How to Root a Lenovo Tab 2 A10-70 2015 version

I am not responsible for any damage that may affect your Device! Rooting is the first step to customise your device. Without rooting absolutely 'extraordinary' nothing is possible. Yes your warranty becomes void after that. So chill. No matter where you read that its very risky or something like that, I'll say refrain from going to those sites. They are just putting unnecessary fear into your mind. Most probably they fear You could make your device function better than them.So lets go on with it. I've made it simple for you. Just follow the steps. Step 1: Download and install Kingo Android Root. (THE LAST VERSION)Step 2: Double click the desktop icon of Kingo Android Root and launch it.Step 3: Plug your Android device into your computer via USB cable.Step 4: Enable USB Debugging mode on your Android device.USB Debugging mode enabled is a necessary step of Android rooting process.*INPORTANT: Pay attention to your device screen for a prompt window. Tick "Always allow from this computer". If you don't, you will probably get yourself an OFFLINE DEVICE.5. Read notifications carefully before rooting your device.6. Click "ROOT" to root your device.Kingo Android Root will employ multiple exploits on your device, which will probably take a couple of minutes. In the rooting process, your device may be rebooted several times. Do not be panic, it is perfectly normal. And once it begins, please DO NOT touch, move, unplug or perform any operation on your device.7. Root succeeded, click "Finish" to reboot your device.8. Check the root status of your device.9-Enjoy your Root in your new Lenovo Tab 2 A10 *Android rooting is a modification process to the original system, in which the limitations are removed and full-access is allowed and thus resulting in the ability to alter or replace system applications and settings, run specialized apps and even facilitate the removal and replacement of the device's operating system with a custom one. Rooting your device will immediately void your warranty...

I was able to root it using Kingoroot, but it needed some help! Kingo said the root was successful, but the tablet was not really rooted. Some apps, like Greenify, would not work correctly. I unrooted, then rerooted with the same result. The last time I did this, the Kingo Superuser app said it needed an update to its binary. Instead of updating it, I installed Super SU 2.46 and then had it update its binary. After a restart, I was fully rooted. I have not removed the Kingo Superuser app or updated Super SU. If it is not broken, do not fix it! ;p). I also was interested in installing Xposed, but at the start of the installation, it warned me that the app was not compatible with some of the tablets hardware (processor or chipset?), so I removed the installer. I would not install it until Xposed is updated. The only other thing I would like to do is install Clockwork Mod recovery, but I am not sure if it is compatible with the Tab 2.

Similar Messages

LENOVO TAB 2 A10-70 lollipop issues report everybody.

Recently lenovo give the lollipop update to the LENOVO TAB 2 A10-70,but everybody has reporting serious bug's in this tablet after made the update,please can you put all your issues related with lollipop?Lenovo is not interested in bring a bug's fix for this tablet?

Omg, where do I begin? First of all I can't even bring up the **bleep** keyboard to type this response. I'm using the tablet right now to type this message in another application so I can cut and paste. Lenovo Tab 2 A7-10F Android 5.01 Lollipop ROM bugs: 1. Update initially soft bricked the tablet at boot. (Hard Reset required (Power button + Volume Down boots into recovery mode) [Fixed issue] 2. Dolby sound was VERY low. (Wiped all Dolby app data) [Fixed issue] 3. Poor Wi-Fi reception & range. (Seriously you have to be right next to the **bleep** source of the Wi-Fi signal or else it's slow as F****. [Unresolved issue] 4. Bluetooth connection issues. Paired devices take forever to sync, I have to reboot the tablet and reboot the Bluetooth device or Remove the device and Pair it again from scratch. [Unresolved Issue] 5. In portrait mode regardless of the application in use the front facing camera, if oriented on the right hand, side turns the screen off briefly several times until you rotate the screen into landscape then it stops. I can't begin to tell you how F**** annoying this is and it happens often. This tablet does not have a proximity sensor and I theorize is using the crappy camera adhoc to shut the screen off. [Unresolved issue] Looking back I should have purchased a Nexus 9. I wasted more time and gray hair than I expected and still have issues unresolved. I will never purchase another Lenovo Tablet.

Suggestions for sturdiest cases for Lenovo Tab 2 A10 tablet?

