How to rewire logic to protools 10hdx

is there anybody who knows how to do this?

ivanleyva02 wrote:
the thing is, i can do it on my macbook using the internal in and out but i can't do it with the hdx, so it has to be a way to make it possible
Can you 'see' the Logic instruments in PTs, send them MIDI from PT, and sync the transports? Routing just audio is 1/4 of rewire.
Not owning hdx, I can't say as to specifics on that, but if all you want is audio I've used soundflower to route that between the two, just to see if it would work.  I've only had limited, unreliable success with MIDI & transport syncing, but didn't really pursue it beyond basic IAC routing.

Similar Messages

  • How I ReWire Logic with Reason 3

    Getting Logic Express 7 and Reason 3 ReWired and working well together took me a few days. Thanks to some very helpful posts here (mostly by users "clangwork" and "mlehmann") and a few other sources I have everything working well. Mostly so I can remember, I wrote down the steps. Hope it helps someone!
    ReWire Logic Express 7 with Reason 3
    1. Start Logic
    2. Start Reason
    3. Reason: create a mixer, Subtractor, and NN-XT (any device is fine, these are for example) and select some patches.
    4. Reason: DELETE the tracks for the devices you made in the sequencer, but KEEP the devices when asked. IMPORTANT!
    5. Logic: open Environment window, set it on MIDI Instr. (on left), and click New -> Internal -> Rewire. Do it for as many devices as you have in Reason. In this example I have two (for Subtractor and NN-XT). Click on a Rewire object and set Device (on left) to Reason and Channel to SubTractor. Click on the other and set Device to Reason and Channel to NN-XT. Bus should be 6 for both. Close the Environment window.
    6. Logic: Click on any track icon and hold the button down. In the pop up menu, select MIDI Instr. and then the first ReWire listed. It should show up on the left as SubTractor 1. Click another track and do the same for the other Reason device.
    7. Logic: Select an Audio track and set the Channel to ReWire -> RW:Mix L. Pan the track all the way to the left. Select another Audio track and set it to ReWire -> RW:Mix R and pan to the right.
    8. Logic: I have no idea why, but for any Reason devices to play I need to set up a Logic instrument (any, such as ES1, etc.) and load a patch. Play one note, then select one of the yellow ReWire tracks and you should hear your Reason device!
    9. Logic: Record to the ReWire tracks like any other MIDI instrument!
    NOTES:
    You can add effects to the Reason rack and don't need to change anything in Logic.
    Set levels, pans, etc. in Reason.
    You can delete a device and replace it with something else in Reason and don't need to change anything in Logic. Reselect the channel for the ReWire track to update the name.
    Mac OS X (10.4.3)

    http://thelocalhost.googlepages.com/settingupreasonwithlogic
    http://thelocalhost.googlepages.com/reasontips

  • How to rewire reason to logic?

    I have reason 4 and logic 8, I watched the 101 tutorials but no explanation on how to rewire. Can someone please explain to me how to rewire reason to logic?

    Try this awesome video tutorial:
    http://www.youtube.com/watch?v=RBGVZZu9Mto

  • For those using Logic and Protools

    This is for any of you out there that use both Logic and Protools in your workflow. What are the reason(s) that you might do this? How do (if they do) these programs augment one another in the process of creating music? From initial idea to final mix, where do these programs plug in and why?
    Thanks in advance

    Andrew Tokuda wrote:
    I hear that there is no automatic Plug-In Delay Compensation in Pro Tools. You need to set a value manually. According to a training video I saw of Pro Tools, this appears to be true. I also hear that PDC still isn't implemented in the version 8.0 release, though I can't confirm that.
    For a guy that's been using Logic for years, I may just be spoiled as far a PDC is concerned, but it seems like for all those missing features in Logic (such as Elastic Time), there are important things we take for granted that aren't available on the PT side. Add the 32-channel (16 stereo!) limit in LE that we rarely think about in Logic.
    That said, PDC and channel limits aside, version 8 of PT seems like a pretty compelling upgrade from 7.x. I hope Apple is keeping an eye on things. If there's ever a serious competition between platforms as far as features go, it starts now.
    -droo
    You're right.
    but the one thing I do like about not having the computer calculate the delay, is that when I am doing my final mixing, I can calculate it myself. this might be a little geeky for some, but in the end it allows me to control this aspect of the DAW that I cannot do in other DAWs.
    I have noticed sometimes in Logic that some things do not get played back at the same absolute timepoint. In other words, i suspect the PDC might be changing upon each playback. This is fine for most music, but when doing either electronica or Jazz (believe it or not) this is not good.
    This has only happened to me once or twice, but is something to note. In PT HD, the delay remains constant, so dealing with it is a one time deal. Set your delays, and you're done.
    Cheers

