How to rotate a whole table

Hi,
In a page layout document, I have a table that was created to be read 90°.
Now, I need to bring the table in a normal orientation.
I know how to rotate de text inside the cell but I need to rotate the whole table.
So the header that is actualy the left column become the top row.
I can't figure out out to rotate the table.
I copied and pasted the table outside the page to rotate it. But, when pasted back in the page layout, it still turn 90°.
Does anyone can help me?
Thanks

The only way to rotate an entire table is to rotate the text frame that
the table is in.
So just select the text frame that the table is in, and rotate 90 deg.
You will need to readjust the textframe so that it fits the page margins
again.
Ariel

Similar Messages

How to rotate a large table

I'm building a long technical report with Pages'08.
There are many tables in this report.
This document is in portrait format.
In the middle of this document I have a particularly large
table which can't be read if I try to stay on a portrait
presentation of this table: too many columns (15).
Hence I'd like to find an easy way to either rotate
the page or the table so as to be able to use larger
columns.
I discovered that Pages'08 doesn't permit to put one
page in landscape format. I also abandonned the idea of
using 3 different documents (part 1 in portrait,
part 2 in landscape, part 3 in portrait again).
I have to chain the paragraph numbers.
I have to make a table of content at the end of
this technical report.
What is the most efficient way to manage to fill this large
table.
Word let me do this, but unfortunately it does also
make me spend toomuch time on other simple and basic functions.
Is Pages'09 better on this basic and frequent need (at least for my job)?
<pre>--------
As long as you'll see students making graphics with pen on paper,
you'll see the missing keystone of the software empire.
dan</pre>

Peggy wrote:
You can rotate a floating table, but it can be a problem if you need to edit the table. It will auto-rotate to portrait to edit it but it can be difficult to see or get to the outside edges. I find it easiest to copy & paste the table into a landscape document the copy it back after editing.
Thank you for the nice hint.
I finally choosed to work on a temporary document in A3 format,
and keep it open so as to be able to quickly copy my table in the
main document every time I update it.
During this copy operation I noticed a boring problem:
as the text column in my main document is slightly smaller than my table,
Pages decide to shrink it every time, and I can't recover it's
original size (which I penibly tuned up in my A3 document).
Hence all the cell contents are partially hidden.
The button:
Inspector > Metrics > Original Size
is off.
Do you know how to circumvent this bad habit of Pages to resize my
imported table?
<pre>--------
As long as you'll see students making graphics with pen on paper,
you'll see the missing keystone of the software empire.
dan</pre>

How to make a whole table row be read at once?

Hi,
I want to make a whole table row be read at once by screenreaders if the table is not editable?
I tried to use "getAccessibleSelection" and return a own implementation which returns the number of columns at "getAccessibleSelectionCount".
But if "getAccessibleSelectionCount" return anything else than 1, the method "getAccessibleSelection" is never called.
Does anybody have a idea or a suggestion to solve this problem?
Thanks in advance

Hi AJL,
If you mean a table of data values in the Data Portal, i.e. a list of channels, then yes you can do it. In that case you should just register load the channels you want to be read-only. You can do this interactively by right-clicking on the data file in question and select "Register data". You can also double-click on the file to select individual channels to load or register. Programmatically, this looks like
Call DataFileLoad(DataFilename, DataPluginName, ImportAction)
Setting ImportAction = "Register" will register load the channels. If dragging and dropping the data file loads it correctly, then you can set DataPluginName = "". Otherwise, you can specify there which DataPlugin to use for the import process.
You can also programmatically selectively load some of the channels from the data source:
Call DataFileLoadSel(DataFilename, FileImportFilter, ImportSelection, ImportAction)
The "ImportSelection" parameter works just like the CNo() function in DIAdem:
"GroupName/ChannelName"
"GroupName/[ChannelIndex]"
"[GroupIndex]/ChannelName"
"[GroupIndex]/[ChannelIndex]"
If, on the other hand, you mean a read-only table in the REPORT panel, your options are limited, though you can do that with a SUDialog.
Regards,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.

Hi guys n girls. How do you copy a whole table to create a new table with all cell sizes in tact? Thanks for your help. Jason.
when you copy n paste into a new table, all the cell sizes are changed.
is there a way to put in a new table from your templates into an existing file, different to the standard very basic ones in insert table.
I look forward to your answers. Your help is very much appreciated.
Also how do you search for question answers already written in this support area please.