Hi, I'm thinking of buying a Lenovo Tab 2 A10 tablet and I'm also looking to get a sturdy case to put it in. The sturdier case (like military grade even) the better. I looked up many sites that all show cases for the Galaxy Tab 2. It looks pretty much the same in size, but I could make out judging only by the photos if all the port holes were also compatible with the Lenovo tablet. I'll also contact Lenovo customer support to see if the recommend a list of cases, but right now I was wandering if anyone knows/owns of a sturdy case that could do the trick. thanks.

Omg, where do I begin? First of all I can't even bring up the **bleep** keyboard to type this response. I'm using the tablet right now to type this message in another application so I can cut and paste. Lenovo Tab 2 A7-10F Android 5.01 Lollipop ROM bugs: 1. Update initially soft bricked the tablet at boot. (Hard Reset required (Power button + Volume Down boots into recovery mode) [Fixed issue] 2. Dolby sound was VERY low. (Wiped all Dolby app data) [Fixed issue] 3. Poor Wi-Fi reception & range. (Seriously you have to be right next to the **bleep** source of the Wi-Fi signal or else it's slow as F****. [Unresolved issue] 4. Bluetooth connection issues. Paired devices take forever to sync, I have to reboot the tablet and reboot the Bluetooth device or Remove the device and Pair it again from scratch. [Unresolved Issue] 5. In portrait mode regardless of the application in use the front facing camera, if oriented on the right hand, side turns the screen off briefly several times until you rotate the screen into landscape then it stops. I can't begin to tell you how F**** annoying this is and it happens often. This tablet does not have a proximity sensor and I theorize is using the crappy camera adhoc to shut the screen off. [Unresolved issue] Looking back I should have purchased a Nexus 9. I wasted more time and gray hair than I expected and still have issues unresolved. I will never purchase another Lenovo Tablet.

Do you recomended a lollipop update to LENOVO TAB 2 A10-70?

I found some many complaints about that updated, please lenovo what happened ???I just buy a LENOVO TAB 2 A10-70 today and have some many bugs with the Dolby app,WiFi,......I just wait to see if lenovo is working on any update,I have 15 days to return this tablet....please this tablet is great.... Not leave alone lenovo

I figured that I'd give the update a try and if it didn't work out then I'd return it and buy another to keep KitKat... I'm happy to say that the upgrade to Lollipop went smoothly and everything appears to be working correctly - no issues with WiFi, audio, battery life or anything else that I can observe. I initially thought that web browsing performance was a bit slower, but after some more use I now think it is at least equal if not better than KitKat. I don't bother with benchmarks, for me it either feels good or it doesn't. I upgraded my tablet shortly after receiving it, so I had not installed many apps before upgrading to Lollipop and the tablet was fairly clean. The upgrade went very smoothly, taking about 15 minutes to install. I received the architectural error others have mentioned after the primary upgrade, but ignored it and continued to install the last update that followed. The last update suggested performing a factory reset which I did, and when the tablet rebooted all errors were gone. All in all it was a painless experience and I am satisfied with the result. I think two factors might be causing others some trouble... I personally would start with a clean tablet, so if you have installed many apps I would perform a factory reset both before and after the Lollipop update. My screen never went black for long, but in any event once the update starts you should just leave the tablet alone until it completes. I set the sleep timer to max so it wouldn't power down while the update is in process. Curiously, the major update to 5.01 Lollipop was identified by Lenovo as simply bug and stability fixes (but 1300+ MB), while the last patch with bug fixes had much more verbage and warned of data being deleted, and also mentioned performing the factory reset... Lenovo should improve their changelog notes for these patches because the biggest one doesn't very clearly state it is upgrading to Lollipop. Anyway, its cool that Lenovo keeps updating the tablet, Asus never provided any updates to my old Memo Pad FHD10. The Tab 2 A10 is a great deal and I'm very happy with it.

Massive audio issues Lenovo Tab 2 A10

I bought the Tab 2 A10 2 weeks ago and was very curious about Atmos. Yesterday I had my first chance to check out media with my headphones and I am very disappointed with the sound. It is not all immersive. It does not sound like any sound is coming from the front. Just the sides and it is very hollow. Yesterday the Atmos app did show levels. I did a force stop on Dolby and Atmos to see if that helped the sound. It did not. And, when I went back to the app the levels are all zero now. They have flatlined. I did a forum check and saw that the best thing to do was a hard reset. A factory reset. I did that this morning and it also did the upgrade to Lollipop 5.0. The sound is still messed up and Atmos still is zeroed out. I am seriously annoyed as I watch a lot of stuff with my tablet and headphones. Does anybody have any suggestions?

