How to "Rollback" to a previous OS

My core audio does not support OS 10.3.9, it will only support up to 10.3.5 . I need to know how to rollback to this previous version of OSX. Also, if I do roll it back, will this cause any problems for me?
PowerMac G5 Mac OS X (10.3.9)

Hello Again! No, it's not fun. I keep 2 bootable clone backups at all times so if I do any software upgrade or install anything new I can go back to what I know was a good system. One thing I NEVER do is let software update run automatically. I've read too many horror stories from problems associated with updates. I'm also not a fan of going from 10.3.6 to 10.3.9 for instance if 10.3.6 is working fine. If I'm not having a problem that the update is supposed to address I stay put. I've got 10.3.9 as a fresh install on one drive with nothing else but I use 10.3.6 as it's been operating flawlessly for about 2 years. I've added to many hacks and add on programs to risk an update. My system is tweaked just the way I like it. I use CarbonCopyCloner (CCC) to clone with and always boot from the clone to make sure it's ok.I back up any important documents daily to cd/dvd or another HD and I clone about once a month alternating between drives.I also repair permissions at least every week or so and run DiskWarrior about once a month. I also run 24/7/365.Tom
CarbonCopyCloner
G-4/Sawtooth/1.2ghz Sonnet/10.3.6/2gig ram Mac OS X (10.3.6)

Similar Messages

How to rollback the Airport Extreme to previous release?

Hello,
I need to know how to rollback the Airport Extreme to previous release.
I just updated my last generation Airport Extreme to the latest release because it was blinking orange the status light and it requested to be updated. Howver, doing so, it no longer recognize my AirPort Express nor my second Airport Extreme (2nd generation) that is bridged.
If anyone knows how to rollback the update I will appreciate it.
Thanks,
genbaez.

I just updated my last generation Airport Extreme to the latest release
We might be confused by last generation. does that mean Gen5??
If it is Gen5 you roll back by holding down the options key while selecting version.
All the previous versions applicable to your model should pop up.
Just select the one you want.. and it will proceed. You get no warning or other chance to stop it.. so choose well. 7.6.1 is IMHO the best when you are going to mix with older products.
I got about 10x link speed improvement doing extend wireless when I rolled back to 7.6.1 yesterday.
Also you should stop the airport utility annoying you.. turn off the firmware update reminders so they only happen once a week. Uncheck all of these. Ignore the update warning when it will inevitably happen.

How to rollback previous transaction in a series of Adapters in BPEL

in Bpel process we integrate 3 db adapters,
2 adapters are successfully complted,3rd adpter failed.
inthis situation how we rollback the 3 adapter transaction with out using of compensate handling

hey,i have made the code plz chk it and do rep soon as ma project sbmission date is very near =((
i am snaping an image from the web cam then comparing it with the red colored jpg image made in paint.
the jpg image is converted to give input image to imaq match vi.but after the comparison it gives the same output.
on the front pannel the snapped image is displayed,the red colored image that is converted in to its respective pixels is displayed and the image that is obtained after cheking the image in the draw fails vi...the pic converted to pixels is all the time displayed.and the pass/fail icon always denotes one pass led on..plz chk the code =((.
also can u provide me some guide line for using thr hough transform for the red color detection in lab view..i dont have to import the matlab code..i have to purely make it using the lb view libraries.
also one more request pl rep me regularly as i really need your golden piece of advice for ma success.
thnx
Attachments:
picture to image(BY ME).vi ‏102 KB
untitled.JPG ‏3 KB

Cannot rollback to my previous bios. Please Help

I have an MSI 845PE MAX2 mainboard with 6704 chip and bios version 1.2
I have recently made an attempt to upgrade to 3.06 GHz hyperthreading cpu.
Unfortunatelly the board did not recognize the cpu so I tried to upgrade my bios
to 1.3b version which I found somewhere in the Internet. The problem still remains
and I also get a cmos error every time I boot. I tried to rollback to my
previous recovery bios version 1.2 , but it cannot be done because I cannot disable the Bios flash protection feature of the board. I do choose disable, then I choose save and exit and the computer freezes. When I try to cold reboot the system and enter the bios again the Bios flash protection feature is enable again. It seems like I cannot save into the flash rom. I have also used the jumper on the board to erase cmos but nothing. Do you have any ideas what to do? Do you thing I destroyed the board?
thanks

