How to roll back to Firefox 3.6 32 bit from Firefox 4 64 bit

I am running firefox 4 64 bit on windows 7. However my remote citrix connection for work needs a 32 bit browser. How can I install a 32 bit version on my PC when my OS is 64 bit?

I can tell by your user agent string that you are using the 32 bit version of Firefox 4.0.1
Your user agent string is '''Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1''', the WOW64 part means you are using a 32 bit version on 64 bit Windows. A 64 bit browser would display win64 instead.
All release versions of Firefox on Windows are 32 bit, though a 64 bit version is being developed.

Similar Messages

How to "roll back" SAP APO PPDS planning batch run from infeasible batch mid-point to before start of planning batch run?

Hi Experts,
We are investigating if any SAP customer that implemented SAP APO PPDS has ever attempted to establish a "roll back" of the SAP APO PPDS created supply plan to a defined point before the start of the SAP APO PPDS planning batch run?
We have a situation where - in the middle of the planning batch run - randomly or intermittent the batch run hangs or runs a step for multiple hours that normally, at most days, takes only a few minutes to run. In a situation like this, the supply plan is not in a state where customer sales orders can be promised (using GATP CTP) or planned orders can be converted to production orders and published to SAP ECC, etc since the plan may be capacity infeasible or simply partial or incomplete.   To not hold the business operations hostage to wait resuming operations (promise customer sales orders, convert and release and execute orders to transfer, deliver, produce, or purchase) for hours or days, we need to find a way back to the original plan right before the nightly PPDS batch planning job started.
We already close all the queues from ECC to APO, thus, no CIF traffic from ECC to APO. We also shut down the customer sales order feed into ECC as normal process for duration of the APO PPDS batch planning run. Thus, functionally, we are theoretically in a situation to simply go back to a PPDS and active planning version save prior to the run. Yet, many more technical and BASIS-related questions remain on how to roll back to a state where the plan was not compromised.
This inquiry is to learn if any other SAP customer has ever established a process to roll back SAP APO PPDS to a previous point in time supply plan to resume operations? Whatever the reasons are, be it after a failed batch run, or any time during the normal interactive plan day.
Additional information about our design and plan:
1. We have a two year horizon supply plan in PPDS
2. We only publish to ECC 14 days worth of planned orders, stock transfer requirements, and purchase requirements
3. We convert planned orders to production orders and release production orders in ECC 2 days before first operation starts
4. We convert PR's to PO's and STR's to STO's in ECC 2 days before execution (ship or submit to vendor)
Any indication where a SAP customer has developed and uses a process to roll back an SAP APO PPDS- planned supply plan to an earlier point in time or version would be helpful to know.
Regards,
Manimaran M.

Hi Manimaran,
Saving in Simulation means in DS board when you click on save it provides you option to save sim version or adopt to active version. If you copy to inactive version you cannot copy back trasaction data specially PPDs orders back to active version again while if you save in simulation you can adope it to active version at any point of time. YOu can adopt simulation version changes to active version using T-code /SAPAPO/CDPSS0
Copying to active version means you copy data from version 000 to some other active version while here results are kept simulation,

How to go back to firefox 4 lost java, plugins & acrobat in 5 firefox4 worked

firefox 4 was working just fine. I'm not sure what happened but it updated to 5 and everything quit working - Java, plugins and most annoying Adobe acrobat.
I try to watch a movie, ie weather channel, and it says I don't have acrobat so I download it and close/reopen the browser and try to watch the same movie and get the same error. I'm fed up. I want #4 back where I didn't have any problems
Improvements aren't worth the trouble if i lose the pleasure of using the program

Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended. Firefox 3.6.18 would be the safer choice.
Here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
As for your registration here on the support site, I don't know how you can delete it. But in the future, just use Google to find answers like this.

How to roll back to the good last vershion where plugins work

how to roll back to the good last vershion that all plugins work ok
as 4.0 freezes with some sites.

You can install previous version of Firefox from [http://www.mozilla.com/en-US/firefox/all-older.html here].
 For installation instructions, see this article: [[Installing a previous version of Firefox]].

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. When I roll back to Firefox 6.0, no problems. Can this be resolved?

Firefox 6.0.1 causes extreme problems with ATI Catalyst 10.x drivers on a Win7 x64 system. Took me quite awhile to identify, but when I roll back to Firefox 6.0, no problems. Once Firefox recognizes this and reinstalls the 6.0.1 update then severe display driver problems occur causing very erratic display behavior and ultimately rendering the system inoperative. The problem appears to occur within a minute or two after Firefox has been opened and it occurs even if Firefox has been subsequently closed prior to the actual event taking place. I have attempted this 6 times just to ensure that the problem was associated with the 6.0.1 update.

