How to reverse an entry sheet (ML81N) in SAP?

Hi All,
colud anyone tell me how to reverse an entry sheet (ML81N) in SAP?
Thanks
G.Rossi

Dear
please check this link may help u..
cancel/reverse service entry sheet
regards,
Pravin Kadam

Similar Messages

Dump during creation of service entry sheet (ML81N)

Dump during creation of service entry sheet (ML81N)
Hi,
ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.--> enter (here we get Dump ABAP RUNTIME ERROR "TABLE_INVALID_INDEX").
This is happening only for some POs. What can be the problem?. Is this has something to do with SAP database ???
- rahul

Hi,
it could have the cause that the note 1113220 was missing from your system or that data are inconsistent in your PO.
If you implemented 1113220 and you still get the dump, please check in transaction ST22 the run time error long text to the dump:
Parts:
- How to correct the error?
- Information on where terminated
- Source Code Extract -> if you set a breakpoint before the line where the error occured, you could debug the process.
- Active Calls/Events: if you have an own program displayed here, please check first your program wether it has caused the issue.
If these do not help to find out the problem cause, please open a SAP ticket and include all of the relevant information regarding the dump.
Regards,
Edit

Delete/Cance/Reverse service entry sheet

Hi,
Plz help me out in the issue relating to the service entry sheet, where in i have done the service entry & posted invoice document with respect to the service entry sheet.But now my requirement is to delete/cancel/reverse the service entry sheet b'cos we have booked the service expenditure to the wrong account & now i need to make the rectifications for the same & book to the appropriate account.I have reversed the invoice document with THE TRANSACTION CODE MR8M but iam not able to findout the solution . Plz suggest ....
Regards,
Gangadhar Nalluri
Message was edited by: Gangadhar nalluri

Hi,
Now you can reverse or revoke the service entry sheet using tcode ML81n.here click on display<->change button then you will get one button 'Revoke' in appication tool bar.using this button you can reverse service entry sheet.after this you can also delete SES using delete button.When you revoke the service entry sheet all accounting docuements will also be reserved automatically.
Hope this will helps.
Regards,
sunitha.

Assignment Feild in Service entry sheet - ML81N

Dear All,
We need to add assignment Feild (ZUONR) in Service entry sheet (ML81N).
Can any one suggest the posssible solution.
Thanks & Regards

Hi JKTECH TEAM ,
As a standard process , system is not going to given Assignment field as input field for ML81N. you can use reference or Document header text.
If you required you can use reference or Document header text or you can use user fields.
If you still required you need to maintain customisation through Exits :
INTERFAC            Interface for data transfer
SRVDET              User screen on tab strip of service detail screen
SRVEDIT             Service list control (maintenance/display)
SRVENTRY            Unplanned part of entry sheet (obsolete since Rel. 3.1G)
SRVESI              Data conversion entry sheet interface
SRVESKN             Set account assignment in service line
SRVESLL             Service line checks
SRVESSR             Set entry sheet header data
SRVEUSCR            User screen on entry sheet tabstrip
SRVKNTTP            Setting the account assgnmt category when reading in, if "U"
SRVLIMIT            Limit check
SRVMAIL1            Processing of mail before generation of sheet
SRVMSTLV            Conversion of data during importing of standard service cat.
SRVPOWEB            Purchase order for service entry in Web
SRVQUOT             Service export/import for inquiry/quotations
SRVREL              Changes to comm. structure for release of entry sheet
SRVSEL              Service selection from non-SAP systems
Please choose your choose.Because Assignment field is given for Sorting purpose of any documents

How to block WBS or Network element field in Service Entry Sheet ML81n

Hi Guru
Would like to seek your advise on the following query.
We use Service master to trigger Purchase Order Service related (Item category = D; AAC = P).
Then, user will use T\code ML81n to create service entry sheet by reference to Purchase Order and service master document. During Service entry sheet creation, usually WBS element or Network element field will be populated automatically based on the information from Purchase Order.
However, user could overwrite the WBS element or Network element in service entry sheet. Thus, it creates discrepency WBS\Network element between PO and Entry Sheet.
1. Is there any way we could retrieve Service entry sheet not to allow user to update the WBS\network element field?
2. What will be the impact if we block the field from user.
Please advise

