How to revert back User Management  changes with SAP ep6

Hi,
While implementing sso for R/3 with sap EP, we did some changes in SAP System of UM configuration, after that we are not able to login with existing super user.
We changed the existing userid SAPJSF to some other value in SAP system of UM. This is causing the problem.
How can I revert back the changes as currently I am not able to access the UM Configuration?
Which file can be change for reverting back the changes?
Thanks,
Manish

Hi Heiko,
I restarted server two times but it does not work. I also reverted the changes from propertysheet as well. Still it does not work.
After that I looked in defaultTrace.trc file and found the exception <b>[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: User is locked. Please notify the person responsible</b>
The exception detail is below:     
1.5#0011435A6406001D0000000F000013E80003FB0CCFA7CC82#1120457372187#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_17##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: User is locked. Please notify the person responsible
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:531)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:201)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:142)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: User is locked. Please notify the person responsible
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:2099)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:2315)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:280)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:224)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:528)
     ... 6 more
Can you please tell me that how can I unlock the user as my portal is not coming up. Your reply will be helpfull to me.
Warm Regards,
Manish

Similar Messages

  • [wlpi] HOW TO replace wlpi user management mechanism with LDAP service?

    Dear all,
    Is it possible for wlpi sp3?
    Any suggestion or ideas?
    Thanks in advance
    Eric

    Eric,
    Could you please post this on the
    weblogic.developer.interest.personalization newsgroup?
    Eric Chen wrote:
    Dear all,
    Is it possible for wlpi sp3?
    Any suggestion or ideas?
    Thanks in advance
    Eric--
    Developer Relations Engineer
    BEA Support

  • How to revert back the changes that have made to Infoset

    Dear Experts,
    Can any one help me with solution for the below issue?
    I have activated(checked) some navigational attributes to the infocube "XYZ".This "XYZ" infocube is used in Infoset and as well as in multiprovider.Instead of activating navigational attributes in the infoset ,mistakenly i have removed the infocube and reassigned(reconnected with previous settings) in the infoset.Now i realized that the technical reference names in infoset(For ex:"ABC_F12,ABC_F13") got changed and giving the problem in Multiprovider.And there are n number of queries build based on the multiprovider.
    While iam trying to activate the inactived Multiprovider iam getting an error message saying "inactive infoobjects ...(.ABC_F12,ABC_F13 are not available)....
    Can any body help me how to revert back the changes for the Infoset that i have made or anyother process to sort out this issue.
    Earlier solutions will be appreciated.
    Thanks & Regards,
    Prathish.

    Hi,
    If the changes have been saved, then there is no automatic way of reverting the changes. To get the Infoset in the reqd state, you will have to move an unchanged copy into the dev sys. The easiest way would be to transport a copy from the Prod sys. But first you have to check whether the transport path exists. With the help of Basis team, you can do this.
    wish u luck.
    Regards,
    Rahul

  • How to revert back the changes of a task in a change request ?

    Hello experts,
    Our ABAP team made a script and they have locked a change request for it. Whatever changes made in that script are directly written in that change request through different tasks. Yesterday they opened the script and found that some of the data in that script is missing. The task entry shows that the data is still there which was missing, but I am not able to find out how to revert back those changes which are there in the task, so that the missing data can be brought back again in the script? Can someone please tell me how to solve this problem ?
    Regards,
    Sanket

    Hi,
    If modification assistant was on while making the deletion, then the comment should exist for data which was deleted.
    Else use the version history to display and recover the lost version.
    For eg SE38 -> Give report name -> Display. Utilities -> Versions -> Version Management
    Should show all the TRs which changed the object and can compare/restore versions too.
    Regards,
    Srikishan

  • I have iphone 4 with iOS4.0, how to revert back version of facebook app?

    I have iphone 4 with iOS4.0, how to revert back version of facebook app version because i am not able to use facebook 5.0 in my iphone?

    That depends. If the phone was unlocked by the carrier, then it should be fine.
    If your phone was unlocked by unauthorized means, then yes, it will be locked again.

  • How to revert back to not require rasterize for Photoshop?

    I used to be able to color any Text, shape, or image by just selecting the particular layer and use pain bucket tool for example. Not sure what I clicked, but recently when I try to do the same; I always get the message
    "This type Layer must be rasterized before proceeding. Its text will no longer be editable. Rasterize the type? "
    I do not want to rasterize. Can I know how to revert back to the normal setup where I can do the coloring without the need for rasterize please.
    It also seems to mess around with my selection.
    For example - I have a circle shape in the middle with transparent background.
    I used to be able to go Select>All followed by Select>Inverse and it will select the circle shape.
    But now it selects the entire canvas when I select all but returns the following error when I Select>Inverse
    "Warning No Pixels were selected".

    Type:
    Double-click on the T in the type layer.
    In Type Options bar click on the color swatch which will open the Color Picker.
    Choose a color and Commit.
    The Type will remain vector and the color will have changed.
    Circle:
    If the circle was drawn with the Elliptical Marquee tool, Edit > Stroke'd with a color and then had the marching ants deselected:
    Click on the transparent area with the Magic Wand tool. If you want to include in that selection the inside of the circle unclick Contiguous in the Magic Wand Options bar.
    Then, inverse your selection to select the circular line.

  • How to revert back of secondary indexes created?

