How to reverse the auto levels recording to normal levels?

Hi!
What I want to say is that I have a recording taken with Zoom H1 and the Auto Levels switch was accidentally on. That of course makes the parts of the recording after a pause to start too loud and then when the signal goes to high, makes it too quiet. It's not nice.
Is there a way to level out the recording? It's a speech and I know that it can be done using Speech volume leveler, but I don't want to use that either. What I am interested in is that is there a way to capture a noise print or the print of desired level of audio and then level out the rest of the audio by referencing to the print volume? In other words, reverse the Auto Levels effect back to normal. Is that possible?
Thanks!

Srivas 108 wrote:
I tried Speech Volume Leveler and the thing that I don't like in my particular situation is that it boosts the quieter signals up to the level of louder ones and that means also boosting noise. It would be nice to do the other way around, that is attenuate the louder signals to match the quieter ones. Is that possible to do with Dynamics Processing? How to do it?
Which version of Audition are you using? There are Advanced options on later versions that allow you to keep the noise down.
But what you are looking foe in Dynamics Processing is the Downward Expander. As an example look for instance at the E. Guitar Gate preset. It is a rather extreme version of what you want to do but gives you some idea where to start.

Similar Messages

How to Maintain the Pricing Condition Records in CRM

Hi
I am new to the CRM
How to maintain the pricing condition records in crm for the particular condition type?
as we do in SD(VK11)
Thanks

Hi Binu,
First of all, you could maintain pricing conditions in the following places:
1. In General Condition Maintenance (GCM)
2. At the product maintenance level
3. At the 'Price agreement' tab of Contracts
4. As manual conditions during order processing at item level
Now, if you want to maintain conditions using GCM, you first have to maintain a condition maintenance group in the customizing where in you can assign condition table and condition type for different counter values. I am assuming that you have done this activity successfully.
When you run the transaction '/SAPCND/GCM', for application 'CRM', your condition maintenance group name and context 'GCM', you will be initially taken to a screen where in you'll have an item area which would be blank and then condition fields would be displayed in a tree on the left.
Here, select the field 'Condition type' and click on icon 'Select records'. You would get a dialog prompting you to enter condition type. Here you can specifiy the condition type for which you want to maintain/view condition records.
If no condition records are available, item area would be left blank. Here, you can choose a condition type using the standard F4 help. Depending on condition types that are assigned to condition maintenance group, different condition types would be displayed in the F4-help using which you can maintain condition records.
Hope this helps.
Regards,
Pavithra
**PS: Please reward points if this helps.

How to change the text under RECORD WORKING TIME IN ESS.

Hi,
How to change the text under RECORD WORKING TIME in ESS.
Is there any setting at page or iview level?
Please help me.
Regards,
Thirun.

Hi,
If it is standard business package ,then check home page framework
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4
Regards
Koti Reddy

How to update a auto increment record

Hi all,
I just figured out a way to insert auto increment record, but there is still one problem to solve which is how to do the update of the auto increment record, because after I get the db record, I don't know if there is a way to get the associated sequence key with the record, I can't do the record update without knowing the primary key, ie the associated sequence key.
Can you point me to a way to do updating?
Regards,
-Bruce

You learn how to use JDBC.
And then you learn how to use the SQL update statement.
If you search in this forum for 'update' you will find examples.

How to find the number of records per months in cube

Hi,
how to find the number of records per months for my all cubes?
Can i use the ListCube transaction to find totl number f records per cube monthwise ?
Jimmy