Hi Rag
Thanks for your reply.
When I trace the service master, there is no specify field to input WBS element.
Also, I have checked the service master entered by user, it seems that only the following fields are filled:-
Service Category
BuoM
Mat\Service Group
Valuation class
The rest of field are remained as blank as it might due to multiple WBS element shared 1 same service master
Please advise how I should block the WBS element from service entry to prevent overwriting.
Thanks

Unable to reverse Service entry sheet posted in earlier prds

Hi All,
We are unable to reverse the service Entry sheet created via Shipment cost document. As the Shipment cost document was created in the month ofJanuary 2011. And now that period is closed. But I am looking the way wherein by changing the posting date to current month date. So that system should allow me to reverse the cancellation of service Entry sheet
by ticking the cancellation tick mark under the Settlement Tab.
I need inputs for reversing it in current month. in the similar lines. as we reverse the service entry sheet in ML81N and have an option to change the Posting date. But in VI02, Date Cancellation field is greyed out and we are unable to tried it out.
So basicaly how to change the posting date in shipment cost document, sothat cancellation should happen in date which is being entered by user.
Thanks
Nitin

Hello there,
I had the same problem yesterday and we were able to do the reverse of the ship cost provision and the repost using posting dates from this month. Here is what we did:
For reversing using a different date.
Go to VI02, double click on the position, go to "settlement" tab and select "Cancellation" box, then use the menu bar in the "Item" -"Redet. settlement date option" , you will have an information pop up message "Redet. settlement date not possible - account
already assigned to item" , just hit enter and the "date cancellation" field will be now available to modify. Put the date you desire and save. If you go to the document flow, you will notice the cancellation is done and the posting document is in the FI period you desire.
To repost the same shipment cost with the new date (current period).
Go to VI02, double click on the position, go to "settlement" tab , Hit the button "delete account assigment" and the settlement date field will be available for change. Modify the date, save and leave the transaction.
Enter again and from the menu go to "Item - account assigment", and you will notice the system already redetermine the account assigment, go back (F3) and the "Transfer" field is not available to select and save.
Then you have the new service acceptance posted with the current period.
I spend some time and couldn´t find the answer in other websites, now that i have the answer, I hope this help somebody else,
Rgds,
Sara

Purchase Order: Queries related to Service Entry Sheet (ML81N)

Requirement:
A user exit to be trigger during the changing (update) of service entry sheet, This user exit should have a code which will go and check the credit memo in RSEG- SHKZG where the value is “H” and will check RSEG- LFBNR number with ESSR-LBLNI and compares RSEG- SHKZG with ESSR- NETWR value of the service entry sheet. if the value is less then or more then ESSR- NETWR (service entry sheet) value it should throw an error “"Amount must equal Service Entry”.
If the RSEG- SHKZG value and ESSR- NETWR value are equal it should allow to revoke the service entry sheet.
Scenario: When user clicks on Change button in ML81N for changing the Service Entry Sheet(existing one), an exit should trigger the error message and should not allow to change.
Please suggest how to achieve it, which Exit to use where I should code?

