How to reverse menu or function exclusions for a system defined responsibility like System Administrator??

Hi Experts,
One of our students have excluded the responsibility define function and user define function from the "System Administrator" responsibility in our test instance, which resulted in disabling of responsibility creation and user creation form. Can anyone here explain how to resolve this issue??
Thanks.

Your DBA should be able to help you..........

Similar Messages

How to config Check Digits function module for Student Number Validation

Hi SLCM Experts,
In the SAP-SLCM, How to use check digits function module for validate student number. Just only config it or need to customizing program.
*Any idea to student number validation in SLCM?*
Best Regards,
Suvatchai K.

Hi ,
Can you expalin it further ?
You configure the St. no in piq_matr . And set it as external or internal no. range which suits your business .
What is the validation you are looking for ?
Regards
Gajalakshmi

How to find suitable( existing) function group for a Function Module ?

How to find suitable( existing) function group for a Function Module to be created?
This is FM for converting amounts to text.

Hi,
If you are not sure into which Function group your FM should go in then its advised to create a Function group of your own. Its not advised to create a function module in any other function group unless its owned by you since your FM can get deleted by others or it can get changed.
Create your own Function group. But if you want to create in an existing FG then best way is to find out the Function Group by searching for suitable existing Function module then see their function group
Regards,
Sesh

How to create the INBOUND Function Module for INBOUND IDOCs

Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
Ganesh

Hello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe

How to create new logical function codes for Subtype

Hi all
I'm developing an WF that must be started when the user makes any change in a employee position. The problem is that this change can be made by many transactions, I know that it´s possible to do it by PA30/PA40, and today it´s made here using PP01. The Functional Consultant said to me that the better way to map all possible trasactions which made that kind of changes in an employee data is by adding new "Logical Funcion codes" (or Activities) for our specif subinfotypes.
The table that contains such information is T77FLC. How can I add that new activities for a subinfotype, by a costumizing or just adding new entries in this table?
Thanks in Advance

Josie,
You can configure your own workflow events based on HR objects/infotypes/subtypes/update type/activity type combinations using transaction SWEHR3. Look at SWEHR2 for the standard events to get some idea of what you need to enter in SWEHR3.
The relationship between the infotype and the matching business object type is held in SWEHR1.
Regards,
Jocelyn

How to create new logical function codes for Subinfotype

Hi all
I'm developing an WF that must be started when the user makes any change in a employee position. The problem is that this change can be made by many transactions, I know that it´s possible to do it by PA30/PA40, and today it´s made here using PP01. The Functional Consultant said to me that the better way to map all possible trasactions which made that kind of changes in an employee data is by adding new "Logical Funcion codes" (or Activities) for our specif subinfotypes.
The table that contains such information is T77FLC. How can I add that new activities for a subinfotype, by a costumizing or just adding new entries in this table?
Thanks in Advance

Josie,
You can configure your own workflow events based on HR objects/infotypes/subtypes/update type/activity type combinations using transaction SWEHR3. Look at SWEHR2 for the standard events to get some idea of what you need to enter in SWEHR3.
The relationship between the infotype and the matching business object type is held in SWEHR1.
Regards,
Jocelyn

How to create a Z Function module for the standard FM VIEW_KURGV?

Hi all,
There is a requirement to the change the functionality of the standard FM VIEW_KURGV. This FM is being used in a Z report. Hence, I have a copied this FM to a Z FM ZVIEW_KURGV after having created the Z Function Group ZV05E. However, there are a number of standard routines which are present in the standard FM VIEW_KURGV which need to be also created in the Z FM ZVIEW_KURGV. Please advise how to proceed.
Thanks and regards,
Anishur

Instead of copyg the std fm to z, do the following,
1. Go to se37 open FM VIEW_KURGV in display mode.
2. Click on the spiral icon on the top.
3. Then in menu go edit->enhancment options -> show implicit enhancement
4. """""""""""""""""""""" kind of lines will appear in the cde, just rt click on the line at the place u want to insert the code and select
enhancement implementation create.
5. Give apropriate name for thi , it will inset a n place to write your code.
This is an std sap methodology and is supported in upgradde also.

