How to revert to 3.4.1 from 3.5RC?

Hi,
I made the mistake of trying the RC of 3.5 and now when I hit the print button or choose print settings, Lightroom crashes immediately. Initially I thought that this was a problem with print drivers but I can print fine from Photoshop or <gasp. Aperture, along with any other applications.
I was able to print from Lightroom 3.4.1 with great success to a variety of printers but wanted to see the difference in a print with my new Epson 4900 and boom out go the lights whenever I go to print. I really like Lightroom's print templates and have created enough of them for collage style output that not being able to print from Lightroom is a real PITA.
Doing a full uninstall seems to mean do a manual search and destroy through the filesystem followed by an install and then a reinstall of all of my plugins that work just fine now.
Is there a Print module that I can look to specifically?
I have deleted the RC application and done a reinstall with 3.4.1 (without ripping out all the prefs etc) but no joy. It has to be something relatively simple (I hope). Any help will be sincerely appreciated.
Thanks,
Ross

Good call on the printer driver issue. Last month I updated the drivers for my Canon photo printers using drivers from Canon and things got odd, I thought I had it fixed since Lightroom had been printing, but Lightroom does not seem to update the image driver settings until AFTER you actually print something.
By deleting the printer in System Preferences and then launching Lightroom, it forced Lightroom to revert to a default text printer. I was then able to use the Print and Print Settings functions to configure Lightroom to print to the Epson 4900, and it is working now.
Thank you kindly for your diligent thinking and leading me to the solution. Others may encounter similar challenges and your help will help them too.
Best,
Ross

Similar Messages

How to revert to 10.6.2 from 10.6.3 ?

Hi,
Could someone please help me with the procedure to revert to 10.6.2 from 10.6.3 on my late 2009 mac mini.
I have the 10.6.2 combo dmg file.
Thanks

Meherally wrote:
It is just that this 6.3 delta has thrown up problems with some users, and almost everyone has reported success after applying 6.3 combo. I am not a computer professional so unable to explain why.
The explanation is fairly simple, but users not aware of it often draw the wrong conclusion about what a combo updater can do to avoid or repair post-update problems. Basically, it is that if there is damage in one or more of the currently installed OS component files, or if one or more is missing, then an updater that contains an updated version of the affected files will replace whatever is or should be there, repairing the problem.
For example, say that there is undiscovered corruption in some obscure component file buried in one of the bundle or application packages in /System/Library/CoreServices. (Packages are folders that look like single files, but actually contain many items, often including other packages.) That file may rarely if ever used by the currently installed OS version in day-to-day operation so the user may be unaware that there is a problem with it.
If that file has been updated in say 10.6.2 but not further updated in 10.6.3, then the delta version of the 10.6.3 updater won't replace it, but the combo version will (because it contains replacements for all files updated since 10.6). Thus, the combo will repair the damage but the delta won't.
However, if the damaged file has not been updated since 10.6 was first released, neither version of the updater will replace it, & thus neither will repair the damage. To repair it, the user can reinstall Snow Leopard from the DVD & update it as needed to the current version. In this case, it won't matter what updater type is used since the damage has already been repaired.
Another example: Say the damaged file is used +by the update process itself+. Depending on when & how it is used, it may not matter a bit if a replacement is included in the update package -- if it isn't already installed when it is needed, the update will fail. In fact, depending on the kind of corruption in the file & how its used, it may end up damaging other, already installed OS files. Again, the remedy for this is reinstalling the OS from the DVD & updating it as needed.
These examples illustrate why the combo update is not certain to avoid or repair problems, & one reason users sometimes attribute problems to an update that are actually caused by unnoticed pre-existing problems.

How to revert to diagnostics.wadcfg configuration from wad-control-container blob.

