HOw to rollback the delta updation

HI,
By mistake one my teamate had update the delta to ful updation. HOw to roll back the delta updation ?
thanks
sangram

Sangam
if u have deleted the init request from the cube, u won't have data for the same in the cube!!
First check if the init flag still exist. For this go in the infopckge-> scheduler-> init flags.If not set this flag on.
So you didn't delete the initialize request from Data mart and at Source system.
Then go to T.code RSA7 and check the data source was exit or not. If the data source exit then you can fetch the data by delta update method other wise again you need to initialize it..
Hope this helps
Thnaks
Sat

Similar Messages

  • Get back the Data mart status in ODS and activate the delta update.

    I got a problem when deleting the requests in ODS.
    actually there is Cube(1st level. it gets loaded from an ODS(2nd level). this gets loaded from 3 ODS'S( 3rd level). we were willing to delete recents requests from all the data tardets and reload from PSA. but while delting in the request in ODS(2nd level), it has displayed a window, showing as follows.
    - the request 132185 already retrived by the data target BP4CLT612.
    -Delta update in BP4CLT612 must be deactivated before deleting the request.
    - Do you want to deactivate the delta update in data target BP4CLT612.
       I have clicked on execute changes in the window. it has removed the data mart status for all the request which i have not deleted.
    in the same it happened inthe 3 ODS's(3rd level).
    I got clear that if we load further data from source system. it will load all the records from starting.
    so to avoid this can any body help me how to reset the Data mart status and activate the delta update.

    Hi Satish,
    U have to make the requests RED in cube and back them out from cube,before u can go for request deletions from the base targets(from which cube gets data).
    Then u have to reset data mart status for the requests in your 'L2 ODS' before u can delete requests from ODS.
    Here I think u tried to delete without resetting data mart status which has upset the delta sequence.
    To correct this..
    To L2 ODS,do an init without data transfer from below 3 ODS's after removing init request from scheduler menu in init infopackage.
    Do similar from L2 ODS to Cube.
    then reconstruct the deleted request in ODS.It will not show the tick mark in ODS.Do delta load from ODS to Cube.
    see below thread..
    Urgentt !!! Help on reloading the data from the ODS to the Cube.
    cheers,
    Vishvesh

  • The delta update for the InfoCube ZCUBE is invalidated

    Hi BI Experts,
    I am working on BW 3.5.
    For the datasource 2LIS_13_VDITM there were some requests(deltas) missing for 3 days.  So I got all the documents there were missing or not updated in BW. I deleted the setup tables and filled them with the new document numbers.
    I did a full repair request from the Infopackage level and the data got updated in ODS.
    But the DM Status is missing for all the requests in the ODS.
    And the data for the full repair request didnt get updated in the Cube and I got the following error:-
    The delta update for the InfoCube ZCUBE is invalidated. The can be due to one of the following:
    1. A request, which was already retrieved from the target system, was deleted from the InfoCube.
    2. A request, which was not yet retrieved from the target system, was compressed in the InfoCube.
    And the following delta was also not successfull.. How can I clear up this mess and ensure smooth flow of deltas. How can I set the DM status.
    Thanks
    Kumar

    Thanks for your reply.
    When I did a Full Repair Request on the ODS the data is in the New table and the DM status got reset(vanished). And the following day delta got failed( data for that request did not get updated in ODS and Cube)
    How can we bring back the DM Status and make the deltas successfull.
    Thanks
    Kumar

  • How to rollback the Airport Extreme to previous release?

    Hello,
    I need to know how to rollback the Airport Extreme to previous release.
    I just updated my last generation Airport Extreme to the latest release because it was blinking orange the status light and it requested to be updated.  Howver, doing so, it no longer recognize my AirPort Express nor my second Airport Extreme (2nd generation) that is bridged.
    If anyone knows how to rollback the update I will appreciate it.
    Thanks,
    genbaez.

    I just updated my last generation Airport Extreme to the latest release
    We might be confused by last generation. does that mean Gen5??
    If it is Gen5 you roll back by holding down the options key while selecting version.
    All the previous versions applicable to your model should pop up.
    Just select the one you want.. and it will proceed. You get no warning or other chance to stop it.. so choose well. 7.6.1 is IMHO the best when you are going to mix with older products.
    I got about 10x link speed improvement doing extend wireless when I rolled back to 7.6.1 yesterday.
    Also you should stop the airport utility annoying you.. turn off the firmware update reminders so they only happen once a week. Uncheck all of these. Ignore the update warning when it will inevitably happen.

