How to review functional specs and what are points need to prepare

Hi ,
how to review functional specs and what are points need to prepare as questionaire..please do needful help

Hello
It seems you haven't had a chance to view the forum [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] yet. I have provided the direct link for you.
Please share SAP PI technical specs
Please familiarise yourself with the Rules of Engagement. This thread is being locked.
Regards
Moderator

Similar Messages

  • I am freeing up some space and am using osx lion, but i have 12gb of back ups, how can i delete these and what are they?

    I am freeing up some space and am using osx lion, but i have 12gb of back ups, how can i delete these and what are they?

    Gotcha.
    Back-ups are what they are: a safety copy. If you feel you don't need them, you can trash them. They could be of a previous System if you upgraded, or something else. You wont get the full picture from looking at system profiler.
    You may want to look into getting an external drive and offloading some stuff to it.

  • Hello, i currently run 10.5.8 and would like to upgrade to enable me to pair my phone with my mack, how do i do it and what do i need to buy ?

    hello i currently run 10.5.8 and would like to upgrade tp pair my i phone and stop e-mail probs,  how do i do it and what do i need to buy ?

    You first need to purchase and install OS X 10.6 Snow Leopard.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Also, it wouldn't hurt to increase the RAM in your iMac.
    Your year and model iMac can take 4 GBs of RAM. Out of that amount of RAM, the 2006 iMac will recognize between 3.1 and 3.4 GBs of that total RAM.
    Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
    Once OS X 10.6 is installled , you will need to use OS X Software Update function in OS X's System Prefernces Panel to update to OS X to OS X 10.6.8. This will give your iMac access to the Mac App Store.
    If you wish, your iMac year and model can only be updated to OS X 10.7 Lion. Your hardware limits you to OS X 10.7 Lion. Your iMac can't run or install OS X 10.8 Mountain Lion OR OS X 10.9 Mavericks.
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    My strong advice is that you keep your iMac model on OS X 10.6.8 Snow Leopard. OS X 10.7 Lion needs a full 4 GBs of RAM, for the OS alone. Your Mac barely meets this requirement and will leave no additonal RAM to efficiently run any additional application without severly slowing down your iMac.
    Before embarking on a OS X system upgrade, it would be very prudent to back up all of your important, personal data, beforehand.
    You can choose just to backup the most important data by either burning data to CDs/DVDs, or copying data to large capacity USB flash drives.
    The two better methods is to purchase a good quality external hard drive and backup the data and OS using OS X's Time Machine app to back your data up to an externally connected hard drive.
    The other method is to backup your entire system and data using data cloning apps such as Carbon Copy Cloner or Super Duper to clone an exact copy of your iMac's internal hard drive to the externally connected hard drive.   Cloning data to an external drive will give that drive the ability to boot from in an emergency. Your Mac will be able to be booted and run off of an external drive.
    The type of connection of an external hard drive is yours to choose. The two types of data transfer connections your Mac can use are USB 2.0 or FireWire 400/800.
    If you want a hard drive that has a faster, continuous throughput of data and the possibilty of running your iMac from an external hard drive (in the event your Mac's internal hard drive fails or data becomes corrupt and your Mac system won't boot to the Mac's internal drive) opt for a FireWire drive. If none of this is important to you, then get a hard drive that uses a USB 2.0 connection, instead.
    Good Luck!

  • How to use Smart cut and what are the restrictions to use this

    Hello,
    How to use Smartcut and what are the restrictions to use this.
    is it possible in version 9.
    and is it safer to use it in real iproject mplementation?
    Thanks in advance

    Hi
    read more about smartcuts here http://download.oracle.com/docs/cd/E12825_01/epm.111/bpmui_admin.pdf
    read "Managing smartcuts"
    Regards
    alexander

  • Colorblind red/green, how does that affect PS and what are the options.

    Like so many men, I am Colorblind (not in full) for red/green.  As a photographer I manipulate pictures like all of us. My main tools are LR-3 and PS-5.
    I operate in the Pro-Photo colorspace on am Imac with a Eizo graphical monitor all calibrated.
    The problem arrises when I start to work on skin and other elements, as I am coloblind (partial) my manipulations tend to result in a bit to redisch pictures. A comment I receive many times.
    I don't see it that way, but after a colorblindness test it was comfirmed.
    So here is the question:  Is there a tool/colorprofile/colospace or whatever that could be used by me as a red/green colorblind person so that I can manipulate the pictures as I would like to.
    The colorprofile/space/tool would compensate.  Once done with the job I could then simply convert it back to a normal human view.  Does this exist ?
    Note that I always work with graycard and a ColorChecker from X-rite..
    Any recommendation is more then welcome.