Hello all,
In our project at some point in the past we have enabled Diagnostics module for getting our log entries in Azure Storage. We added <Import moduleName="Diagnostics" /> to ServiceDefinition.csdef file and then enabled logs transfering and performance
counters gathering in WebRole.OnStart method via DiagnosticMonitor.Start():
DiagnosticMonitorConfiguration cfg = DiagnosticMonitor.GetDefaultInitialConfiguration();
cfg.OverallQuotaInMB = 8192;
cfg.Logs.ScheduledTransferLogLevelFilter = LogLevel.Verbose;
cfg.Logs.ScheduledTransferPeriod = TimeSpan.FromSeconds(30);
cfg.Logs.BufferQuotaInMB = 1000;
// Define performance counter configuration.
foreach (var counterName in PERFORMANCE_COUNTERS_NAMES)
PerformanceCounterConfiguration perfCounterConfiguration = new PerformanceCounterConfiguration();
perfCounterConfiguration.CounterSpecifier = counterName;
perfCounterConfiguration.SampleRate = TimeSpan.FromSeconds(5);
cfg.PerformanceCounters.DataSources.Add(perfCounterConfiguration);
cfg.PerformanceCounters.BufferQuotaInMB = 1024;
cfg.PerformanceCounters.ScheduledTransferPeriod = TimeSpan.FromMinutes(1);
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString", cfg);
Then using Windows Azure Management Portal we activated Verbose monitoring mode and added several additional performance counters there in order to try the feature. I assume that doing that through the portal we actually modified wad-control-container blob
so we got new performace counters configuration.
Later we've realized that it would be better to manage all diagnostic configuration in diagnostics.wadcfg. We removed the code from role start and added diagnostics.wadcfg file to the project that declares the same we did before via code. When we redeployed
we saw that the configuration remained as it was before - it didn't change at all. It still included new performance counters we added through the portal. It is because the order of precedence, where wad-control-container blob has the highest priority. So
we deleted all the blobs from wad-control-container in order to revert back to diagnostics.wadcfg and redeployed the service. New blob was created in wad-control-container. It included everything from diagnostics.wadcfg as we expected and
again we saw these custom performance counters we added via portal time ago. See below the blob content:
<?xml version="1.0"?>
<ConfigRequest xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DataSources>
<OverallQuotaInMB>8192</OverallQuotaInMB>
<Logs>
<BufferQuotaInMB>1024</BufferQuotaInMB>
<ScheduledTransferPeriodInMinutes>1</ScheduledTransferPeriodInMinutes>
<ScheduledTransferLogLevelFilter>Verbose</ScheduledTransferLogLevelFilter>
</Logs>
<DiagnosticInfrastructureLogs>
<BufferQuotaInMB>1024</BufferQuotaInMB>
<ScheduledTransferPeriodInMinutes>5</ScheduledTransferPeriodInMinutes>
<ScheduledTransferLogLevelFilter>Warning</ScheduledTransferLogLevelFilter>
</DiagnosticInfrastructureLogs>
<PerformanceCounters>
<BufferQuotaInMB>4096</BufferQuotaInMB>
<ScheduledTransferPeriodInMinutes>5</ScheduledTransferPeriodInMinutes>
<Subscriptions>
<PerformanceCounterConfiguration>
<CounterSpecifier>\Memory\Available Mbytes</CounterSpecifier>
<SampleRateInSeconds>10</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\Processor(_Total)\% Processor Time</CounterSpecifier>
<SampleRateInSeconds>10</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET Applications(__Total__)\Requests/Sec</CounterSpecifier>
<SampleRateInSeconds>5</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET Applications(__Total__)\Requests Executing</CounterSpecifier>
<SampleRateInSeconds>5</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET Applications(__Total__)\Requests In Application Queue</CounterSpecifier>
<SampleRateInSeconds>5</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET Applications(__Total__)\Requests Failed</CounterSpecifier>
<SampleRateInSeconds>30</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET Applications(__Total__)\Requests Timed Out</CounterSpecifier>
<SampleRateInSeconds>30</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET\Requests Rejected</CounterSpecifier>
<SampleRateInSeconds>30</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET\Worker Process Restarts</CounterSpecifier>
<SampleRateInSeconds>600</SampleRateInSeconds>
</PerformanceCounterConfiguration>

<PerformanceCounterConfiguration>
<CounterSpecifier>\Memory\Available MBytes</CounterSpecifier>
<SampleRateInSeconds>180</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\Web Service(_Total)\ISAPI Extension Requests/sec</CounterSpecifier>
<SampleRateInSeconds>180</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\Web Service(_Total)\Bytes Total/Sec</CounterSpecifier>
<SampleRateInSeconds>180</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET Applications(__Total__)\Errors Total/Sec</CounterSpecifier>
<SampleRateInSeconds>180</SampleRateInSeconds>
</PerformanceCounterConfiguration>
<PerformanceCounterConfiguration>
<CounterSpecifier>\ASP.NET\Requests Queued</CounterSpecifier>
<SampleRateInSeconds>180</SampleRateInSeconds>
</PerformanceCounterConfiguration>

