How to rollback RBS and what happens to existing data

Let's say I am using Remote Blog Storage (RBS) in one of my content database and I decide not to use anymore.
1. How can I roll back RBS?
2. What will happen to my data and how can I migrate it from RBS to how SharePoint/SQL Server stores it normally in database?

There's a few blogs around with steps such as this one:
https://alipka.wordpress.com/2010/06/19/how-to-disable-rbs-in-sharepoint-2010/
I'd tackle it in several steps.
Make sure that no new content is being externalised
Move existing content back into the database
Remove old connections
Or i'd just try doing backup and restore operations for site collections to clean databases that don't have the RBS configured.

Similar Messages

I'm still confused!!! How does it work and what happens to...

I have spoken to peeps in apple store as well as apple support but its like talking to geekbots. I have a mess of a music collection on at least two devices and a hard drive. If I purchase iTunes Match what exactly happens?
Do I sign up on my m/mini then later log in from macbook and iT/Match will automatically find the additional songs that are on Macbook and upload them too increasing my overall collection?
How does it improve the rate to 256? Is that only when lstening to streamed music or does it upgrade the songs on my hard drive?
It feels like something that was thrown out there but not fully explained, no wonder I don't know a single person that has subscribed

yerpal wrote:
Do I sign up on my m/mini then later log in from macbook and iT/Match will automatically find the additional songs that are on Macbook and upload them too increasing my overall collection?
Yes. Be sure and do one computer at a time and do not enable iTM on any iOS devices until both computers are finished with the initial scans.
yerpal wrote:
How does it improve the rate to 256? Is that only when lstening to streamed music or does it upgrade the songs on my hard drive?
If the song is "matched" then you delete the version that is your iTunes library, but not from the cloud, and download the matched file. Nothing is done automatically.
yerpal wrote:
It feels like something that was thrown out there but not fully explained, no wonder I don't know a single person that has subscribed
See this page on the Apple web site for more info: http://www.apple.com/itunes/itunes-match/

My mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

my mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

Once something similar happened to me. The external drives I had set up for FCP to use for some reason were not mounted, and FCP put all its render files on the main drive and I couldn't find them anywhere.
Go to applications, and control-click (and hold down) on your FCP icon; you should get a pop up menu that says "show package contents". Select that, select the "contents" folder, then the "mac OS" folder. See if your quicktime file is in there, or if you've got render files in the "render" folder or audio render files in the "audio render" folder that don't belong there.
That's where FCP sticks stuff when your documents FCP project folders are not available or when external drives you've selected aren't available.

My iPhone was stolen and I have contacted the police who are using the meid number to locate. How does this work and what are my chances of getting the phone back?

My iPhone was stolen. I used Find My iPhone app to lock it and display a message. The phone has not connected to the internet to locate it. I contacted the police and they have taken my meid number. How does this work and what are my chances of getting the phone back? Are there other ways the theif can use it. I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes. If they do that, they'll probably keep him under surveilance for a year or so before they act.
Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
I'm sorry, but that's the way it is.

I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

You just need a powered hub.. if you already use one then fine.
Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
Pick whatever size suits.. nowadays 2TB are most economical.
WD, Seagate have goobled up all the minor players.. so pick one.
Whatever suits your budget and asthetics.
NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

I recently downloaded Parallels 9 to my imac so I could install Windows 7 Home Premium and had no trouble everthing is working fine the only question I have is is there a benefit to migrating the 2 together and what happens when I do Thanks. Ricco

I recently downloaded Parallels 9 to my imack so I could install Windows 7 Home Premiumwith no problem and everthing is working fine, and I was thinking of Migrating the 2 2 and was wondering what benefits there would be and what happens when I do.

Windows 7 will peer down through the VM and remember what hardware the VM is installed on. Migrate the VM to different Mac hardware, and on first boot, Windows 7 will advise you that you are not using genuine Microsoft Windows. It will then treat you as though it believes you misappropriated it.

How many types of tables exists and what are they in data dictionary?

hi,
How many types of tables exists and what are they in data dictionary?
regards.

Hello Liu,
Please search in forum before posting any question .
anyhow check the below link :
http://web.mit.edu/sapr3/dev/sap_table_types.htm
Thanks
Seshu

How do I find out how to use cloud and what does it exactly do?

I Am new to Apple and just not sure how this iCloud works and what does it do.

Read here:
http://www.apple.com/icloud/
Basically it is a storage area on apple's servers that lets you keep a backup of your device to restore from in case you need to.
It also has additional features for your media content and other services.

I have imported a csv from my mortgage repayments, my father and I pay seperate amounts. I am trying to show how much I have paid vs what he has paid, how much is owed and what % we own.. We are 50/50 on the property

I have imported a csv from my mortgage repayments, my father and I pay seperate amounts. I am trying to show how much I have paid vs what he has paid, how much is owed and what % we own.. We are 50/50 on the property.. Help?