Hi Jason,
In Numbers 3, you can select a whole table by clicking once in the table to make it active, then click once on the "bull's eye" at the top left.
Now copy and paste. All formatting (and any cell content) is pasted intact. In Numbers 2.3 (Numbers '09) it is a little different for selecting a whole table. But I won't go into that unless you are using Numbers '09. Please reply.
I don't like the look of the tables in Insert Table. I keep custom tables in My Templates. I have set Numbers > Preferences > General > For New Documents > Use template: (name of my favourite custom template)
That opens when I launch Numbers, or ask for a new document (command n). Note that if you follow this preference setting, then Menu > File > New From Template Chooser (for another template) requires you to hold down the option key in that menu.
Regards,
Ian.
Message was edited by: Yellowbox. All formatting (and any cell content) is pasted intact.

How to paste style on whole table and not one cell at a time?

Hi,
I am copying a style and then trying to paste it on a whole table, but it will only allow me to paste the style on each cell separately, and it takes a long time.
Is there a way to paste a style on the whole table?
Thanks,
Shani

Hi Peter,
I am creating shipping labels.
My table is divided like the paper labels in my printer.
I am copying each address directly from my browser (each address on one cell). After I copy all the addresses, I adjust one them to: avenir font 9.5 pt, indents 0.5 first etc, and then I paste this style on each cell separately.
Is there a way to paste the style all together in one time? (I am making shipping labels every day so it is not a one time thing).
Thanks!
Shani

How do I know about the whole tables, sequences, triggers of the specific D

Hello,
I can check the whole tables of the db users with select * from tab; BUT can I know the whole META DATA of tables, sequences, triggers, procedures of a specific user?
Best regards

Raakh wrote:
Hello,
I can check the whole tables of the db users with select * from tab; BUT can I know the whole META DATA of tables, sequences, triggers, procedures of a specific user?
Oracle doesn't expose the metadata just like that but shows it in the various columns of various views based on the object type, for example like for tables, it would be in the user_tables and so on. If you are interested in knowing about the metadata of a specific object, you should use dbms_metadata package.
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e16760/d_metada.htm#ARPLS641
HTH
Aman....

How do you find a table that doesn't have a specific word in it.

I have two questions.
questions 1
How do you find a table that doesn't have a specific word in it by using a query on the whole database?
questions 2
How would i list all of my cars names in my database not showing duplicates?
I have tried, tried and tried some more to get both of these, but I guess i don't know how to query a specific word.
I also don't know how to query everything in just 1 column name.
If anyone could help with these that would be great I have been trying queries for over an hour now and no luck.
Thanks

798837 wrote:
I tried the all_tab_columns, just like you did it, however that just gives me the column name I am looking for what is not in a column.
For example I need to find all the tables where mustang is not = 'red' but using a single query i need to find all of the tables.
As for number 2
I am looking for something like this
select distinct column_name
from all_tab_columns
where column_name ='AcertainColumn';Now I'm even more confused. In your example, is MUSTANG a column name? Or is it the value of a MODEL column in the CARS table? And how could that possibly relate to something that exists in multiple tables?
If your data model is at all reasonable, I would expect that you would just want
SELECT *
FROM cars
WHERE model = 'Mustang'
AND color != 'Red'but I can't see how this would relate to data stored in multiple tables.
Justin

How to find all the tables associated for a particular transaction

Hi-
May I know how to find all the tables, related(foreign key) tables for a transaction within SAP GUI?
Up to my technical knowledge, this can be achieved by looking database diagrams from DB level. But that would be for entire database as a whole. What I'm expecting is to see transaction level relative tables that too from SAP GUI. Please share the possibilities if any.
Regards
Sekhar

Dear Micky Oestreich
May be we possess expertise or high level experience, it should not show up in our way of communication. Every professional starts with the basic stuff to learn. When the question is raised in such minimum polite way, the same level of courtesy is expected in return. If you felt my question was basic, you might have refused it gently. If you are in good mood or bad mood it doesn't matters.
Hi Vengal Rao
Thanks for your response. It helped me.
Regards
Sekhar

How to highlight the whole row of a particular line item of sale

How to highlight the whole row of a particular line item of sales order depending on condition?
Please help its urgent..
Looking forward your reply.
Moderator message: please do more research before asking, show what you have done yourself when asking, do not flag posts as "urgent".
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Aug 9, 2011 9:30 AM

Any ideas on what would cause this NOT to work? I added this row right after the table is created and populated and it is still not highlighted when I enter the form. The snippet of code that does this is:
MyTableModel modelS = (MyTableModel)dataModel.get("S");
jTable1 = new JTable(modelS);
jTable1.setRowSelectionInterval(0,0);MyTableModel is this:
class MyTableModel extends DefaultTableModel {
public MyTableModel(Object[] columnNames, int numRows) {
    super(columnNames, numRows);
public boolean isCellEditable(int row, int column) {
    if (TableKey == 'S') {
      if (column == 6) {
        return false;
    if (TableKey == 'O') {
      if (column == 0 || column == 4 || column == 5) {
        return false;
    if (TableKey == 'P') {
      return false;
return true;
}Can anyone help? Thanks.
Allyson

