true"/>12) Open your departmentsLov.uix page.
13) In the data control palette, drag and drop the DepartmentId field of the DepartmentView1 as a LovTable into the Results area on your page.
14) Notice in the UI Model window that the 3 binding controls have been created for you, an iterator, a range and a binding for DepartmentId.
15) Right click on the DepartmentsLovUIModel node in the UI Model window, then create binding, display, and finally attribute. The attribute binding editor will pop up. In the select-an-iterator drop down select the DepartmentsView1Iterator. Now select DepartmentName in the attribute list and then the ok button.
16) Note in the UI Model you now have a new binding called DCDefaultControl. Select this, and in the property palette change the Id to DepartmentName.
17) View the LOV pages source, and change the lovUpdate event as follows:
<event name="lovSelect">
    <compound>
        <set value="${bindings.DepartmentId.inputValue}" target="${sessionScope}" property="MyAppDepartmentId" />
        <set value="${bindings.DepartmentName.inputValue}" target="${sessionScope}" property="MyAppDepartmentName" />
    </compound>
</event>18) Return to editEmployees.uix source, and modify the lovUpdate event to look as follows:
<event name="lovUpdate">
    <compound>
        <set value="${sessionScope.MyAppDepartmentId}" target="${bindings.DepartmentId}" property="inputValue"/>
        <set value="${sessionScope.MyAppDepartmentName}" target="${bindings.DepartmentName}" property="inputValue"/>
    </compound>
</event>Thats it. Now when you select a value in your LOV, it will return 2 (multiple!) values.
A couple things to note:
1) In the messageLovInput id field we dont use the .path notation. This is mechanism for returning 1 value from the LOV and is useless for us.
2) Again in the messageLovInput we supply _uixState as an entry in the partialTargets.
3) We are relying on partial-page-refresh functionality to update multiple items on the screen.
Im not going to take the time out to explain these 3 points, but its worthwhile you learning more about them, especially the last 2, as a separate exercise.
One other useful thing to do is, in your messageLovInput, include as a last entry in the partialTargets list MessageBox. In turn locate the messageBox control on your page (if any), and supply an id=MessageBox. This will allow the LOV to place any errors raised in the MessageBox and show them to the user.
I hope this works for you :)
Cheers,
CM.

Thanks Chris,
It took me some time to find the information I needed, how to use return multiple values from a LOV popup window, then I found your post and all problems were solved. Its working perfectly, well, almost perfectly.
Im always fighting with ADF-UIX, it never does the thing that I expect it to do, I guess its because I have a hard time letting go of the total control you have as a developer and let the framework take care of a few things.
Anyway, I'm using your example to fill 5 fields at once, one of the fields being a messageChoice (a list with countries) with a LOV to a lookup table (id , country).
I return the countryId from the popup LOV window, that works great, but it doesn't set the correct value in my messageChoice . I think its because its using the CountryId for the listbox index.
So how can I select the correct value inside my messageChoice? Come to think of it, I dont realy think its LOV related...
Can someone help me out out here?
Kind regards
Ido

How to return a single datetime from multiple rows of MAX(value) in DAX

Hi
I have a Results table with ResultTime, Balance, Equity which is updated with a new row every 5 minutes. I've used SUMX to find opening and closing balances and it has worked so far.
Res_OpeningBalance:=SUMX(TOPN(1,Results,Results[ResultTime],1),[Balance])
Res_ClosingBalance:=SUMX(TOPN(1,Results,Results[ResultTime],0),[Balance])
But when I tried it with dates, the whole thing fell apart.
Res_MaxBalance_Date:=SUMX(TOPN(1,Results,Results[Balance],0),[ResultTime])
Since the highest Balance is likely to be represented through many rows due to it lasting more than 5 minutes, ResultTime (which is unique to each row) is summed up and returns messed up dates well into the future. How to return only one date (first or last
datetime) from the rows where Balance is at max?
I tried a TOPN of TOPN, but Excel was not amused.
=SUMX(TOPN(1,Results,Results[Balance],0),TOPN(1,Results,Results[ResultTime],0))
TIA!
Re
Dennis

I still don't understand RANKX, but I figured it out anyway. I get the correct data by using:
Res_MaxBalance:=MAX(Results[Balance])
Res_MaxBalanceDate:=CALCULATE(MAX(Results[ResultTime]),FILTER(Results, Results[Balance]=MAX(Results[Balance])))
Res_MinBalance:=MIN(Results[Balance])
Res_MinBalanceDate:=CALCULATE(MAX(Results[ResultTime]),FILTER(Results, Results[Balance]=MIN(Results[Balance])))
Res_MaxEquity:=MAX(Results[Equity])
Res_MaxEquityDate:=CALCULATE(MAX(Results[ResultTime]),FILTER(Results, Results[Equity]=MAX(Results[Equity])))
Res_MinEquity:=MIN(Results[Equity])
Res_MinEquityDate:=CALCULATE(MAX(Results[ResultTime]),FILTER(Results, Results[Equity]=MIN(Results[Equity])))
Re
D

How to return a html repsonse after form guide rendering in browser?

How to return a html repsonse after form guide rendering in browser indicating that server has recieved transmission and request is submitted succesfuly?
I am rendering the form guide in browser using guide invoke service and when i submit the data in browser to server through guide , it is displaying some random number in browser?
i need to display a resposne that request is submitted successfully?

how could i define a variable with "html data" ?
Create a variable of type document and then a service to read the html from where ever it's located. If you put it in LiveCycle, you can use the ReadRessource service. If it's on the file system, you can use the Read Document. If it's in the database, you can use the JDBC service.
Also, one more doubt where should i use this variable in my process to get the same?
You want the response once you've submitted the data, so the html is really the result of calling the process that's processing the data. So I would create an output variable of type document on that process.
Right now it displays a random number in the browser because your submit process is long lived. When a process is long lived (asynchronous), you invoke it and then you get an identifier back. It's kind of a fire and forget. You can use that identifier to check the status of the long lived process, since long lived processes can take hours, days to complete. You don't want your browser to wait that long, hence the identifier.
However if you change the process to be short lived (synchronous), the browser will wait for the result of the process, which really means the output variables for that process. If your output variable contains html, it'll display html.
So the key is make you submit process short lived and populate the output variables appropriately.
Jasmin

How can I take lion off of my MacBook Pro and go back to using Snow Leopard

How can I take lion off of my MacBook Pro because it has too much problems with the new operating system, I have talked to Apple support for both computers and still nothing happens I think they know that there's something wrong and they don't know how to fix it are there working on fixing it. So how can I put snow leopard Mac on my computer so that it works every time, there's a lot of good features in Lion but there's a lot of bad features and especially when it comes to turning on your computer and the memory that it has held so if one item is missing then it doesn't work and you have to reboot the computer to get it to work but I still like my Mac.

Take a look at this:
http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/
Ciao.

How to return to Lion?

Similar Messages

Maybe you are looking for