Hi Spears,
I not sure what your actual question is.
Does the CSV file include only your payments? Your payments and your dad's payments as separate items?
Do you want to com[are ongoing payments, or do you want to compare the current totals paid by each? Is the 'we' in "what we own" collective, or individual? DItto for "how much is owed."
Too many loose ends to tie down a clear answer.
Regards,
Barry

I have an battery issue i bought my iphone 4 from U.k. and right now i want replace my batter in India how can i do and what's i have to pay for this

I have an battery issue i bought my iphone 4 from U.k. and right now i want replace my batter in India how can i do and what's i have to pay for this.
Is there any one listening me why apple boys selling this stupid thing which have so poor battery life which gone dead after 3 monts of battrey use.

http://support.apple.com.au/wts/in/
This link gives you the service options for India
They MAY repair it
They WILL charge you
How much ,no idea

How To Handle Tickets and What are those

Hi Everybody,
Can anybody tell me, How to handle tickets and what are those.
srinivas

Hi,
Tickets are basically assocaited with Production support type of work.
Tickets are nothing but the medium through which problems reported either in the system or by users to the Production support team.
There are certain problem management tools that every organization uses (tickets are created and worked on using those tools). There are tools like Vantive, Remedy, CASE, etc.
Usually the helpdesk gets the first contact for any user problems and then they log a ticket with the appropriate support teams. The support teams then pick up those tickets and work on them till they are resolved. There are tickets created for user problems or any batch job failures, system failures, etc.
Tickets are usually classified as Critical, High or Low and again they are categorized as High Severity, Medium Severity or Low Severity. All these types of tickets have SLAs (Service level agreements) for the Support teams to respond and the resolve the tickets in.
Look at the threads below for similar posts :
tickets
Tickets
tickets
Cheers,
Kedar

Where is my down load and what happened to my older version?????

where is my download icon and what happened to my older version of photo shop???????? i want it back I live in the country and and have dial up at my house I am at a vacation home it has wivi. I am so upset I want my older version back....... this is bull shitl

Taking back to store[<br/><br/>Sent from Yahoo Mail for iPad | https://overview.mail.yahoo.com?.src=iOS]

What is mbpluginhost and what happens if I turn it off?

What is mbpluginhost and what happens if I turn it off?

I Did nothing,
wait for 13-15 minutes, (I know, not my intention tho) the Mac Pro is just optimizing after the software update.
The message box went away and iPhoto started to load, as I was still googling for the Solution.
patience for this one hehehehe.....

How to find Latch and what actions need to be taken when there is a latch

Hi
Can you please tell me how to find Latch and what actions need to be taken when there is a latch?
Thanks
Regards,
RJ.