Hi
May I know if you can go pass the POST screen where your computer searches for Bootable Dvices? If so, I will recommand you to get the BIOS for your board from MSI's website and flash it back to BIOS Version 1.2- PCB without 2.0: http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=366&kind=1
I also saw that the current version of BIOS that you are using is denoted by a letter "b" at the end, which in most cases, are beta BIOS which is for engineering use and I personally DO NOT recommand them unless you have problems that are unsolved by the current revision of the BIOS. (This applies especially for BIOS files which are not obtained originally from MSI's website.)
If you do not know how to do a proper flashing of the BIOS, please read the "How to flash BIOS" in the BIOS file. If you want the board to recognise HT, you got to go to the BIOS menu and then advanced chipset setting. Then make sure that MPS Version is at 1.4 and the option Hyper-Threading is enabled. This setting is available on MSI 865PE Neo 2 board and I think it applies to 845PE too.
Cheers
Adrian, MSI Board User

How to Rollback the number autogenerated of a material

Hello,
Please someone can help me, I need to Know how to rollback the autogenerated number of a material.
I am using CALL FUNCTION 'BAPI_MATERIAL_GETINTNUMBER', but when I create a material perhaps a validation error appears when creating the material using CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'.
So, if an error appears how can I go back to the previous number of the material. The counter shouldn' be incremented.
Thank so much from Peru.

Hello,
Question from my side, Why do you want to use 'BAPI_MATERIAL_GETINTNUMBER' for creating a new number?
The FMBAPI_MATERIAL_SAVEDATA, has a call to 'MATNR_NUMBER_CREATE' to create a new number.
Regards,
Sameer

How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode.

How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode. Where can I find this, or is there a general number I can use?

Hello, and welcome to Apple Support Communities!
Try entering four zeroes.

I recently sync one song to my friends iphone 4 and it erased all the music and only put that one song. I tried backing it up but it didnt help. How do I put all previous music back on the iphone?

I recently sync one song to my friends iphone 4 and it erased all the music and only put that one song. I tried backing it up but it didnt help. How do I put all previous music back on the iphone?

Re- sync the phone with the computer it was originally synced with.

HT203167 I had to replace my harddrive on my IMAC and downloads from ITUNES do not show up. How do I restore my previous library?

I had to replace my harddrive on my IMAC and downloads from ITUNES do not show up. How do I restore my previous library?

It has always been very basic to always maintain a backup copy of your computer for this very occasion. Use your backup copy to put everything back.
If for some reason you have failed to maintain a backup copy, not good, then you can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Before the recent updates to Firefox, clicking on the back button always brought me back to the same place on the page where I had been, but now it brings me to the top of the page. How do I restore the previous feature?

Before the recent updates to Firefox, when I would go to another page in the same window and then clickon the back button, Firefox used to bring me back to the same place on the page where I had been, but now it brings me to the top of the page, meaning that I have to laboriously scroll down to the old place. How do I restore the previous feature?

That change was made in Firefox 4, 6 months ago.
Click-hold the unified Back / Forward button <br />
or <br />
right-click it to get the Back / Forward history for that tab.
Or install this extension to get the old "drop-marker" button restored. <br />
https://addons.mozilla.org/en-US/firefox/addon/backforedrop/

HOW TO ROLLBACK ENCUMBRANCE BALANCE

제품 : FIN_GL
작성날짜 : 2003-11-24
HOW TO ROLLBACK ENCUMBRANCE BALANCE
===================================
PURPOSE
balance table의 data 에 corrput 가 발생했을 경우 예산 가집행에 대한 rollback script를 제공한다.
Explanation
1. 관련 data를 모두 backup 받아 놓는다.
2. data가 corrupt 된 기간을 확인한다.
3. gl_balance table에서 corrupt 된 data를 delete한다.
delete from GL_BALANCES
where set_of_books_id = <set of books id which has the corruption >
and actual_flag = 'E'
and encumbrance_type_id = <Encumbrance type id of the corrupt balances>
and period_year >= <Fiscal year which has the corruption >
4. GL_SETS_OF_BOOKS table 을 update 한다.
Update gl_sets_of_books
set latest_encumbrance_year = <last correct encumbrance year>
where set_of_books_id = <set of books id>
5. Encumbrance Year 를 재오픈한다.
Period 화면에서 해당 encumbrance year를 재오픈한다.
6. Journal Status를 update 한다.
update GL_JE_BATCHES set status = 'U', status_verified = 'N'
where default_period_name in <List of periods in the
corrupt fiscal year starting with the first period in that year
up to the latest open for that encumberance type>
and actual_flag = 'E'
and set_of_books_id = <set of books id which has the corruption>
and je_batch_id in
(SELECT je_batch_id
from GL_JE_HEADERS
where encumbrance_type_id = <Corrupt encumbrance type id>
and actual_flag = 'E'
and set_of_books_id = <Corrupt Set of books Id>
and period_name in <List of corrupt periods starting
with the first period in the corrupt fiscal year
up to the latest open for that encumbrance type>
update GL_JE_HEADERS set status = 'U'
where period_name IN <List of periods in the corrupt fiscal year
starting with the first period in that year up to the latest
open for that encumbrance>
and actual_flag = 'E'
and encumberance_type_id = <Corrupt encumbrance type id>
and set_of_books_id = <Corrupt set of books id>
update GL_JE_LINES
set status = 'U'
where period_name IN <<List of periods in the corrupt fiscal year
starting with the first period in that year up to the latest
open for that encumbrance>
and set_of_books_id = <Corrupt set of books id>
and je_header_id IN
(select je_header_id
from GL_JE_HEADERS
where period_name in <List of periods in the corrupt fiscal
starting with the first period in that year up to the latest
open for that encumbrance>
and actual_flag = 'E'
and encumberance_type_id = <Corrupt Encumbrance Type Id>
and set_of_books_id = <Corrupt Set of Books Id>
7. encumbrance journal 들을 repost 한다.
Example
Reference Documents
Note 99415.1