How to use Call library function node for a function in dll with VOID data type

Hi All,
I would like to ask for your kind help,
I am facing an issue with the call library node.
I have a C++ function(stdcall), which has void as data type
error code XXXX(hwnd, lID, getValue, *void data1, *void data2)
the data1 and data2 types are always changing depending upoin the value of "getValue".
Primarily i can use call library node multiple times and adapt each node according to the data types of data1 and data2, and extract the values and use in the code. Here is no issue. Real question is:
My question:
How can i just use one time call library node and make a case depending upon the "getvalue", which will control the data type of data1 and data2. Here i really looking for solutions.
My trials:
i used varaints as input to the call libray node for data1 and data2, and selected Parameters in call libraby node as " Adapt to type". here labview just crashed.
i really appreciate your feedbackand suggestions.
Thanks
Kutbuddin
Solved!
Go to Solution.
Attachments:
Clipboard02.jpg ‏103 KB

A variant is a very specific LabVIEW datatype (really a C++ type object internally) and trying to pass that to a function, which excepts a flat memory pointer there, for sure will crash very quickly.
As to endianess, yes Unflatten will be able to adjust for endianess, which in this case however is most likely exectly NOT what you want. So make sure that the you select native type for the endianess input on Unflatten from String. LabVIEW internally works with whatever is the native endianess, as will most likely your C++ DLL. The platform independent big endian format does only come into play when you receive data streams over some streaming interface like a network connection. Here it is desirable to use an endian format that is independent from the actual platform that generates and consumes the data stream. LabVIEWs default endianes is big endian here.
But as long as you pass data directly to native components like DLLs there is no difference in endianess between what LabVIEW uses and what those components use.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to debug outbound Idoc function module for invoice

I have to debug the outbound IDOC function module and UserExit for invoice message type INVOIC, process code SD09, function module is IDOC_OUTPUT_INVOIC and user exit for the function module LVEDF001.
I tried putting the break point in function module IDOC_OUTPUT_INVOIC and recreate the IDOC using WE19 but it creates the idoc but does not stop at the break point. I have also tried generation of idoc through VF02. It again creates the idoc but does not stop at the function module.
Please let me know if I am missing any thing and not doing it right.
Appreciate your help.
Rohit

Hi Ali,
I faced the same problem. Thing is the break point is not getting triggered when i ran tha IDOC through WE19.
What i have done is i created a project for my exit in CMOD and kept some junk code in the exit and executed it through BD21. Then the Break point got triggered. See if it works.
Regards,
Uday S.

How to generic menu roles functionality dynamically

right now i am using oracle built in menu roles, as we are not systematic the roles, every day we are adding - removing different screens form the diff users etc, it became difficult with menu roles. and Programmer presence is needed to change Menu roles very oftenly. already im having 50+ menu roles in my application, as i read in tech docs it is not advisable to increase menu roles toomany.
But i would like to wants that things as programatically.. by keeping all the menu names,usernames in tables and assign to users when ever we need manually, as it is replicating Oracle Menu roles default functionality.
is there any body can help/ advise on this issue. any work around please...
thx regads subbarao..

right now i am using oracle built in menu roles, as we are not systematic the roles, every day we are adding - removing different screens form the diff users etc, it became difficult with menu roles. and Programmer presence is needed to change Menu roles very oftenly. already im having 50+ menu roles in my application, as i read in tech docs it is not advisable to increase menu roles toomany.
But i would like to wants that things as programatically.. by keeping all the menu names,usernames in tables and assign to users when ever we need manually, as it is replicating Oracle Menu roles default functionality.
is there any body can help/ advise on this issue. any work around please...
thx regads subbarao..

How to set up to get email for more than one address like you can on ipad?

I have several addresses set up on i devices and get mail from all. Can I set up all addresses on thunderbird the same way and if yes how? Community help site seems to have answers but when I tap on the answers I get nothing. It does not connect to answers.

From the Menu Bar select '''File-New-Existing Mail Account'''
No Menu Bar showing? Press the alt key.
From the '''AppMenu '''button click the button (square with 3 lines)
select '''New Message-Existing Mail Account'''

How do I get the Function bar to appear in my responsive layout?

Running 11.0.3.268, with the latest hotfix.
When I customize my layout, I see options for a Function bar. (Home button, Print button, Back and Next buttons, etc.) When I generate my output, however, I do not see any of these items. What do I need to do to make these button appear?

Thank you. Apparently my screen resolution was too low for the Function bar to display.
Is it possible to adjust screen dimension break points for the Responsive HTML5 Help layouts? I see the Screen Profiles on the Project Set-up tab, but they seem to be only for Multiscreen HTML5 output.

How to do configuration in Integration Builder for Idoc to PI to EDI system?

Hi Experts.
I am working on one interface which is SAP IDOC (DESADV.DELVRY03) >> to>> PI >> to>> EDI system.
I am done with all ESR objects,
Can anyone help me about how to and what configuration required to be done in Integration Builder?
And after configuration how should I test/check my interface?
Please give your suggestions.
Any suggestion will be rewarded.
Thanks in advance.
Regards,
Dipen.

