How to revert VMWare RAC OBE toolkit to its original state?

I have installed the Oracle By Example VMWare RAC toolkit and I have done a few of the tutorials. But now I think I have made a mess of it, so I want to revert my virtual machine to its original state, just as it was when I had just installed it. How can I do it? I took several snapshots as I went along with the tutorials, but none of them is good for me.
I hope I do not have to install the whole environment again.
Any help would be appreciated.

Well if you didn't take a snapshot of original state then you can only delete all .vmdk files and extract original one again ...

Similar Messages

HT5639 At present I have Windows programs installed using parallels 7. I now wish to delete all Windows based programs and revert the hard drive back to its original state ie single partition. How do I go about it??

At present I have windows based programs installed using parallels 7 on my Imac. I now wish to delete all the Windows programs etc and revert the Hard Drive to its original setting i.e single partition. How do I go about it??

It's not clear if you installed Windows in a virtual machine or you installed Windows in Boot Camp but you run it in Parallels.
If you installed Windows in Boot Camp, open "Boot Camp Assistant" (it's in /Applications/Utilities) and follow the steps to restore your hard disk into one volume. If you installed Windows on a virtual machine, just open Parallels and delete the virtual machine where you have installed Windows

How do I revert a spread for print to its original state?

I have a brochure that was designed in default form (page 1 as front page/1st line, pages 2-3 on second line of pages tab, etc.). This brochure was then converted to a spread for print so the appropriate pages would line up, and was then saved as layout (not as the original layout). Is there a way to get my original layout back? I would like to export as a pdf in a single page format (opposed to two pages on the same page) Is this possible? Please help!:)

Is it still single pages, just arranged for the printer, or do you now have both sides of the spread on single pages twice as wide?
If you've still got individual pages you can try just dragging them around in the pages palette, but that's going to be hard to keep track of In CS2 because the page icons don't yet show the content thumbnails. It would be easier, I think to create a new document the same size and drag pages from the pages palette of the first document into the document window (not the palette) of the new doc. You can drag them in the correct order and they should be added to the end each time, then delete the original page 1 which should be blank. Import any styles from the original document to be sure the text doesn't change (from the Paragraph or Character styles palette menu choose "load styles").
If you don't have inidvidual pages, make a new document with the correct page size and number of pages, then copy elements from one document and paste into the other. Load styles as above.
Peter

My computer has reverted back to its original state!! Help!!!

I was using my computer and went to log into ichat, it acted like I had never logged into the program before, asking me to enter my screen name and password. I then went to go into mail and it did the same thing asking for my email address and outgoing mail servers. I decided to shut down my computer and when I logged back on, the my background image disapeared and the dock had reverted back to its original state. All my other programs do not recognize my previous preferences and my keychain is nowhere to be found in my applications menu. My documents and saved pictures, along with my itunes music is still intact, but the rest of my computer is reverted.
Is there any way to fix this and get my computer back to my personal settings? How do I get my keychain back?
I really need help!!

Hello linty242,
First of all, Welcome to Apple Discussions Forums!
Did you happen to rename your Home Folder? If so have alook at Dr. Smoke's (of the X-Lab) FAQ found at:
http://www.thexlab.com/faqs/renamehomerecovery.html
Read and fully understand the advice found there before proceeding.
If this is not the problem post back here,
littleshoulders [:-)

How do I reset my new MBA to its original factory setting?

I just purchase a 13" MBA 2011 and during set-up I somehow enabled the MBA to share everything on my iMac. How do I return the MBA to its original state out of the box so that I can redo the setup process and not have to share every program that my iMac has? Thanks a bunch!

When I had this situation, I made a specific back up on time machine and used that version as a basis of configurating my MBA.
hope have helped,
Ricardo

How do I restore an image back to its original form?

Is Aperture 3 supposed to be non-destructive? If so, how do I restore an image back to its original form? I'm out of undo's and I need to get rid of some stuff.

You have a few choices here
1. The "m" key will show you the master image without adjustments, not remove them;
2. Right click an image and using the contextual menu, select reset all adjustments, removes them;
3. Same menu, create new version, allows you to have multiple versions each with unique adjustments, B&W, cropping etc.
HTH
Tony

My iphone was restored to its original state and I lost all of my contacts and applications... any ideas how I can get it back??

My iphone was restored to its original state and I lost all of my contacts and applications... any ideas how I can get it back??

Why did you restore without transferring your music to your computer?
If you are in the U.S., then you can use the newly released beta version of the cloud to get your music.

My mac book pro colors have turned brown instead of blue how do I get it back to its original state?, My mac book pro colors have turned brown instead of blue how do I get it back to its original state?