Hi Amol
Why you created Framework Order ?.. You can not change account assignment category in service entry sheet..e.g. K-Cost Center.. F- Order
But depending upon settings, you can change account assignment values such order 1 to order 2
If there are requirement that SES can created for Account assignment F or K. I recommend you to use following approach
1. Create a Contract - ME31K with AAC as U- Unknown (If business already have rates negoiated with vendor for services)
2. Create release order with reference to contract and system will prompt you to enter AAC- it can be K or F
3. Perform SES w.r.t to Release Order.
Other Approach can but not strong one.. create two line items in the PO. one with K and Other with F.. then choose the line item at time of SES creation that business want to book the cost on CC or Order.
Thanks,
Jagdeep

Reverse service entry sheet

Hi,
We are involved in implementing Transportation module for an FMCG client, we were trying to show the reverse cycle to the client.
Service PO has been raised, GR done and service entry sheet generated and has been accepted. Now we want to reverse the whole cycle so we first tried to reverse the GR it gave an error "Transaction code MBST (=> use transaction ML81 / ML85) not defined" so we tried to cancel the service entry sheet first and then the GR.
I tried to cancel the service entry sheet thru ML81 it gave an error "Not possible to delete already accepted entry sheets" then we went to ML81N to revoke the acceptance but when we enter the purchase order and the service entry sheet number it goes into the display mode and the display- change button is greyed out, when we try to go into the set status all the buttons are greyed out.
we have all authorization for our ID.
Can any one of you give a clue.
Regards
Godwin

Hi All,
Thank you for the contribution, i have got the reply from SAP please read below
" hello,
a revoke of the service acceptance created by the shipment cost trans-
fer to FI/CO is not allowed. The only way to cancel this service entry
is cancelling the shipment cost transfer.
To cancel a shipment cost document (SCD) there a two ways:
(1) Start VI02, enter the SCD number and ENTER
(2) Select the transferred item, for which you want to cancel the
transfer
(3) Scoll to the end of data line in the overview screen
(4) Set the flag in column 'Cancel' and press ENTER
(5) Update the cancellation date, if the period (= transfer period) is
closed already
(6) Save the SCD
=> The Transfer of the SCD to FI/CO is canceled now
(1) Start VI02, enter the SCD number and ENTER
(2) Double click on the transferred item, you want to cancel
(3) Select tab strip 'Settlement'
(4) Set the flag in field 'Cancellation' and press ENTER
(5) Update the 'Date canc.', if the period (= transfer period) is
closed already
(6) Save the SCD
=> The Transfer of the SCD to FI/CO is canceled now
In both cases the used Service Entry Sheet (SES) will be deleted, but
the Service Purchase Order will remain, even if the PO was created
automatically by the settlement process of the SCD.
I hope my explanations help you to clarify this issue.
If so, would you be so kind and close/confirm this message? "
Regards
Godwin

How To delete Service Entry Sheet

Dear Experts
How to Delete the Service Entry Sheet , or cancellation ,there is no Material Document generated for that entry.
Actually we have making the Service Entry through ML81n but system does't make Document Nos, directly Entry sheet nos is there.
Rgds
Pankaj Agarwal

Hi Pankaj,
Enter t-code ML81N.
Enter your service entry sheet number.
Than click on change button of header level.
Than click on Revoke acceptance.
and click on save button.
After click on save button. Second time click on change button.
So system display you deletion flag indicator like dust bin.
Than set it(click on deletion flag button) and click on save button.
Regards,
Nani.

Configure service entry sheet ML81N

How to configure field selection for ML81N....
accept data......ref. field for inv. i want to make it mandatory...
plz. help.......
thanks
navin

Hi
Kindly check SPRO , In which MM>External service management
In Service entry sheet
The screen field settings are T code related, check the field settings against the ML81N transaction
currently i dont have sap access ,so i cant able post the exact navigation
Anyway try this
Regards
Amuthan M

Multiple account assignment in service entry sheet (ML81N)

Hi all,
Is there any difference (other than the number of service entry sheet lines) if I create one service line in ML81N using the multiple account assignment screen with 2 different order numbers or 2 SES lines with single account assignment? There is a difference when purchasing materials but I am not sure about services since you accept (post) the entire service entry sheet and not a line item.
Thanks!

