How to return to nike+ default run settings

I tried calibrating my nike+ runs but the default calibration seems more accurate. How can I return to the default run settings? I've done this before but can't figure out how I previously did it.

dunno. might be worth asking this in the 'nike+ ipod touch forum' http://discussions.apple.com/forum.jspa?forumID=1285

Similar Messages

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

Hi,
Try saving your settings as a Preset by clicking the Preset drop down and then select Save Current Settings as a Preset.
Next try changing the settings by selecting the saved preset.
That allow saving the settings for a specific printer, I assume it may also allow selecting these settings for another printer.

How do I control the default Develop settings in LR5?

I've used LR for many years but have never figured out the following: When I work on a batch of photos in Develop, most of the time the Develop settings are on their normal defaults (e.g., 0 for most sliders; blank for lens, etc.) As I process each photo and move to the next, the settings jump back to default. Sometimes, however, this second step doesn't occur; when I open the second photo the Develop settings remain where I left them in processing the first photo. Recently, LR sometimes opens with the settings I used in the last session, even though I have closed LR in the interim.
I know how to use Copy and Paste but they don't seem to be involved. I don't know how to use Sync; I've watched a couple of tutorials but they assume a knowledge of Sync which I don't have.
Any help appreciated.

If Auto Sync is enabled and more than one image selected, any editing done to one of the photos will be done simultaneously to all the selected photos. If only a single photo is selected, it will be the only one affected. Thus, moving to a new photo that was not selected together with the previous one it will open with the default settings. Auto Sync can be enabled when multiple photos are selected either from the Settings menu or by raising the toggle switch on the Sync button at the bottom of the right-side Develop panel.
"Recently, LR sometimes opens with the settings I used in the last session, even though I have closed LR in the interim."
This is as it should be. LR should always return to the editing done in an earlier session because every edit is immediately recorded and saved in the catalog database and the old edits are reapplied to the image preview every time it is opened

Within Pro 9, how do I remove/delete default security settings?

All,
As a learning excercise, I recently password protected a document so that PRINT was disabled. However everytime I render a PDF, this security policy is applied by default requiring me to go the Security tab under Properties and select "No Security."
How can I permanently deleted this policy so that it is no long applied to newly rendered PDFs by default?
Thanks in advance!
David

I'm OK with how to remove the security settings from a document: Documents > Properties (security tab; "No Security").
What I'm looking for is the path to removing the security settings such that they are NOT applied when I convert a document to PDF. What is happening now is that when I convert a MS Word doc to PDF, the security settings are applied by default, which means I have to go the process, albeit a short one, of removing the security settings from the document - as referenced above.
So again, if I simply launch Acorbat Pro 9 (without opening of a document), what is the correct path to removing (permenently) the security settings so that they are no longer applied to a converted document by default?
Thanks in advance.

How Do I Save My Default Profile Settings?

Hi - this is driving me crazy so there obviously is a simple answer that I just can't find.
In the Develop Module I want to enable Lens Correction and Camera Calibration (from Adobe Standard to Camera Standard) and keep those settings as my Default Profile.
If I understand correctly, this Profile will be used when I import images into LR (4) always.
I know I can make these changes and apply them to images already imported but is there a way to change the Default Profile so it remains set to my options and not goes back to "Adobe Standard" for example?
Thanks

No, this is not the same as creating a new profile. That involves converting one of your raw images to DNG and then modifying and creating a profile using the DNG profile creator. I played around with it a little a couple of years ago and decided I didn't want to bother with it. So I just use the profiles that are provided from Adobe.
If you have a Canon or Nikon camera you should have profiles that match the different camera settings. You can try the different profiles on any image to find your preference. If you find that one of those profiles is the one that you use most of the time then you can make that profile to be part of your default settings. Those default settings can be modified at any time, if you should find it necessary to do so in the future.

How do I reset the default viewing settings in Acrobat 8.0?

I messed with my view settings in Acrobat 8.0- now all my PDF's can not be viewed. They come up as grey screens. I just want to go back to the defult settings that the program came with. Help please??

Thank you SO very much!

Change default print settings in PS

I was wondering if anyone knows how I could change the default print settings so that crop marks and labels are turned on by default. I've tried using automator, and making an action but haven't had any luck. Thanks.
Marcus

anyone??
It would also be nice to have a default set of commands under print settings, like paper size, media type, color management, etc.

