How to return to my original project

I did realize a very simple project on fce 2.0.3, about 35mns just one clip after the other. Because of time I needed to burn a DVD as is: so I converted the project to quick time and saved on external drive the movie.
Now I want to refine the project. When I open the movie in fce I get a window ( slug) with the movie but no TL or viewer or canvas ( and they are not available on the task bar). I didn't trash anything ( knowingly) after I converted the project. Could anyone help me to figure out how to find where is my project ? and bring it back to the TL in order to be able to edit it.
Thank you for any suggestion>
i mac   Mac OS X (10.3.9)  

Thank you Ian and Tom for your answers , What I did effectively is that I had trashed my original project ( which i was able to restore) and kept only, I guess, my exported project.
But Tom I looked at the icons and both versions have the same icon (the eye of fce). By "Q" do you mean the logo of Quick Time? By the way when I export do I have to use QT movie Or QT conversion in order to burn a dvd with I-MOVIE ?
Thk you again for your help.

Similar Messages

  • How to return to the original search page after clicking on numerous links w/o using the back arrow

    I want to return to the original search page without having to click the back arrow repeatedly to get back from where I have been searching

    The Back/Forward button drop-down arrow marker was removed from Firefox.
    To get the tab history drop-down list, you can:
    *right-click the Back/Forward button
    *HOLD down the left-click mouse button on the Back/Forward button until the list appears (about 1 second)
    *Add back the drop-down marker by installing this Add-on: https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • How can I move an original Version from one Project to another Project?

    How can I move an original Version from one Project to another Project?

    From the Aperture User Manual:
    To move an image into a different project
    Drag the image [from the Browser] into another project in the Library inspector.

  • I just updated iOS on my iPhone 5. What a shock!! Where is the premium look and feel I bought my iPhone for? If I wanted the lokale feel of iOS 7.0 I would have bought a much cheeper taiwanese smartphone. Please let me know how I can return to the origina

    I just updated iOS on my iPhone 5.
    What a shock!! Where is the premium look and feel I bought my iPhone for?
    If I wanted the lokale feel of iOS 7.0 I would have bought a much cheeper taiwanese smartphone.
    Please let me know how I can return to the original look and feel of the iPhone surface I bought my phone for.

    You had plenty of time to look at screenshots on the internet and read various blog posts about iOS 7.

  • How do i return calendar to original view?   All I can see is an hour by hour grid...can't get back to page where I can enter new appointments/events

    How do I return calendar to original view?   All I can see is an hour by hour grid...can't get back to page where I can enter new appointments/events

         Hi, at the bottom bar you should see a series of five buttons. Press the "Month" button if you desire to see the view of the month. As for creating a new calendar event simply press the "+" button in the upper right-hand corner to create a new appointment. *
    * Please note that this is all within the app called "Calendar".

  • How can I make a photo from two merged projects available for a book that I started using one project ? They merge but the book only allows me to access the original project photos even though the merged photos can be seen in the project ?

    I have successfully merged two projects in order to add new photos for my book.  The library available to the book which has 26 completed pages accesses only the original project library.  Has anyone else had this problem ?  It is frustrating to see the photos I want in the merged project file, but to have only the original photos when I started the book available in the book library.

    That will work, but it is the long way 'round.
    As Frank noted, Book Albums are just specialized Albums.  Albums can show any Image in your Library, regardless of where the Album is located on the Library Inspector, and regardless of which Project contains the Image.  You can put your Albums anywhere (in a Folder called "Books" for example).  You can put Images from anywhere in your Library in any Album.
    The easy way 'round:
    - Make a new Book Album
    - Select Images you may want to put in your Book.  Flag them.
    - Select some more.  Flag them.
    - Go to the "Flagged" container (listed near the top of the Library Inspector), select all, and drag-and-drop them to your Book Album.
    - Repeat as needed, or just drag-and-drop directly into the Book Album.
    Note that you can remove any Image from any Album (including Books) by selecting and hitting the "{Delete}" key.  This _does not remove the Image from the Project that contains it, or from the Library.
    Note, too, that once the Images are in your Book Album, you then put them in the Book you are creating for publication.  The Book Album contains the superset of Images with which you populate the Book itself.  The Book Album also holds the Book.
    A good (imho ) introduction to the parts of Aperture can be found in this short guide I wrote.
    The User Manual is helpful.  Here is
    the chapter on making Books. 
    From that chapter, here is
    the section detailing how to create and populate a Book Album.

  • How do I return to the original e-Mail after opening a link?