Hello Adriana,
If you created an unplanned service PO, did you designate an account assignment on the PO or did you mark with an unknown account assignment? The other question I would have is whether you marked your PO as service based invoice verification? The answer to these questions may help me provide a more accurate response.
From my perspective, the process within the service entry sheet would not matter if you do the one line item versus the two line items. Ultimately the question would be how the AP processor would see the information when they process the invoice through MIRO (e.g. will they see one line or two). If you are not using service based invoice verification, then the two options you should provide the same result (e.g. one line item on the MIRO screen).
Hope this helps.

How to cancel service entry sheet

Dear all ,
Pl explain the process for how to cancel the service entry sheet ?
Regards

Hi,
Go to Tcode ML81 , enter the concerned Service Entry sheet No
Then Revoke acceptance of service entry sheet (If it is accepted).
Then save it.
Then again enter same service entry sheet no in ML81 & delete it.
hope it helps
Regards,
Rahul

Exit while releaseing Service Entry Sheet ML81N or event

Hi,
Any exits/ events while releasing a Service Entry sheet?
Thanks,
Krishna.

hi,
Check the User Exits for ML81N
Exit Name           Description
INTERFAC            Interface for data transfer
SRVDET              User screen on tab strip of service detail screen
SRVEDIT             Service list control (maintenance/display)
SRVENTRY            Unplanned part of entry sheet (obsolete since Rel. 3.1G)
SRVESI              Data conversion entry sheet interface
SRVESKN             Set account assignment in service line
SRVESLL             Service line checks
SRVESSR             Set entry sheet header data
SRVEUSCR            User screen on entry sheet tabstrip
SRVKNTTP            Setting the account assgnmt category when reading in, if "U"
SRVLIMIT            Limit check
SRVMAIL1            Processing of mail before generation of sheet
SRVMSTLV            Conversion of data during importing of standard service cat.
SRVPOWEB            Purchase order for service entry in Web
SRVQUOT             Service export/import for inquiry/quotations
SRVREL              Changes to comm. structure for release of entry sheet
SRVSEL              Service selection from non-SAP systems
SRV_FRM             SRV: Formula calculation (obsolete since 4.0A!)

Error message SE508 while create Service Entry Sheet (ML81N)

Hi,
In client production system we are facing problem of getting error message SE508: Error in account coding allocation just after we click "adopt services"tab while creating service entry sheet (with respect to PO)Tcode ML81N.Please analyse the problem and give us solution as why it is happening? Please look at error screen shot with steps followed (in attachment) for your reference.
ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.> click "adopt services"> here we get error message "SE508":ERROR IN ACCOUNT CODING ALLOCATION
Regards
Rahul Shukla

Hi,
I would suggest you to check the note 1087090 first.
Further I would like to recommend you to deactivate the exit EXIT_SAPLMLSK_001 in case it is active in
your system.
If the note 1087090 doesn't apply, please check the services data in the tables ESKL and ESLL. If PO services data have been deleted in the corresponding PO item, please check all of the deletion indicators in ESKL and ESLL. There must be an inconsistency. For example: the field 'LOEKZ' has been set in the table ESKL for the PO item, but it does not reflect in the table ESLL.
In table ESLL, there is no logical or physical deletion but the
services in the table ESKL has been marked (i.e logically deleted) -> this could be the reason for the error message SE508. For this case please open a SAP ticket to get help with the correction of the inconsistency.
Regards,
Edit

URGENT VERY URGENT---------Error in Service Entry Sheet-ML81N

Dear Experts,
I am getting a Error msg while creating a Service Entry Sheet by ML81N. It says that " You cannot enter an Unplanned Order". wht to do pls help
Its urgent
Thnx
Sankha.

yes u have to make the serv entry sheet with rspt to Serv. P.O just go to ML81N here click on create icon, a small box opens here give the p.o no & click on continue.here give all necessary details like desc, valid dates , serv, location, etc then click on serv. sel tab which is at below then all line item which r in Serv. p.o will be picked up.
Hope this can help
Reward if useful,
KM

How to reverse an entry sheet (ML81N) in SAP?

Similar Messages

Maybe you are looking for