Hi,
Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
1.Copy the code into your Z<programname> from Se38.
2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
3.Save program.
4.Schedule the program in background as required
5.Create cube with infoobjects to hold no of records and Infoprovider name
6.Load this cube based on event after the program job is done.
Hence you can report on this cube to see no of records in CUBE or ODS in your box.
Please find the code below.
Cheers,
Kavitha Kamesh.
types: begin of itabs ,
      tabname type dd02l-tabname,
      end of itabs.
data: itab type itabs occurs 0 with header line.
data: counter type i.
data: begin of itab1 occurs 0,
tabname type dd02l-tabname,
counter type i,
end of itab1.
DATA: ITABTABNAME TYPE STRING.
DATA: LENGTH TYPE I.
DATA: OBJECT(30).
data: str(6) type c.
select tabname from dd02l into table itab where ( tabname LIKE '/BIC/F%' or tabname LIKE '/BIC/A%00' )
and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
loop at itab.
select count(*) from (itab-tabname) into counter.
str = itab-tabname.
if str = '/BIC/F'.
LENGTH = STRLEN( ITAB-TABNAME ).
SHIFT itab-tabname BY 6 PLACES LEFT.
ELSEIf str = '/BIC/A'.
SHIFT itab-tabname BY 6 PLACES LEFT.
LENGTH = STRLEN( ITAB-TABNAME ).
LENGTH = LENGTH - 2.
endif.
itab1-tabname = itab-tabname(LENGTH).
append itab1.
itab1-counter = counter.
clear itab-tabname.
clear: COUNTER.
endloop.
*********** itab1
loop at itab1.
write:/ itab1-tabname, itab1-counter.
endloop.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                    =
    FILENAME                        = 'c:records.xls'
    FILETYPE                        = 'ASC'
*   APPEND                          = ' '
    WRITE_FIELD_SEPARATOR           = ','
*   HEADER                          = '00'
*   TRUNC_TRAILING_BLANKS           = ' '
*   WRITE_LF                        = 'X'
*   COL_SELECT                      = ' '
*   COL_SELECT_MASK                 = ' '
*   DAT_MODE                        = ' '
*   CONFIRM_OVERWRITE               = ' '
*   NO_AUTH_CHECK                   = ' '
*   CODEPAGE                        = ' '
*   IGNORE_CERR                     = ABAP_TRUE
*   REPLACEMENT                     = '#'
*   WRITE_BOM                       = ' '
*   TRUNC_TRAILING_BLANKS_EOL       = 'X'
*   WK1_N_FORMAT                    = ' '
*   WK1_N_SIZE                      = ' '
*   WK1_T_FORMAT                    = ' '
*   WK1_T_SIZE                      = ' '
* IMPORTING
*   FILELENGTH                      =
TABLES
    DATA_TAB                        = itab1
*   FIELDNAMES                      =
* EXCEPTIONS
*   FILE_WRITE_ERROR                = 1
*   NO_BATCH                        = 2
*   GUI_REFUSE_FILETRANSFER         = 3
*   INVALID_TYPE                    = 4
*   NO_AUTHORITY                    = 5
*   UNKNOWN_ERROR                   = 6
*   HEADER_NOT_ALLOWED              = 7
*   SEPARATOR_NOT_ALLOWED           = 8
*   FILESIZE_NOT_ALLOWED            = 9
*   HEADER_TOO_LONG                 = 10
*   DP_ERROR_CREATE                 = 11
*   DP_ERROR_SEND                   = 12
*   DP_ERROR_WRITE                  = 13
*   UNKNOWN_DP_ERROR                = 14
*   ACCESS_DENIED                   = 15
*   DP_OUT_OF_MEMORY                = 16
*   DISK_FULL                       = 17
*   DP_TIMEOUT                      = 18
*   FILE_NOT_FOUND                  = 19
*   DATAPROVIDER_EXCEPTION          = 20
*   CONTROL_FLUSH_ERROR             = 21
*   OTHERS                          = 22
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to find the number of records in ods?

how to find the number of records in ods?
Pls suggest the solution apart going to the table of ods and seeing the number of records.
Is there any program or function module to see the number of records in ods?
For eg: SAP_INFOCUBE_DESIGNS is a program which gives the detail (number of records) of infocube.

Hi,
I was looking at this and found the following tables that may be of help.
One of these tables will include a summary of the record count of all the tables in your system based on the last time each table had it's database statistics calculated:
DBSTATTADA
DBSTATTDB2
DBSTATTDB4
DBSTATTDB6
DBSTATTINF
DBSTATTMSS
DBSTATTORA
We run on an Oracle database so the table record counts can be taken from DBSTATTORA. Type in AZ in table selection field in SE16 to restrict the output to ODS (or DSO) tables only.
The record count is at the time indicated in the timestamp field. Obviously this is not real time but should not be too out of date - if it is you may be having performance issues and should get your DBA / Basis to run a full refresh of DB stats.
Hope this helps, alhtough not real time the table should give you a decent indication of the size of all your ODS objects (or any other table for that matter!)

I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I paid for apps, i demand my updates

I did not authorize 2 in app purchases and because my credit card is at its limit, and i dont know how to reverse the in app purchases, i cannot update any app or do just about anything in the appstore or itunes store. I dont care if i owe apple's itunes appstore a few dollars over 2 in app purchases i never meant to download in fact the whole app itself i wanted to delete...but out of the hundreds (maybe lower thousands) fof dollars in music and apps and whatever else, that i rightfully purchased over the passed couple of years....should *NOT* have the upgrades and/or previous purchased songs withheld from me over $3 in accidently purchased add ons through an existing app i deleted an disliked anyway

Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"

