How to rotate a video clip 90 degrees?

I have a video clip that was shot with the camera held sideways, and so the clip is on its side and looks really crappy. How do I rotate it so it looks correct?

The cf/x turn clip iMovie plug-in has some limitations: It doesn't properly work with interlaced input because also the interlacing lines are simply rotated and this doesn't look good on a TV! So you should use it only for progressive material or deinterlace the input. It can't rotate the material without cropping and it doesn't preserve the correct aspect ratio when rotating rectangular pixels).
If that disturbs you and you are willing to do it the hard way, see:
How can I convert vertical video to DV or rotate DV (and preserve interlacing):
http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#vert-horizrotate

Similar Messages

  • Does anyone know if/how to rotate a video clip?  I shot it so that it is sideways on my computer screen and I cant figure out how to rotate it.

    Does anyone know if/how to rotate a video clip in iphoto?  I shot it so that it plays sideways on my computer and I cannot figure out how to rotate it.  Thanks.

    You can't do that in iPhoto. You'll need a video editor like iMovie for the job.
    Regards
    TD

  • Rotating a video clip 180 degree's

    Hi there everyone,
    I have some footage shot from a gopro hero silver 4. How can I turn a video clip 180 degree's?
    Thanks in advance
    Rchjr

    Try rotate in Motion.
    Or type in Rotate in the Search:
    Adobe Premiere Pro Help | Adobe Premiere Pro Help

  • How do I rotate an .mts (AVCHD Lite) video clip 90 degrees?

    How do I rotate an .mts (AVCHD Lite) video clip 90 degrees? It's a video taken in the portrait orientation with a digital camera. I can open the .mts video clip in VLC player for Mac, but I don't see any editing options relevant to this.

    If it will play with QuickTime Player, then you can rotate it with QuickTime Pro.
    <http://www.apple.com/quicktime/pro/>
    It provides a key to enable extra functions in QuickTime Player 7 (Utilities folder).
    Click "Show Movie Properties" in the "Window" menu, select the video track, then the "Visual Settings" tab. Select the desired rotation, then "Save As" from the "File" menu.

  • Rotate a video clip and arbitrary amount (not as much as 90 degrees)

    I would like to rotate a video clip by a small amount (3-5 degrees) because I didn't have my tripod level when I shot it. This is something I can do in Photoshop with stills. I think it may be possible in FCE if I enlarge the image first. Can anyone talk me through it. I've checked the previous discussions and can't find the full answer to this.
    Thanks
    John

    1. Make sure the footage is not interlaced.
    That means it should be progressive, which is the same as Field Dominance: None.
    2. Open the clip in the Viewer.
    3. Click on the Motion Tab.
    4. Adjust Rotation.
    5. Adjust Scale to eliminate black around the edges.

  • How do I rotate a video clip in iMovie when I am unable to click on the Cropping Button in the Adjust menu?

    Can you help me rotate my video clip in iMovie ?  I followed the instructions in the Help menu, but was stuck on Step 3  - after I had selected the entire Clip and then was unable to click  on the "Cropping Button". 

    Are you in the timeline? You can't access the crop button if the clip is in the browser.

  • How do you rotate a video clip

    Is it possible to rotate a video clip in IMovie or in any other application?

    karenjmccormick wrote:
    Is it possible to rotate a video clip in IMovie or in any other application?
    sure
    http://help.apple.com/imovie/index.html#mov3a884fd3

  • How do i see video clips already imported in to an event?

    How do i see video clips already imported in to an event?
    I have already created and shared one movie project from the clips and from photos but now want to make another. However, when i go to the library it only shows me the content of the first project, including the photos, not all of the video clips i originally imported. I can't believe that I need to import them all again.

    It seems to me that you must have imported your clips using iMovie 9, (that's why they are all in the Events folder which belongs to iMovie 9).  Then you must have upgraded your current project to iMovie 10 which will have put the clips used in that project (but not all the others) into your iMovie 10 library.  iMovie 10 has a totally different storage arrangement for media.  You should be able to update your other iMovie 9 projects by choosing File > Update Projects  and Events in iMovie 10.  See: http://help.apple.com/imovie/mac/10.0.8/#/mov902ad0c31
    This does not stop you from continuing to use the projects in iMovie 9 though any further editing you do will not be transferred to the other version of iMovie.
    Geoff.

  • HT201401 how to rotate a video after recording on my iphone

    how to rotate a video after recording on my iphone?

    Import the video with your computer as with any other digital camera and you can use a video viewing/editing app on your computer to rotate the video.
    For what purpose?

  • How to rotate a Video in WindowsPhone 8.1 Silverlight

    Hi,
    Let me explain my problem.
    I want to record video without shutter sound, so i choice CaptureSource  instead of
    MediaCapture.
    With MediaCapture i can set SetPreviewRotation(VideoRotation) to
    change to rotate of video, the problem is with CaptureSource,
    i can't do that.
    So i looking for some way to rotate a video.
    With library, maybe ffmpeg is the right way, but i can't use it with WP.
    Anyone can tell me how to rotate a video, please ?

    Since you didn't share any code, I hope this works for you. They key here is to rotate the VideoBrush.
    //check if webcam is detected
    if (captureSource.VideoCaptureDevice != null)
    captureSource.Start();
    //RotateTransform
    RotateTransform aRotateTransform = new RotateTransform();
    aRotateTransform.CenterX = 0.5;
    aRotateTransform.CenterY = 0.5;
    aRotateTransform.Angle = 90; //set this value to what you need
    //create a videobrush
    VideoBrush vBrush = new VideoBrush();
    //set the rotate transform to VideoBrush relativetransform
    vBrush.RelativeTransform = aRotateTransform;
    //set it to us the capture source
    vBrush.SetSource(captureSource);
    //fill the rectangle with the video brush contents
    vRect.Fill = vBrush;
    Hope it works.
    Abdulwahab Suleiman

  • Can I rotate a video clip in imovie

    CCan I rotate a video clip in imovie

    Hello Sandra Seaman,
    Thanks for using Apple Support Communities.
    Yes, you can rotate a clip in iMovie.  Check out the link below for instructions.
    Rotate a clip
    Take care,
    Alex H.