    Hi all,
                     I have craeted secondary indexes in development and they have been transported into quality and production. Some dumps are coming in the production because of these secondary indexes.
    Please guide me how to revert back those secondary indexes from production(means to keep original with out that secondary indexes?)
    Please give me solution.
    Regards,
    Lokesh

    Hello,
    The best way to do this is delete the indexes again in DEV and create a transport request.
    Transport this request to QA and PRD and the index will be deleted.
    Via SE14 you can also delete the index immed in PRD.
    SE14 will only delete the index from the database (shortdumps will disappear then).
    Afterwards you can still use SE11 to delete the index from the SAP repository as well.
    Success.
    Wim
    Edited by: Wim Van den Wyngaert on Nov 20, 2009 1:08 PM

  • Handling Solution Manager changes with ChaRM (ChaRM on SolMan PRD)

    Hi Experts,
    Having deployed ChaRM to satellite system (three system landscape) we became interested in handling Solution Manager changes with ChaRM. We have operable ChaRM in SolMan 4.0 SP12.
    We have DEV and PRD for SolMan so we are talking about two system landscape.
    Has anyone of you done this? Does it go the same way as if SolMan was a real satellite system (rfc's=>tms=>ibase=>organization=>project=>MC=>CRs = order of configurations roughly).
    I tried searching specific instructions for this deployment but it seems that configuration guides etc focus on satellite system handling. Our need is basically to document and control SolMan changes and with ChaRM we could.
    Perhaps there is no magic to this and everything goes just like in satellite, but I would appreciate any experiences others may have had doing this.
    Kind regards,
    Auli

    Hello,
    We have implemented this with two systems landscape where in we have in place a Solution Manager Dev system and Solution manager Production system both are SOLMAN 4.0 with SP12. So the path for us to move the changes is from Development Systems to Production system.
    We have ChaRM between the Dev and production. We reapplied the satellite system concept. For us the Solution manager Prod is a satellite systems all the changes that we move from Development system to Production systems is tracked with necessary documentation in the ChaRM process.
    Yes, I agree with you that this is not any big magic. Working with two SOLMAN implementation, I strongly feel that SAP needs to have well rounded ChaRm processes. We have robust Change Management Process, but when we moved to ChaRM we were limited functionality of the ChaRM processes.
    I had approached and did some research on how other companies are implementing the same process. Most of them have almost the same process for tracking SOLMAN changes. I am still look out for improved process to manage SOLMA changes.
    Hope this helps!!! Thanks
    Vish

  • How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

    Hi Experts,
    We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
    So, for some reason the system message text is not getting output in ALV-->Dump!!
    So, found a NOTE causing this problem!!
    So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
    thanq
    Edited by: Srinivas on Jan 24, 2008 4:32 PM

    Hi
    In SNOTE tcode,  select the Note that you implemented and click on 'RESET SAP Note Implementation'
    shylesh

  • How to stop  the users from changing the Decimal in SAP

    How  to stop  the users from changing User Profile

    Hai,
    It is not possible to restrict SU3 to display, because it has only S_TCODE has the authorization object.
    If you really want to restrict users from changing their profile you have to remove the SU3 access and give SU1 or SU2 which gives access only to Personnel details and Parameters.
    Hope this helps.
    Regards,
    Yoganand.V

  • How to revert back previous working files in InDesign CS6?

    I have suddenly replace wrong working files, how to revert back previous working files in InDesign CS 6?
    OS Mac version: 10.10.3
    InDesign CS6 version

    This feature does not exist in InDesign. You're best hope is that you have a backup of the previous file. Moving forward, you might want to try a free product called Radish that allows you to save versions and revert back to previous versions when needed. Here's a blog post I wrote about the product Story Versioning in InCopy | InCopySecrets.

  • How to disable other users from changing the status

    Hi,
    The status entry field can be changed irrespective of ownership in Documents.
    I was able to change the status on the document created by other user.
    Example: The status of document was In-Work. The document owner was X. But I was able to change it to Inspection Check.
    How to disable other users from changing the status?
    Regards,
    Shashi

    This is a frequently discussed topic.Please use the search feature.It has been discussed in [previous posts|CV01N: Filter documents by role; in various contexts.
    Regards,
    Pradeepkumar Haragoldavar

  • HT4904 Help! I hate this new install to Mountain Lion, how to revert back?

    Any one has information on how to revert back to orignal software.

    If it was Lion you didn't purchase it in 2010 in as much as Lion was released in summer of 2011. In any case Mountain Lion and Lion are so similar what's to "hate"?

  • HT1766 What if an ipad is the only device you have from Apple? How could you back your things up with the cloud ?

    Hi my issue is that I dropped my ipad, and the screen is now blue. I have tried pressing the power button and the center button (I even pit it on the charger), but the screen is still blue. My questions are am i covered to get a replacement, and how do I back-up my stuff with the cloud if the ipad is my only apple device?

    If you didn't have iCloud backup turned on before you broke it, you are out of luck.
    Accidental damage is not covered by warranty.
    You can get an out of warranty replacement from Apple for around $250.

  • I recently was sent an update for Safari and I hate it. How to revert back to how it was...

    I recently was sent an update for Safari and I hate it. How to revert back to how it was...

    I think you'll have to reinstall the OS from your Restore partition.

Maybe you are looking for