How to route phonecalls through the car speakers?

Hi
Just bought iCarkit/Allkit FM transmitter/handsfree holder for Iphone.
I have a Iphone 3GS 16 gb.
I've managed to get the ipod music thru the car speakers BUT not phonecalls.
Could anyone please help me?
Best regards
Per from Norway

I played with it yesterday. The phone directs sound back out of the phone's speak when it is connected to the FM transmitter via the charging cable, but if you use the audio jack connector then voice will come out of the car stereo and the phone's microphone is sensitive enough for this to work. It is a bit of a pain though so I won't bother with this.
I didn't get any instructions with my unit I can not figure out how to set the presets. To be honest at the moment I am just using it as a holder for the phone as the beeping was driving me crazy. When the unit was plugged into my phone it seems to stop and start charging every few seconds causing it to keep going back to the battery indicator if left at the home screen - I thought this was probably not good for the phone.
http://forums.ilounge.com/showthread.php?t=232756
Here's the related posting on that.

Similar Messages

  • I have a Honday FIT 2013 with the USB for iPod and the Auxillary jack. I plan to purchase an iPhone 5c. Can I listen to music from my iPhone through my car speakers?

    I have a Honday FIT 2013 with the USB for iPod and the Auxillary jack. I plan to purchase an iPhone 5c. Can I listen to music from my iPhone through my car speakers?

    Click the "Upgrade Eligibility" link on the right side (under "Learn more about buying iPhone) here:
    http://store.apple.com/us/buy-iphone/iphone5s
    If you're not eligible for upgrade, it will tell you how much more than US$199 you will be charged.

  • I plug my 4S into a transmitter to listen through my car speakers. The phone gets hot, is this normal?

    I used a radio transmitter connected to my 4S to listen to music through my car speakers, but the phone gets hot.  Is this  normal?

    Yes it is. It is usual for your phone to get hot (not to the point where it burns, but noticably warmer) whenever it's charging, playing music, or using an app that takes a lot of power (like navigation). Especially in a car, where the ambient temperature can get pretty hot.
    As long as it doesn't hurt to hold your phone or the phone doesn't give you a temperature warning then it's normal.

  • HT204370 how do i get the movie sound to play through the TV speakers, It is connected to my mac bookpro but the sound only comes through my macbook pro

    how do i get the movie sound to play through the TV speakers when watching a movie from Itunes, It is connected to my macbook pro but the sound only comes through my macbook pro.
    Thanks

    Transfer the movie from your iPad to your MacBook then. =)
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296

  • When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working, help!

    When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working. help!

    I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
    Why are you posting in this forum about what occured with an independent service provider?  How is is at all relevant to Apple??  In fact, service by any person or business not authorized by Apple voids any waranty.

  • I have Mac mini and I'm trying to listen to music through YouTube it works. But my problem is that instead of the music playing through the tv speakers it plays through the Mac box. ):

    I have Mac mini and I'm trying to listen to music through YouTube it works. But my problem is that instead of the music playing through the tv speakers it plays through the Mac box. ):

    Are you using HDMI or an Apple Airplay Module to go to the TV Speakers?
    If you are using an HDMI it's straight through output. The internal speakers are disabled.
    If you are using an Airplay Module:
    - Go on iTunes
    - Locate the Airplay icon that has a TV with an up arrow icon much like your iPhone has for Bluetooth
    - Click on that and Airplay to ModuleName

  • How to download firework through the adobe assistant

    how to download firework through the adobe assistant

    You should be able to add the download to the Adobe Download Assistant by choosing the download option at http://www.adobe.com/cfusion/tdrc/index.cfm?product=fireworks.

  • Multi-record block (how do I loop through the block)

    I created a two canvas form. On the first canvas, the user enters data and selects 1 - 30
    reports that they want to run. When they click on <NEXT> button, I create a multi-record
    control block and display each record on the second screen using
    go_block;
    clear_block;
    move data;
    create_record;
    The user then selects on the second canvas which reports to run now and which to run later via
    a LOV. When they press the <RUN> button, I want to start at the first record and either run the
    report or schedule it. Then I want to move onto the second and the third until all selected reports
    have been handled. I know I should use a loop but can't seem to make it work.
    So my question is, How do I loop through the records in a multi-record control block, pass the information
    for that one record to a parameter form and then execute the request? Each control block record contains
    10 parameter fields.
    Thanks.
    Bob

    go_record(1);
    << do your processing >> -- This is executed only for the first record.
    if :system.last_record = 'TRUE' then -- If the 1st record is also the last record.
    RETURN;
    end if;
    LOOP
    next_record;
    << do your processing >>
    if :system.last_record = 'TRUE' then
    EXIT;
    end if;
    END LOOP;
    I created a two canvas form. On the first canvas, the user enters data and selects 1 - 30
    reports that they want to run. When they click on <NEXT> button, I create a multi-record
    control block and display each record on the second screen using
    go_block;
    clear_block;
    move data;
    create_record;
    The user then selects on the second canvas which reports to run now and which to run later via
    a LOV. When they press the <RUN> button, I want to start at the first record and either run the
    report or schedule it. Then I want to move onto the second and the third until all selected reports
    have been handled. I know I should use a loop but can't seem to make it work.
    So my question is, How do I loop through the records in a multi-record control block, pass the information
    for that one record to a parameter form and then execute the request? Each control block record contains
    10 parameter fields.
    Thanks.
    Bob

  • Command how many mails when through the mailstore for a specific domain.