    How do I return to the original opened e-Mail after I have opened an attachment or link?

    Double-click on the Home button, select Mail from the bottom bar. It will most likely be the first app shown there.

  • ONCE i made a photo project how do I access the original photos?

    once we make a photo project  how do I access the original photos?

    Do you mean to upload or use in another app or some such?
    There are many, many ways to access your files in iPhoto:   You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    There's a similar option in Outlook and many, many other apps.  If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    If you want to access the files with iPhoto not running:
    For users of 10.6 and later:  You can download a free Services component from MacOSXAutomation  which will give you access to the iPhoto Library from your Services Menu.
    Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    Show File:  a. On iPhoto 09 and earlier:  Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.    3.b.
    b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

  • [UIX] How To: Return multiple values from a LOV

    Hi gang
    I've been receiving a number of queries via email on how to return multiple items from a LOV using UIX thanks to earlier posts of mine on OTN. I'm unfortunately aware my previous posts on this are not that clear thanks to the nature of the forums Q&A type approach. So I thought I'd write one clear post, and then direct any queries to it from now on to save me time.
    Following is my solution to this problem. Please note it's just one method of many in skinning a cat. It's my understanding via chatting to Oracle employees that LOVs are to be changed in a future release of JDeveloper to be more like Oracle Forms LOVs, so my skinning skills may be rather bloody & crude very soon (already?).
    I'll base my example on the hr schema supplied with the standard RDBMS install.
    Say we have an UIX input-form screen to modify an employees record. The employees record has a department_id field and a fk to the departments table. Our requirement is to build a LOV for the department_id field such that we can link the employees record to any department_id in the database. In turn we want the department_name shown on the employees input form, so this must be returned via the LOV too.
    To meet this requirement follow these steps:
    1) In your ADF BC model project, create 2 EOs for employees and departments.
    2) Also in your model, create 2 VOs for the same EOs.
    3) Open your employees VO and create a new attribute DepartmentName. Check “selected in query”. In expressions type “(SELECT dept.department_name FROM departments dept WHERE dept.department_id = employees.department_id)”. Check Updateable “always”.
    4) Create a new empty UIX page in your ViewController project called editEmployees.uix.
    5) From the data control palette, drag and drop EmployeesView1 as an input-form. Notice that the new field DepartmentName is also included in the input-form.
    6) As the DepartmentName will be populated either from querying existing employees records, or via the LOV, disable the field as the user should not have the ability to edit it.
    7) Select the DepartmentId field and delete it. In the UI Model window delete the DepartmentId binding.
    8) From the data controls palette, drag and drop the DepartmentId field as a messageLovInput onto your page. Note in your application navigator a new UIX page lovWindow0.uix (or similar) has been created for you.
    9) While the lovWindow0.uix is still in italics (before you save it), rename the file to departmentsLov.uix.
    10) Back in your editEmployees.uix page, your messageLovInput source will look like the following:
    <messageLovInput
        model="${bindings.DepartmentId}"
        id="${bindings.DepartmentId.path}"
        destination="lovWindow0.uix"/>Change it to be:
    <messageLovInput
        model="${bindings.DepartmentId}"
        id="DepartmentId"
        destination="departmentsLov.uix"
        partialRenderMode="multiple"
        partialTargets="_uixState DepartmentName"/>11) Also change your DepartmentName source to look like the following:
    <messageTextInput
        id=”DepartmentName”
        model="${bindings.DepartmentName}"
        columns="10"
        disabled="true"/>12) Open your departmentsLov.uix page.
    13) In the data control palette, drag and drop the DepartmentId field of the DepartmentView1 as a LovTable into the Results area on your page.
    14) Notice in the UI Model window that the 3 binding controls have been created for you, an iterator, a range and a binding for DepartmentId.
    15) Right click on the DepartmentsLovUIModel node in the UI Model window, then create binding, display, and finally attribute. The attribute binding editor will pop up. In the select-an-iterator drop down select the DepartmentsView1Iterator. Now select DepartmentName in the attribute list and then the ok button.
    16) Note in the UI Model you now have a new binding called DCDefaultControl. Select this, and in the property palette change the Id to DepartmentName.
    17) View the LOV page’s source, and change the lovUpdate event as follows:
    <event name="lovSelect">
        <compound>
            <set value="${bindings.DepartmentId.inputValue}" target="${sessionScope}" property="MyAppDepartmentId" />
            <set value="${bindings.DepartmentName.inputValue}" target="${sessionScope}" property="MyAppDepartmentName" />
        </compound>
    </event>18) Return to editEmployees.uix source, and modify the lovUpdate event to look as follows:
    <event name="lovUpdate">
        <compound>
            <set value="${sessionScope.MyAppDepartmentId}" target="${bindings.DepartmentId}" property="inputValue"/>
            <set value="${sessionScope.MyAppDepartmentName}" target="${bindings.DepartmentName}" property="inputValue"/>     
        </compound>
    </event>That’s it. Now when you select a value in your LOV, it will return 2 (multiple!) values.
    A couple things to note:
    1) In the messageLovInput id field we don’t use the “.path” notation. This is mechanism for returning 1 value from the LOV and is useless for us.
    2) Again in the messageLovInput we supply “_uixState” as an entry in the partialTargets.
    3) We are relying on partial-page-refresh functionality to update multiple items on the screen.
    I’m not going to take the time out to explain these 3 points, but it’s worthwhile you learning more about them, especially the last 2, as a separate exercise.
    One other useful thing to do is, in your messageLovInput, include as a last entry in the partialTargets list “MessageBox”. In turn locate the messageBox control on your page (if any), and supply an id=”MessageBox”. This will allow the LOV to place any errors raised in the MessageBox and show them to the user.
    I hope this works for you :)
    Cheers,
    CM.