    Interesting…  If I understand the issue correctly, you need the opposite of this:
    This shows a person with normal vision how an image will look to a color blind person.  I can see how the opposite may pose quite a challenge for the programmers. 
    Wo Tai Lao Le
    我太老了

  • How to write Functional Spec s for Duplicate and Postal Check for ELM

    Hi Guru s
    Can any one guide me how to write functional specifications for Duplicate Check and postal Check for ELM kindly share information on this.
    Thanks & Regards,
    Prasanna

    Hello Jaya,
    I would say that there are many ways to write a FS. Maybe every big company has its own template. As it is the functional spec and not the technical one, I would say that you only need to describe what you want to see on the screen (like with mock-screenshots) or which functionality you want to have from a super-user''s point of view. All the technical details like which database table or function modules need to be investigated by the developer or technical consultant. I am currently in a SAP CRM Service in the technical role and that is the way we work here and I am fine with that. Unfortunately I am not allowed to send you an example.
    Best regards,
    Thomas Wagner

  • HT201407 hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help

    hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help me.thank you

    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818
    hannibalfromlemery wrote:
    .I cant activate my Iphone 5. I bought this from someone
    The Apple ID and Password that was Originally used to Activate the iDevice is required.
    If you cannot get this information from the seller
    Removing a device from a previous owner’s account
    You need to return the Device for a refund, as you will not be able to re-activate it.

  • My iPhone was stolen and I have contacted the police who are using the meid number to locate.  How does this work and what are my chances of getting the phone back?

    My iPhone was stolen.  I used Find My iPhone app to lock it and display a message.  The phone has not connected to the internet to locate it.  I contacted the police and they have taken my meid number.  How does this work and what are my chances of getting the phone back?  Are there other ways the theif can use it.  I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

    Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
    The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes.  If they do that, they'll probably keep him under surveilance for a year or so before they act.
    Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
    I'm sorry, but that's the way it is.

  • How many types of tables exists and what are they in data dictionary?

    hi,
    How many types of tables exists and what are they in data dictionary?
    regards.

    Hello Liu,
    Please search in forum before posting any question .
    anyhow check the below link :
    http://web.mit.edu/sapr3/dev/sap_table_types.htm
    Thanks
    Seshu

  • I just purchased an extreme.  I have an express.  The sales guy recommended setting up a hot spot with the express and use the extreme as a base station.  What does he mean and how do I do this?  What are the advantages?

    I just purchased an extreme.  I have an express.  The sales guy recommended setting up a hot spot with the express and use the extreme as a base station.  What does he mean and how do I do this?  What are the advantages?  How do I set this up?????

    I think he means to set up the main extreme as the main router or "main base station", and then use the express to "extend" the network.
    You can look up the manual for your express here for more details:
    http://support.apple.com/manuals/
    Extend the range of your network by adding AirPort Express to your existing AirPortExtreme or AirPort Express wireless network (this is called a Wireless DistributionSystem, or WDS). "
    Extending the Range of an Existing AirPort Extreme or
    AirPort Express Network
    You can extend the range of an existing AirPort Extreme or AirPort Express wirelessnetwork by setting it up in a WDS. Wireless computers can connect to the network andshare the Internet connection, share files, and play network games. If you connect yourAirPort Express to your home stereo, computers on your wireless network can useAirTunes to play music on the stereo from iTunes. If you connect a USB printer to yourAirPort Express, all of the computers on the network can print to it.
    n Open the AirPort Setup Assistant on a Macintosh, or the AirPort Express Assistant on acomputer using Windows XP. Follow the onscreen instructions to extend the range ofyour AirPort Extreme or AirPort Express network.
    Note: Extending the range of a network using WDS may reduce overall networkperformance.

  • RAID: What is it and what are the benefits and How to Setup?