</Subscriptions>
</PerformanceCounters>
<WindowsEventLog>
<BufferQuotaInMB>0</BufferQuotaInMB>
<ScheduledTransferPeriodInMinutes>0</ScheduledTransferPeriodInMinutes>
<Subscriptions />
<ScheduledTransferLogLevelFilter>Undefined</ScheduledTransferLogLevelFilter>
</WindowsEventLog>
<Directories>
<BufferQuotaInMB>256</BufferQuotaInMB>
<ScheduledTransferPeriodInMinutes>5</ScheduledTransferPeriodInMinutes>
<Subscriptions>
<DirectoryConfiguration>
<Path>C:\Resources\directory\ac17d63416cf41c8acfebbbcb3d90052.Mbo.Services.Web.DiagnosticStore\CrashDumps</Path>
<Container>wad-crash-dumps</Container>
<DirectoryQuotaInMB>256</DirectoryQuotaInMB>
</DirectoryConfiguration>
</Subscriptions>
</Directories>
</DataSources>
<IsDefault>false</IsDefault> 
</ConfigRequest>
We tried to directly edit this XML. We removed redundant counters and changed IsDefault to "true" value in the XML and updated the blob in the wad-control-container using Azure Management Studio. Next time we redeployed the service - the counters
again appeared in the configuration and IsDefault reverted to false again.
Does anyone know how to permanently revert to managing diagnostics configuration only via diagnostics.wadcfg file and force the Azure to forget about manual edits we did via the portal?
We use Azure SDK 1.4.
Thanks in advance for any insights!
Vitaly

Hi Vitaly,
Did you try to change diagnostics configuration in VS? Like this:
I suggest you could click the "Edit", and select your diagnostics metrics. Also, I want you double check your re-deployment project whether is right. Please try it.
By the way, I suggest you could upgrade your SDK version and refer to this sample:
http://www.windowsazure.com/en-us/develop/net/common-tasks/performance-profiling/
http://msdn.microsoft.com/en-us/library/windowsazure/hh411542.aspx
Any question or result, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to revert to older Symbian S3 from Symbian ANN...

Hi, I downloaded the Symbian Anna and honestly, it's not as great as it's been made out to be!
Now I want to revert to the earlier S3 version and am unable to do so! What can be done to regain the old version of the OS?
I tried a Restore to factory settings from the phone, but it just goes back to factory settings with ANNA, how do I change the OS back to the earlier one?
Any help will be greatly appreciated!!!

It's not possible, however Anna is a great improvement !! Did you reset the phone before updating ? A reset is always recommended as it will remove any conflict between the new and old software, it's a pain, but worth the effort, my E7 is running great on Anna and all the improvements are worthwhile .
Back up your contacts, calendar and notes ONLY, dial *#7370# followed by 12345 if required, re-install Anna, then set up your phone manually, it is worth the effort
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

How to revert back to Snow Leopard from Lion?

Foolishly I just jumped straight in, downloaded Lion and installed it, and well... I really don't like it. It's not a patch on SL.
So I'm trying to work out the best way of reverting back to Snow Leopard.
I have:
My Snow Leopard install disc.
A SuperDuper, bootable backup from 48 hours pre-upgrade.
A Time Machine backup from 48 hours pre-upgrade.
I'm fairly sure that just putting the SL install disc in, isn't going to work.
I think I have a couple of options.
1. Erase the hard drive completely, and then do a fresh SL install, then restore the last TM backup.
2. Boot from the SuperDuper backup, then restore the last TM backup.
I'd prefer option 1, as this gives me a clean install (I hope).
Before I go ahead, can anyone:
a) See any problems with carrying this out, or
b) Suggest a better, safer method?
I'm a bit concerned that SL was an upgrade to an existing OS, rather than a complete OS in itself, so I'm very wary of what might happen if I wipe the drive then put the disc in, hoping it'll give me a nice new version of SL. Might need to go and do a bit more reading up.
Thanks.

