How to route the sounds?

I want to route a few instuments inputs into one bus then use an insert effect and send it into the main output. any ideas?

I want to route a few instuments inputs into one bus then use an insert effect and send it into the main output. any ideas?
Yes, Where it says "output 1-2" above the meter display of each channel just set that to Bus 1. Go to bus 1 and add the insert. Verify bus 1 is outputting to output 1-2 (or whatever you use as Master)
J

Similar Messages

Just got fcp, how do mute the sound on the video clip so it does not come through the audio track?

just got fcp, how do mute the sound on the video clip so it does not come through the audio track?
Please help

Don't edit the audio into the timeline. Or pull the audio level down to zero in the inspector or on the audio waveform in the timeline.

HT1338 how to route the mails directly to the folders in MS Office

I need to know how to route the messages to folders from In Box once they arrived in MS Office. I tried by applying rules but its not working.

Hi,
we can check the multiline present in receiver determination and specify the condition for both US an UK receiver systems.
Or if you are sure that only two (UK and US) will come , then check the condition for Say UK and check the defualt reciver system in case of failure ,if its US it will go to the default system.
You can also try out the interface determination condition, please check if below links can help.
How to write Conditions in Interface Determination for 2 IDOCs
Single File to multiple IDoc
Reciever idoc adapter Determination error
Regards,
Srini

How to close the Sound object

I'm using Flash CS3, running code in ActionScript 3.
I use the Loader class to load a child SWF file, which then
takes over the entire area on my website that is reserved for
Flash. If the user decides to stop watching the SWF file before it
is completed, he hits the "close" button within the child SWF,
ultimately causing the Loader.unload() method to be executed. So
far, so good, only the sound from the remaining portion of the SWF
file keeps playing. According to the Flash Docs for the
Loader.unload() method:
"As a best practice, before you unload a child SWF file, you
should explicitly close any streams in the child SWF file's
objects, such as LocalConnection, NetConnection, NetStream, and
Sound objects. Otherwise, audio in the child SWF file might
continue to play, even though the child SWF file was unloaded."
It then gives an example that assumes you already have access
to the Sound object, so closing the Sound object is done by:
mySound.close();
The only problem is that I have no idea how to access the
Sound object when I use the Loader.load() method. Where is this
beast? I can't seem to find anything in the documentation that
tells me how to find the Sound object after calling Loader.load().
As a temporary fix, I modified the target SWF file so that when the
"close" button is hit, it calls the "stop()" function; however,
this only stops the sound, it does not close the associated Sound
object, and I presume it continues to lurk around in memory with
nothing useful to do. (When the user hits the "close" button in the
child SWF file, it creates a "bubbling" event so that the Loader
class can call the Loader.unload() method on it.)
I've attached code for your reference.
Any help is deeply appreciated!
-Dan

Ack! Looks like I hijacked this thread, sorry.
I'm doing almost exactly the same thing the OP is doing...
Loader class to load an external SWF (which is a video file FLV).
If the user hits the "close" button on the video, the video goes
away as it should but the audio continues.
I understand that I need to close any NetConnection and
NetStream objects in addition to unloading the movie. What I don't
understand is how to do that. I'm sure that it's a syntax thing I'm
just not getting right. I would just really like a more detailed
explanation of stopping NetConnections and NetStreams (but an
explanation for the not-so-actionscript-experienced LOL).
Thanks.

How to route the file, base on the file name without touching file content?

Hi All,
can you please provide me solution how to route the file based on file name with out touching file content.
Business criteria :
> One source directory having zip files with different file names
> File adapter have to pick the zip files and have to route it to different email addresses based on fist 5 characters of file name.
please provide possible solutions to route the zip files to target.
Regards,
Sreeramulu Konjeti.