Hi, I cleared Dolby Cache and forced the programs (Both Dolby Icons) to stop then restarted my Tab 2 A 10. Works great until you use something other than Dolby Atmos for audio. As soon as I play an MP3 with any other player (I tried several) Dolby stops working again. Frustrating!!! When I launch an MP3 or Movie or Live TV (Xfinity App) without using a differend sound resource Dolby Atmos works fine EXCEPT... I can't adjust the Mixer on the fly. I have to minimize whatever I am playing which stops it from playing, make changes to the Mix then Max the MP3, Movie, Etc... and listen to hear if my changes made things sound better or worse which ususlly takes several attempts. Also, when I move the sliders they won't stay where I want. They slide back down almost to where they were. I have never seen a mixer do this before. Anyone know why this is happening?? Thank you, Mike

How to root Lenovo Tab 2 A10-70L?

Hello everyone!
Did someone rooted safely LTE+WIFI version?
Please help me cause I didn't found any solutions...

I was able to root it using Kingoroot, but it needed some help! Kingo said the root was successful, but the tablet was not really rooted. Some apps, like Greenify, would not work correctly. I unrooted, then rerooted with the same result. The last time I did this, the Kingo Superuser app said it needed an update to its binary. Instead of updating it, I installed Super SU 2.46 and then had it update its binary. After a restart, I was fully rooted. I have not removed the Kingo Superuser app or updated Super SU. If it is not broken, do not fix it! ;p). I also was interested in installing Xposed, but at the start of the installation, it warned me that the app was not compatible with some of the tablets hardware (processor or chipset?), so I removed the installer. I would not install it until Xposed is updated. The only other thing I would like to do is install Clockwork Mod recovery, but I am not sure if it is compatible with the Tab 2.

How do I change the tab sizes in the new version of Firefox?

Hi,
Thanks for any help in advance.
Of course the new Firefox is messing with me...But I have one specific question...
Facts...
1) I own a iMac...17 inch...So I can open lots and lots of tabs at once.
2) I just rebooted my computer back to brand new.
3) I'm working on finding all my old stuff, but can't seem to find two specific items...
In the previous version, and before I rebooted, I had about 40 tabs (Including Cluster Tabs) opening-up whenever I started a browse session. But now, I can't seem to control the size of the tabs, so they get less narrow as I had them?
I've already downloaded "Vulcanize Tabs" but that's no help...I think it was a specific theme that allowed me to do this, but many of the themes don't work with this new version of Firefox.
I suspect I'll just have to wait until the themes are updated? Or, do you have a better idea?
Also...
I want to get rid of the "X" on each tab and only have a close tab button on the far right of my tabs navigation bar.
Any help?
If so, thanks again!
Ps...Is there a way to reverse my downloading of this newest Firefox version and go back to the previous one until this new one gets many of the bugs worked-out?

You can also look at Tab Mix Plus.
Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122

How to root Lenovo Yoga Tablet 2 pro

I want to root my Lenovo Yoga Tablet 2 pro (android version 4.4.2), but I dont want a bricked device. So, can someone please help me? Send a tutorial, download link..? I would be so greatful, thanks.

just reflash with intel's phone flash tool, and all is getting back to stock. no need to clean or other stuff... just select the flash.xml (not others xml). if you peek inside the file you will see that he is creating and formatting the partitions again so whatever was on your emmc (tablet's equivalent hd) is gone. as long as you didnt mess around with bios reflashing with that xml will get you back in time to the place you were when you first started your tablet (assuming you are flashing the same rom)Lenovo implemented Secure Boot (or as we know it better as 'locked bootloader') so as long you didn't mess with bios (and i don't think you did) theres no way anyone could tell that the tablet was rooted sometime. the rooting method used now is "online" after the secure boot has done his job of starting the kernel.not my case coz i will sodomize my bios to bypass the secboot (i want to install linux and windows, just for fun, and this tablet would be fun for me running linux and a chroot with android, so that I WILL SECURE BOOT android ) and anyways i can get back anytime (worst case i have a flash burner)

Faulty storage on lenovo tab A10!