On Mac OS, plugins are installed to a common location, usually ''' /Library/Internet Plugins''' for system-wide availability or to '''~/Library/Internet Plugins''' for a specific user. Ref: http://kb.mozillazine.org/Issues_related_to_plugins#Background
Does Java 1.6.0_31 work on Safari or another browser?
I also found the following, in case it helps:
*http://reviews.cnet.com/8301-13727_7-57414869-263/how-to-use-java-applets-in-os-x-after-java-2012-003-update/
*http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx

How to roll back changes made by other user in nwdi?

hi all
my doubt is.
if there are errors in the WD NWDI project (cause developer before me had deleted/ added some of the code which is causing those errors).
how to roll back the code changes which were made by other user.
i think through sync option but when we sync to a earlier date we cant check out the code to make changes.
help me.

thanks rohit.
but if there are changes in the context, i mean if one more attribute is created and it is been used a UI element.
then the above process works.
My doubt is.
src folder(configuration,packages,mimes)
Will these file contain all the code including the context attributes and the mapping informatin and every thing else.
(except Libs)???????
can you plz tell me where the context attributes and mapping informantion and source code and model information are stored (in which folder).
thanks in advance

How to roll back when procedure fails

Hi All,
In my process using procedures i am droping the temp tables and creating temp tables ,if any procedures fails how should roll back all the process
Procedure1(droping tables)----->procedure2(creating table1)--------->procedure3(creating table2)------->procedure4(Validaating accounts in table2 and creating seperate table)
Any suggestion please
Thanks in Advance

Let's say in your package you have your 4 procedures (Proc1, Proc2, Proc3, Proc4).
Also create 3 additional procedures:
RollBack1 -> Does the opposite to Proc1 (i.e. if Proc1 drops a table, then Rollback1 will create it)
RollBack2 -> Does the opposite to Proc2
RollBack3 -> Does the opposite to Proc3
Your logic will be:
If Proc1 is successful, then execute Proc2.
If Proc1 is unsuccessful, then end.
If Proc2 is successful, then execute Proc3.
If Proc2 is unsuccessful, then use an on failure path (red line) to execute RollBack1.
If Proc3 is successful, then execute Proc4.
If Proc3 is unsuccessful, then use an on failure path (red line) to execute RollBack2, followed by RollBack1.
If Proc4 is successful, then end.
If Proc4 is unsuccessful, then use an on failure path (red line) to execute RollBack3, followed by RollBack2, followed by RollBack1.
It mightn't be necessary to undo everything - but you'll know your own business needs to make a decision on that.

Downloaded Yosemite but installation not finishing. Now Mac is frozen. Any idea how to roll back to earlier version?

Downloaded Yosemite but installation not finishing. Now Mac is frozen. Any idea how to roll back to earlier version?

i have the same issue, really not happy, if i get an answer i will share with you.mark

How to roll back from Firefox 29?

Existing thread has been closed.
I want to say that I too hate version 29. If I wanted Chrome I'd just use Chrome. The whole reason I use Firefox is that I prefer its interface and operation. At least I used to.
It's no use you telling me or anyone else that 'it's not like chrome' or that I might just not like the 'appearance'. It is 'like' Chrome and I don't like the appearance. The problem is also the ergonomics - I find it much easier to use tabs at the bottom, MUCH easier to use 'back" and 'fwd' buttons where they used to be, much easier to use square tabs, much better to have a forward button that is always present (even if dimmed) than a tiny thing you have to aim for like an archer, and that is sometimes there and sometimes not. It's much more difficult to find the tiny refresh button located in a place that doesn't suit me - why not have all the commonly used controls over there on the left where they are all in the one place and your poor overworked brain doesn't have to think "Oh yes I'm looking for the 'x' button so I'll look in the place that logically makes sense in the 'x' area" -- which sounds good, but it actually much harder than "I want a control, I'll head up to the top left where the controls are ... ah there it is".
This new layout is a triumph of overthought and a basic lack of understanding of how 'normal, non-tech' people work.
The end result is ergonomically poor, no matter what the many studies and much research says.
And why the need to change in the first place? Many of us use FF because it was what it was, and we liked it. What's with the need to change for no reason? If it works, stick with it.
The whole thing looks like a poorly thought out response to 'we need to update because other browsers look cooler/sexier/more curvy/something than ours, so let's update'.
Someone at Mozilla needs to appreciate that change is irritating in itself, requires substantial input from the user, and therefore should ONLY be used when there is a compelling reason. Which there isn't.
Gah :(

