How to rewind Movie Clip

Is it possable to rewind a movie clip (play it backwards)?
thaks in advance,
Nick D.

this.addEventListener(MouseEvent.MOUSE_DOWN,f):
function f(e:MouseEvent){
gotoAndStop(1);

Similar Messages

How do I move clips from one Event to another?

How do I move clips from one Event to another?
As soon as I got the new iMovie, I started importing clips and making video's. Unfortunately, I hadn't fully understood the Events feature, so all of my clips are in a single "New Event" Event. I have now created several other Events and named them properly and would like to sort all of my clips into their proper "Event" folders. How do you do that?

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.

How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.

Try this:
Select a small portion of the clip in the event (Above the timeline)
Click and hold and drag that section into the timeline, it should snap into place but if you drag it above another clip, it will not replace it but will be placed on top and the sound from the other clip will still play. Also this will allow you to use Blue/Green screen modes as well as picture in picture.
The best way is to drag it to the far right

How do i move clips from home video to roll?

how do i move clips from home video to roll?

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How to control movie clips using mause scroller...?

....please look
http://www.nagaoka-id.ac.jp/gallery/gallery.html
...how to control movie clips using mause scroller...?

Hi Ldavinci, I have noticed your posts on that particular
site before. Just chiming in here... don't be afraid of Flash Help
menu. There's a wealth of information there and I've found it much
faster than waiting for a response from the forum. Then if it still
doesn't make sense, at least you have a basic idea of specifics to
ask.
If you search for mouse wheel, you'll see an example under
the Actionscript 2.0 Language Reference on this topic. That said,
here's the example:

How to resize movie clip dynamically

how to resize movie clip sccording the stage size and width

how to resize movie clip sccording the stage size and width

How do I move clips between projects?

Should be a simple enough task but, how do I move clips made in one project to another project?

clip media is not conained within a project per se, rather it is referenced by a project, so as long as the media is on the hard disc then it can be referenced by as many projects as you'd like.
you can open multiple projects simultaneously ... then to move clips between the projects you can just drag and drop between the various projects' bins, or copy and paste if you prefer.

How can I move clips from one library to another? Clips are still in original drive and not in new drive.

I am using iMovie 10.0.7 on a 1-week old iMac 27" running Yosemite 10.10.2. I migrated from iMovie 9 on a 2008 iMac running Snow Leopard and updated the libraries and events, etc.
I have two external drives connected via USB. I want to move / consolidate the library and clips from one of the external drives to the new iMac's 3TB fusion drive. This is to make room on the external drive to run Time Machine backups.
Apple's instructions on managing libraries and moving/copying clips/events tell me to drag to move between libraries and to Option-drag to copy. However, simply dragging only copies. I find that if I Command-drag the events/clips, I can "move" them. But when I look outside iMovie in the Mac OS X Finder, the event folders and clip files themselves are still sitting in the original drive.
I'm very perplexed as to how to really move the clips and event structure. Should I manually copy the clips and event folder structure outside of iMovie? I worry I will mess up iMovie's internal record keeping and folder structure information.
Thanks in advance.

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How to play movie clips for a certain amount of time only

Hello everyone, I think I have a relatively basic question here but I can't figure it out. I have a movie clip loaded using action script 3 at the start of my animation, I want ito to end at the 120th frame. But I can't use the stop(); command because it will also stop the rest of my animations from the 121st frame onwards. So my problem is, how can I stop the movie clip without stopping the rest of my animations?
Thank you in advance!

I don't think I have codes that load the swf, but I've sent you the code that I would like to stop. Thanks!

