How to revers theinternal order

How to revers the internal order that has been already converted to the PO. What is the T-Code to do that??
pls advice.
Thanx

Hi
Only transaction data can be reversed and not the master data.
As a PO has been created with wrong IO assignment create a new PO with the correct IO and block the old PO by making the line items as marked for deletion.
This should solve your isse.
Good Luck
Hari

Similar Messages

How to settle an order

Dear Consultants,
I have created an order in CO01...
I have done everything with that order.. the status of the order is DLV...
Kindly tell me how to settle the order...In detail..
Thank you all..
karthick

Dear,
You should follow following steps for Order Settlement after confirmation :
1. After Final Confirmation of Order ( Status : CNF) make GR for for order using Tcode : MIGO / MB31 so Production Order Status will be DLV.
2. Then complete the order technically by using Tcode : CO02--> Functions ( Menu)---> Restrict Processing -
> Technically Complete. You can carry out TECO for multiple Orders in Tcode : COHV (Mass Processing).
3.Now Calculate Overheads using Tcode : KGI2 - Individual Processing
CO43 - Collective Processing
4.Calculate WIP using Tcode : KKAX - Individual Processing
KKAO - Collective Processing
5.Calculate Variance by using Tcode : KKS2 - Individual Processing
KKS1 - Collective Processing
6.Finally do the settlement of Order in Tcode : KO88 - Individual Processing
CO88 - Collective Processing
Hope this helps.
Regards,
Tejas

How to make an order on repeating frame using Formula Column?

Hi All,
I have a repeating frame dependent on some query, how to make an order on this repeating frame using a formula column defined in its group and dependet on values from the query?
Note: I'm using Reports 6i

Place your formula column at the top of the itm group and set the BREAK_ORDER to assc.. or desc...
Hope this helps
Hamid
if problem solved, close the thread.

How to assign an order to a GL account

Hi all,
Can anybody please let me know how to assign an order to the GL account?
Thanks,
S.Sumana.

Hi,
There is no such an assignment. When you post a document, you define your G/L accounts and cost objects. If you want to make a default internal order for certain cost element, you can go to KA02 or OKB9 and define the defaults there.
Regards,
Eli

How to trace purchase order number with respect to Purchase requestion numb

Hi friends,
Can u please help me how to Trace purchase order number with respect to purchase Requetuion number. Is there any standard report available in R/3

Hi Vamsi,
Thats what!!!
Goto SE16 - EBAN - Give PR number in the iput screen.
In the output screen you will have to do field selection from Menu - Settings - formatlist - choose fields.
There you choose Purchase Order.
So the output will display for you POs for the PR that you entered.
Regards,
Vishal

How to block an order if the price is too low?

Hello,
My problem is :
How to block an order if the price is too low?
I created a new type of condition ZMIN and an access by material.
When the net price is below the minimum price the system must position the order on incomplete document for error of price.
Thank you in advance.
Frédéric Blaise
e-Kenz S.A.

Hello,
you can enter a lower limit in the condition record:
Lower limit of the condition rate/amount
Indicates whether, during document processing, the system checks if manual changes fall short of the lower limit allowed for the corresponding condition record.
Use
When you maintain the scales in a condition record, the system checks whether the scale value falls below the lower limit.
Or you can use the flag 'conditon update'.
Condition update
Controls whether limit values are relevant for pricing.
E.g.: you can make the use of a particular condition record in the document dependent on a specified total value.
This total value can be specified in the condition record.
I hope that the information are helpful.
With best regards
Claudia Neudeck

How to trace production order history

Hi,
how to trace production order history, with all information like some addtion and deletion of components in production order.
I need the history like how we are doing ECM in master data history.
Regards,
S.Suresh.
Edited by: suresh subramanian on Jul 16, 2008 7:31 AM

Dear Suresh,
Please refer the link,[http://help.sap.com/saphelp_46c/helpdata/en/35/ce8d378d0302cae10000009b38f9b7/frameset.htm]
Regards,
R.Brahmankar

How to cancel an order if transaction not complete

How to cancel an order if transaction not complete

Presuming you're referring to a purchase from the iTunes Store, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Refunds are not guaranteed, but iTunes support should be able to help you in one way or another.
Regards.

How to cancel an order or to remove one item, bought as a guest?

how to cancel an order or to remove one item, bought as a guest?

That does not help at all.
Please explain. Use sentences please.
How do you buy something as a guest?
You have an iphone?
You purchased an app?
You don't want the app? Simply delete it. This is covered in the manual.
If you do not explain what you are talking about, then it is very difficult to help

How to compare sale order bom and production order bom.

i would like to provide report with respect to comparation of sale order bom and production order bom, but i am not familiar with SD and PP, can anyone give me some clue? i only know sale order bom is created via 'CS61', afterwards run mrp to get production order, the process appears complicated, i needn't know the process detail, just want to know how to get sale order bom and relative production order bom. please guide me.

Hi,
Check Tcode:CS14 to SD/PP BOM's
Chidambaram

How to block production order creation when maintenance order is generated.