I would not recommend downgrading Firefox. Unsupported versions are not secure. You increase risks to your System and Personal data by using insecure software. When security fixes are released and publicised that also publicises the potential exploits.
* [[Install an older version of Firefox]]
* https://www.mozilla.org/security/known-vulnerabilities/firefox.html
Try the new design, if it does not grow on you there are ways to make it more like the previous version.
* See [[Learn more about the design of the new Firefox]] [[Common questions after updating to the new Firefox]]
* [[How to make the new Firefox look like the old Firefox]] https://addons.mozilla.org/firefox/addon/classicthemerestorer/
'''One of the developers recently posted this explanation'''
[https://support.mozilla.org/en-US/user/1079955 MikeDeboer] said
Each setting you see in a computer program you use requires work; when a developer wants to build something new or improve something, he or she has to go through each related (hidden) setting and test if it still works like before and do that on each platform Firefox runs on. That's Apple's Mac OSX, various flavours of Linux and various flavours of Windows, including Windows XP. This costs time, lots of it, and that amount grows exponentially with each setting that's added. This comes on top of our work to continuously fix, improve and innovate Firefox. That's why we also removed the tabs.onTop preference. Awesome community members, who were unhappy about that change, created the Classic Theme Restorer add-on. They deserve our collective hugs.
*'''For more linked help articles and the full quote please also see''' ''Why have you changed design in new Firefox 29.0?'' [/questions/998084#answer-566525]
Are you having any particular problem ? We may be able to suggest a workaround.
'''Have your say. Note Firefox 29 is to some extent work in progress.'''
People helping here are mainly volunteers and users of Firefox like you and I. If you feel strongly about the new changes I would suggest you make a short comment and provide feedback on https://input.mozilla.org/feedback for the people who decided on the changes to actually see it.
Personally one of my major gripes is that the upgrade happens without prior warning of major changes, and then we are left in a changed Firefox trying to find out what works still. Sure the new features can best be demonstrated from the new version, but some prior warning with a chance to read up about the changes would surely help.
* As mentioned in ''Firefox 29 screw up - Please consider USERS How to fix this???'' [/questions/999831]

How to "roll back" to Flash 9?

I discovered a problem with printing uclick puzzles. This occurs on both Safari and Firefox. I am told by uclick that it is a problem with Adobe flash 10 and they are working on the problem. They suggest that I "roll back" to a previous version of Flash. I have no idea how to do it. Can someone help?

I followed your directions as I indicated and all was well. However suddenly the problem has happened again. I believe since the last issue I have installed the latest version of Firefox 3.0.11 and therefore I went to re-install Adobe Flash 9. This time it will not let me since it says I have a later version on my computer. How do I uninstall Adobe Flash 10?

I don't know much about computers but I downloaded firefox 8 after having 7 and now I can't get my paycheck info. on 8 like I did on 7. I would like to know how to get back on firefox 7

I would like to get rid of firefox 8 and go back to firefox 7 and I don't know how. P.S. for a firefox 7 for windows desktop.

Firefox is a web browser like Safari, it doesn't do photo editing.

How to roll back to Acrobat Standard XI from Acrobat Standard DC Cloud

Hi,
How do we roll back/install Acrobat Standard XI from Acrobat Standard DC using the cloud? as we need to use Acrobat Standard XI?
Thanks,
Mike

Hi Michael,
In order to rollback & install Acrobat Standard XI from Acrobat Standard DC please follow these steps.
1) Completely uninstall Acrobat DC standard.
2) Restart your computer.
3) Install Acrobat XI standard using this link Download Acrobat products | Standard, Pro | DC, XI, X & serial it using the serial number for your Acrobat XI Standard or the Adobe ID.
In case if you experience any issue please let us know.
Regards,
Aadesh

I have rolled back to firefox v3.6.19 as v5 does not support 'no script', 'download status bar', or 'forecastfox', or at least i was unable to get them to work. v5 is no good imo.

For the second time in as many months I have had to roll back to version 3.6.19 as the new firefox (versions 4 or 5) was unable to use 'no script', 'forecastfox' or 'download status bar'. I hope mozilla will continue to support v3.6.19 until my issues have been resolved. Also the after one or two clicks on any of the aforementioned extensions on the add-on bar/page caused v5 to hang.

Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

How to roll back Java - I need WebEx.

I installed the Java for Mac OS X 10.6 Update 8. Since that time I've had problems with WebEx and a file transfer site I use.
WebEx gives me a "Sorry, you do not have java download client enabled." everytime I try and start or join a meeting in Safari, Chrome, and FireFox. The file transfer site won't let me log in using either Safari or Chrome. I've been able to log in using FireFox, but I haven't tested if everything is work all right.
I went to the Java preferences app and changed the order or 32/64 bit. I also thought perhaps some cached files could have been corrupted so I deleted the cached files. But other than that it doesn't seem like there is anything there that does much.
I tried googling, but there are too many hits with the word java in them that I can't find anything recent that is on point.
So does anybody else know what to do about this?
Is there a way to roll back to Mac OS X 10.6 Update 6 (I link that is 10.6.0_29)? Can I extract that from my Snow Leopard DVDs?

Okay so I tried it out and that didn't seem to fix the problem. My guess is more this:
http://glenndcitrix.wordpress.com/2012/04/13/re-enable-java-downloads-in-mac-os- x/
However my Java Perferences app doesn't have the "enable applet plug-in and web start applications" check box. Is it because I'm still on Snow Leopard? Is there a way to do this through the terminal?

How to roll back IOS8 to IOS7 on IPHONE4s

Is it possible to roll back IOS8 to IOS7 on a IPHONE4s? If so how is it done.

I hate to bring bad news, but actually, it was possible for a few days after the release of iOS 8. Apple stop signing previous versions by the 27th, so now we are all stuck with iOS 8. When iOS9 breaks your phone and cripples some of your apps, remember that you CAN roll back to the previous version of iOS but you have to do it within a couple of days or so.
Sorry. I'm actually in the same boat and can't use some music apps until the developers upgrade.

How to roll back to Firefox 3.6 32 bit from Firefox 4 64 bit

Similar Messages

Maybe you are looking for