  • Slaving Logic To ProTools 7

    Hi there,
    i remember reading once that someone had posted that he ran Logic as a slave to protools.
    Here's what I'd like to do
    Hit play in Protool 7 and have logic running to sync in background. Thus monitoring thru protools only having logic doing the midi stuff. I have it running 50% - and i can get it to work but only if using an (Outside Outboard) trigger for Logic and protools. However, I would love to be able to hit Play in protools and have Logic sync in the background. If anyone can help me on how to set this up I'D be a happy man:-)
    Thanks in advance guys
    Steve

    There can be a LOT gained by using this setup...
    Firstly, PT CAN be triggered from Logic. I haven't tried running both programs on the same machine (I've run PT on a slave to the master computer running Logic, and using my audio interfaces to route midi), but PT will recognize any ports that you point to it.
    I love Logic, but Pro Tools handles audio WAY better than Logic does...
    -the audio file naming structure is more hip and advanced
    -audio editing is much better
    -with PT 7, region groups are possible
    -USING MULTI TAMBERAL INSTRUMENTS IS BETTER (one of my biggest complaints about Logic...you can't load a Multi Instrument, like Kontakt 2, and then have MIDI tracks point CC information to discreet midi channels, they all come in on the same channel, which really *****)...also, getting the audio routed back to from the Multi instrument is easier in PT 7....this is really the main reason why I'm even using Protools in my work.
    -Most dubbing stages consider a PT session a desireable deliverable for a dub session.
    -you can load up templates in PT and just have MIDI stuff in Logic, making it a faster load in Logic (especially useful for larger projects with multiple cues using the same virtual ensemble.
    I believe that your assumption regarding audio routing is correct. There's also a program called Racks..you (and I as well) should check it out.
    I LOVE Logic's plug-ins...and I don't have any real plug-ins (like a good reverb) in PT, so I always end up importing back into logic, which stinks.

  • How to use Logical database in function module?

    I will create a function module in HR.
    but how to use Logical database  in function module ?  Logical database PNP always show screen.in function (RFC) code , it is a matter.

    You cannot attach the LDB to the main program of the function group.
    - So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
    - Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
    - Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
    Regards

  • How to determine logical database in a program?

    Hello guys!
    How to determine logical database in a program on Eclipse?
    I have not found any options:
    Thanks!

    Welcome to SDN
    Check the table RSOSFIELDMAP
    Assign points if useful
    Regards
    N Ganesh

  • Does anyone know if apple's one-to-one program would be a good way to learn how to use logic pro or am I better off going to school to learn audio engineering or something?

    Of course going to school would be a good option, but I want to know if one-to-one is also a good way to learn how to use logic pro. Has anyone been through the one-to-one program for logic pro and can say that they learned how to use logic pro well because of it?

    For sure, one to one training, if given by a tutor who is capable, will hand you the means to build up self-confidence  and will therefore let you operate the hard/software in an intelligent manner, instead of going for the trial and error method which has its pro's and con's too. Once you've passed this beginners phase you will make your own decisions intelligently and then you will also start to get experience and learn even from your mistakes. Something like that in theory and the rest is up to you!
    Have a nice day

  • How to store logical operator in an array in java

    how to store logical operator in an array in java.
    Array should not be String type if i pass an element of that array it should be considered as logical operator

    my exact requirment is like this, i need some logic
    to convert string like this "2 Equals 3 AND 4 greater
    than 7" to condition like this
    2 == 3 && 4 >7 which i can pass to if
    condition.So you want to create an expression parser?
    No need for something as ugly as what you think you need, a simple nested conditional will do it for just the few logical operations.

  • Hi how to create logical systems.

    Hi,
       how to create logical systems. Do we need to create logical system name for creating RFC destinations? plz help me out.
    thanks
    dhanush.