How to keep together Title + table's line across pages

Hi all, I have a question.
I'm trying to create a .rtf template where I have a table with 4 lines and a title <PROJ_NAME>
I need to repeat this table (with all the necessary information - 4 lines) as many times as the projects' names are stored on the DB.
For example: if the employee has 4 projects, on the report I will see 4 times these table and the relative project name as title.
So, the repeating group mechanism works perfectly, but I am not able to control how the table's lines are splitted across pages....
In other words if I have two pages in my .rtf template and I am at the end of the first page:
1) I don't want to see the title on the bottom of the first page and the relative table above on the second page (title and table splitted on two differents pages)
2) I don't want to see the title and a portion of the table on the bottom of the first page and the rest of the table (1,2 or 3 lines) above on the second page (table splitted on two differents pages)
At the end I'd like to see always title and table together even if the page finishes. If the title + table exced the table's vertical border, it has not be splitted, but rewrite entirely (title + table) on the next page.
The syntax is this:
<?for-each-group:G_PROJ;./PROJ_NAME?><?PROJ_NAME?>
TABLE WITH 4 LINES
<?end for-each-group?>Page break
I tried also, reading the forum, to use the paragraph properties (Keep lines together), but nothing.....
Anyone can suggest me something ?
Thanks in advance
Alex

After the for loop,
take a table (suppose A) with one row and one column. In that table insert the Project name tag. Below that tag, insert an inner table(suppose B) in table A with 4 rows and columns you wish. Now select the outer table A(select the whole table), and in the table properties/Row , in the options , uncheck the 'Allow row to break across pages' property.
end the for loop.

How to rotate a art board in a illustrator using adobe extended javascript

How to rotate a art board in a illustrator using adobe extended javascript
how to create mirror image of each textframe content of artboard

1. there's no "Rotate" function, you have to rotate all your objects and then "resize" your artboard to simulate rotation.
2. there's no "Reflect" function either, to make "mirror" images, use the ScaleMatrix function, see this post
Reflect whole objects

Linked images in a table showing visted and messing with the the whole table

Help Please.
I have never had this happen in any other version of dreamweaver. Using dreamweaver CC right now.
I have an image created in photoshop. cut into slices. load the html and images into dreamweaver. Dreamweaver then creates a table. If i upload just like that, site looks fine. Once I choose an image slice, create a link to it and then upload the site, there is a purple border around the image therefore wrecking my whole table. The site shows breaks between each image slice.
THank you

The only real advice I can give, that will help you in the long run, would be to take some time to learn at least the basics of html and css. Photoshop's way of doing things will almost always blow your site to pieces as soon as you start changing content around. To create professional websites with DW, you are expected to understand HTML and CSS (and to a lesser degree, javascript). Without a firm understanding of HTML and CSS though, little issues like the IE border problem can become huge problems.
There are tons of places online to get tutorials on all of this, I personally like the following links, for the basics...
HTML: http://w3schools.com/html
CSS: http://w3schools.com/css
Once you understand what's going on behind the scenes in DW, it's much easier to work with the program. Once you understand how to work with the code the program gives you, Photoshop can be left to do the work it was designed for, image manipulation.

How to display a oracle table from a java program?

How to display a oracle table from a java program.
Hello friends, I have written a Java program, using oracle 10g as backend.
I want to display a oracle table as output. Im not getting how to display oracle table as a output table.. Pls help me
Thank you

jayanthds, you're not going to get a satisfactory
answer to this here. it's too big a task to justbe
quickly outlined in a forum - the reply "all youneed
to do is to query you table and return it asJTable"
is worthless, for example, since the solution to
any problem can be distilled to such a
soundbite, if need be. doesn't make the solutionany
simpler
essentially you're asking "how do I write adatabase
application?". all you'll get is snippets of code
that, when fitted together, will eventually helpyou
do this, but you'll spend days and days comingback
saying "right, I've done that, now what?" until
either you or the forum gets frustrated with the
whole affair and the process stops
there are entire books written about this subject,
and countless tutorials and guides on theinternet.
you're better off going down that routehehehe.well, it's true! I used to have a manager that would outline the solution to a problem in a few lines of pseudocode, and then firmly believe that the actual solution would be just as brief and simple. shame his pseudocode included such lofty abstractions as "reformat all data"

