How to Revert STMS_QA approval

Hi experts,
I have done STMS_QA in User Acceptance system to move the TR to Production.But now I realize that I have done a mistake and I want to revert the Approval given using STMS_QA.
Kindly Help me out in this.
thanks,
Rakshith

Hi Rakshithshetty,
you should be able to delete the transport request. After all approval steps have been done, you can not revert those steps.
SAP recommends to approve averything and create a new transport for the sutuation required, then transport them as a package together to PRD.
Regards,
Clemens

Similar Messages

How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

Hi Experts,
We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
So, for some reason the system message text is not getting output in ALV-->Dump!!
So, found a NOTE causing this problem!!
So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
thanq
Edited by: Srinivas on Jan 24, 2008 4:32 PM

Hi
In SNOTE tcode, select the Note that you implemented and click on 'RESET SAP Note Implementation'
shylesh

How to change default approval for ResourceAuthorizerApproval ?

Hi,
I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
I'm using OIM 11g and Design Console 11.1.1.3.0.2.0

Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
If there are other solutions please share with me
Thanks
M.

I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie. Any ideas on how to get around this - how to revert to the previous version.

I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie. Any ideas on how to get around this - how to revert to the previous version??

Look in your Applications folder. If your system behaved as expected, you should have an iMovie 9.0 folder in your Applications folder. Apple moved the old version there as even they suspected the new versions was a train wreck.

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!

Hi Kglad.
I have looked at all of my settings both in Bridge and CS6 Photoshop regarding Camera Raw. I am at a loss how to set the crop tool in cm or inches as I once did - now the only option is to crop using ratios of 1:1 etc etc - This is infuriating as lots of my square crops I could set at 10" x 10'' specifically to print one to one to fit frame and mount size -
Now if cropping using bloody aspect ratio of 1:1 (square) the actual dims of the crop are roughly 4.25 inches x 4.25 inches. this means I then have to open the whole image in photoshop in order to crop at the dims I have set! It was so much quicker in terms of batch cropping in camera raw being able to set dims in centimetres and inches but they have gone and mucked around with it, with the new bloody update! Unless you are an absolute genius and know how I can go back to having an option of CM, Inches and aspect ratio within the custom crop settings? (Please say you do)
here is the new tutorial for CC - my guess is they have scrapped the control we had over the custom crop settings
Cropping Images In Adobe Camera Raw 8

How to revert back previous working files in InDesign CS6?

I have suddenly replace wrong working files, how to revert back previous working files in InDesign CS 6?
OS Mac version: 10.10.3
InDesign CS6 version

This feature does not exist in InDesign. You're best hope is that you have a backup of the previous file. Moving forward, you might want to try a free product called Radish that allows you to save versions and revert back to previous versions when needed. Here's a blog post I wrote about the product Story Versioning in InCopy | InCopySecrets.

How to revert request posting in inventory cube 0IC_C03

Hi Experts,
We are doing inventory at our storage. We have one problem
By mistake 2 delta requests are posted in 0IC_C03 cube and it is compressed.How to revert back the last delta request.
Thanks

Hi ,
You can revert bcak by doing Selective Deletion.
You search for a field Load Date in cube, If ypu have that field pls go ahead and give yesterdays or todays load date as per your requirement as selections and delete the data selectively.
Else if you dont have load date then, you need to do small work around........Go to PSA and put filter on Posted date or created on date or some time fields and figure out the list of dates.
Based on above dates you can clean up the previous records from cube by doing selective deltion.
Regards
SujanR

How to make manager approve more than one request in one time in SSHR

Dear All,
Anyone has an idea on how to make manager approver more than one request in one time in SSHR??
for example, manager is having 20 requests to approve on Change Pay Function, he don't want to check one by one and approve it, he want to approve the 20 requests directly from one time, is there any solution for that??
Thanks and Regards

Hi Adel,
As Vignesh has mentioned we don't have any standard functionality which will allow bulk approvals. We had same kind of requirement in performance management where the business was asking for a bulk approval feature which should be available to Skip level manager for approving the rating suggested by line manager. We had created a custom page which will list all the notifications and user can select the ones which S/He wants to bulk approve and click submit button. Internally we had called the workflow with item key and other required parameter and do the approval.
You can have a work with your technical guy and can work on the same lines.
Thanks,
Sanjay