OK so I have had the Lenovo tab a10 for about 4 months now, fine but one problem: I am missing over 7 gigabytes of storage. They're just not there. Now it won't let me download anything like apps and movies. Has anyone else had this problem? If it can't be fixed I will never buy from Lenovo ever again. The visual breakdown tells me that I have nearly half of my storage left. This is correct, however it says I only have 384 megabytes available and apps will not download. Something is increasingly taking up storage, because this morning I had over 700 megabytes available (still not alot, but much more than now), I haven't used the device all day and now when I came back to it I only had 384 megabytes available and that amount is decreasing but nothing else is changing. Long story short, what's eating up my storage?!

Try an app like DiskUsage and see if it tells you what's going on? Delete cache? Do you have any apps that might be storing streamed media or something?

How to Root Lenovo S939? And how to install VIBEUI_V1.5_1417_2_DEV_S939_NK_W_B215_MultiLang_GAPPS_

I bought a Lenovo S939 with a multilanguage ROM and GAPPS (aNDROID 4.2.2 - S939_S124_131211). After the system update to the 4.4.2 ( VIBEUI_V2.0_1434_2_ST_S939) all the system (including Apps) have appeared in Chinese (I could choose English as system language): I managed to install Google Play (installing GMSTools), and I could download Almost all Google Apps (some of them are not compatible with this version, for example G+ is not in Google play at all).
In order to have a multilanguage version with all the functions I had in the original 4.2.2 Android version I've downloaded VIBEUI_V1.5_1417_2_DEV_S939_NK_W_B215_MultiLang_GAPPS_(link http://www.needrom.com/download/lenovo-s939-4-4-2-multilang/) and I've followed all the instruction (after installing all the software I needed) illustrated in the linked web page. I don't have any problem along the whole process, but at the end, when i connect my phone the red bar doesn't appear and nothing happens.
What happens? what's the mistake?? My phone is not rooted.
I have tried to root it in different ways. but it seems impossible. Do yo know how to root S939?
Thanks
Dario

Hola, Dario.
¿Pudiste rootearlo?

How to make root for lenovo a3500

Hey Guys
I need to know how to make root for lenovo a3500
I tried Kingo Android Root but it didn't do anything
Need help guys and thanks

I haved to try vroot, but unsucess. I haved upgrate android 4.4.2 and try used kingoroot and vroot unsucess. Who do try sucess? Help me?

Lenovo Tab S8-50F will not update ota

I recieved a new update for my lenovo tab s8-50f, and whenever i try to update, it gives me an error screen
Finding update package.....
Opening update package.....
Verifying update package......
Installing update....
Verifying current system.....
assert failed: apply_patch_check("/system/app/AnyShare_ROW.odex", "55fccc4b5d8f37855f34c55417f47122bd46a27c" , "9780dd9540fe10726655e42bb3b968a65ee48e3b")
E: Error in /data/media/0/lenovoota/S8-50F_S000164_141103_ROW_TO_S8-50F_S000185_141203_ROW.zip
(Satus 7)
E: Install of data/media/0/lenovoota/S8-50F_S000164_141103_ROW_TO_S8-50F_S000185_141203_ROW.zip
failed with status 1
Installation Aborted.
E: Installation failed with status 1
Any idea on a way to fix this. looks like its lenovo fault. The tab s8 is a very buggy tablet. lots of glitches. Werid ticking noises from speakers when tab is locked. Screen wouldnt turn on. doesnt update. overheats.tablet came with a dead or "stuck" pixel.

abubatatachick wrote:
i uninstalled lenovos system apps. share it, sync it, clone it, security hd. and i did root
Well...That's why the update failed to install.If you root the device and uninstall pre-installed system apps(those that you can't normally uninstall) OTA updating stops working.
Try to perform a factory reset (in the hope it will restore those apps...slim chance but worth a try).
If that dosen't work the only way you will be able to OTA update (and,no...manually downloading the update>installing it from recovery also won't work) is to completely reflash the stock firmware(on your own risk).
Unfortunately you'll have to find out how to do that on your own.Sorry
PS:Generally speaking it's better to ''hibernate''(after rooting) not uninstall if you want to OTA update in the future.
*Rooting your device voids your warranty
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