If you want to load balances at the time of go live.
Create a clearing account like data take over A/c
MM will upload material balances using tcode MB1C and movement type 561
it will generate the following accounting entry
Finished goods stock a/c          Debit
Semi-Finished goods stock a/c Debit
Raw Material stock a/c             Debit
Packing Material stock a/c        Debit
Stores and spares a/c              Debit
Data take over                          Credit
Customer a/c (not recon G/l) Debit
Data takeover a/c                  Credit
Data takeover a/c                Debit
Vendor a/c (not recon GL) Credit
For Asset - tcode OASV
Plant and Machinery a/c          Dr
Accumulated depreciation a/c Credit
Data takeover a/c                    Credit
Cash balance through FBCJ
G/L Tcode F-02,
Data takeover a/c     Debit (Balancing figure)
Bank a/c                    Debit
Advances                 Debit
Share capital a/c       Credit
Short term Loan a/c   Credit
Long term loan a/c     Credit

HOW TO ROLLBACK BUDGET BALANCE

제품 : FIN_GL
작성날짜 : 2005-05-10
HOW TO ROLLBACK BUDGET BALANCE
==============================
PURPOSE
GL Budget Balance 의 Period 설정이 잘 못 되었거나 Budget Balance 가 잘 못 지정되었을 경우에 아래와 같은 step으로 Budget Balance 를 Roll back 한다.
Problem Description
고객이 Budget 화면에서 End Date 설정을 잘 못 하여 Period 가 잘못 지정되었는데 Budget Journal이 생성된 후에 End Date 설정을 강제로 변경 하고자 할 경우나 Budget Balance 자체에 문제가 있을 때 아래와 같은 Step 으로 Rollback 한다.
Solution Description
Step 1. 관련 데이타는 미리 Back up 받아 놓는다.
Step 2. Delete 할 Period를 결정한다.
Step 3. GL_BALANCES table에서 해당 period 의 budget balance 를 Delete 한다.
DELETE from GL_BALANCES
where set_of_books_id = <set of books id which has the corruption >
and actual_flag = 'B'
and budget_version_id = <Budget version id of the corrupt budget >
and period_year >= <Fiscal year which has the corruption >
Step 4. Journal Statuses 를 Update 한다.
UPDATE GL_JE_BATCHES set status = 'U', status_verified = 'N'
where default_period_name in <List of periods in the
corrupt fiscal year starting with the first period in that year
up to the latest open for that budget>
and actual_flag = 'B'
and set_of_books_id = <set of books id which has the corruption>
and je_batch_id in
(SELECT je_batch_id
from GL_JE_HEADERS
where budget_version_id = <Corrupt budget version id>
and actual_flag = 'B'
and set_of_books_id = <Corrupt Set of books Id>
and period_name in <List of corrupt periods starting
with the first period in the corrupt fiscal year
up to the latest open for that budget>
UPDATE GL_JE_HEADERS set status = 'U'
where period_name IN <List of periods in the corrupt fiscal year
starting with the first period in that year up to the latest
open for that budget>
and actual_flag = 'B'
and budget_version_id = <Corrupt budget version id>
and set_of_books_id = <Corrupt set of books id>;
update GL_JE_LINES set status = 'U'
where period_name IN <<List of periods in the corrupt fiscal year
starting with the first period in that year up to the latest
open for that budget>
and set_of_books_id = <Corrupt set of books id>
and je_header_id IN
(select je_header_id
from GL_JE_HEADERS
where period_name in <List of periods in the corrupt fiscal
starting with the first period in that year up to the latest
open for that budget>
and actual_flag = 'B'
and budget_version_id = <Corrupt budget version Id>
and set_of_books_id = <Corrupt Set of Books Id>
Step 5. Latest Open Budget Period 를 update 한다.
UPDATE GL_BUDGETS
set latest_opened_year = <Year prior to the corrupt fiscal year>,
last_valid_period_name = <last period for the year prior to the
corrupt fiscal year>
where budget_name = <Budget name of the corrupt budget>
and budget_type = 'standard'
and set_of_books_id = <Corrupt set of books id>;
DELETE from GL_BUDGET_PERIOD_RANGES
where budget_version_id = <Corrupt budget version id>
and period_year = <Corrupt budget fiscal year >;
Step 6. Budget Year 를 Reopen한다.
GL Responsibility 로 Applications에 접속하여 Budget Year를 Open
Step 7. Budget Journals 을 Repost 한다.
해당 Budget Journals 를 Repost 처리 한다.