How to revert the changes done in an ABAP query

hi experts,
how to revert the changes done in an ABAP query.
I renamed a field in ABAP Query in development system, but the output list now has overlapping fields.
the renamed field is getting overlaped with other fields, also one more field has overlapped.
now the problem is how to get back to the previous version of the query so that the overlapping fields can be corrected.
renaming one field has led to the problem of overlapping fields in the output.
the sequence of the fields has also been affected.
Please help

Hi,
Goto Utilities-> versions-> version management.
It will show you list of previous TR's. Just click on the version which you want to retrieve and click on Retrieve button on the top.
Your program will be retrieved to your previous version before change.
Hope this will help.
Regards,
Aravind.

Seriously: How to revert to iTunes 6 safely?

Somebody knows how to revert to previous version? Sincerely, I don´t like videos, I have no time to fight with all the bugs of the new version, and I want to return to the working one. I can save my home folder, restore a complete backup of last week to get the application, and then restore the home folder but, that will work? Or the iTunes library files, updated by version 7 will not work with 6 anymore?

If you want to revert to iTunes 6:
• Trash iTunes 7
• Delete the 'iTunesX.pkg' file from ./Library/Receipts
• Run the iTunes6 installer. It should install without any problem. Older versions (iTunes 6.0.5 not yet) are available here.
• Trash the 'iTunes Library' file in ./Users/Username/Music/iTunes
• Create a copy of the 'iTunes Library 2006-09-12' (or a date near this one) in ./Users/Username/Music/iTunes/Previous iTunes Libraries and rename it to 'iTunes Library'
• Put this file at ./Users/Username/Music/iTunes.
• Run iTunes 6. It should recognize the library without any problem. Any changes you made during the time you used iTunes 7 are lost of course.
I tested the above procedure 2 days ago and it worked without problems.
Hope this helps.
M
Edit:
I tested the above procedure only to see if it possible to revert to iTunes 6 in case of trouble. I don't experience problems with iTunes 7 on my system.
17' iMac 800 MHz, 768 MB RAM, 200 GB HD, DL burner Mac OS X (10.4.7) iTunes 7.0
Message was edited by: macmenno

How to revert back the changes that have made to Infoset

Dear Experts,
Can any one help me with solution for the below issue?
I have activated(checked) some navigational attributes to the infocube "XYZ".This "XYZ" infocube is used in Infoset and as well as in multiprovider.Instead of activating navigational attributes in the infoset ,mistakenly i have removed the infocube and reassigned(reconnected with previous settings) in the infoset.Now i realized that the technical reference names in infoset(For ex:"ABC_F12,ABC_F13") got changed and giving the problem in Multiprovider.And there are n number of queries build based on the multiprovider.
While iam trying to activate the inactived Multiprovider iam getting an error message saying "inactive infoobjects ...(.ABC_F12,ABC_F13 are not available)....
Can any body help me how to revert back the changes for the Infoset that i have made or anyother process to sort out this issue.
Earlier solutions will be appreciated.
Thanks & Regards,
Prathish.

Hi,
If the changes have been saved, then there is no automatic way of reverting the changes. To get the Infoset in the reqd state, you will have to move an unchanged copy into the dev sys. The easiest way would be to transport a copy from the Prod sys. But first you have to check whether the transport path exists. With the help of Basis team, you can do this.
wish u luck.
Regards,
Rahul

How to create Invoice Approval in oracle Payable R12 ?