For ref.
Dragged and dropped copies of important files (Docs, Pictures, Downloads, Movies etc) to a spare drive.
Printed off any docs that I absolutely could not afford to lose.
Shut down Mac.
Attached USB drive with SuperDuper backup, and powered up drive.
Powered up Mac, and immediately pressed the option key.
From the window that popped up, chose my USB drive as the boot disk and pressed return.
Mac powered up running Snow Leopard from USB drive.
Started Disk Utility, and erased the disk labelled 250.06 GB Fujitsu.... etc In the 'name' field, entered 'Macintosh HD'
Started up SuperDuper! and copied my backup over Macintosh HD.
Incidentally, the first step it took was to erase Macintosh HD anyway, so I could probably have skipped the first erase.
Let SuperDuper! do it's thing for 90 mins.
Once it had completed, closed the machine down (it wouldn't let me eject the USB drive, as presumably it was still using that as the boot disc).
Detached and powered off USB drive.
Pressed Mac power button and crossed fingers...
And goodbye annoying Lion, hello again, good old Snow Leopard!
Didn't even need to restore the last Time Machine backup.
I may take another look at Lion again, further down the road, when hopefully Apple will have realised that OS X and iOS are two completely different animals, and that we don't all want our Macs behaving like our iPads.
For now though, I'm sticking with SL.

How to revert back the essbase installation from 'as a service'

Hi,
at the time of installing Hyperion essbase ver9.3.1,I installed it as a service, so now I can't see the essbase server window any more. Is there any process to revert back the aforesaid, so that I can start the essbase server manually and can see the server window afront?
Thanks & Regards.

Hi,
Yes, it worked fine. Thanks for your support.
Regards.

To revert back a transport request from prd to dev server

hi experts
    how to revert back a transport request from prd server to
    dev server?
    a transport request has been wrongly transported
    and it has make major changes in production server,
   now we want to revert back that request , we know the   request no.
regards
pankaj

All you have to do is create an order of transport type "Transport of copies" in PRO.
I give you the steps to follow:
1. Go to SE01 and create a new order (remember the type "Transport of copies").
2. Enter the data of the order of transport that is going to come back.
3. Enter the target, here is where you asign the target system to carry the request.
4. Now just add the number of request to the new request you just created.
5. Finally released the request from this transaction.
6. Check on the queue of transport in DES, the request must appear there.
I hope you serve =)

How to revert back of secondary indexes created?

Hi all,
I have craeted secondary indexes in development and they have been transported into quality and production. Some dumps are coming in the production because of these secondary indexes.
Please guide me how to revert back those secondary indexes from production(means to keep original with out that secondary indexes?)
Please give me solution.
Regards,
Lokesh

Hello,
The best way to do this is delete the indexes again in DEV and create a transport request.
Transport this request to QA and PRD and the index will be deleted.
Via SE14 you can also delete the index immed in PRD.
SE14 will only delete the index from the database (shortdumps will disappear then).
Afterwards you can still use SE11 to delete the index from the SAP repository as well.
Success.
Wim
Edited by: Wim Van den Wyngaert on Nov 20, 2009 1:08 PM

For some reason my Itunes deleted my current library and reverted back to a library from 5 years ago! How do I take the music from my Iphone and put it back into my Itunes library?

For some reason my Itunes deleted my current library and reverted back to a library from 5 years ago! How do I take the music from my Iphone and put it back into my Itunes library?

backup from old computer and restore to new either to icloud or an external drive also check out turingtest2's excellent article on backup using synctoy

How to revert the maintainence image from 2.1(5) to 2.1(3) on NAM2 Module.

Hi,
Could some one please help me with the procedure or document on how to revert the maintainence image from 2.1(5) to 2.1(3) on NAM2 Module/
As I am trying to upgrade the 4.0 software version on the nam.
Thanks in advance.
Regards
Alex.