  • Can anyone tell me how to make a video clip in color transition?

    Can anyone tell me how to make a video clip in color transition like the opening of "Oh Brother where art though" ?
    You know the scene at the start where it starts off Black and White then as we move down the timeline it transitions to a rusty brown gradually.
    It's on the Apple site for FC Studio as a promo clip.

    how to do a keyframe trasition in the Color FX room
    I realize that you can "add" keyframes to the timeline in COLORFX, but I don't believe they are always observed, and then they usually disappear in retrieved projects, and aren't persistent if you leave the room. To remember where they are... you might mark in a keyframe on those frames in another room as a pathfinder. The behaviour is consistent with a creature of the six-legged variety.
    Method 1. If you are trying to taper the effect (any effect) in COLOR FX, the most linear approach is to render two versions of the clip; one "with", one "without" and do an opacity fade once you have returned them to Final Cut. This gives you the most control, flexibility, repeatability and consistency.
    Method 2. You may attempt to keyframe the bleach bypass settings within the node itself -- the preset that comes with COLOR doesn't have any controls, but the Nattress plugin does.
    Method 3. Set up a "blend" node with your bleach bypass feeding one of the inputs and leave the second input to default to the untreated video... keyframe a transition from "1.00000" to "0.00000" and that should work.
    Note: the keyframe timeline markers will disappear from the timeline if you exit the clip, but the effect is likely to persist. At least that was what was happening a couple of minutes ago... for me, the effect and blend performed the transition just like it was previewing when rendered. This strategy is subject to being created and rendered "on the spot right now", and I advise making sure you have your renderqueue settings ready to go... load the clip from the COLORFX room using the Mac command bar at the top of the screen and render it right away. Don't try to save it for later. Just Do It.
    An announcement went around about two weeks ago that Mr. Deakins' website was back up and running, so give him another try... poor guy has been swamped probably doing Dreamweaver maintenance... yeah, that must be it...
    jPo

  • How i can wacht video clips in my mac and the tv at the same time trough the apple tv

    how i can wacht video clips in my mac and the tv at the same time trough the apple tv

    Welcome to the Apple Community.
    Unfortunately you can't do that.

  • How do I get video clips from Windows 8 to mini ipad

    How do I get video clips from Windows 8 to mini ipad

    You can use a 3rd party app like Photo Transfer App.
    https://itunes.apple.com/sg/app/photo-transfer-app/id365152940?mt=8

  • Nokia 3110 c : How to transfer the Video Clip Fold...

    My handset model is Nokia 3110C. The memory of which is around 32~34 MB. I have installed Memory Card of 2GB. Currently, the Video Clip Folder can accommodate only 8 MB maximim. The Files dowmloaded can not save beyond 8 MB. But my SD can hold upto 50 MB.
    It will be wise to transfer the Video Clip Folder to SD to enhance memory space to 3110C.
    Can any learned user guide me  as to - how  to transfer present Video Clip folder or its contents FROM 'My Galler' Folder TO SD Folder ?
    Thanks     BASAB ROY. 18/9/2010

    Download the OVI Suite from..
    http://europe.nokia.com/support/download-software/nokia-ovi-suite/compatibility-and-download
    .. and install on your PC...
    Connect your Nokia E66 .. select the Envelope Icon in the OVI Suite and select Sync...
    When the process is over all the messages will be seen in the OVI Suite window...
    Now connect Nokia 6730c..
    In the middle window of the OVI Suite you will see 2 tabs ( 1. View Messages arranged by Date and 2.  View messages grouped by contacts).. Make sure that you select the first..
    Drag-and-Drop all messages with Downward Arrow Icon into INBOX in the bottom window ( where you see the Phone icon) and all the Messages with Upward arrow into SENT folders respectively..
    Hope this solves your problem..

Maybe you are looking for

  • MS 5182 Memory

    Hi. This a pretty old motherboard that I'm trying to add memory to. It currently has 64mb, PC100 in there. I've replaced it with 128MB, PC133 and the PC just won't boot. Refuses to recognise the memory. I thought PC133 memory was backward compatable?

  • IDoc to HTTP: Using acknowledgments

    Hi friends. I know the HTTP Adapter does not support acknowledgments. But we had a scenario in which we send an IDoc from SAP and transformed it in a HTTP Call. We get back to the SAP system a aleaud Ack IDoc from PI. It reports that the communicatio

  • SJSWS 7 to Weblogic 10.3

    Hi, I have requirement to reroute request from SJSWS 7 to WLS10.3. A application is installed in 2 managed instances in Weblogic and clustered. Now I need to have SJSWS to reroute the request from two instances of WLS and launch the application. Plea

  • My macnotebook air cam dose not work

    my cam built in macbook air dose not work in anyway mainly started not working in yahoo meenger and skype now face time and photo booth

  • Nested selects in finder query

    Hi! Does anyone know whether one can express nested selects with WL QL or EJB QL? E.g. if one wants to express something like this in a deployment descriptor for an CMP EJB: SELECT * FROM tableA WHERE someID IN      (SELECT someID FROM tableB WHERE s