How to return to UWL from the launced web dynpro
Hi guys,
Our UWL can launch a web dynpro program, what we want is a close button in our web dynrpo view which close the web dynpro application and return to the UWL. Now we can close the web dynrpo application but the screen can't return to the UWL, how to do this, thank you!
Regards,
Xiaoming Yang
Hi,
Try to follow the below threads.Hope these might be useful.
Going Back to UWL from WebDynpro Application
Navigate back to UWL from WD Java
Rgds,
Santhosh
Similar Messages
-
How to see "console output" from the java web start ?
Hi all.
I wish to see logging infomation from the client side when using java web start technologie (java1.6 version).
Please help.
Thak'sUse the "Advanced" tab of the Java Control Panel to turn on "tracing" and/or the Java Console.
see:
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/troubleshooting.03.06.html
/Andy -
How to return marked values from the FM F4IF_INT_TABLE_VALUE_REQUEST
Hello all.
I'm using the FM F4IF_INT_TABLE_VALUE_REQUEST with multiple choise activated.
My problem is: if I mark, for example - 2 choises from 5, and then press OK.
If i go in to the same F4 button, I what to see the same marks like before..
At the moment, if i go in again to the same F4, nothing is marked, as if i'm going in for the first time.
Can someone help me?Hi Barak,
I don't think you can achieve this functionality using this FM. Even I think this is not there in standard SAP help, please check.
Regards,
Atish -
Remove duplicate entries from dropdownlist in web dynpro abap
How to remove duplicate entries from dropdownlist in web dynpro abap? Can someone please help me
I have maintained the data in the z table wherein the records of particular fields are repeated but when i show that record in the Web Dynpro application dropdown list, the user should only be able to view the unique data for selection of that particular field.Hi,
try this code in init method.
use the
Delete adjacent duplicates.
<set the table>
select <f1> from <table> into TABLE <Itab> whre <condition>.
DELETE ADJACENT DUPLICATES FROM <Itab> COMPARING <f1>.
lo_nd_vbap->bind_table( new_items = <itab> set_initial_elements = abap_true ). -
Add/Delete elements from viewcontaineruielement in web dynpro abap
Dear all,
Please let me know how to Add/Delete elements from viewcontaineruielement in web dynpro abap? I have copied a viewcontaineruielement from another program and now i dont want few elements from that viewcontaineruielement in my view. Please guideHi Ajinkya,
I have copied a viewcontaineruielement from another program and now i dont want few elements from that viewcontaineruielement in my view. Please guide
Have you saved that VC element as template and using that template in another component?.If so,on resuing that VC element template it populates all the screen elements which you've save as template.
Now, select that VC element which you've re-used,based on you're requirement add/remove UI elements as Kiran suggested.
Hope it will resolve your issue.
Thanks
KH -
[UIX] How To: Return multiple values from a LOV
Hi gang
I've been receiving a number of queries via email on how to return multiple items from a LOV using UIX thanks to earlier posts of mine on OTN. I'm unfortunately aware my previous posts on this are not that clear thanks to the nature of the forums Q&A type approach. So I thought I'd write one clear post, and then direct any queries to it from now on to save me time.
Following is my solution to this problem. Please note it's just one method of many in skinning a cat. It's my understanding via chatting to Oracle employees that LOVs are to be changed in a future release of JDeveloper to be more like Oracle Forms LOVs, so my skinning skills may be rather bloody & crude very soon (already?).
I'll base my example on the hr schema supplied with the standard RDBMS install.
Say we have an UIX input-form screen to modify an employees record. The employees record has a department_id field and a fk to the departments table. Our requirement is to build a LOV for the department_id field such that we can link the employees record to any department_id in the database. In turn we want the department_name shown on the employees input form, so this must be returned via the LOV too.
To meet this requirement follow these steps:
1) In your ADF BC model project, create 2 EOs for employees and departments.
2) Also in your model, create 2 VOs for the same EOs.
3) Open your employees VO and create a new attribute DepartmentName. Check selected in query. In expressions type (SELECT dept.department_name FROM departments dept WHERE dept.department_id = employees.department_id). Check Updateable always.
4) Create a new empty UIX page in your ViewController project called editEmployees.uix.
5) From the data control palette, drag and drop EmployeesView1 as an input-form. Notice that the new field DepartmentName is also included in the input-form.
6) As the DepartmentName will be populated either from querying existing employees records, or via the LOV, disable the field as the user should not have the ability to edit it.
7) Select the DepartmentId field and delete it. In the UI Model window delete the DepartmentId binding.