How do I turn the colors back to the original colors that came on the MacBook. Somehow all of my colors look to be disorganized for instance blue is gold etc. I am not sure how this happened but I really would like it fixed any suggestions?

Your first choice is to go to System Preferences>Displays>Color. Make sure that your profile set is the appropriate one for the MacBook Pro, which should be "Color LCD".
I'm going to skip all of the normal suggestions of resetting this and that, because from what I've researched this in the past, and it appears you have an issue with either the graphics chip (low probability) or a worn cable causing one of the color channels to be bad or your LED screen has a problem.
In other words, it's probably hardware related.

How to revert a database back to one day previous state.

Hi,
Of course, if no backup, then no restore.
However, unfortunately there is NO database backup available i.e. export/expdp/OS Backup/RMAN/Flashback. But, the requirement is to prepare another database on another server with one day back state. So, can we take fresh backup of the database which has all the archived logs, and restore it on another server as one day back previous state.
Is there any possible way to do this by using existing archive logs? Can LogMiner help in this regard?
Thanks,
SYED.

user3514623 wrote:
Hi,
Of course, if no backup, then no restore.
However, unfortunately there is NO database backup available i.e. export/expdp/OS Backup/RMAN/Flashback. But, the requirement is to prepare another database on another server with one day back state. So, can we take fresh backup of the database which has all the archived logs, and restore it on another server as one day back previous state.
Is there any possible way to do this by using existing archive logs? Can LogMiner help in this regard?
Technically you could get lucky - but I wouldn't want to pretend that the following procedure is sensible or a safe way to back out a production system.
If you have all the archived redo logs since the moment you want to get back to then you could, in principle, copy the database, run up logminer and extract all the UNDO_SQL that it gives you from the present back to the point in time you want to get to. You can then apply this, one transaction at a time, in reverse order of original application.
Problems I can think of:
<ul>
a) It's likely to take a long time to do this, and you'll probably want to have a lot of manual control and checking.
b) If you've done any drop tables or truncate tables in the interval you can't reverse them out.
c) If you've done any nologging dataloads you won't be able to reverse those out
d) There may be some data types that logminer won't cope with
</ul>
Other people may like to supply more reasons why this is not a good idea for a production system - but it might just be good enough to solve whatever problem you have.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
P.S. on "Forum Etiquette / Reward Points": http://forums.oracle.com/forums/ann.jspa?annID=718
If you never mark your questions as answered people will eventually decide that it's not worth trying to answer you because they will never know whether or not their answer has been of any use, or whether you even bothered to read it.
It is also important to mark answers that you thought helpful - again it lets other people know that you appreciate their help, but more importantly it also means that when you mark a bad or wrong answer as helpful someone may be prompted to tell you (and the rest of the forum) why the answer you found helpful is bad or wrong.

How do I reconvert a pdf back to its original format?

Hello All,
Something strange has taken place when I either download a pdf from the Web, or create a pdf for one of my own proprietary files. Instead of becoming a regular pdf with the Adobe icon, they become a pdf in Illustrator format, with an AI icon. I can open them, but I have to work within the Illustrator format, which only allows one page to be viewed at a time; for example, if I have a 10 page document I have to close Illustrator and then open it again to view each page.
I have tried opening these AI/pdfs in Acrobat and then doing a Save As ... but the document still remains in AI format. What I'm concerned about is that I'm going to upload my portfolio onto a domain site, and that I may have technical problems because the pdfs are not in their original format, but in an AI format.
I have Vista Home Premium and Adobe Pro 8, which is part of my CS3 Creative Suite. Can someone out there give me some guidance on how I can correct this problem? All responses very much appreciated. Thanks.

Hello All,
I have followed your suggestions, and what happens is that there is no
option box to check. I have tried Save As . . . Once I'm in Acrobat, I
think that Save As . . . will reset the program correctly, but it does not.
I still end up with the Illustrator icon on the pdf. I repeat there is no
option box to check within Win Exp. I have Vista OS. Thanks for any
further suggestions to try and correct these file associations. Does this
require a registry cleaner?

