How to reverse AFS MRP

Hi,
Iu2019m using make to order concept and I created a sales order for a finish goods material. Raw materials are attached to the finish good material in the BOM.
Sales order quantity display in the blocked tab of the AFS MD04 screen.
I ran the AFS MRP (/N/AFS/MD02) and plan order is created and moved to the E Tab of the AFS MD04 screen (/N/AFS/MD04).
I want to reverse the MRP run and need to bring everything in to the before MRP run state. Please advise me how to reverse the MRP run.
Regards,
Tutoo

Hello tutoo2009 ,
Can you explain why you are looking to reverse MRP run. If it is a test environment then you can reverse MRP entries by just deleting the sale order. Next Run MRP again. Since the demand element (Sale order) is deleted all supply elements created by MRP will be also deleted & hence meets your requirement to reverse MRP.
Next you can Recreate the sale order again.
You can do the same even in production environment if it is acceptable for sales person to delete & recreate sale order again
Hope this helps. Good luck.
Thanks,
Ramm

Similar Messages

AFS MRP Run based on Category (Quality Grade-A, Quality Grade-B Etc.)

Hello All,
We have a requirement in AFS MRP Run.
MRP should suggest the replinsment quantities for the higher quality material when there is a deviation in quality.
E.g:
The Customer requirement is 100PC of Quality Grade-A.
But after quality chack, produced quanities are of Quality Grade-A : 90PC and Quality Grade-B : 10 PC.
How to replenish the shortage quanity of Quality Grade-A:10PC.
As the Customer will not accept the Quality Grade-B Product.
Our GR is for 90+10 PC against the Order, there is no scrap also.
How to map this requirement in AFS.
MRP should suggest the replinishment quantities as per the category.
This is a critical issue for us now. Suggestions will be rewarded.
Thaks,
Siva

Dear Siva,
First of all don't show your reward gimmick to get a solutions. As you are aware, we are not here to get a reward / bonus points. We are here to support and help SAP Community.
This scenario can't be mapped directly in Std. SAP R/3 System with best of my knowledge.
Please note that Quality scoring / Grading will come after Goods Receipt in SAP System.
If you want to take care at the time of MRP run, then you have to create separate material / article master codes with your desired characteristics.
Based on your MRP type, system will create demand, I mean Purchase Requisition. This demand you can convert into PO for both Quality Grades.
Based on your usage decision, you can accept desired material Grade and other Grade you can Reject and sent to Vendor.
If you have accepted in first place then if you want to Return back (inferior grade material) then you can use Return PO.
Hope this info will be useful.
Bye,
Muralidhara

I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I paid for apps, i demand my updates

I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I dont care if i owe apple's itunes appstore a few dollars over 2 in app purchases i never meant to download in fact the whole app itself i wanted to delete...but out of the hundreds (maybe lower thousands) fof dollars in music and apps and whatever else, that i rightfully purchased over the passed couple of years....should *NOT* have the upgrades and/or previous purchased songs withheld from me over $3 in accidently purchased add ons through an existing app i deleted an disliked anyway

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

How to reverse cross company cleared document?

Dear all,
Can anybody guide me how to reverse a cross company cleared document?
Earliest revert would be grateful.
Regards,
Sudish

Hi,
Go to the line items of the document 1000000502 and find out the clearing document number. Then reset the clearing in that clearing document number first and then reverse the document 1000000502 in FBU8
In case document 1000000502 does not have any cleared line item, then you can directly reverse it in FBU8 transaction.
Regards,
Gaurav

How to reverse the posted depreciation for a particular period..?

Hi Experts,
Please solve my problem, that my client users are changed the depreciation key in last month as per legal requirement. While changing the depreciation key they select the wrong depreciation key and run the depreciation in AFAB. But after running the depreciation they came to know that amount is wrong because of the wrong depreciation key. So now they want reverse the entry for last month only and post the new entry with changed depreciation key.
Please give me advise how to reverse depreciation for only Last month. That should effect the all previous posting.
Regards
Narendra

Hi,
Depreciation Posted of only of the Previous Fiscal years
can be reversed using ABZU Write-Up.
ABZU -->Reverse the Past
Dep. For current depreciation reversal you have no alternative except reversing
co code depreciation document posted using OAGL and then repost it.
Regards