{GUIDE} How to Root Xperia Smartphones [2011 and 2012 Xperias]

This thread is for 2011 and 2012 Xperias, for 2013 and 2014 Xperias, check this thread
New Update: Upon request from users, i've created a facebook page where you can get updates on whatever happens here, new firmwares, android versions, new rooting methods etc. You can also ask questions, post suggestions. Here's the link http://www.facebook.com/GuideToFlashRootXperiaNabeel
Hi all
Previous rooting thread got deleted along with Spam threads by mistake, here's the new one.
Screenshots of Old thread
Rooting your mobile may void the warranty and you're doing it at your own risk. Sony would be in no way responsible for any damage.
For flashing firmwares, see the Guide > {GUIDE} Install ICS ( Ice Cream Sandwich) on Xperia™ Smartphones, Root and Downgrade to Gingerbread
This post is for 2011 Xperias models, for 2012 /2013 Xperia see post below.
2011 Xperia
How to root Ice Cream Sandwich (4.0.3, 4.0.4) (4.1.B.0.587 4.1.B.0.431 4.1.A.0.562)
This is the new method to root, for old method, see 3rd post ( Archived method )
Supported phones = Xperia Arc S , Arc and Ray , Neo V, Neo, Live with walkman, Mini, Mini Pro, Active, Neo L, Xperia Pro
     Go to settings > Security > Mark "Unknown sources"
     Settings > Developer options > Mark USB debugging
     Settings > Xperia > connectivity > USB connection mode > select MSC mode
     PC Companion installed on your PC
After marking the settings above, connect your phone to PC ( Skip PC Companion installation on your phone ) and wait for the adb drivers to be installed.
Download this rooting toolkit. Link > 1 / 2 and run it. If after running toolkit any download begins, cancel it by clicking on the green button. Don't let the eroot download anything. It should now detect your phone and show an option to "root". Just click on it, wait till it finishes.
Rooting done ( For confirmation see if any Super User app has been installed on your phone )
If it somehow fails for the first time, give it another go. Restart everything, your PC, phones etc. If it doesn't work at all, see the other method to root i;e Archived method to root 2011 Xperias below the animated Xperia Picture.
Finally Created threads on XDA > http://forum.xda-developers.com/search.php?do=finduser&u=4575567&starteronly=1
Follow this guide and latest updates on Facebook http://www.facebook.com/GuideToFlashRootXperiaNabeel :smileywink:
How to root 2.3 ( Gingerbread )
     Go to settings > Security > Mark "Unknown sources"
     Settings > Developer options > Mark USB debugging
     Settings > Xperia > connectivity > USB connection mode > select MSC mode
Rooting 4.0.2.A.0.42 and .58
Download this Rooting toolkit Link > 1 / 2 on your PC . Extract it, connect your phone to PC ( It should be on ) and wait for 2 minutes. After that run the rooting toolkit and root your phone.
Rooting 4.0.2.A.0.62
     Go to settings > Security > Mark "Unknown sources"
     Settings > Developer options > Mark USB debugging
     Settings > Xperia > connectivity > USB connection mode > select MSC mode
     PC Companion installed on your PC
After marking the settings above, connect your phone to PC ( Skip PC Companion installation on your phone ) and wait for the adb drivers to be installed.
Download this rooting toolkit. Link >  1 / 2 and run it. If after running toolkit any download begins, cancel it by clicking on the green button. Don't let the eroot download anything. It should now detect your phone and show an option to "root". Just click on it, wait till it finishes.
Rooting done ( For confirmation see if any Super User app has been installed on your phone )
If the method of doesn't work for you, then flash a 0.42 firmware from here >
{GUIDE} How to Install ICS ( Ice Cream Sandwich) on Xperia™ Smartphones, Root and Downgrade to Ginge...
And then use the method to root 4.0.2.A.0.42
After rooting, update your phone to 0.62 via mobile's update center app and not using PC Companion or SUS or flashtool.
Note: Using PC Companion and "Update Service" to update your phone would result in loss of root.
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.
Solved!
Go to Solution.