Hi All,
Kindly share how to block production order generation when maintenance order is generated.

Integration between PP module and PM module
PP/PM Workcenter Integration
There are many threads & documents available. Please do some search.

How can I change order of email accounts in Mail on Mountain Lion?

In Mail on Mountain Lion I have only two email accounts, but the wrong one has been set as default (because it was an account I had overlooked and added later). I cannot find how to change the order of the email accounts. One possibility is to delete the non-default account and re-add it, so that it becomes the most recent and thus (presumably) the default, but this would delete all the email messages in that account, which I cannot afford.
It's a great flaming pain to try to remember each email I write to select the second account option, and yet I can find no way to change email account order---not in Mail and not in System Preferences. Dragging them certainly does not work.
Can Apple have really missed this? Is there any solution?

Comfortable with terminal...know how to edit using TextEdit:
Open up a Terminal and use the following commands to change your Mail.app preferences file to an XML format – the default format is binary, and you can't edit this.
cd ~/Library/Preferences
plutil -convert xml1 com.apple.mail.plist
Then, open this file com.apple.mail.plist with a text editor of your choice, preferably one that highlights XML syntax, but you can also use TextEdit:
open -a "TextEdit" com.apple.mail.plist
Now, look for the key called MailAccounts. It's value is an array, with dict children. Here, you'll find all your mail accounts in the order they were created in.
You can now manually move these dict children around. Save the XML file and reopen Mail. Now, your Mail account order will be changed.

How can i use Order by inside a sub query in Oracle

Hi!,
Please help me, it's an urgent... how can i use Order by clause
SELECT SalesProductKeyID,ActualUnitPrice,BillDateKeyID,ProductKeyID
,Qty,Profit,DD.dDate
, (SELECT nvl(S.Qty,0) FROM Stock S , DateDimension DD1
WHERE S.DateKeyID = DD1.DateKeyID AND
S.ProductKeyID = SF.ProductKeyID AND
DD1.dDate <= DD.dDate and rownum=1
ORDER BY DD1.dDate DESC*) as StockQty
, (SELECT nvl(SUM(Qty),0) from salesfact SF2,DATEDIMENSION DD2
WHERE SF2.BillDateKeyID=DD2.DatekeyID AND SF2.ProductKeyID=SF.ProductKeyid
AND DD2.dDate > DD.dDate
AND DD2.dDATE=DD.dDate
) as TotalQtySold
FROM SalesFact SF INNER JOIN DATEDIMENSION DD
ON SF.billdatekeyid =DD.Datekeyid
WHERE
IsProfitCalculated = 1 AND
IsSalesFactSuppPopulated =0 AND
Qty > 0;
kindly help
Thank you.

Actually I'm converting Procedures from SQL Server to Oracle.
Actual Stored Procedure in SQL Server is as follows.
SELECT --top 10000
SalesProductKeyID,ActualUnitPrice,BillDateKeyID,ProductKeyID
,Qty,Profit,DD.Date
, (SELECT TOP 1 ISNULL(S.Qty,0) FROM dbo.Stock S , dbo.DateDimension DD1
WHERE S.DateKeyID = DD1.DateKeyID AND
S.ProductKeyID = SF.ProductKeyID AND
DD1.Date <= DD.Date
ORDER BY DD1.Date DESC) as StockQty
, (SELECT ISNULL(SUM(Qty),0) from salesfact SF2,DATEDIMENSION DD2
WHERE SF2.BillDateKeyID=DD2.DatekeyID AND SF2.ProductKeyID=SF.ProductKeyid
AND DD2.Date > DD.Date
AND DD2.DATE=DD.Date
) as TotalQtySold
--INTO TEMP_Salesfact
FROM dbo.SalesFact SF INNER JOIN DATEDIMENSION DD
ON SF.billdatekeyid =DD.Datekeyid
WHERE
IsProfitCalculated = 1 AND
IsSalesFactSuppPopulated =0 AND
Qty > 0

WMS : How to Process Sales Order Released before Turning on WMS

Hello Gurus,
How to process sales orders released before WMS enable flag is turned on in the new WMS enviournment in Oracle 11.5.10 ?

Helios,
Thanks for the document.
I m looking for how to perform Pick confirm transactions for already printed Pick slips before WMS enabled flag is turn on for the org.
One option is to close all the deliveries but if there is no on hand at that point the they will remain option.
Other option is to Back order those deliveries and re release them post wms enable flag is turned on... The only issue i see here is that if there are more new orders for one of the items and the orders are released then which orders will get allocated/reserved if there is limited on hand quantity to statisfy the SO need.
Let me know if you can think off some alternative solution.
Apprecite help !!
Thanks,
Sam

How to change purchase order's cost center in batch

Dear all :
how to change purchase order's cost center in batch?

Dear Manish :
thanks so much for you reply.
the filed which i wanted to change it's content is cost center (KOSTL) in table EKKN.
i couldn't find it in this t-code when i select fields.

How to revers theinternal order

Similar Messages

Maybe you are looking for