Change default program settings

How do I change the default program settings used to open a file? I accidentally attached adobe reader as the program to open a winmail dat file and now every time I go to open a winmail dat file adobe automatically tries to open it but can't. I have a program to open winmail files and want to use that as the default. Please help.

Hello, do a Get Info in the Finder on any winmail dat file, look fot the Open With, choose your APP, then click Change All button.

Change default table settings

How do I change the default table settings in Pages? I usually want 2 columns without headings or borders, and it always defaults to 3 columns with headings and borders.

You need to create your own default template. Open the blank template & insert a table, click in it & choose the font, size, color, etc. you want in the fonts panel or format bar. You can do similar changes to inserted objects & text boxes. While you're at it resize the box if you want, set the amount of extra space in the wrap inspector, etc. Delete each text box, object & table after you've set them. Now, save this document as a template & select that template as default in preferences. If you decide to make any changes to the template down the road, just Save As Template again with the same name & replace the previous version.
Now, save this as a template then, in Pages > Preferences, select this template as the default for new documents. All of your new documents will have these settings for inserted objects, images & tables. Unfortunately, the settings won't apply to any other templates or "foreign" documents you open with Pages.
About the only thing you can’t set a template to do is remember to show invisibles & the window position. It is possible to get a template to show invisibles when opened, if you want. Save this document as a document then, in the Finder, change the extension from .pages to .template & put it in your My Templates folder in HD > Users > (your account) > Library > Application Support > iWork > Pages > Templates > My Templates.Set up your document with the line spacing, margins, headers, etc. as you'd like. Redefine all of the paragraph & character styles to have your desired font.

How to return to default settings

How to return a desktop to factory settings

No need to respond to this question. I believe I found what i was looking for.

Hi, how can i return back safari default search engine?

How can I return back safari default search engine? It has been changed after trying to download adobe flash player.

You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Micro

When I download Microsoft word documents (if have word 2007), I have somehow changed the settings and it downloads them in wordpad, and the format is very bad and I can't read a lot of the document. How do I change the default setting back to using Microsoft Word 2007 to open these documents?
== This happened ==
Every time Firefox opened
== about a few weeks ago - I had tried to open some docuuments saved on a mac, my PC (which runs Windows 7), used word pad to open these, and this seems to have changed the default settings somehow.

See this:
[http://support.mozilla.com/en-US/kb/Managing+file+types]

How to config not to use Default run target

Hi All,
How can I config Jdeveloper9.0.3 not to use runner's "default run target" from "project settings", instead, to use welcome file list in web.xml?
thanks a lot!

This is currently how it is implemented in JDev903. The JDev webapp runner uses the project default run target instead of using the directory and relying on the welcome files in the web.xml.
Obviously a workaround is to set the default run target to observe the welcome file in the web.xml.
We haven't really seen people asking for this to be implemented in our webapprunner but we'll discuss it..

How Can I Change Default Zoom Settings For Safari?

I just got my new iMac and hate the fact that everytime I open Safari everything is small and centered directly in the Safari screen. How can I change the default settings so it either zooms in more or is in a landscaped mode so I don't have two big white patches on the sides of my window?

The only way I know of, (and that I use) is as follows:
Open textedit and create a new document.
Add the following 3 lines to the file
body {
zoom: 175%
Save the file as "somename.css". I called mine defaultzoom.css and saved it in Documents.
In Safari go to Preferences | Advanced.
In the Style sheet: dropdown box choose "other" and browse to the location of your somename.css file.
That's it, now webpages will open with the default zoom level you used in the file (I use 175% but you need to tweak it for your screen size). Also, I do run into situations where some pages don't render correctly. If that happens you can go back to Safari | Preferences | Advanced and change the Style sheet dropdown box to none until you are done viewing that paticular website. Then just put it back when you are done.

How do I restore a MacBook running 10.8.4 to original settings?

How do I restore a MacBook running 10.8.4 to original settings? I would like it cleaned of all user files and running 10.8.4.

Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
Note that if you are selling or otherwise disposing of the computer you should follow these guidelines:
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right
              side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
              sure to opt for that.
               Destination means a freshly erased external backup drive. Source means the internal
               startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

How to return to nike+ default run settings

Similar Messages

Maybe you are looking for