How to Remove Bloatwares / Junk apps / Waste apps / System apps / Unusefull apps / etc Apps on Xperias
1) Download Root Explorer from google play ( Or any similar app ) .
2) When you'll open this app Superuser would ask for permissions. Allow it
3) Now using that app go to SYSTEM/ APP / Copy all the apps and paste them somewhere on memory card ( incase if you need in future)
4) Now again go to SYSTEM/ APP / . On the top right corner you'll see Mount R/W , tap on it ( Now you should see it as Mount R/O )
4) Now to delete an app tap and hold on the app you want to delete and press delete
After deleting the necessary apps, restart your phone. ( You can also select the mark options and delete all the NECESSARY apps in one go )
Be carefull with the procedure above. If you remove any usefull app, you may run into trouble ( I won't help you )
Here's the list of apps that you could remove safely/ without harming your phone . Remove the ones you don't use at all
List for 2011 Xperias
For Xperia Sola, Xperia U , Xperia P
FAQ's
Q Do i need to unlock the bootloader prior to rooting ?
A No
Q My bootloader is unlocked, can i still root my phone ?
A This method works for both, locked and unlocked bootloader.
Q My bootloader unlocking allowed status is No, can i still root my phone ?
A Yes
Q Will rooting erase all data on phone memory ?
A Nopes. But if anything goes wrong, you may need to repair your phone using PC Companion which would erase all data. So better backup important stuff
I'll keep on adding stuff, please feel free to help me
Archived Method to Root 2011 Xperias
Thread Created on Feb 1, 2013
New Update: Upon request from users, i've created a facebook page where you can get updates on whatever happens here, new firmwares, new android versions, new rooting methods etc. You can also ask questions, post suggestions. Here's the link http://www.facebook.com/GuideToFlashRootXperiaNabeel
This Guide looks big because every detail has been included. It's very easy to root your phone.
Hi all
My previous rooting thread got deleted somehow, here's the new one.
Screenshots of Old thread
Rooting your mobile may void the warranty and you are doing it at your own risk. Sony would be in no way responsible for any damage.
For flashing firmwares, see the Guide Below
{GUIDE} Install ICS ( Ice Cream Sandwich) on Xperia™ Smartphones, Root and Downgrade to Gingerbread
This post is for rooting 2011 Xperias. For 2012 Xperia See reply number 1 below
How to root 4.0.4 (4.1.B.0.587 & 4.1.B.0.431)
We cannot root 4.1.B.0.587 directly, so to root it we first flash 4.1.A.0.562 kernel, run the rooting toolkit and in the end flash 4.1.B.0.587 kernel.
Few devices don't have their own 4.1.A.0.562 kernel, so we need to flash the 4.1.A.0.562 kernel of other devices just to root. However all devices have 4.1.B.0.587 kernel.
Follow all the steps.
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
Download Flashtool
Windows Users > Flashtool
Linux Users > Flashtool ( From previous release tab, download 0.9.0.0 version)
After installing flashtool, reboot your PC.
1 ) Download the respective 4.1.A.0.562 kernel to flash
     Arc and Arc S - Kernel
     Ray                - Kernel
     Neo/Neo V      - Kernel
     LwW, Mini       - Kernel
     Active             - Kernel
     Neo L             - Kernel
     All other users - Kernel or even try the kernels for Arc S and Ray
2) Go to C:/ Drive > flashtool > firmwares > delete everything present and put the downloaded kernel
3) Run Flashtool > click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Flashtool Setup Screenshot
Follow the steps, connect your mobile and flash. Note: on devices with touch navigation keys, hold volume down key instead of back button while connecting your device.
Flashtool may show error after flashing kernel, no worries. Even your build number and android version won't change. Everything would remain same so please don't visit phone's settings to check anything
4) After flashing restart your device, It may not start completely, may remain at Sony logo or with blank/black screen.
Whatever the status is, just restart your device and proceed with the rooting >
Download Rooitng toolkit > 1 / 2 / 3 / 4 and extract it.
( Make sure you close flashtool before running the rooting toolkit )
Now connect your mobile to PC ( Mobile should be ON) and wait for 2 minutes. Then run the rooting toolkit. When it says all done, close it. disconnect your phone and switch it off ( By pressing power button/ or by taking out the battery and reinserting it).
5) Download Kerenls, If you are on 4.1.b.0.431 rom then download the respective kernel, same goes for 4.1.B.0.587
For Neo L > Download the kernel version on which your phone is running 4.1.B.0.626 or 4.1.B.0.631
Xperia
4.1.B.0.431
4.1.B.0.587
Arc S
Kernel
Kernel
Arc
Kernel
Kernel
Ray
Kernel
Kernel
Neo
Kernel
Kernel
Neo V
Kernel
Kernel
Mini
Kernel
Kernel
Pro
Kernel
Kernel
Live with walkman
Kernel
Kernel
Active
Kernel
Kernel
Mini Pro
Kernel
Kernel
Now flash the kernel ( same procedure as step 2 and 3 above )
Your mobile should now b rooted (See if any Superuser app has been installed on your phone ) and working fine again.
Please let me know how did it go for you by posting below, it will be great if you like the guide as well here > http://www.facebook.com/GuideToFlashRootXperiaNabeel
How to root 2.3 ( Gingerbread )
Firmware 4.0.2.A.0.62 and 4.0.2.A.0.69 are difficult to root on a locked boootloader. So to root it, you need to flash 4.0.2.A.0.42
To flash 4.0.2.A.0.42 or any firmware, follow this guide
{GUIDE} How to Install ICS ( Ice Cream Sandwich) on Xperia™ Smartphones, Root and Downgrade to Ginge...
Rooting 4.0.2.A.0.42 and .58
1) Go to settings > Security > Mark "Unknown sources"
     Settings > Developer options > Mark USB debugging
     Settings > Xperia > connectivity > USB connection mode > select MSC mode
2) Download this Rooting Toolkit on your PC . Extract it, connect your phone to PC ( It should be on ) and wait for 2 minutes. After that run the rooting toolkit and root your phone.
3) After rooting upgrade to 4.0.2.A.0.62 using the mobile's "Update Center" app
Note: Using PC Companion and "Update Service" to update your phone would result in loss of root.
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