Please guide me how to make my laptop to its original state from manufacturer

Good day all!
Awhile ago I had a problem to login. Windows start-up was normal but i couldnt login to my user. So i had to perform start-up repair but still my bootmngr was corrupt. some file was missing. I had to format it with regular copy of windows 7 boot cd. I performed quick format for only C drive wich contains OS. Recovery drive (D) and HP tools(H) drive all were untouched.
After the format i installed all drivers but I cant use my laptop as it was like before (from manufacturer). Before I did factory restore(reset) using files from recovery drive.
Now I cant do factory reset even i have recovery drive.
How i can make my laptop (OS and all keyboard and touchpad settings) as it came from manufacturer.
Now i cant use even my biometric.
Any Ideas.
PS : Recovery drive has all 21gb and its 2 gb free. as it seems all factory data is there. But i cant do factory reset from now installed windows 7 home premium 64 bit

If you set the recovery partition to active by use of Windows 7 Disk Management mmc, you should be able to boot to the HP Recovery Manager and preform a factory image recovery. (mmc = Microsoft management Console)
Click on the Windows Orb and type in disk management. Click on the icon that appears to use the disk Management mmc.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Pictures was block how can i retrive it or back ot its original settings?

its started went i want to erase one of the tag pictures for me,i want to delete it because i dont know that person.but i dont have the way to erase so i decided to block it.unfortunately all my pictures in my albums was not viewed by myself.how can i back it to original settings?thank you and more power!

*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Open the Media tab of the "Page Info" window.
*Select the first image and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.
*You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
See also [[Images or animations do not show]]

How to import a user schema to its original state

Hi,
I had a task to export user schema 'USER01' with all the objects of the user, export was successful when I executed this statement.
$expdp USER1/PASS1@PD01 DIRECTORY=user1exp DUMPFILE=USR01.dmp SCHEMAS=USER1 LOGFILE=USR01.LOG
After which I dropped USER01 and tablespace USER01.
how can I import usr01.dmp so that I can have all objects of user as it was before export and dropping the user.
$impdp USER1/PASS1@PD01 DIRECTORY=user1exp DUMPFILE=USR01.dmp FULL=y LOGFILE=impfullusr01.log
will this statemnet work to import.
Thanks,
Ven

Hi,
Just two notes I'd like to share:
1 - If the user that is running the export job is prived, then the export dump file will contain the statement to recreate the schema, if it is not prived, then this statement will be missing.
2 - you ran a schema mode export which never includes the create tablespace statement.
So, you said that you dropped the schema and the tablespace. Minimally, you will have to create the tablespace where the objects existed. You may also have to create the schema if the export dump file does not contain that information. So, based on now the export was done, you will have a slightly different import command:
1. if export was from a prived account, you don't have to create the schema. If you want the data pump do create the schema, you need to run the impdp from another schema that is prived. This import job will create the original schema and all of the objects in the dumpfile.
2. If export was from a non-prived account, you will have to create the schema and then you can run the import from either the schema you just created, or from a prived schema.
Hope this helps.
Please let me know if you have other questions or if this was not clear.
Dean

How Can I Get Safari Back to it's Original State?

I recently noticed Safari taking up an amazing amount of memory. If I opened 5-10 tabs activity monitor would show that all memory was used, and safari would slow to a crawl with beach balls left and right. I thought Safari was simply a memory hog. But the other day I decided to create another user account and use Safari in the same way I use it on my original account.
On the new account I opened 5, 10, 25 tabs and I still had plenty of memory left over. So I'm guessing something I did with Safari, an added extension or something, is causing the memory link. I thought about simply switching to the new user account, but that would take a lot of work. Instead, I'd like to 'fix' Safari in my main user account. I know I can uninstall all extensions, but what else can I do to get Safari as close as I can to it's original state, and hopefully fix the memory issues.
Any help would be greatly appreciated! Thanks

But the other day I decided to create another user account and use Safari in the same way I use it on my original account.
When the same problem exists in multiple user accounts, the startup disk may need repairing.
Launch Disk Utility (Applications/Utilities) Select your startup disk in the panel on the left then select the FirstAid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the startup disk needs repairing, follow the instructions here.
http://support.apple.com/kb/HT1782?viewlocale=en_US

HR Self-Service Pages have been reverted to its original state

Hi,
I just want to ask, what are the possible causes when the pages has gone to its original state?
A couple of days ago, I had a couple of fields rendered to false (Assignment Page: Location, Grade, Payroll, Probation Period, etc) but suddenly everything is now being displayed. My added fields are still there but it is now sitting at the bottom when it should have been at the top.
Now, I have to set all the unnecessary fields to false and re-arrange my fields. Very time-consuming!
I hope somebody can at least help me investigate who was culprit.
Thanks a lot,
N
Edited by: pekochan on 4/08/2010 16:34

Hi Pekochan
Check if this link helps
http://ramaatoracleapps.blogspot.com/2010/03/migrate-oa-framework-personalizations.html
Thanks
AJ

How to revert VMWare RAC OBE toolkit to its original state?

Similar Messages

Maybe you are looking for