How to set the number of records displayed at run time

Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

Bookmark Go to End
goal: How to vary the number of records displayed in a block
programmatically
fact: Oracle Forms Developer
fix:
Block property 'Number of Records Displayed' can not be changed during runtime
using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
the visual appearance of the form so that it creates effect of changing this
property. To achieve such an effect follow these steps:
1. in Forms Builder, in the multirecord block define the new set of items.
The simplest way is to copy/paste the original item and rename created item.
2. set properties of these new items so that they are the same as the properties
of the original items. If these new items were copied from original items
then properties are already the same. Modify following properties
'Database item' on new items to value 'No'
'Synchronize with item' to the value of the original item
'Number of Items Displayed' to desired value.
'Visible' to 'No'
In other words, these new items are mirrors of original items.
3. code event, which is meant to trigger the change in block appearance.
This code should use SET_ITEM_PROPERTY built-in to set properties
like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
to desired value for items which are about to be displayed, then
move cursor to one of these just displayed items with GO_ITEM built-in
and then hide the previously displayed items.
Example:
Assume that the block is built on SCOTT.DEPT schema. Following will
change the set of displayed items
set_item_property('dept.mdeptno',visible,property_true);
set_item_property('dept.mdname',visible,property_true);
set_item_property('dept.mloc',visible,property_true);
set_item_property('dept.mdeptno',enabled,property_true);
set_item_property('dept.mdname',enabled,property_true);
set_item_property('dept.mloc',enabled,property_true);
set_item_property('dept.mdeptno',update_allowed,property_true);
set_item_property('dept.mdname',update_allowed,property_true);
set_item_property('dept.mloc',update_allowed,property_true);
set_item_property('dept.mdeptno',navigable,property_true);
set_item_property('dept.mdname',navigable,property_true);
set_item_property('dept.mloc',navigable,property_true);
go_item('dept.mdeptno');
set_item_property('dept.deptno',visible,property_false);
set_item_property('dept.dname',visible,property_false);
set_item_property('dept.loc',visible,property_false);
Regards,
Monica

How to stop the auto updater in N900 application m...

Hey guys,
Anyone know how to stop the auto updater in N900 application manager ?
Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
So got any ideas for this prob...?
(I usually use faster app manager to install apps.)
Click the star if this helps you (",)
If this is your answer, please do not forget to click "Accept as solution" (",)

virajx3006 wrote:
Hey guys,
Anyone know how to stop the auto updater in N900 application manager ?
Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
So got any ideas for this prob...?
(I usually use faster app manager to install apps.)
dude check your inbox
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

How to stop the pdf reading record?

How to stop the pdf reading record? I don't want my track record to be leave on the computer.

Exactly what face reading program are you talking about? Did you download and install it?
Also, please furnish relevant information: Mac model/year.

How to stop the auto change of the desktop background picture ?

How to stop the auto change of the desktop background picture ?

Well . . thanks, but I already have done that and I still have the problem. The background changes to the standard picture galaxy not to one of the options. Sorry my question wasn't clear enough.
Thanks.

How to know the count of record in CR XI?

Post Author: Liu ming
CA Forum: Deployment
Hi All,
I create a report by CR XI release 2. The report is viewed in ASP.Net. So, I would like show a message when the report have no record. My question is how to know the count of record?
Thanks.

I was able to do this by using
ora:countNodes('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500')

How to change the source level in java Studio creator

Hi,
I am using Sun Java Studio Creator 2 Update 1 IDE, in this IDE how to change the source level to 1.5 for an existing project.
Thanks in advance,
Rajesh.

Hi!
Unfortunately Sun Java Studio Creator 2 Update 1 doesn't support 1.5 source level. But You can try to download NetBeans IDE (from http://www.netbeans.org) and there with Visual Web project You will find the same functionality as for Creator. And 1.5 source level is supported by NetBeans.
Thanks,
Roman.

How to reverse the VAT for which I have already taken the credit ?

Hi Experts,
In case of outside state sale, I can't take VAT credit on my purchases. In year end I have to reverse the excess VAT amount for which I have already taken the credit. Please tell me how to reverse the credit taken for VAT step by step. Its very urgent.
Warm Regards,
Reva
TCS

HI,
with help of FI consultant you have to pass JV
Regards
Kailas Ugale
Edited by: kailasugale on Feb 17, 2012 3:24 PM

How to reverse the cancellation invoice?

Dear Experts,
Our user had an invoice document posted through MIRO:
86 GR/IR ACCOUNT     XXXX
50 Stock in Transit        YYYY-
Then reverse the invoice document through MR8M, journal as follow:
96     gr/ir account                    xxxx-
83     exchange rate variance     xxxx-
93     exchange rate variance     xxxx-
40     stock in transit                 yyyy
My question is:
-why exchange rate variance occured in journal cancellation invoice (mr8m)?
My client did'nt want had variance posting; therefore the cancellation invoice journal above
should be reverse.
How to reverse the 'cancellation invoice'?
Kindly advice.
Thank you.

Hi
Please, see SAP Note 46564 - Cancelling/reversing an invoice/credit memo: Posting logic and related notes for a proper understanding of reversing.
I hope this helps you
Regards
Eduardo

How to reverse the auto levels recording to normal levels?

Similar Messages

Maybe you are looking for