How to drag and drop tab nodes between tab panes

I'm working on example from this tutorial( Drag-and-Drop Feature in JavaFX Applications | JavaFX 2 Tutorials and Documentation ). Based on the tutorial I want to drag tabs between two tabs. So far I managed to create this code but I need some help in order to finish the code.
Source
tabPane = new TabPane();
Tab tabA = new Tab();
   Label tabALabel = new Label("Main Component");
tabPane.setOnDragDetected(new EventHandler<MouseEvent>()
            @Override
            public void handle(MouseEvent event)
                /* drag was detected, start drag-and-drop gesture*/
                System.out.println("onDragDetected");
                /* allow any transfer mode */
                Dragboard db = tabPane.startDragAndDrop(TransferMode.ANY);
                /* put a string on dragboard */
                ClipboardContent content = new ClipboardContent();
                content.put(DataFormat.PLAIN_TEXT, tabPane);
                db.setContent(content);
                event.consume();
What is the proper way to insert the content of the tab as object? Into the tutorial simple text is transferred. How I must modify this line content.put(DataFormat.PLAIN_TEXT, tabPane);?
And what is the proper way to insert the tab after I drag the tab:
Destination
tabPane.setOnDragDropped(new EventHandler<DragEvent>()
            @Override
            public void handle(DragEvent event)
                /* data dropped */
                /* if there is a string data on dragboard, read it and use it */
                Dragboard db = event.getDragboard();
                boolean success = false;
                if (db.hasString())
                    //tabPane.setText(db.getString());
                    Tab tabC = new Tab();
                    tabPane.getTabs().add(tabC);
                    success = true;
                /* let the source know whether the string was successfully
                 * transferred and used */
                event.setDropCompleted(success);
                event.consume();
I suppose that this transfer can be accomplished?
Ref javafx 2 - How to drag and drop tab nodes between tab panes - Stack Overflow