    Thanks Chris,
    It took me some time to find the information I needed, how to use return multiple values from a LOV popup window, then I found your post and all problems were solved. Its working perfectly, well, almost perfectly.
    Im always fighting with ADF-UIX, it never does the thing that I expect it to do, I guess its because I have a hard time letting go of the total control you have as a developer and let the framework take care of a few things.
    Anyway, I'm using your example to fill 5 fields at once, one of the fields being a messageChoice (a list with countries) with a LOV to a lookup table (id , country).
    I return the countryId from the popup LOV window, that works great, but it doesn't set the correct value in my messageChoice . I think its because its using the CountryId for the listbox index.
    So how can I select the correct value inside my messageChoice? Come to think of it, I dont realy think its LOV related...
    Can someone help me out out here?
    Kind regards
    Ido

  • How do I transfer an imovie project on one mac to another mac?

    I need to get an iMovie HD project from another Mac onto my machine to continue editing in iMovie HD 6 - some sound issues that need resolving. How can I transfer the project? The original project is too large to fit on a DVD (Dual layer). Will I have to connect both machines via ethernet and physically transfer it? If so, how do I do this - I need to have an exact clone of the project (all titles, separated audio etc...). Please help!

    'til vers6, an iM project is a 'solid' package, a single file you can easily transfer from one Mac to another.. establish a local network (ethernet, firewire or wlan/airport), allow one machine access to the other and simply drag'n drop project file (has a star as icon) onto other Mac ...
    I like the socalled 'Target Mode', MacOs allows: connect both machines by firewire, launch one Mac and hold the T key .. now, Mac is a firewire-drive, you can access as 'external harddrive' by other Mac .
    *How to use FireWire target disk mode*
    http://docs.info.apple.com/article.html?artnum=58583

  • My daughter's iPad is backing up to my iCloud, which is how we set it up originally. Now she has her own iPhone with her own iCloud. How can I get her iPad to back up to her own iCloud?

    My daughter's iPad is backing up to my iCloud, which is how we set it up originally. Now she has her own iPhone with her own iCloud. How can I get her iPad to back up to her own iCloud?  Her iPad is taking up 3.4MB of my 5MB. I need my space back!

    kat...mom wrote:
    I suppose ya.  If she deletes my account from her iPad it won't affect my account, right? 
    Yes, that's correct, it won't affect your account or your devices in any way.
    Use the delete account button in the iCloud settings.
    Then enter her iCloud details in the new screen that appears and log in. She should then be returned to the screen above but with her Apple ID at the top, enable the services she wishes to use and then tap the storage & backup option and ensure that iCloud backup is turned on.
    settings

  • Copy of original project (NWDS)

