How to revert back to mac os 10.6

how do I revert back to MAC OS 10.6 from 10.8?

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

Similar Messages

How to revert back previous working files in InDesign CS6?

I have suddenly replace wrong working files, how to revert back previous working files in InDesign CS 6?
OS Mac version: 10.10.3
InDesign CS6 version

This feature does not exist in InDesign. You're best hope is that you have a backup of the previous file. Moving forward, you might want to try a free product called Radish that allows you to save versions and revert back to previous versions when needed. Here's a blog post I wrote about the product Story Versioning in InCopy | InCopySecrets.

HT3258 can I revert back to mac os 10.6 after upgrading to 10.8?

can I revert back to mac os 10.6 after upgrading to 10.8?

riocruzan wrote:
can I revert back to mac os 10.6 after upgrading to 10.8?
Yes you can, however it is A LOT easier if you make a 10.6 TimeMachine (disconnect it) and/or (best) a 10.6 Carbon Copy Cloner bootable clone. (disconnect it too)
TimeMachine drives are not bootable, so you will require your 10.6 install disk (slow) to be perfectly functional to boot and perform the ENTIRE drive erasure required to restore the 10.6 TimeMachine copy (slow) to the internal drive.
With a 10.6 bootable clone on a external drive, it's hold the option key bootable, so your up in seconds on the 10.6 clone and can be erasing the entire internal drive while surfing the web.
Also if your 10.6 disk is not working, the clone is, so it's another bootable backup.
Most commonly used backup methods
The other more complicated method to restore 10.6 on a machine that was upgraded to 10.7 or 10.8 is to extract all one's files into a neutral state on a external storage drive. (not TiThen use the 10.6 disk to wipe everything and reinstall 10.6 fresh, then programs then files.
10.7 and 10.8 changes things in the User/Library, so you can't just restore from TimeMachine backwards.
Also newer versions of programs from Apple changes their support files, like iTunes Library and iPhoto Library, so it's a lot more work extracting your original mp3's and jpg's for reimportation into 10.6 versions of those programs.
How to revert your Mac to Snow Leopard

How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

Hi Experts,
We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
So, for some reason the system message text is not getting output in ALV-->Dump!!
So, found a NOTE causing this problem!!
So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
thanq
Edited by: Srinivas on Jan 24, 2008 4:32 PM

Hi
In SNOTE tcode, select the Note that you implemented and click on 'RESET SAP Note Implementation'
shylesh

My mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

It sounds like you destroyed your boot partition and the recovery partition. Depending on it's age, your MacBook Air might be able to do a net boot. Plug and ethernet connection into it and attempt to boot. If it has the right firmware, it will find a net boot configuration on the net and boot that. Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML. If your computer came with Snow Leopard, then even the net boot won't work.
At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD.
An Apple Store, if there is one nearby, MAY be able to get you going again. However, whatever is on the SSD now will be toast too.

MacBook pro does not start. How can I back to Mac OS X Lion?

I have a MacBook Pro. On my MacBook i made three partition, then I installed window 8. After that I started windos and try to delete third partition by Administrator tool from windows operating system. After that my MacBook does not start. How can I back to Mac OS X Lion?
After that I again install windows 8 from a DVD. Windows start well, but I can not start Mac OS system, may be it was 10.6. Sever times I tried to install OS X Lion 10.7 thought DVD, I could not. On MacBook I have a lot of important data.
What can I do. I want to a complete suggestion. Please help me to solve the problem.
My MacBook Pro model no. A1286.

You installed Windows improperly the result of which was to wipe out the bootloader for OS X. You can give this a try:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the OS X disk icon from which you want to boot.
5. Click on the arrow button below the icon.
If you are still unable to boot from the OS X volume then you will need to reinstall OS X:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
This will destroy the Windows bootloader so you cannot boot into Windows. The solution is to remove all the partitions on the drive except the OS X partition, then expand the OS X partition to take up the entire drive.
Use Boot Camp Assistant in the Utilities folder to create a Windows partition on which you can install Windows. You cannot have any other partitions on the drive besides these two.
Now given all the above you may be able to install a third-party bootloader that would work with the setup you now have: Boot Runner 1.4.

How to revert back the changes that have made to Infoset

Dear Experts,
Can any one help me with solution for the below issue?
I have activated(checked) some navigational attributes to the infocube "XYZ".This "XYZ" infocube is used in Infoset and as well as in multiprovider.Instead of activating navigational attributes in the infoset ,mistakenly i have removed the infocube and reassigned(reconnected with previous settings) in the infoset.Now i realized that the technical reference names in infoset(For ex:"ABC_F12,ABC_F13") got changed and giving the problem in Multiprovider.And there are n number of queries build based on the multiprovider.
While iam trying to activate the inactived Multiprovider iam getting an error message saying "inactive infoobjects ...(.ABC_F12,ABC_F13 are not available)....
Can any body help me how to revert back the changes for the Infoset that i have made or anyother process to sort out this issue.
Earlier solutions will be appreciated.
Thanks & Regards,
Prathish.