I would use a graphic (instead of text) for the Tabs and call setOnDragDetected on that graphic. That way you know which tab is being dragged. There's no nice way to put the Tab itself into the dragboard as it's not serializable (see https://javafx-jira.kenai.com/browse/RT-29082), so you probably just want to store the tab currently being dragged in a property.
Here's a quick example; it just adds the tab to the end of the current tabs in the dropped pane. If you wanted to insert it into the nearest location to the actual drop you could probably iterate through the tabs and figure the coordinates of each tab's graphic, or something.
import java.util.Random;
import javafx.application.Application;
import javafx.beans.property.ObjectProperty;
import javafx.beans.property.SimpleObjectProperty;
import javafx.event.EventHandler;
import javafx.scene.Scene;
import javafx.scene.control.Label;
import javafx.scene.control.Tab;
import javafx.scene.control.TabPane;
import javafx.scene.input.ClipboardContent;
import javafx.scene.input.DragEvent;
import javafx.scene.input.Dragboard;
import javafx.scene.input.MouseEvent;
import javafx.scene.input.TransferMode;
import javafx.scene.layout.StackPane;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class DraggingTabPane extends Application {
private static final String TAB_DRAG_KEY = "tab" ;
private ObjectProperty<Tab> draggingTab ;
@Override
public void start(Stage primaryStage) {
draggingTab = new SimpleObjectProperty<>();
TabPane tabPane1 = createTabPane();
TabPane tabPane2 = createTabPane();
VBox root = new VBox(10);
root.getChildren().addAll(tabPane1, tabPane2);
final Random rng = new Random();
for (int i=1; i<=8; i++) {
    final Tab tab = createTab("Tab "+i);
    final StackPane pane = new StackPane();
      int red = rng.nextInt(256);
      int green = rng.nextInt(256);
      int blue = rng.nextInt(256);
    String style = String.format("-fx-background-color: rgb(%d, %d, %d);", red, green, blue);
    pane.setStyle(style);
    final Label label = new Label("This is tab "+i);
    label.setStyle(String.format("-fx-text-fill: rgb(%d, %d, %d);", 256-red, 256-green, 256-blue));
    pane.getChildren().add(label);
    pane.setMinWidth(600);
    pane.setMinHeight(250);
    tab.setContent(pane);
    if (i<=4) {
      tabPane1.getTabs().add(tab);
    } else {
      tabPane2.getTabs().add(tab);
primaryStage.setScene(new Scene(root, 600, 600));
primaryStage.show();
public static void main(String[] args) {
launch(args);
private TabPane createTabPane() {
    final TabPane tabPane = new TabPane();
    tabPane.setOnDragOver(new EventHandler<DragEvent>() {
      @Override
      public void handle(DragEvent event) {
        final Dragboard dragboard = event.getDragboard();
        if (dragboard.hasString()
            && TAB_DRAG_KEY.equals(dragboard.getString())
            && draggingTab.get() != null
            && draggingTab.get().getTabPane() != tabPane) {
          event.acceptTransferModes(TransferMode.MOVE);
          event.consume();
    tabPane.setOnDragDropped(new EventHandler<DragEvent>() {
      @Override
      public void handle(DragEvent event) {
        final Dragboard dragboard = event.getDragboard();
        if (dragboard.hasString()
            && TAB_DRAG_KEY.equals(dragboard.getString())
            && draggingTab.get() != null
            && draggingTab.get().getTabPane() != tabPane) {
          final Tab tab = draggingTab.get();
          tab.getTabPane().getTabs().remove(tab);
          tabPane.getTabs().add(tab);
          event.setDropCompleted(true);
          draggingTab.set(null);
          event.consume();
    return tabPane ;
private Tab createTab(String text) {
    final Tab tab = new Tab();
    final Label label = new Label(text);
    tab.setGraphic(label);
    label.setOnDragDetected(new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        Dragboard dragboard = label.startDragAndDrop(TransferMode.MOVE);
        ClipboardContent clipboardContent = new ClipboardContent();
        clipboardContent.putString(TAB_DRAG_KEY);
        dragboard.setContent(clipboardContent);
        draggingTab.set(tab);
        event.consume();
    return tab ;

Lenovo tab S8-50L - Security HD disappeared after upgrade

Hello, I have bought a Lenovo Tab S8-50L tablet a month ago. In last days tablet informed me about new firmware upgrade.After firmware upgrade application Security HD was removed. How to install and bring it application back? This was helpfull app for me and i would like to use it in future.

Try here...https://www.av-test.org/en/antivirus/mobile-devices/android/ sort by "Protection" by clicking on the title at the top of the column. .

How to Root a Lenovo Tab 2 A10-70 2015 version

Similar Messages

Maybe you are looking for