How to reverse proposal posting in F.05 - For exchng Valuation

Hi,
When we do foriegn exchange valuation through F.05 it creates a proposal posting and a session SAPF100, only when we run the batch input session the actual postings take place. But before processing the Batch session if i try to execute again F.05, it doesnot pick up the previous proposal postings. Our client has used a Recon A/c as a balance sheet adjustment account and now when they are doing the Valuation of open items using f.05 all the batchjobs are going in error, thats why we have changed the Balance sheet adjustment a/c , but the system it is not picking up the previous posting proposals, we guess that they are updating in some internal table, please let me know how to reverse these proposal postings. I have tried by deleting the batch input sessions, but its of no use.
Thanking you in advance
Sai

Hi,
it seems that you have selected the "balance sheet valuation" flag (right below "Create postings) when executed F.05 for the first time. Doing so, not only a batch input session will be created, but the original open items are updated. You can check this when displaying any of those items simply in FB03, go into that open item, and then choose the menu path Environment --> Valuation --> Display values. If you can see some figures there, then I my assumption is correct.
Now, when you try to run F.05 again (no changes to the data in the meantime), then the same open items don't get revaluated again. This has honestly nothing to do with the fact whether you have processed the batch input session or not. The reason you can se yourself in the column called "Old difference" in the list of the 2nd F.05 run. You will notice that this old difference (shown in FB03) is the same as the currently calulated difference, so for this time, there is nothing more to post. That's why you wont see new items, using your changed G/L accounts for the balance sheet adjustment.
Here is how to resolve this:
Define a new valuation method in the IMG. You do not have to bother with the detailed settings, important is only that you select the radio button called "Reset" for this new method.
Then go to F.05 and choose the new method. You can restrict the selection to the open items in question only to make it run faster. (If you have a list of those items). This will erase the valuation figures from the items. You have no any other (standard) option to achieve this, no reversal, document change, etc. will help you, only this specific valuation method.
Hope that helps, points welcome
Csaba

How To Reverse Excess Confirmed Quantity in Process Order?

Hi Experts,
Good day!
I have a Process Order with Total Quantity of 68,180 L which currently have a status of TECO CNF DLV PRC BASC BCRQ GMPS MACM*. I made my first partial confirmation with a quantity of 1,000 L for my Finished Good u2013 this is a confirmation with automatic goods receipt. Then I mistakenly made my Final Confirmation for this order with a quantity of 71,125 L for my Finished Good. I only noticed that my last confirmation was incorrect after the Finished Good in Stock has been depleted already. The 101 movement for the Finished Good that was posted during my final confirmation was not reversed anymore when I canceled my confirmation in CORS. I tried to reverse using a 102 movement type for this order in MB31 however it didnu2019t allow me to proceed and gave me an error said u201Cdeficit of .....in Unrestricted useu201D.
Currently my Process Order has a total Delivered Quantity of 72,125 L which is much greater than the required total order quantity of 68,180 L.
Anybody knows how to reverse this excess confirmed quantity? Your response is much appreciated.
Thanks. Have a wondeful day!
Rockz

Hi Rockz,
You mean you made Good Receipt (confirmation) excess 3,945L .
Right now, you want to cancel only 3,945L.
As you said, FG already depleted.
If have no quantity in unrestricted Use, how can we make good movement(102) (because error:u201Cdeficit of .....in Unrestricted useu201D occur when you do TCode MB31 for 102)
If you want to cancel 3,945L, first, you must reverse that Batch of FG 3,945L to Unrestricted use (MMBE to check stock), then you use the TCode MB31 with movement 102 for reverse FG excess, if this finish, quantity in delivery of Process Order will be subtract 3,945L.
(reverse that Batch of FG 3,945L to Unrestricted use ,mean is the Batch of FG which you depleted for somethings like fill to bottle....)
Regard,
DiepNguyen.

How to reverse the VAT for which I have already taken the credit ?

Hi Experts,
In case of outside state sale, I can't take VAT credit on my purchases. In year end I have to reverse the excess VAT amount for which I have already taken the credit. Please tell me how to reverse the credit taken for VAT step by step. Its very urgent.
Warm Regards,
Reva
TCS

HI,
with help of FI consultant you have to pass JV
Regards
Kailas Ugale
Edited by: kailasugale on Feb 17, 2012 3:24 PM

How to reverse clip order in FCP7 timeline?

I'd like to reverse the order of clips in my FCP7 timeline (NOT reversing each individual clip). I want to show some clips on the timeline and then immediatley play the same set of clips in reverse order (not each individual clip in reverse order).
Is there a way to reverse the order of the clips in the FCP7 timeline?
Thanks!