8) From the data controls palette, drag and drop the DepartmentId field as a messageLovInput onto your page. Note in your application navigator a new UIX page lovWindow0.uix (or similar) has been created for you.
9) While the lovWindow0.uix is still in italics (before you save it), rename the file to departmentsLov.uix.
10) Back in your editEmployees.uix page, your messageLovInput source will look like the following:
<messageLovInput
model="${bindings.DepartmentId}"
id="${bindings.DepartmentId.path}"
destination="lovWindow0.uix"/>Change it to be:
<messageLovInput
model="${bindings.DepartmentId}"
id="DepartmentId"
destination="departmentsLov.uix"
partialRenderMode="multiple"
partialTargets="_uixState DepartmentName"/>11) Also change your DepartmentName source to look like the following:
<messageTextInput
id=DepartmentName
model="${bindings.DepartmentName}"
columns="10"
disabled="true"/>12) Open your departmentsLov.uix page.
13) In the data control palette, drag and drop the DepartmentId field of the DepartmentView1 as a LovTable into the Results area on your page.
14) Notice in the UI Model window that the 3 binding controls have been created for you, an iterator, a range and a binding for DepartmentId.
15) Right click on the DepartmentsLovUIModel node in the UI Model window, then create binding, display, and finally attribute. The attribute binding editor will pop up. In the select-an-iterator drop down select the DepartmentsView1Iterator. Now select DepartmentName in the attribute list and then the ok button.
16) Note in the UI Model you now have a new binding called DCDefaultControl. Select this, and in the property palette change the Id to DepartmentName.
17) View the LOV pages source, and change the lovUpdate event as follows:
<event name="lovSelect">
<compound>
<set value="${bindings.DepartmentId.inputValue}" target="${sessionScope}" property="MyAppDepartmentId" />
<set value="${bindings.DepartmentName.inputValue}" target="${sessionScope}" property="MyAppDepartmentName" />
</compound>
</event>18) Return to editEmployees.uix source, and modify the lovUpdate event to look as follows:
<event name="lovUpdate">
<compound>
<set value="${sessionScope.MyAppDepartmentId}" target="${bindings.DepartmentId}" property="inputValue"/>
<set value="${sessionScope.MyAppDepartmentName}" target="${bindings.DepartmentName}" property="inputValue"/>
</compound>
</event>Thats it. Now when you select a value in your LOV, it will return 2 (multiple!) values.
A couple things to note:
1) In the messageLovInput id field we dont use the .path notation. This is mechanism for returning 1 value from the LOV and is useless for us.
2) Again in the messageLovInput we supply _uixState as an entry in the partialTargets.
3) We are relying on partial-page-refresh functionality to update multiple items on the screen.
Im not going to take the time out to explain these 3 points, but its worthwhile you learning more about them, especially the last 2, as a separate exercise.
One other useful thing to do is, in your messageLovInput, include as a last entry in the partialTargets list MessageBox. In turn locate the messageBox control on your page (if any), and supply an id=MessageBox. This will allow the LOV to place any errors raised in the MessageBox and show them to the user.
I hope this works for you :)
Cheers,
CM.Thanks Chris,
It took me some time to find the information I needed, how to use return multiple values from a LOV popup window, then I found your post and all problems were solved. Its working perfectly, well, almost perfectly.
Im always fighting with ADF-UIX, it never does the thing that I expect it to do, I guess its because I have a hard time letting go of the total control you have as a developer and let the framework take care of a few things.
Anyway, I'm using your example to fill 5 fields at once, one of the fields being a messageChoice (a list with countries) with a LOV to a lookup table (id , country).
I return the countryId from the popup LOV window, that works great, but it doesn't set the correct value in my messageChoice . I think its because its using the CountryId for the listbox index.
So how can I select the correct value inside my messageChoice? Come to think of it, I dont realy think its LOV related...
Can someone help me out out here?
Kind regards
Ido -
How to know about Description from the TransType...?
Hi All,
I have used SBO 2005 A PL 43 SP1 and have some queries below:
SELECT TOP 100 PERCENT T0.DocDate, T0.TransType, CAST(T0.BASE_REF as char) AS BASE_REF, T0.Warehouse, T0.CardCode, T0.CardName, T0.xInQty, T0.xOutQty, T0.Price, T0.Currency , T1.ItemName, T1.SuppCatNum, CAST(T0.InvntAct as char) AS InvntAct, T2.AcctName, T0.StatusDescr
FROM vwOINM_DEL0_02 T0 INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode LEFT OUTER JOIN OACT T2 ON T0.InvntAct = T2.AcctCode
WHERE (T0.ItemCode = 'RO00 0465') AND (CAST(T0.TransType AS char(3)) + CAST(T0.CardCode AS char) IN ('13 ZZ0 Cash&Carry') OR (T0.TransType <> 13))
AND (T0.xDocDate BETWEEN CONVERT(DATETIME, '2008-01-01 00:00:00', 102) AND CONVERT(DATETIME, '2008-11-25 00:00:00',102)) ORDER BY T0.DocDate, T0.TransNum
TransType -
> is a field name on table "OINM"
How to know about Description from the TransType and where can we relate to the table?
example :
TransType Description
====================
15 Delivery
13 AR Invoice
59 Goods Receipt
60 Goods Issue
Please anybody can help me...?