    I was wondering what RAID is? How do you set it up? And what are the benefits of having dual hard drives setup in RAID?
    I have a powermac G5 (quad 2.5ghz/16gb RAM/80gb SSD & 1tb HD) and I want to setup my SSD and HD in RAID...would that be wise? Thanks guys!

    Hi-
    One of the best ways to reduce a RAIDs performance is to mix drives.
    Mixing dissimilar drive types should be a shortcut to disaster.
    I would rethink the drives to use for a RAID.
    The most reliable RAID will be from RAID certified hard drives of the same make and capacity.
    After that, you get into software RAID vs Hardware RAID, which both have drawbacks, the latter being price due to the required controller cards and external housing needed for all the drives.
    Hardware RAID will allow for better performance, and allow for use of a RAID 5 or RAID 6 to build in redundancy to protect in case of a drive failure within the set, without losing the entire set.
    A SSD RAID can really offer some blistering speeds.
    I think possibly a bit much for a G5.
    With software RAID, a two drive RAID 0 as scratch for video or graphics work can greatly increase render performance of those respective softwares.
    A two drive boot RAID 0 with 2 WD Velociraptors can increase OS X responsiveness.
    All two drive RAIDs suffer from the need for a robust backup, making a third and fourth drive needed to create a RAID 0+1.

  • How To Handle Tickets and What are those

    Hi Everybody,
    Can anybody tell me, How to handle tickets and what are those.
    srinivas

    Hi,
    Tickets are basically assocaited with Production support type of work.
    Tickets are nothing but the medium through which problems reported either in the system or by users to the Production support team.
    There are certain problem management tools that every organization uses (tickets are created and worked on using those tools). There are tools like Vantive, Remedy, CASE, etc.
    Usually the helpdesk gets the first contact for any user problems and then they log a ticket with the appropriate support teams. The support teams then pick up those tickets and work on them till they are resolved. There are tickets created for user problems or any batch job failures, system failures, etc.
    Tickets are usually classified as Critical, High or Low and again they are categorized as High Severity, Medium Severity or Low Severity. All these types of tickets have SLAs (Service level agreements) for the Support teams to respond and the resolve the tickets in.
    Look at the threads below for similar posts :
    tickets
    Tickets
    tickets
    Cheers,
    Kedar

  • Tables: CATSDB & AFRU - How are they filled and what are there purposes?

    Hi,
    In regards to tables CATSDB & AFRU, how are they filled (interfaces, programs) and what are the purposes of these tables?
    I found the interface IF_EX_CATSBW_CUST_ISOURCE for table CATSDB but is this how CATSDB is filled? How about AFRU?
    Please help.
    Thanks,
    John

    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/19/8d38689bfd11d38ea50000e81de309/frameset.htm">CATSDB</a> is usually filled via Time Entry (CAT2) or a BAPI call.
    Arya

  • How to install Oracle 10g on RHEL5 and what are the prerequisite

    Hi All,
    I want to install Oracle10g on RHEL5. I have installed RHEL5 now i have to install Oracle 10g on that. How can i do that?
    What are the prerequisites to do so? Please tell me step by step
    Arif

    please follow :
    http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
    http://asanga-pradeep.blogspot.com/2009/06/oracle10gr2-on-rhel-5oel-5-x8664.html
    RPM packages
    Regards
    Rajesh

  • How to create functional spec. for tds report in sap

    hello ,
    My client wants to develop tds report as per their desired format. the format is like
    DATE OF DEDUCTION/DATE OF CREDIT
    NAME OF THE PARTY     
    SEC     
    COMP/NON-COMP.     
    AMOUNT PAID     
    TDS     
    SURCHARGE(10%)     
    ED.CESS(2%)     
    TOTAL     
    BSR CODE     
    CQ/DD NO.     
    CHAL.SR.NO.     
    DEPOSIT DATE     
    PAN NO.
    I  talked to our abap person.But he said he needs the functional spec to develop the same.But i dont know how to create the functional spec and table join.
    I am very new in sap.If possible then Please help me in this regard.
    thanks&regards
    baishali

    Hi
    In the functional specifications, you need to tell which Tables and Fields should be picked up for displaying the data. Specifically for TDS some of the common tables are WITH_ITEM
    Also look at J1IENMIS. Much of teh information you require is there in the new TDS Report for India, though not exactly in the same order
    Regards
    Sanil

Maybe you are looking for