    Hi,
    I’m trying to do some work in the NWDS, and I’m having a problem. I’m need to do some changes to one of our Adobe Forms applications, but I didn’t want to work on the live version, so I tried making a copy that I can work on. But it’s not deploying.
    I have:
    •     Verified that I can successfully rebuild, deploy, and run the original application/project.
    •     Made a new copy of the original project by making a copy of all the files and sub-folders in the original folder
    •     Edited the .project and the .dcdef files in the  _comp folder so they contain the name of the new project
    •     Imported the new project into NWDS
    •     Rebuilt the new project successfully – no errors – I haven’t made any changes to the project yet.
    •     Tried to do a “Deploy and Run” of the new application.
    This is what I get:
    Apr 25, 2008 3:22:59 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
    [001]Deployment aborted
    Settings
    SDM host : abpsapdev
    SDM port : 50018
    URL to deploy : file:/C:/DOCUME1/MHANDE1/LOCALS1/Temp/temp23814abp.comcafework.ear
    Result
    => deployment aborted : file:/C:/DOCUME1/MHANDE1/LOCALS1/Temp/temp23814abp.comcafework.ear
    Aborted: development component 'cafework'/'abp.com'/'LOKAL'/'0.2008.04.25.15.22.28'/'0':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application abp.com/cafework.. Reason: Clusterwide exception: Failed to deploy application abp.com/cafework. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:        com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application abp.com/cafework. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment exception : The deployment of at least one item aborted
    Appreciate if anyone can let me know ur thoughts.
    Cheers,
    RAJU

    Sorry if I haven't done that allready.... but don't know how to explain better...., but I will give it a try
    From the portal we want to fill data into tcode ZM01 in R/3.
    In R/3 we have extended the tcode ZM01 with 2 new fields.
    We have specified the 2 fields in WebDynpro, but when we try to fill data into the WebDynpro for the 2 fields nothing is transported into R/3.
    I guess we miss to do something...
    The WebDynpro screen is a copy of the original WebDynpro to tcode ZM01, and we have just modifed the screen.

  • I see a copy--how do I locate the original?

    I see a copy in an album--how do I find the original?

    I see a copy in an album
    What do you mean by a copy? Do you mean an additional version of an image?
    If you want to see all versions of the image, select the project that the image belongs to. All versions are always in the same project. To open the project, ctrl-click the image and select "Show in Project" from the pop-up menu.
    But if you only want to see, what the original imported image file looks like, select the image and press the "m" key. this will toggle between the original master image file and the edited version.
    Regards
    Léonie

  • How can I save my iMovie Project to a DVD or Flash Drive which can be played on a PC and any DVD player

    I have an iMac, purchased in January 2011. How can I save an iMovie project to a DVD or Flash Drive which can be played on a PC or any DVD player

    I will give you a basic primer, not going to get to in depth, as far as parameters, size of project, or the storage size of your usb flash drive, etc.
    1. you have your finished iMovie project. Under iMovie>Share menu. Choose export using quicktime.
    2. make Movie self contained. This way your Mov, Mvi, etc files will be part of the movie and it can play without having to reference the events, because it is actually there.
    3. so, now on your desktop  ( or any where else set up quicktime to save your file) you will see a quicktime file.
         Drag & Drop that file on to the icon of your USB Flash Drive, etc.
    4. Details that I omitted because I admit I am not well versed. Most Likely that quicktime file is larger than your USB Flash Drive. You have to use one of quicktime compression work flows, also if you open the just created quicktime file. It will open quicktime player and under the File>Export you have to options. I have a Movie that was 42GB 1080P, I exported it as a 720P, so it would still be playable on a large screen and now the new file was less than 2.5GB.
    5. Oh, no i just realized that the file should be playable on a PC, as long as the PC has quicktime for windows installled and you left that USB formated at MS DOS as it came originally, or a PC will not recognize it. Will it open up on your Blu-Ray Player that has a USB port, not sure. Since there is no menu. but, perhaps just pushing play will start movie.
    Hope this is of some help.

  • I have lost an fcpx project. when i search it, i'm directed to a backup file, but it's just (gibberish/code) text.  how can i retrieve/restore my project?  HELP!!!???

    i have lost an fcpx project. when i search it, i'm directed to a backup file, but it's just (gibberish/code) text. 
    i think i was asked to install an update (something to do with libraries?) before i started working, but i didn't do the update.
    don't know if this has anything to do with problem.
    how can i retrieve/restore my project?  HELP!!!???

    juddfromsherman oaks wrote:
    i have lost an fcpx project. when i search it, i'm directed to a backup file, but it's just (gibberish/code) text.
    The backups for your version are date-time stamped as the name and with an extension of .fcpproject. They look like this.
    The original project is named CurrentVersion.fcpproject.
    You need to replace the CurrentVersion with the backup file and rename it to be CurrentVersion.fcpproject.
    With FCPX closed, I suggest you move the original to the Trash, but not empty it. Then promote your backup one level higher in the project folder hierarchy (to be at the same level that the original previously occupied. Then rename the backup.
    Open up FCPX, which should now recognize your project.
    Russ

Maybe you are looking for