  • How to pull the delta

    kindly tell me the procedure how to pull the delta
    regards
    gurkiran

    Hi,
    You need to do initialization with data transfer first. Once that load is complete, change the update mode to delta in infopackage and now it will pull delta records,
    Shashank

  • How to delete the delta queue in the ECC

    Hi everyone!
    After I tryed to save a new Infopackage and I have the error :
    (Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init
    Message no. RSM1071
    Diagnosis
    Deltas have already been loaded for the init. selection of request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG. A second initialization is therefore not possible with these selection conditions.
    Procedure
    If you want to carry out a new initialization, you have to choose selections that do not overlap.
    If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
    As the error says - Deltas have already been loaded for the init. selection.
    Can you please give me some links/guids which describes how to  delete the delta queue in the source system, and restart the delta process.
    thank you, Ron

    Hi,
    Assuming as you need to the reinit for same selections.
    in such case you need to delete old init.
    how to delete init:
    Go to your info pack screen, menu Scheduler--> initialization options for source system--> here you can see the existing init, select init(green) and delete it.
    Later you can trigger your init info pack with selections.
    Thanks

  • How to stop the auto updater in N900 application m...

    Hey guys,
    Anyone know how to stop the auto updater in N900 application manager ?
    Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
    Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
    So got any ideas for this prob...?
    (I usually use faster app manager to install apps.)
    Click the star if this helps you (",)
    If this is your answer, please do not forget to click "Accept as solution" (",)

    virajx3006 wrote:
    Hey guys,
    Anyone know how to stop the auto updater in N900 application manager ?
    Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
    Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
    So got any ideas for this prob...?
    (I usually use faster app manager to install apps.)
    dude check your inbox
    Reality is wrong....dreams are for real... 2pac .
    don't forget to hit that green kudos

  • How to capture the table update

    How to capture the table update.Suppose I delete a enrtry from the table or mofying any entry in a table is there way to capture that update in SAP?

    hi ,
    follow these steps:
    1. After you selecte the search help for New Responislbe person, domodify gets triggered.
    2. In the wddomodify, get the value of New Responsible person by reading the attribute binded to it.
    3. Now if Value entered is not initial, write a selecte query to fetch the name based on pernr no.
    4. Finally bind the name fetched with the attribute binded to New Responsible person name.
    Wdomodify :
    ************* *Read the New REsponsible person Pernr* ***********
      DATA lo_nd_cn_sflight TYPE REF TO if_wd_context_node.
      DATA lo_el_cn_sflight TYPE REF TO if_wd_context_element.
      DATA ls_cn_sflight TYPE wd_this->element_cn_sflight.
      DATA lv_carrid LIKE ls_cn_sflight-carrid.
    * navigate from <CONTEXT> to <CN_SFLIGHT> via lead selection
      lo_nd_cn_sflight = wd_context->get_child_node( name = wd_this->wdctx_cn_sflight ).
    * get element via lead selection
      lo_el_cn_sflight = lo_nd_cn_sflight->get_element(  ).
    * get single attribute
      lo_el_cn_sflight->get_attribute(
        EXPORTING
          name =  `PERNR`
        IMPORTING
          value = lv_carrid ).
    ****** *Check whethre a value has been entered in PERNR* *************
    if lv_carrid is not initial.
    *************Select Name based on pernr entered* ***********
    select ename from pa001 into lv_ename where pernr = lv_carrid.
    *******Set the Name atttribute with the ename value fetched* *****
      lo_el_cn_sflight->set_attribute(
          name =  `NAME`
          value = lv_cename ).
    endif.