How to Rotating the Bulge effect.... Stumped

I was looking at a tutorial
http://library.creativecow.net/articles/rabinowitz_aharon/displacement1/video-tutorial.php
on using the displacement effect. I started experimenting on my own using the Bulge effect to animate the layer that is to be used as the displacement source. If you want to follow exactly what I was working with, it was number 4, the Expand Output composition.
I applied the bulge effecty to the Test Layer with the setting of Horizontal Radius 33; Vertical Radius 167, and a Bulge Height of 4. I animated the effect by setting keyframes for the Bulge Center. Then I duplicated the effect and changed the Horizontal Radius to 33 and the Vertical Radius to 167. What I ended up with was a + (Plus sign) looking shape that animated over the layer, which is what I wanted. I precomposed the layer and used it as the displacement map layer.
But then I wanted the rotate the Plus sign so that it would be like and "X" instead. but there is no way to adjust for that in the Bulge controlls. So I applied the Transform effect to the Test Layer to rotate it but I rotates the whole layer including the word Test, I got the X shape that I was looking for but I did not want to put the Test on a 45 degree slant.
Any suggestions on how to rotate the Bulge effect. I thought that it may have something to do with the Pin All Edges, I didnt see anything change with it on or off.
Cris

Unfortunately there is no intuitive way to do this. It's one more time where you will have to pre-compose. Rotatte the footage in teh pre-comp, apply the bulge on top of it using an adjustment layer. Put the pre-comp in teh main comp, then un-rotate it. I believe that will give you the kind of distortion I think you are looking for.
Mylenium

How to populate data in table control .

hi all,
i put matnr no. in screen no. 103
validation is done at that screen only.
now when i want to modify dat record
when i put matnr no. at screen 103
so how i will get all data of dat number to table control screen.

Hi Darshan,
Here is a detailed description of how to update data in table controll.
Updating data in table control
The ABAP language provides two mechanisms for loading the table control with data from the internal table and then storing the altered rows of the table control back to the internal table.
Method 1: Read the internal table into the Table Control in the screenu2019s flow logic. Used when the names of the Table Control fields are based on fields of the internal table.
Method 2: Read the internal table into the Table Control in the module pool code. Used when the names of the Table Control fields are based on fields of the database table.
Method 1 (table control fields = itab fields)
In the flow logic we can read an internal table using the LOOP statement. Define the reference to the relevant able control by specifying WITH CONTROL <ctrl>
Determine which table entry is to be read by specifying CURSOR <ctrl>-CURRENT_LINE.
After the read operation the field contents are placed in the header line of the internal table. If the fields in the table control have the same name as the internal they will be filled automatically. Otherwise we need to write a module to transfer the internal table fields to the screen fields.
We must reflect any changes the user makes to the fields of the table control in the internal table otherwise they will not appear when the screen is redisplayed after PBO processing, (eg, after the user presses Enter or scrolls) However, this processing should be performed only if changes have actually been made to the screen fields of the table control (hence the use of the ON REQUEST)
PROCESS BEFORE OUTPUT.
LOOP AT ITAB_REG WITH CONTROL TCREG
CURSOR TCREG-CURRENT_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
MODULE MODIFY_ITAB_REG.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2 (table control fields = dict. fields)
If using a LOOP statement without an internal table in the flow logic, we must read the data in a PBO module which is called each time the loop is processed.
Since, in this case, the system cannot determine the number of internal table entries itself, we must use the EXIT FROM STEP-LOOP statement to ensure that no blank lines are displayed in the table control if there are no more corresponding entries in the internal table.
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TCREG.
MODULE READ_ITAB_REG.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG
ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE READ_ITAB_REG OUTPUT.
READ TABLE ITAB_REG INDEX TCREG-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING ITAB_REREG TO TCREG.
ELSE.
EXIT FROM STEP-LOOP.
ENDIF.
ENDMODULE.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
MODIFY ITAB_REG INDEX
TCREG-CURRENT_LINE.
ENDMODULE.
Updating the internal table
Method 1
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: TCREG-REG,
TCREG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Updating the database
MODULE USER_COMMAND_100.
CASE OK_CODE.
WHEN u2018SAVEu2019.
LOOP AT ITAB-REG.
CHECK ITAB_REG-MARK = u2018Xu2019.
MOVE-CORRESPONDING ITAB_REG TO TCREG.
UPDATE TCREG.
ENDLOOP.
WHEN u2026
u2026
ENDCASE.
ENDMODULE.
Hope this will solve your problem.
Regards,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Aug 3, 2009 12:48 PM

How to rotate a whole table

Similar Messages

Maybe you are looking for