Regards,
AgungYou can use function on sql side which to proper transid returns desciption.
The function is as
create FUNCTION [dbo].[trans](@trans integer)
RETURNS varchar(100)
AS
BEGIN
DECLARE @ret varchar(100)
select @ret =
case @trans
when 1 then 'oChartOfAccounts'
when 2 then 'oBusinessPartners'
when 3 then 'oBanks'
when 4 then 'oItems'
when 5 then 'oVatGroups'
when 6 then 'oPriceLists'
when 7 then 'oSpecialPrices'
when 8 then 'oItemProperties'
when 12 then 'oUsers'
when 13 then 'oInvoices'
when 14 then 'oCreditNotes'
when 15 then 'oDeliveryNotes'
when 16 then 'oReturns'
when 17 then 'oOrders'
when 18 then 'oPurchaseInvoices'
when 19 then 'oPurchaseCreditNotes'
when 20 then 'oPurchaseDeliveryNotes'
when 21 then 'oPurchaseReturns'
when 22 then 'oPurchaseOrders'
when 23 then 'oQuotations'
when 24 then 'oIncomingPayments'
when 28 then 'oJournalVouchers'
when 30 then 'oJournalEntries'
when 31 then 'oStockTakings'
when 33 then 'oContacts'
when 36 then 'oCreditCards'
when 37 then 'oCurrencyCodes'
when 40 then 'oPaymentTermsTypes'
when 42 then 'oBankPages'
when 43 then 'oManufacturers'
when 46 then 'oVendorPayments'
when 48 then 'oLandedCostsCodes'
when 49 then 'oShippingTypes'
when 50 then 'oLengthMeasures'
when 51 then 'oWeightMeasures'
when 52 then 'oItemGroups'
when 53 then 'oSalesPersons'
when 56 then 'oCustomsGroups'
when 57 then 'oChecksforPayment'
when 59 then 'oInventoryGenEntry'
when 60 then 'oInventoryGenExit'
when 64 then 'oWarehouses'
when 65 then 'oCommissionGroups'
when 66 then 'oProductTrees'
when 67 then 'oStockTransfer'
when 68 then 'oWorkOrders'
when 70 then 'oCreditPaymentMethods'
when 71 then 'oCreditCardPayments'
when 73 then 'oAlternateCatNum'
when 77 then 'oBudget'
when 78 then 'oBudgetDistribution'
when 81 then 'oMessages'
when 91 then 'oBudgetScenarios'
when 97 then 'oSalesOpportunities'
when 93 then 'oUserDefaultGroups'
when 101 then 'oSalesStages'
when 103 then 'oActivityTypes'
when 104 then 'oActivityLocations'
when 112 then 'oDrafts'
when 116 then 'oDeductionTaxHierarchies'
when 117 then 'oDeductionTaxGroups'
when 125 then 'oAdditionalExpenses'
when 126 then 'oSalesTaxAuthorities'
when 127 then 'oSalesTaxAuthoritiesTypes'
when 128 then 'oSalesTaxCodes'
when 134 then 'oQueryCategories'
when 138 then 'oFactoringIndicators'
when 140 then 'oPaymentsDrafts'
when 142 then 'oAccountSegmentations'
when 143 then 'oAccountSegmentationCategories'
when 144 then 'oWarehouseLocations'
when 145 then 'oForms1099'
when 146 then 'oInventoryCycles'
when 147 then 'oWizardPaymentMethods'
when 150 then 'oBPPriorities'
when 151 then 'oDunningLetters'
when 152 then 'oUserFields'
when 153 then 'oUserTables'
when 156 then 'oPickLists'
when 158 then 'oPaymentRunExport'
when 160 then 'oUserQueries'
when 162 then 'oMaterialRevaluation'
when 163 then 'oCorrectionPurchaseInvoice'
when 164 then 'oCorrectionPurchaseInvoiceReversal'
when 165 then 'oCorrectionInvoice'
when 166 then 'oCorrectionInvoiceReversal'
when 170 then 'oContractTemplates'
when 171 then 'oEmployeesInfo'
when 176 then 'oCustomerEquipmentCards'
when 178 then 'oWithholdingTaxCodes'
when 182 then 'oBillOfExchangeTransactions'
when 189 then 'oKnowledgeBaseSolutions'
when 190 then 'oServiceContracts'
when 191 then 'oServiceCalls'
when 193 then 'oUserKeys'
when 194 then 'oQueue'
when 198 then 'oSalesForecast'
when 200 then 'oTerritories'
when 201 then 'oIndustries'
when 202 then 'oProductionOrders'
when 205 then 'oPackagesTypes'
when 206 then 'oUserObjectsMD'
when 211 then 'oTeams'
when 212 then 'oRelationships'
when 214 then 'oUserPermissionTree'
when 217 then 'oActivityStatus'
when 218 then 'oChooseFromList'
when 219 then 'oFormattedSearches'
when 221 then 'oAttachments2'
when 223 then 'oUserLanguages'
when 224 then 'oMultiLanguageTranslations'
when 229 then 'oDynamicSystemStrings'
when 231 then 'oHouseBankAccounts'
when 247 then 'oBusinessPlaces'
when 250 then 'oLocalEra'
when 280 then 'oSalesTaxInvoice'
when 281 then 'oPurchaseTaxInvoice'
when 300 then 'BoRecordset'
when 305 then 'BoBridge'
when 260 then 'oNotaFiscalUsage'