Hi Dipen,
Configuration:
SAP ECC
You have to configure the Output types in NACE and Partner Profile in WE20 properly.
SAP PI
In PI, You have to configure the port in IDX1 and load the meta-data in IDX2.
Testing:
While on saving the Delivery document, IDoc would be triggered and it would be routed to PI based on the port that you have configured in the partner profile.
You can check the status of the IDoc in WE02/WE05. Check the tRFC queue in SM58 whether the IDoc is struck in ECC due to any communication issues.
In PI, you can check whether the IDoc is received or not in the transaction IDX5. If you double-click on the message, it would be routed to the message monitoring.
The status of the message in the receiver side can be checked in the communication channel monitoring.
You can let me know if you need any more info.
Thanks,
Kanda

How to create ENQUEUE function module for s567 table

Hi Experts,
Anyone Plz tell the steps how to create a ENQUEUE function module for the table s567.
Its somewht urgent, plz help me.
<REMOVED BY MODERATOR>
Mohana
Edited by: Alvaro Tejada Galindo on Mar 10, 2008 4:21 PM

Hi,
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
Hope this will give a basic idea.
Regards
Sudheer

How to Create Menu Exit

Hi,
Please tell me steps for how to create Menu Exit. Please Help me

MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
There are 'only' 177 Menu exits in standard - I couldn't see the right one, too.
But you could search the implemented exits, this should be only a small number. Go to transaction CMOD, enter * and F4, information system (F5), show all selections (Shift+F7) and then you can restrict to search only menu exits.
Of course there is the possibility, that these are added in a different way...
... at least you can be sure, if it's a normal menu exit.
Check this sap help..
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.sapbrainsonline.com/TUTORIALS/default.html
You can achieve this functionality by configuring in IMG.
Please find the info regarding User-Exit's in the following links:
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
Re: doubt on user exits
user exits and Badis
User exits is the enhancements provided by SAP
You can use them in transactions. Each transaction will have user exits.
If you want to use your own requirements by making your coding while the transaction is run you can use user exits.
For example if you want to run the MRP in MD02 specific to MRP controller you can user exit.
Please also refer the document below.
USEREXIT
Userxits allow us to add our own functionality to SAP standard program
without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
All Userexits start with the word USEREXIT_...
FORM USEREXIT_..
z..
ENDFORM.
The problem lies in finding the correct userexit and how to find it if one exists for the purpose. Once the correct userexit is found the necessary customer code is inserted in the customer include starting with the z.. in the form routine.
e.g. USEREXIT_SAVE_DOCUMENT_PREPARE
Certain application like SD still provide this form of enhancement using userexit but this practice is no longer being followed for newer extensions instead they are using EXITs which come bundeled in enhancement packages . Neverthiless existing USEREXITS will be supported by SAP an all the newer versions of SAP.
HOW TO FIND USEREXITS
Userexits can be found in number of ways:
1) To find userexits in SD module , goto object navigator(SE80) and select
development class from the list and enter VMOD in it. All of the userexits in SD are contained in the development class VMOD. Press enter and you will find all the includes which contain userexits in SD for different functions like PRICING, ORDER PROCESSING etc. Select the userexit according to the requirement and read the comment inserted in it and start coding .
Some examples of userexits in SD(SALES & DISTRIBUTION ) are:
1)ADDING OF NEW FIELDS IN PRICING
In Pricing in SD the fields on the basis of which pricing is done are derived from the FIELD CATALOG which is a structure KOMG .This structure is used to transfer transaction data to the pricing procedure in SD and is also known as communication structure.This structure KOMG consists of two tables KOMK for Header related fields and KOMP for item related fields. The fields which are not in either of the two tables KOMK and KOMP cannot be used in pricing .Sometimes a need arises when the pricing is to be based on some other criteria which is not present in the form of fields in either of the two tables. This problem can be solved by using USEREXITS which are provided for pricing in SD. Pricing takes place both when the SALES ORDER ( Transaction VA01) is created as well as when INVOICING ( Transaction VF01) is done.Hence SAP provides 2 userexits ,one for sales order processing which is
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
Depending upon which table (KOMK or KOMP) the new fields were inserted we use either of the above two userexits.These userexits are found in include MV45AFZZ of the standard SAP sales order creation program SAPMV45A.
In the case of userexit which will be called when invoicing is done ,these
are provided in the include RY60AFZZ which is in the standard SAP program SAPMV45A. The name of the userexits are same. i.e
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
These userexits are used for passing the data from the communication structure to the pricing procedure, for this we have to fill the newely created field in the communication structure KOMG for this we fill the code in the above userexit using the MOVE statement after the data that has to be passed is taken from the database table by using the SELECT statement. The actual structure which is visible in these userexits and which is to be filled for that particular field is TKOMP or TKOMK.