Hi,
If the changes have been saved, then there is no automatic way of reverting the changes. To get the Infoset in the reqd state, you will have to move an unchanged copy into the dev sys. The easiest way would be to transport a copy from the Prod sys. But first you have to check whether the transport path exists. With the help of Basis team, you can do this.
wish u luck.
Regards,
Rahul

How to revert back the changes of a task in a change request ?

Hello experts,
Our ABAP team made a script and they have locked a change request for it. Whatever changes made in that script are directly written in that change request through different tasks. Yesterday they opened the script and found that some of the data in that script is missing. The task entry shows that the data is still there which was missing, but I am not able to find out how to revert back those changes which are there in the task, so that the missing data can be brought back again in the script? Can someone please tell me how to solve this problem ?
Regards,
Sanket

Hi,
If modification assistant was on while making the deletion, then the comment should exist for data which was deleted.
Else use the version history to display and recover the lost version.
For eg SE38 -> Give report name -> Display. Utilities -> Versions -> Version Management
Should show all the TRs which changed the object and can compare/restore versions too.
Regards,
Srikishan

How to revert back of secondary indexes created?

Hi all,
I have craeted secondary indexes in development and they have been transported into quality and production. Some dumps are coming in the production because of these secondary indexes.
Please guide me how to revert back those secondary indexes from production(means to keep original with out that secondary indexes?)
Please give me solution.
Regards,
Lokesh

Hello,
The best way to do this is delete the indexes again in DEV and create a transport request.
Transport this request to QA and PRD and the index will be deleted.
Via SE14 you can also delete the index immed in PRD.
SE14 will only delete the index from the database (shortdumps will disappear then).
Afterwards you can still use SE11 to delete the index from the SAP repository as well.
Success.
Wim
Edited by: Wim Van den Wyngaert on Nov 20, 2009 1:08 PM

How to revert back to not require rasterize for Photoshop?

I used to be able to color any Text, shape, or image by just selecting the particular layer and use pain bucket tool for example. Not sure what I clicked, but recently when I try to do the same; I always get the message
"This type Layer must be rasterized before proceeding. Its text will no longer be editable. Rasterize the type? "
I do not want to rasterize. Can I know how to revert back to the normal setup where I can do the coloring without the need for rasterize please.
It also seems to mess around with my selection.
For example - I have a circle shape in the middle with transparent background.
I used to be able to go Select>All followed by Select>Inverse and it will select the circle shape.
But now it selects the entire canvas when I select all but returns the following error when I Select>Inverse
"Warning No Pixels were selected".

Type:
Double-click on the T in the type layer.
In Type Options bar click on the color swatch which will open the Color Picker.
Choose a color and Commit.
The Type will remain vector and the color will have changed.
Circle:
If the circle was drawn with the Elliptical Marquee tool, Edit > Stroke'd with a color and then had the marching ants deselected:
Click on the transparent area with the Magic Wand tool. If you want to include in that selection the inside of the circle unclick Contiguous in the Magic Wand Options bar.
Then, inverse your selection to select the circular line.

HT4904 Help! I hate this new install to Mountain Lion, how to revert back?

Any one has information on how to revert back to orignal software.

If it was Lion you didn't purchase it in 2010 in as much as Lion was released in summer of 2011. In any case Mountain Lion and Lion are so similar what's to "hate"?

I recently was sent an update for Safari and I hate it. How to revert back to how it was...

I recently was sent an update for Safari and I hate it. How to revert back to how it was...

I think you'll have to reinstall the OS from your Restore partition.

How to revert back to 10.6.8 from mavericks

How to revert back to 10.6.8 from mavericks, a lot of programs i need to use are unsupported by the new update. what can i do to revert my imac back to the previous OSX

Why not simply udate your apps, it will be much easier in the long run if you do. However if you want to revert back to 10.6.8, then simply use your SL discs to reformat your HD, then update to 10.6.8 and then use Migration Assistant to migrate your apps and other data from your TM or bootable backup clone to your HD.
Going forward it's much wiser to do you due diligence before updating. You have old apps that are probably PPC based, Apple supported those until Lion was released 2 years ago. The longer you wait to update those apps the more painful upgrading will be in the future.

I have iphone 4 with iOS4.0, how to revert back version of facebook app?

I have iphone 4 with iOS4.0, how to revert back version of facebook app version because i am not able to use facebook 5.0 in my iphone?

That depends. If the phone was unlocked by the carrier, then it should be fine.
If your phone was unlocked by unauthorized means, then yes, it will be locked again.

I installed windows on my mackbook pro without downloading windows support software and now I am stuck on windows, How I can back to Mac os? To download the windows support software.

I installed windows on my macBook pro without downloading windows support software and now I am stuck on windows, How I can back to Mac os? To download the windows support software?

Boot your computer while holding down the option key. Then select OSx to boot into.

How to revert back to mac os 10.6

Similar Messages

Maybe you are looking for