when 258 then 'oNotaFiscalCFOP'
when 259 then 'oNotaFiscalCST'
when 261 then 'oClosingDateProcedure'
when 10 then 'oBusinessPartnerGroups'
when 278 then 'oBPFiscalRegistryID'
else '?' end
return @ret
end
and call it as
SELECT TOP 100 PERCENT T0.DocDate, dbo.trans(T0.TransType), CAST(T0 .... -
How to get maximal value from the data/class for show in Map legend
I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomouse this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01 -
How to remove available downloads from the list
how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?
There is not a way to remove them from the list. Just let them download, and then delete them from your library when they are done.
-
How to select multiple values from the parameters in BI Publisher report
How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...
Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj -
How to select multiple values from the Parameters in the concurrent program
How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?
I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc. -
How to download a file from the net and save it into .txt format in a datab
Can some one show me a tutorial on how to download a file from the net and save it into .txt format in a database?
Thank you,http://java.sun.com/docs/books/tutorial/networking/urls/readingWriting.html
-
How to download a file from the internet using terminal
how to download a file from the internet using terminal
does any one know how to download afile from the internet using the Terminal application?Use curl. Something like this:
curl -O http://www.example.com/filename.zip
For more info, type +man curl+. -
How to call a package from the Report in Oracle Application Express
How to call a package from the Report in Oracle Application Express
Hello,
What do you mean? Something like SELECT mypackage.function( par1, par2) from dual?
Or do you want to execute a procedure when something happens on the page, like clicking a button?
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-) -
I have playlists on my original iPod but are not in the library. How can I move them from the iPod to the library?
She can choose to either enable the setting on her iPod to Manually manage music and videos. With setting enabled she can sync content to her iPod from multiple computers without it affecting whats already stored her iPod. For more information on syncing content to an iPod manually see this article.
http://support.apple.com/kb/ht1535
However, I would recommend copying whats on her iPod to her iTunes library first. There are several ways to accomplish this. See this older post from another forum member Zevoneer discussing the different ways to do it.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock
Maybe you are looking for
-
I had synced my phone onto a different iTunes account without thinking about it. I had purchased a few songs and episodes from the iTunes library and now I'm having a hard time recovering them. The new iTunes lets you purchase previously downloaded a
-
Run time error during message mapping transformation
Hello, i created a scenario and tried to execute . i got this error . RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ZCRM_CRMXIF_ORDER_SAVE_M01/IDOC/BEGIN. The message is: Exception
-
My new ipod touch has no icons just background screen. Is this normal?
My new ipod touch has no icons, just background screen. Help?
-
Makecontext - backward compatibilty from Soalris 10 and 9
Hi all, As I understand it, The makecontext() function was apperantley changed in Solaris 9, in the following ways, that are clearly related to each other: void makecontext(ucontext_t *ucp, void(*func)(), int argc, ...); 1) argc is now repersenitng t
-
Report Designer 2.5 and Richwin
I have installed Developer2000 (forms 4.5 and report2.5) and developer 6.0. After i install richwin, i find that the report 2.5 would be terminated automatically when i double click the layout on a already built report. Can any expert tell me what's