If you want to load balances at the time of go live.
Create a clearing account like data take over A/c
MM will upload material balances using tcode MB1C and movement type 561
it will generate the following accounting entry
Finished goods stock a/c          Debit
Semi-Finished goods stock a/c Debit
Raw Material stock a/c             Debit
Packing Material stock a/c        Debit
Stores and spares a/c              Debit
Data take over                          Credit
Customer a/c (not recon G/l) Debit
Data takeover a/c                  Credit
Data takeover a/c                Debit
Vendor a/c (not recon GL) Credit
For Asset - tcode OASV
Plant and Machinery a/c          Dr
Accumulated depreciation a/c Credit
Data takeover a/c                    Credit
Cash balance through FBCJ
G/L Tcode F-02,
Data takeover a/c     Debit (Balancing figure)
Bank a/c                    Debit
Advances                 Debit
Share capital a/c       Credit
Short term Loan a/c   Credit
Long term loan a/c     Credit

How do I use a previous email address with my printer?

How do I use a previous email address with my printer? I reset my printer and want to use the same email address as before.Thanks

At this time the printer's email address will not be available for for re-use for 6 months. This is a security measure once an email has been disabled. After that time, one can go into their account and then change the customized email address for the printer.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

I HAVE AN IPHONE 5S AND WANT TO USE SOFTWARE 7.0.2 BECAUSE IT IS COMPATIBLE WITH MY VEHICLE FOR UCONNECT. I CURRENTLY HAVE SOFTWARE 7.0.3 ON MY DEVICE. HOW WOULD I GET THE PREVIOUS SOFTWARE BACK ON MY PHONE

I HAVE AN IPHONE 5S AND WANT TO USE SOFTWARE 7.0.2 BECAUSE IT IS COMPATIBLE WITH MY VEHICLE FOR UCONNECT. I CURRENTLY HAVE SOFTWARE 7.0.3 ON MY DEVICE. HOW WOULD I GET THE PREVIOUS SOFTWARE BACK ON MY PHONE

Forum Tip: It is generally considered inappropriate to type all in uppercase letters in Internet discussions, as text that is typed all in uppercase is by convention considered to be shouting. Uppercase is also more difficult to read, so please use all uppercase sparingly and only when you really mean to shout, which we hope you won’t need to do here .
Regards.

How do I remove the previous owner's Apple ID from my 2nd hand iPhone, and replace it with my Apple ID?

How do I remove the previous owner's Apple ID from my 2nd hand iPhone, and replace it with my Apple ID?

settings - appstore - view id - log out and log in with your id.

How can i remove the previous icloud acount from my iphone4?

I recently purchased a second hand iphone4 not jailbroken and i already restored it to factory settings but i can't log in to icloud using my account because it states that "The maximum number of free accounts have been activated on this iPhone". How can i remove the previous icloud acount from my iphone4? Hope someone could help me on this. Cheers! :)

Hi,
My dad gave me his old iphone as he got an upgrade. I can't seem to change his icloud account to mine. I'm getting his updated calender and his mail - and there seems to be some confusion between both our accounts. He seems to be acquiring some of my contacts - some of which have names which have led to some probing questions... So basically this needs to be sorted out! How can i delete his account from the iphone but not his whole icloud account? he would not be happy if i did this...
Sophie

How to "Rollback" to a previous OS

Similar Messages

Maybe you are looking for