  • How to install the maintance update to JDeveloper 9.0.3

    Does any one know how to apply the maintenance update to JDeveloper 9.0.3 running on Linux

    Check out the JDeveloper online help at
    http://otn.oracle.com/jdeveloper903/help/
    go to:
    Getting Started with JDeveloper
    Ways to Migrate to Oracle9i JDeveloper 9.0.3There is a section titled "Migrating Between Different Installations of JDeveloper"

  • The DataSource ZGLOBAL_SPND still has no target system for the delta update

    Dear Experts,
    I have created a Generic Datasource, while checking records in rsa3 iam getting below error.
    Error: The DataSource ZGLOBAL_SPND still has no target system for the delta update.
    Source system is already created.
    For some of the datasources iam getting this msg.
    regards
    KV

    Hi,
    Fisrst did u enabled the Delta for Generic.If yes, the in RSA3 select Update Mode as "D" then provide the BI Trget system and execute.
    If you correct Target system and update mode D then it should fetch Delta records only...If not please write to SAP about this issue.
    Regards
    Ram.

  • How to find the last update date time and user of record field peoplecode

    how to find the last update date time record field peoplecode?
    Thank you.

    One can check the last update date time using the following query
    SELECT LASTUPDDTTM FROM PSPCMPROG WHERE OBJECTVALUE1 LIKE 'RECNAME' AND OBJECTVALUE2 LIKE 'FIELDNAME'

  • Error in RSA3 - no target system for the delta update

    Hi friends,
    I have created one datasource but in RSA3 when i press F4 at target system it gives me msg like "The DataSource V_BW_DPP still has no target system for the delta update" what could be the reason? kindly help me.
    Regards
    Suyash

    Hi Suyash,
    First check whether the BW system is connected to R/3 or not by Right click on Source system in RSA1 and selecting the option Check.
    Also What is the update mode you have chosen in RSA3?. Is it full ( F ) or Delta (D) . If you have chosen delta then you  check in RSA7 whether the data source V_BW_DPP is appearing or not . If it is not appearing in RSA7 do init upload in BW system for the data source and then check in RSA3.
    Regards,
    Prakash

  • How to realize the init-update command in APDU?

    I want to communicate with the card without JCOP IDE but my own program. So I face a problem, there is no APDU for set-key, So I don't know how to change the init-update and ext-auth command to APDU. Does anyone have some experience on that. Please give me some suggestion. Thank you in advance!

    set-key is not a apdu command. In JCOP tools it is just a script command to realize the IDE what keys are going to use in GP authentication. Use the keys to generate cryptograms which is needed in Init-Update and Ex-Auth.
    Go to the following thread:
    http://forum.java.sun.com/thread.jsp?forum=23&thread=395983

  • I am trying to update my iphone 3GS software but itunes just says that this is the current version of itunes, it does not see the phone update - anyone know how to get the phone updated?

    I am trying to update my iphone 3GS software but itunes just says that this is the current version of itunes, it does not see the phone update - anyone know how to get the phone updated?

    Mike
    I have done that and it is through pressing that update, which tells me that there is anew version of iphone software, that the prompt comes telling me that this is the current itunes?

  • Viewing the delta updates from a months of data

    Hi experts,
                i am loading the data as delta update  everyday and once i fail to run the delta update.at the end of month client asks me to show the history of deltas for a month?where i can show the delta updates of a month?is there any tables for showing the delta updates ?

    Hi,
    I think it willbe in table ROOSPRMSC, here u can find out the time stamp of delta uplaods.
    Regards-
    Siddhu

Maybe you are looking for

  • TextEdit on a Small Screen?

    Hi, I have been trying to use dictation. I can't use it in LibreOffice, due to old bugs and a new regression, but I can use it in TextEdit, and copy and paste. Unfortunately, TextEdit shows the text at about half size. If I try to zoom in, then TextE

  • How to save photos in a zip file in ios7

    My wife's ipad2 is running ios 7. She has zip files in her email containing photos.  Clicking on the zip file in Mail opens the photos.  Is this being done outside the Mail app? Anyway, we want to save the photos to a photo roll in the Photo app.  Ho

  • Extractor for managers

    Dear SDN-fellows, I was looking for an hierarchy exctractor for employee numbers which would retrieve their manager based on the organizational chart in Human Resources. I scanned the business content, but did not manage to find anything. Does anybod

  • So should I avoid 1.1.3

    I just found out about this upgrade and new apps, but in some quick reading it doesn't seem like ANYBODY has had it work correctly. I'm afraid to even plug mine into my computer. Has anybody had this work smoothly?

  • Volume changer on ipod touch music app disappeared

    the volume changer on my music app just disappeared, and now I don't know where the heck it went