    I need to get info from the maillog to see how many mails when through the mailstore for a specific domain.
    For example all the mails send and received by example.com witch is hosted on that 2005q1 mailserver.
    Anyone know the commands to get it out.

    The data is certainly in the mail.log.
    You may want to start with the perl log parsing script, here:
    http://ims.balius.com/resources/downloads/files/imslog.pl

  • How to play music through headphones Macbook speakers AT SAME TIME

    I have a macbook using OS 10.4 and I have been listening to music. I want to hear my music through the internal speakers and through headphones at the same time.
    The reason is... I like to sing to my music. But it sounds odd for others around if they can't hear. So I need to play it out loud. However, there are certain times (like right now) when there is too much background noise for me to hear my music well and I'd like to be able to drown it out. So I want to hear the music through my headphones. While still having it come out the speakers.. so those round hear it too.
    There really should be a way to do this, and I don't see why there wouldn't be. If there is a logical reason why one can't do this, then please inform me. If you know fo a way to accomplish it, then tell me please!

    I'm looking for a similar capability except by using software only.
    I want to be able to get sound from a single application out to two
    or more audio-output devices.
    Is there any third-party software available to do this?
    As an aside, MacOS almost lets one do this now with the existing
    audio plumbing capability, but it comes up just short of being
    able to do it.
    Thanks for any third-party software pointers or suggestions.
    Dave

  • After updating to iOS 8.3 on my iPhone 6, Blu Logic bluetooth calls with a charging phone in my car do not go through the car's speakers.  Siri's message now adds, "....calling _______on speaker."

    Blu Logic bluetooth calls using "Hey, Sir" do not go through my car's speakers since updating to iOS 8.3.  They are routed through the iPhone 6 speaker after Siri says, "....calling ________ on speaker."  The "on speaker" term was never used before.  The Blu Logic bluetooth unit is an aftermarket device installed in a 2005 Buick LaCrosse.  It worked perfectly until the iOS 8.3 update.

    OldGnome: 
    Blu Logic seems to keep a virtually invisible support presence on the internet.  I did return to the aftermarket installer of the unit.  He told me pretty much the same as you.  Apple expects the equip. manufacturers to keep up with iOS.  It's a bit of a Catch-22.  Perhaps iOS 9 will exterminate the bugs!!
    In the meantime, the only thing I've really lost is hands-free dialing for bluetooth calls in my car.

  • I have a 2011 Kia Sorento with hands free bluetooth.  I can select where the music can be played, to the Sorento, but the music does not come through the bluetooth speakers in the Sorento.  Am I missing an app for that?  What am I doing wrong?

    I have trying to connect my iTunes music through my bluetooth in my Kia Sorento.  I have paired the phone with the bluetooth, but now the phone will not even connect, let along having the music play through.  Do I need a special app for that?  Was something dropped or lost from my iPhone to where no connection, phone or music, will play through the bluetooth to the speakers in the car? 

    It should work just fine. Try deleting the pairing in the car and on the phone, then re-pair them. It works fine in my 2011 Optima (with the non-nav system) after upgrading to iOS 5.
    Make sure there is no other bluetooth connection active when you start the car to connect to it (like a headset).

  • I have synced my macbook pro with new bluetooth speakers and can successfully play internet radio music from my macbook through bluetooth.  However I cannot get my iTunes library playing through the bluetooth speakers.  Can anyone help?

    my macbook pro is successfully linked to bluetooth speakers and I can stream music from the macbook through the speakers.  Except for iTunes.  iTunes will not allow me to select the bluetooth, only 'computer speakers' or 'apple tv'.  I can stream my iTunes library from my iPhone and iPad through these speakers, but not from the MacBook's iTunes.  Is there an easy solution?

    So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
    Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
    Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

  • Is there a way to play music through the internal speakers and external speakers at the same time?

    I have iHome speakers and would like to listen to my music through them and the internal speakers of my Macbook pro at the same time.

    More information:
    https://discussions.apple.com/thread/2609977

  • TS1425 purchased the new Muse album last week, put into nano but since then it wont work in my car through the cars system, it shows menus on the car screen but no sound

    loaded newly purchased Muse album into Nano and since then my nano wont play in my car, the cars screen lists album and track details but there is no sound?

    Did it used to work previously?  Have you tried resetting teh Nano to see if that helps?
    How to reset iPod
    B-rock

Maybe you are looking for