Hi All..
Can any one let me know how to create Invoice Approval in oracle payable R12?

pl.go thru following link.
http://oracleerpfunctional.blogspot.in/2012/08/ap-invoice-approval-workflow-setup-and.html
http://oracleerpfunctional.blogspot.in/2012/08/oracle-approvals-management-ame-setup.html
http://www.scribd.com/doc/101107120/Oracle-Payables
HTH
Sanjay

How to get task approver name in workflow

I have created a workflow for document publish triage. The triage task is send to a group "Publishers", this group have multiple members. After the task is approved/rejected by someone, I need send mail to the task requester and tell
the requester who approved/rejected this request?
My question is that: how to get the approver's name? Which data source in the lookup is related to this?
Best regards,
Glen Qu (Fareast\v-zuqu)

Try below:
http://sharepoint247.wordpress.com/2013/05/24/handy-email-utility-for-any-sharepoint-project/
interface IEmailConfigurationManager
/// <summary>
/// Gets Email Template by it's ID
/// </summary>
/// <param name="emailTemplateId"></param>
/// <returns></returns>
EmailTemplate GetEmailTemplate(string emailTemplateId);
/// <summary>
/// Gets Email Template by it's ID by updating the email template properties
/// </summary>
/// <param name="emailTemplateId"></param>
/// <param name="subjectProperties"></param>
/// <param name="bodyProperties"></param>
/// <returns></returns>
EmailTemplate GetEmailTemplate(string emailTemplateId,
IDictionary<string, string> subjectProperties,
IDictionary<string, string> bodyProperties);
/// <summary>
/// Add new email template.
/// </summary>
/// <param name="emailTemplateId"></param>
/// <param name="emailTemplateSubject"></param>
/// <param name="emailTemplateBody"></param>
void AddEmailTemplate(string emailTemplateId, string shortDescription,
string emailTemplateSubject, string emailTemplateBody);
https://spemailutility.codeplex.com/
http://social.msdn.microsoft.com/Forums/en-US/ef945d33-50c5-4b89-8bb9-32a95498b419/how-to-change-email-template-for-the-approval-workflow?forum=sharepointcustomizationlegacy

How to revert back the changes of a task in a change request ?

Hello experts,
Our ABAP team made a script and they have locked a change request for it. Whatever changes made in that script are directly written in that change request through different tasks. Yesterday they opened the script and found that some of the data in that script is missing. The task entry shows that the data is still there which was missing, but I am not able to find out how to revert back those changes which are there in the task, so that the missing data can be brought back again in the script? Can someone please tell me how to solve this problem ?
Regards,
Sanket

Hi,
If modification assistant was on while making the deletion, then the comment should exist for data which was deleted.
Else use the version history to display and recover the lost version.
For eg SE38 -> Give report name -> Display. Utilities -> Versions -> Version Management
Should show all the TRs which changed the object and can compare/restore versions too.
Regards,
Srikishan

How to assign Dynaminc Approver in GP

Hi,
Iam developing one application in GP .In first collable object form the user has to fill the department and other details..
Depending up on the department chosen it should go to the concern department manager for approval..
For e.g IT dept the approver should IT head
         Finance dept the approver should Finance head..
How to assign the approver dynamically...
How to get the first form value and to approve
Iam using webdynpro form in GP..
Help me.
Very Urgent..
Thanks&Regards,
Kiruthika.S

Hi All,
I have problems with designing the PDB, how it is teached in the <a href="http://help.sap.com/saphelp_nw2004s/helpdata/de/43/7e5b306b3b2679e10000000a1553f7/content.htm">help-link</a>.
My Block design:
Block: Confirm Decision (sequential)
      Action: Add members (Output-Table with Column
                           UserID)
      Block: PDB
            Block: Confirm (sequential)
                Action
                     CO: Confirm (Execution)
                     CO: Confirm (Display)
The mapping between Output-Table and Input-Table works, I get the Users in the Confirm-Action. But the Fill From Context doesnt work, what is the problem?
David said that its necessary that the Technical Name of the Multiline-Input-Structure (Input for PDB) and the Action (Output) is the same. But for me its not possible to rename the Multiline-Input-Structure to the technical name of the Action, because: Parameter with technical name UserStructure already exists in local context (=error message).
When I dont change the Technical Name, the mapping works, but the block doesnt work correct. The user who Add the Members (Action: Add Members) is responsible for all PDB-Actions, and the real Responsibles (like PDB-table) do not have a workitem in there worklist.
Thanks for helping me
Steve
Message was edited by: Steve Mussdorf

How to Revert STMS_QA approval

Similar Messages

Maybe you are looking for