How to load movie clip internal in .fla file

Hi - How do I load a movie clip inside a .fla file?........I
know the script to load a .swf file but I do not know the script to
load a movie clip (New symbo l= movie clip) made in the same .fla
file.
I have a series of movie clips I woud like to load with a
button - can anyone please guide me in the right direction with a
script or some info.....
Thanks
steen

Do you mean loading clips that are in the library?
Use MovieClip.attachMovie();
Dan Mode
--> Adobe Community Expert
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
"Jean Bang" <[email protected]> wrote in
message
news:ef88kj$c10$[email protected]..
> Hi - How do I load a movie clip inside a .fla
file?........I know the
> script to
> load a .swf file but I do not know the script to load a
movie clip (New
> symbo
> l= movie clip) made in the same .fla file.
> I have a series of movie clips I woud like to load with
a button - can
> anyone
> please guide me in the right direction with a script or
some info.....
>
> Thanks
>
> steen
>

How to edit movie clip in fla library?

I'm attempting to edit some fla files that have embedded
movie clips. I can't figure out how to edit the movie clip files in
the library. I tried exporting the file to SWC file but can't edit
that.
Can anyone tell me how this is done? Do I need seperate
source fla files that maybe I don't have for the movie clip files?
Thanks in advance for any suggestions.

Thanks for your reply. That's what I would normally do but I
think the original programmers of this site did every thing they
possibly could to make it difficult for a non-expert to edit. I've
edited many flash sites but this one is ridiculous.
I just can't find all the images that make up the movie clip
to edit. I've looked through every layer and double clicked on
everything. I've ran out of ideas.
If anyone wants a challenge I'd be happy to send you the .fla
file just to see what I'm talking about. You can't edit
anything.

How to download movie clips to Mac OS X 10.4.11 from Nikon Coolpix S640?

Hi ~ I have photos and one short movie clip on my SD card. I downloaded all the photos into iPhoto. Since the movie clip was on the same SD card I thought that it would automatically download to "somewhere"? I did find out that it would be a AVI file, I believe. I tried to find it somewhere on my computer but could not. Where did it go?
Luckily, I did not erase it from my SD card. I am wondering how to correctly download this movie.
I have not installed the Nikon software because it overtakes my photos in iPhotos and I had a scare when I thought I lost all my photos. I uninstalled it and my photos reverted back to normal in iPhoto. Who knows, maybe I did it wrong initially. Anyways, I contacted Nikon C.S. and they said if I did not want to use the Nikon software to download with, then the movie clip would be viewable in QuickTime. I could not find it there, either. I hope you can assist.

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/4.0/system-requirements/
For Mac OS X 10.4.11 or Mac OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

Garage Band 10.0.2 - How do I move clips in the editor?

Pretty basic question about Garage Band 10.0.2. I find it difficult to grab and move clips in the editor - the bottom window - as I could in previous versions. Instead, I'm having to go up to the top window to move clips closer together. What am I doing wrong?

Hold down the command key, while you click the region in the track editor and drag it. Don't click the ruler, click the wave shape in the audio region.

How to combine movie clips into one?

In one Aperture project I have 5 short (under 1 min) movie clips that I would like to combine into one "movie", and would like to know the quickest and easiest way to do this. I am not interested in any editing other than combining the clips into one. Thanks!

In Aperture the only way to combine movie clips is to create a basic slideshow, but you will get better results (stabilization, effects, etc) in iMovie or Quicktime 7, if you have it.
In Aperture:
Create a slideshow with the "Classic" theme: Select the two video clips in the Browser and use: File >New > Slideshow
Set the Default Slideshow settings (Transitions, Text, background) as you like them.
Arrange the clips in the Time Line in the order as you want them.
Press the "Export" button in the upper right corner to export a new video. Reimport it to Aperture.
Regards
Léonie

Final Cut Pro X 10.0.8. How to automatically move clips to the left?

I've upgraded to Final Cut Pro X 10.0.8, and there are differences from the earlier ones. How do I set my timeline to automatically move the clips along to the left when I delete a clip in the middle of my timeline?
I can't find an answer to this question anywhere?

The backward delete key should do that, The foorward delete key will insert a gap clip.
Russ

How to rewind Movie Clip

Similar Messages

Maybe you are looking for