Before the coding for these userexits is done ,it is necessary to create a new field in either of the two tables KOMK or KOMP .For this purpose includes are provided in each of them .
To create the field in header data(KOMK) the include provided is KOMKAZ
and to create the field in item data(KOMP) the include provided is KOMPAZ.
One possible example for the need of creating new fields can be e.g. Frieght to be based upon transportation zone ,for this no field is available in field catalog and hence it can be created in KOMK and then above userexits can be used to fill the transportation data to it.
2)The other method of finding userexit is to find the word USEREXIT in the
associated program of the transaction for which we want to determine userexit using SE38.
3)The other method of finding userexits is to find the include in case of SD/MM applications where the userexits are located ,this can be found in the SAP reference IMG generally in the subfolder under SYSTEM MODIFICATION.
Some other examples of userexits in SD are:
USEREXIT_NUMBER_RANGE
This userexit is used to assign a different internal document number to the
sales order(VA01) when it is created depending on some criteria like a different SALES ORGANIZAION(VKORG) .
USEREXIT_SAVE_DOCUMENT_PREPARE
This userexit is used to insert the ABAP code which will be called when
the document (sales order VA01) is just about to be saved.This userexit is used generally for custom checks on different fields , to display some information before the order will be saved or for making changes to certain fields before the sales order will be saved.
Exits & Enhancements
There are mainly six types of EXITs in sap which have been collected in the form of enhancement packages and attached to standard code in SAP.
These are different from USEREXIT in the way that they are implemented
in the form of FUNCTIONs while in USEREXITS we use form routines for their implementation. These are also sometimes known as function exits .
These start from the word EXIT_ followed by the program name and then followed by a three digit number.
e.g. EXIT_SAPMV45A_002
This exit is found in SD in enhancement V45A0002.
TYPES OF EXITS
1)MENU EXITS
2)FUNCTION EXITS
3)TABLE EXITS
4)SCREEN EXITS
5)KEYWORD EXITS
6)FIELD EXITS
We use SAP transactions CMOD and SMOD to manage exits. Before implementing an exit , it is required to create the project by using CMOD
selecting the enhancement e.g. V45A0002 and selecting the component
(one which fulfills our need) i.e the exit which will be implemented in SMOD and after coding has been done the project has to be activated.
An exit can be coded only once.
FUNCTION EXITS
These are used to add functionality through ABAP code . These start from the word EXIT_programname_NNN ending in a 3 digit number. No access code is required to implement any tupe of exit including function exits.
The function exits are called from the standard SAP program in the form
of ABAP statement
CALL CUSTOMER-FUNCTION 'NNN'
This is in contrast to USEREXITs where PERFORM statement is used to call
the required userexit.
To implement the FUNCTION EXITs first of all the project is created and a suitable enhancement package is selected and from its compnents the function exit to be implemented is selected and on double clicking it the exit code will appear in ABAP EDITOR(se38) where a Z include will be found and the customer code should be entered in this include.
e.g.
ADDING A DEFAULT SOLD-TO-PARTY in Sales Order Creation
To show a default sold-to-party in this field when the user creates a sales order (VA01) we can use a function exit .This function exit is located in enhancement no V45A0002 . Before we can choose the exit we have to create a project in CMOD after that enter V45A0002 in the enhancement field and click on the components . In the components you will see the exit EXIT_SAPMV45A_002 . This exit is used for our purpose.
Double clicking on this exit will takes us to function builder (SE37) . This
function exit has one exporting parameters and two importing parameters, we are interested in exporting parameter which is E_KUNNR of type KNA1-KUNNR i.e if we move the desired customer name to this structure(E_KUNNR) it will be shown in the field as the default value when we create the sales order. This function also contains a customer include ZXVVA04 . This include will be used to write our custom code .
Double clicking on this include and it will prompt us that this include does not exists do you want to create this object ,select yes and the include will be created .In this include we can write our own code that will fill the field E_KUNNR.
e.g. E_KUNNR = 301.
Activate the include and Activate the project. Now when ever the SALES ORDER will be created , sold-to-party field will come up with a predefined customer .
FIELD EXITS
The field exits are managed,created,activated through program RSMODPRF. The field exit is associated with a data element existing in ABAP dictionary and hence to the screen field using that data element.
The format of field exit is :
FIELD_EXIT_dataelement_A-Z or 0-9
If a particular screen and program name is not specified than the field exit will effect all the screens containing that data element.
The function module associated with field exit shows two parameters
INPUT and OUTPUT. Input parameter contains the data passed to the field exit when the field exit was invoked by the R/3 , We can write our own code to change the output parameter depending upon our requirements.
Before the field exit can have any effect the system profile parameter
ABAP/FIELDEXIT in all the application servers should be set to YES
ABAP/FIELDEXIT = YES.
Reward points Please ...

How to reverse menu or function exclusions for a system defined responsibility like System Administrator??

Similar Messages

Maybe you are looking for