    Hi,
    transaction:
    SALE -> Basic Settings -> Logical Systems -> Define Logical System
    No, you don't need to create Logical Systems to define RFC destinations.
    Regards,
    Jakub

  • How to know logical database supports Dynamic Selections

    hi all,
    1. Logical database KDF supports Dynamic Selections
    2. How to know logical database 'KDF' supports Dynamic Selections

    You might find an answer regarding dynamic 'WHERE' statements in standard SAP report SAPDBKDF

  • HOW TO USE LOGICAL AND OR CONDITION TOGETHER

    Please do not post subject in ALL CAPITALS
    Hi All there,
    How to use logical and or condition together
    I wanted to use logical AND OR condition together in where clause of Select Query.
    eg where xyz and or abc
    Regards
    Sagar
    Edited by: Matt on Mar 17, 2009 1:05 PM
    Edited by: Matt on Mar 17, 2009 1:05 PM

    hi,
      You cannot use the logical and  or condition together at the same time in SQL statement. Sachin is correct while using the and and or in the same condition. You can get the data using or condition in SQL statement, and then use the delete statement of internal table using the end condition. please find the following code for the same.
    select *
      from dtab
    where cond1 eq 'A1'
         or cond2 eq 'A2'.
    if sy-subrc eq 0.
      delete itab where cond1 eq 'A1' and 'A2'.
    endif.
    regards,
    Veeresh

  • How to achieve logical operator on [Authorize(Roles = ] in MVC

    For example, I need to make a controller accessible a user with two roles; role "Admin" and "Editor". How to achieve it.
       [Authorize(Roles = "Admins")]
        public class SampleController : BaseController
    How to do logical operator, such as AND and OR (maybe || and &&)
    Thanks!
      

    Hello klouapple,
    Please post your question to ASP.NET forum instead of here.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to call logical database

    hi friends,
        plz explain me how to call logical database in a report program?

    hi,
    Logical databases are special ABAP programs that retrieve data and make it available to application programs. The most common use of logical databases is still to read data from database tables by linking them to executable ABAP programs.
    However, from Release 4.5A, it has also been possible to call logical databases using the function module LDB_PROCESS. This allows you to call several logical databases from any ABAP program, nested in any way. It is also possible to call a logical database more than once in a program, if it has been programmed to allow this. This is particularly useful for programs with type 1.
    Logical databases contain Open SQL statements that read data from the database. You do not therefore need to use SQL in your own programs. The logical database reads the program, stores them in the program if necessary, and then passes them line by line to the application program or the function module LDB_PROCESS using an interface work area.
    Logical Databases - Views of Data
    A logical database provides a particular view of database tables in the R/3 System. It is always worth using logical databases if the structure of the data that you want to read corresponds to a view available through a logical database.
    The data structure in a logical database is hierarchical. Many tables in the R/3 System are linked to each other using foreign key relationships. Some of these dependencies form tree-like hierarchical structures. Logical databases read data from database tables that are part of these structures.
    Advantages of Logical database -
    1) No need of programming for retrieval , meaning for data selection
    2) Easy to use standard user interface, have check completeness of user input.
    Disadvantages
    1) Fast in case of lesser no. of tables But if the table is in the lowest level of hierarchy, all upper level tables should be read so performance is slower.
    GO THROUGH THE LINKS
    http://www.sap-basis-abap.com/saptab.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
    /people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
    Re: **LDB**
    www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
    www.sap-img.com/abap/abap-interview-question.htm
    www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
    Use Tcode SE36 For creating Logical Database.
    Here is a simple Program on Logical database.
    NODES: spfli,sflight.
    START-OF-SELECTION.
    WRITE 'Test Program for GET'.
    *Fetching SPFLI table
    GET spfli.
    WRITE: / 'Carrid:', spfli-carrid,
    'Connid:', spfli-connid.
    *Fetching SFLIGHT table
    GET sflight.
    SKIP 5.
    WRITE: / 'Carrid:', sflight-carrid,
    'Connid:', sflight-connid.
    logical database
    logical database
    http://help.sap.com/saphelp_nw04/helpdata/en/60/183d78163011d2953c0000e8353423/frameset.htm
    general
    example program
    http://help.sap.com/saphelp_nw04s/helpdata/en/9f/db9be035c111d1829f0000e829fbfe/frameset.htm
    regards,
    pavan
    REWARD POINTS IF USEFUL

  • How to create logical system

    Hi,
    How to create logical system.
    Please help me with the steps for logical system creation in R3 system.
    Thanks,
    Kelly

    Hi,
    First make your client modifiable, then follow the below procedure.
    Go to transaction SALE or BD54 -> Sending and Receiving Systems -> Logical Systems -> You'll see "Define Logical System" and "Assign Client to Logical System".
    For more information use below link.
    http://help.sap.com/saphelp_nw70/helpdata/en/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm
    Thanks,
    Mano

Maybe you are looking for