In other words, Meg, you're saying you don't know of any way to do what I'm talking about?
Of course I could manually place them in reverse order, one by one - but that's not what I asked about. I asked how to reverse the order of the clips.
To suggest manually rearranging the order of the clips in reverse would be like if someone asked how to reverse the play direction of one clip, and someone were to reply with a suggestion of rearranging the individual frames, one by one, until reverse playback of the clip were achieved.
Let me try to clarify for anyone else that may read this, to avoid further difficulty understanding what I'm saying....
I want to know how to take a series of clips that are on a timeline (i.e. Clips A, B, C, D, E, F), and get them to be put in the opposite order on the timeline (i.e. Clips F, E, D, C, B, A). I DO NOT WANT to manually rearrange the clips, NOR rearrange copies of the clips, NOR take the Clips from the bin and place them in reverse order on the timeline.
The point to my query is to avoid the time-consuming effort of manually placing clips in reverse order, if there is a way to do this (just like instead of taking a clip and painstakingly copy/paste each frame, one-by-one, in the opposite order of its natural way, you just Modify the Speed to Reverse).
Make sense?

How do I put some kind of parental controls on my ipad 2? My 7 year old daughter just purchased, without my permission, $275 worth of in app purchases in Mall Stars game. Any tips on how to reverse that purchase?

How do I put some kind of parental controls on my ipad 2? My 7 year old daughter just purchased, without my permission, $275 worth of in app purchases in Mall Stars game. Any tips on how to reverse that purchase?

You can also contact itunes support and ask for a refund.
expresslane.apple.com
https://expresslane.apple.com/Issues.action

How to reverse the cancellation invoice?

Dear Experts,
Our user had an invoice document posted through MIRO:
86 GR/IR ACCOUNT     XXXX
50 Stock in Transit        YYYY-
Then reverse the invoice document through MR8M, journal as follow:
96     gr/ir account                    xxxx-
83     exchange rate variance     xxxx-
93     exchange rate variance     xxxx-
40     stock in transit                 yyyy
My question is:
-why exchange rate variance occured in journal cancellation invoice (mr8m)?
My client did'nt want had variance posting; therefore the cancellation invoice journal above
should be reverse.
How to reverse the 'cancellation invoice'?
Kindly advice.
Thank you.

Hi
Please, see SAP Note 46564 - Cancelling/reversing an invoice/credit memo: Posting logic and related notes for a proper understanding of reversing.
I hope this helps you
Regards
Eduardo

How to reverse the cash journal posted entries in FBCJ

Hi All
In Cash journal (FBCJ) user has posted the document by mistakenly two times, is it possible to reverse the cash journal posted document. Please advise how to reverse the posted cash journal entries.
Regards
K.Gunasekar

Hi,
For reversing, select the line and then go to "Edit > Delete Entry (Shift+F2)" or "Delete Row" button at the bottom part of screen. (Deletion function reverse the document in FBCJ)
However in case you are trying to reverse the entry after printing a receipt if you must implement OSS Note 359656 first:-
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=359656]
Regards,
Gaurav

How to reverse the closing period document.

Hi
The entry can be reverse Only in current period
You are trying the reverse the entrie in close period which is not possible .. how to reverse the closing period document.
Thank you

Use t code FB02. Enter required parameters and press enter. From the menu slect Extras - Document header. This will take you to next screen. In this screen from the menu select GoTo Document Header. Change the reversal date and save.
Then reverse the document using normal process. The document will get reversed on the new date entered.
Hope this helps. If useful, please reward points.
Regards
Rakesh Pawaskar

How to reverse the Reconcile Sub Contract Challan.

Dear Expert,
How to reverse the Reconcile sub Contract Chaaln. Our user has been made wrong GR and reconcile the Challan Number aganist same GR Number.After check the Report J1IFR then shown wrong entry.
Please revert to me as soon as possible.

Tried this step.
The mat doc no has been removed from the list (as seen in J1IFR) But the qty is still the same. Even qty has to be reducedto reconcile the correct mat doc
pl help

How to reverse the Batch number which was enter wrongly during GRN posting

Hi Folk,
How to reverse the Batch number which was enter wrongly during GRN posting .
Please revert.
Thank you.

You can either do a transfer posting and move quantity from this batch to another batch e.g. in MB1B with movement 311, or you cancel the entire material document using MBST transaction and redo your receipt correctly.
Then you can flag the wrong batch for deletion in MSC2N.
The batch itself gets deleted physically with the archiving transaction SARA object MM_SPSTOCK

How to reverse AFS MRP

Similar Messages

Maybe you are looking for