1. What is a latch?
Latches are low level serialization mechanisms used to protect shared
data structures in the SGA. The implementation of latches is operating
system dependent, particularly in regard to whether a process will wait
for a latch and for how long.
A latch is a type of a lock that can be very quickly acquired and freed.
Latches are typically used to prevent more than one process from
executing the same piece of code at a given time. Associated with each
latch is a cleanup procedure that will be called if a process dies while
holding the latch. Latches have an associated level that is used to
prevent deadlocks. Once a process acquires a latch at a certain level it
cannot subsequently acquire a latch at a level that is equal to or less
than that level (unless it acquires it nowait).
2. Latches vs Enqueues
Enqueues are another type of locking mechanism used in Oracle.
An enqueue is a more sophisticated mechanism which permits several concurrent
processes to have varying degree of sharing of "known" resources. Any object
which can be concurrently used, can be protected with enqueues. A good example
is of locks on tables. We allow varying levels of sharing on tables e.g.
two processes can lock a table in share mode or in share update mode etc.
One difference is that the enqueue is obtained using an OS specific
locking mechanism. An enqueue allows the user to store a value in the lock,
i.e the mode in which we are requesting it. The OS lock manager keeps track
of the resources locked. If a process cannot be granted the lock because it
is incompatible with the mode requested and the lock is requested with wait,
the OS puts the requesting process on a wait queue which is serviced in FIFO.
Another difference between latches and enqueues is that
in latches there is no ordered queue of waiters like in enqueues. Latch
waiters may either use timers to wakeup and retry or spin (only in
multiprocessors). Since all waiters are concurrently retrying (depending on
the scheduler), anyone might get the latch and conceivably the first one to
try might be the last one to get.
3. When do we need to obtain a latch?
A process acquires a latch when working with a structure in the SGA
(System Global Area). It continues to hold the latch for the period
of time it works with the structure. The latch is dropped when the
process is finished with the structure. Each latch protects a different
set of data, identified by the name of the latch.
Oracle uses atomic instructions like "test and set" for operating on latches.
Processes waiting to execute a part of code for which a latch has
already been obtained by some other process will wait until the
latch is released. Examples are redo allocation latches, copy
latches, archive control latch etc. The basic idea is to block concurrent
access to shared data structures. Since the instructions to
set and free latches are atomic, the OS guarantees that only one process gets
it. Since it is only one instruction, it is quite fast. Latches are held
for short periods of time and provide a mechanism for cleanup in case
a holder dies abnormally while holding it. This cleaning is done using
the services of PMON.
4. Latches request modes?
Latches request can be made in two modes: "willing-to-wait" or "no wait". Normally,
latches will be requested in "willing-to-wait" mode. A request in "willing-to-wait" mode
will loop, wait, and request again until the latch is obtained. In "no wait" mode the process
request the latch. If one is not available, instead of waiting, another one is requested. Only
when all fail does the server process have to wait.
Examples of "willing-to-wait" latches are: shared pool and library cache latches
A example of "no wait" latches is the redo copy latch.
5. What causes latch contention?
If a required latch is busy, the process requesting it spins, tries again
and if still not available, spins again. The loop is repeated up to a maximum
number of times determined by the initialization parameter SPINCOUNT.
If after this entire loop, the latch is still not available, the process must yield
the CPU and go to sleep. Initially is sleeps for one centisecond. This time is
doubled in every subsequent sleep.
This causes a slowdown to occur and results in additional CPU usage,
until a latch is available. The CPU usage is a consequence of the
"spinning" of the process. "Spinning" means that the process continues to
look for the availability of the latch after certain intervals of time,
during which it sleeps.
6. How to identify contention for internal latches?
Relevant data dictionary views to query
V$LATCH
V$LATCHHOLDER
V$LATCHNAME
Each row in the V$LATCH table contains statistics for a different type
of latch. The columns of the table reflect activity for different types
of latch requests. The distinction between these types of requests is
whether the requesting process continues to request a latch if it
is unavailable:
willing-to-wait If the latch requested with a willing-to-wait
request is not available, the requesting process
waits a short time and requests the latch again.
The process continues waiting and requesting until
the latch is available.
no wait If the latch requested with an immediate request is
not available, the requesting process does not
wait, but continues processing.
V$LATCHNAME key information:
GETS Number of successful willing-to-wait requests for
a latch.
MISSES Number of times an initial willing-to-wait request
was unsuccessful.
SLEEPS Number of times a process waited a requested a latch
after an initial wiling-to-wait request.
IMMEDIATE_GETS Number of successful immediate requests for each latch.
IMMEDIATE_MISSES Number of unsuccessful immediate requests for each latch.
Calculating latch hit ratio
To get the Hit ratio for latches apply the following formula:
"willing-to-wait" Hit Ratio=(GETS-MISSES)/GETS
"no wait" Hit Ratio=(IMMEDIATE_GETS-IMMEDIATE_MISSES)/IMMEDIATE_GETS
This number should be close to 1. If not, tune according to the latch name
7. Useful SQL scripts to get latch information
** Display System-wide latch statistics.
column name format A32 truncate heading "LATCH NAME"
column pid heading "HOLDER PID"
select c.name,a.addr,a.gets,a.misses,a.sleeps,
a.immediate_gets,a.immediate_misses,b.pid
from v$latch a, v$latchholder b, v$latchname c
where a.addr = b.laddr(+)
and a.latch# = c.latch#
order by a.latch#;
** Given a latch address, find out the latch name.
column name format a64 heading 'Name'
select a.name from v$latchname a, v$latch b
where b.addr = '&addr'
and b.latch#=a.latch#;
** Display latch statistics by latch name.
column name format a32 heading 'LATCH NAME'
column pid heading 'HOLDER PID'
select c.name,a.addr,a.gets,a.misses,a.sleeps,
a.immediate_gets,a.immediate_misses,b.pid
from v$latch a, v$latchholder b, v$latchname c
where a.addr = b.laddr(+) and a.latch# = c.latch#
and c.name like '&latch_name%' order by a.latch#;
8. List of all the latches
Oracle versions might differ in the latch# assigned to the existing latches.
The following query will help you to identify all latches and the number assigned.
column name format a40 heading 'LATCH NAME'
select latch#, name from v$latchname;

How to find when and what date my iphone was first switched on from a retailer

how to find when and what date my iphone was first switched on from a retailer

Depending on the Code version you are running you can look for this output . It will show when a SFP was removed and inserted.
module-2# show port-config internal all (This command wil differ of earlier versions of SAN OS )
Mar 20 08:53:45 2011 00449361 fc2/20         ---   DOWN   Xcvr inserted
Mar 20 08:53:32 2011 00829429 fc2/20         ---   DOWN   Disable
Mar 20 08:53:32 2011 00826403 fc2/20         ---   DOWN   Disable
Mar 20 08:53:32 2011 00818936 fc2/20         ---   DOWN   Xcvr removed

How to rollback RBS and what happens to existing data

Similar Messages

Maybe you are looking for