I follwed this note only (Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite 11i [ID 290807.1]) to upgrade my Jre -1.6.0_23 version .Use the same steps to downgrade to 1.6.0_20 (i.e. download the correct plug-in, issue "txkSetPlugin.sh jversion" with the desired version, ..etc).
I given it to application team for testing they come back with some issues telling that some application and users unable to access so requesting to downgrade the JRE to 1.6.0_20 version.What issues? Have you considered upgrading to 1.6.0_24?
Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23
http://blogs.oracle.com/stevenChan/2010/12/mismanaged_session_cookie_issue_fixed_ebs.html
Is it possible to downgrade ? Try the above, or restore from a backup (if you have one) which is taken before upgrading to 1.6.0_23
Thanks,
Hussein

How to revert back to 10.6.8 from mavericks

How to revert back to 10.6.8 from mavericks, a lot of programs i need to use are unsupported by the new update. what can i do to revert my imac back to the previous OSX

Why not simply udate your apps, it will be much easier in the long run if you do. However if you want to revert back to 10.6.8, then simply use your SL discs to reformat your HD, then update to 10.6.8 and then use Migration Assistant to migrate your apps and other data from your TM or bootable backup clone to your HD.
Going forward it's much wiser to do you due diligence before updating. You have old apps that are probably PPC based, Apple supported those until Lion was released 2 years ago. The longer you wait to update those apps the more painful upgrading will be in the future.

How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

Hi Experts,
We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
So, for some reason the system message text is not getting output in ALV-->Dump!!
So, found a NOTE causing this problem!!
So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
thanq
Edited by: Srinivas on Jan 24, 2008 4:32 PM

Hi
In SNOTE tcode, select the Note that you implemented and click on 'RESET SAP Note Implementation'
shylesh

How do I move my Time Capsule from Ethernet back to Wireless?

Problem: i need to back to wireless use of TC from temporary use of TC via Ethernet.
Background:
I have had my Time Capsule set up for years as my Airport / wireless hub and backup. No problem.
Until I went to restore iPhone from Time Machine and, separate problem, need to connect my MacBook Pro to my Time Machine by Ethernet cable in order to get a direct connection (iPhoto was not restoring from Time Machine wireless, kept hitting I/O errors. Worked fine when I did it with direct Ethernet connection, another story).
NOW, I can not see to figure out how to revert back to regular, wireless, Airport hub connection (vs. Eternet direct)
Other information:
1. When I open Airport Utility it does not "see" my Time Capsule at all.
2. Also, it does not let me "see" manual setup, or anything else, except for "rescan" which turns up without any results.
3. The amber light keeps flashing.
4. Previously I turned TC off, then on by unplugging and plugging. Flashing amber light. Same problem.
5. All cables are plugged in tight, from ISP/FIOS cable, to TC via Ethernet, and, hopefully temporarily!, from TC to my MacBook Pro via Ethernet cable (which is what I want to undo, and go back to wireless)
6. I am able to access Internet staying with cable running in configuration in previous point.
Thanks in adv

You could have the TC join your existing wireless network as a client, or you can can connect the Time Capsule's WAN port to the modem/router.
In both cases the TC's "connection sharing" should be set to "Off (Bridge Mode)".
If the TC "joins" the wireless network you can only back up over your wireless connection, so the second option is preferable.

How can I get the edited pictures from the thumbnails to full size?

I upgraded to iPhoto 11, the thumbnail photos show my previous edits, but when I click on the photo to make it bigger, it reverts back to the unedited, original picture. How can I get the edited pictures from the thumbnails to full size?

Verify you are using iPhoto11 ver 9.5
if not run the >Software update or check your apps folder and make sure the correct iPhoto is launched, not an older ver.

How can I create an RSS feed from my Azure Storage Blob?

I'm a Tech Evangelist at Microsoft, based out of Philadelphia. I also have a podcast,
http://indiedevpodcast.wordpress.com/, and was previously hosting my show on PodOmatic.
I made the switch to Azure blog storage today, and I'm able to get the content there:
https://indiedevpodcast.blob.core.windows.net/podcasts/Ep%2016%20Wimbus%20Studios.mp3/
The issue though, is how do I generate an RSS feed from my podcasts in Azure blog storage? It says "file not found", but it opens up Window Media Player and plays the file for me.
*shrug*
Is this what I'm looking for? http://azure.microsoft.com/en-us/documentation/articles/storage-dotnet-how-to-use-blobs/
Thanks!
MS Tech Evangelist - Philadelphia | Baltimore Previously: Xbox Engineer at Comcast www.DavidVoyles.wordpress.com

Hi,
Thank you for reaching out to us.
I am currently researching to gather more information with regards to your request.
I shall revert back to you with an update at the earliest.
Sincerely appreciate your patience.
Regards,
Shirisha Paderu

How to revert to 3.4.1 from 3.5RC?

Similar Messages

Maybe you are looking for