You can use Standard context object FILENAME.
in receiver determination Put a condition based on standard context object FileNAME
In the receiver determination, in the condition channel, use the Technical context object 'FileName' for file adapter.
Follow the below path:
Goto Receiver Detrmination --> Condition --> Left Operand f1 Help --> select first option 'Context Object' --> 1 List will be popped up --> Select FileName for File adapter from that list
It will route the file based on filename.
You can use CP for contains pattern (u2248) in condition
FileNAME u2248 ABCFI*

How do change the sound level input at the premiere cs6

Hello:
I would like to know how to change the sound level input al the premiere cs6?.
Sincerely, Gabriel Conde

The input sound levels will be determined by the media files you use. The output volume can be adjusted in several ways.
https://helpx.adobe.com/x-productkb/global/offline-help.html

Satellite P500 - Solution how to run the sound on XP 32bit and 64bit

hi all..
Now I write here how I made something that seems impossible ...
I mean running sound on a laptop satellite/ qosmio p500/505 300/500
and other models with the Conexant high definition sound card on Windows XP x32/x64 sp2/sp3 ..
I know that many of us have a problem to run any sound at all,
the basic problem is that Windows XP does not have a built-in driver files
are responsible for recognition of the latest sound cards based on high-definition audio.
Last patch to the system kb888111 released by Microsoft aimed to fix this problem was released in 2005
and is not contained in the files that recognize the latest Conexant sound card.
next problem is correct driver. Toshiba has not released XP drivers for the Conexant sound card
for laptop qosmio / satellite 500 / 505 , so you should find and use the drivers from
the manufacturers of other models of computers. most of the drivers and the best have to download Lenovo and Dell.
Personally I used to run the sound in my P500 drivers Downloaded from the Dell web site
most important in the downloaded drivers, then you want to install is to edit .INF file which can be found in the folder
with drivers. This file is a text file so edit it in notepad.
edition .INF file is trailing in the path identifying our equipment.
hardware ID can be found for example in the device manager tab in sound, video and games controllers.
for most newer toshiba laptop hardware id is :
%HdAudioFunctionDriver.Pebble5071.DeviceDesc% = HdAudModel,HDAUDIO\FUNC_01&VEN_14F1&DEV_5069&SUBSY S_1179FFD4
but it may vary so please check it in your computer !!!
Those who managed to run the sound will certainly have to contend with another problem,
after restarting the computer has no sound and the computer loses the drivers and settings
and next to the watch does not appear on the speaker icon.This problem is also solved by me below.
Now to work ..
I assume that you have already installed XP x32 or x64, but not yet run a sound.
to run the sound, install the driver from the chipset, then the patch kb888111.
If all goes well,
in the device manager tab system devices you should found 2 entries "Microsoft UAA Bus Driver for High Definition Audio"
where are those 2 entries, click on each of them, right-click and select "update driver"
then you select "instal from a list or specific location" and then point the location where you saved the
files that you downloaded from the link No. 1
REMEMBER not to confuse and do not try to update the x32 system using file system designed for X64 and vice versa
when we make updates to the system should automatically detect the sound card in Device Manager should be about
5 yellow question marks, four belong to the Nvidia high-definition audio and one for the Conexant High Definition Audio.
Now install the driver from the Nvidia graphics card which contains the sound driver. after installation reboot
after restarting the computer. enter the device manager and there is no longer 5 yellow question marks,
is the only one this one belongs to the Conexant sound card, Right-click on this one yellow entry and
select "update driver" then you select "instal from a list or specific location"
and then point the location where you saved the files that you downloaded from the link No.2
pointing hand and forces the driver installation. after installation, you enjoy the sound.
REMEMBER not to confuse and do not try to update the x32 system using file system designed for X64 and vice versa
link No. 2, includes drivers which I have edited and which I myself use
in my Toshiba Satellite P500-1CG. these are the drivers for XP x32 and x64 sp2/sp3
link no. 1 http://www.speedyshare.com/files/23583256/UAA_BUS_DRIVER_update.rar
link no. 2 http://www.speedyshare.com/files/23583437/xp_pebble_drivers_for_toshiba.rar

believe that this solution will also work with other models of Toshiba computers that have built-in sound card Conexant. Ultimately, it will be only a matter of editing a text file. INF driver sound in which you will need to add before installation, your hardware id. and all that. enjoy

Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

How to route the information to approver with out involving sap workflows.

Hi Developers,
i have a doubt regarding how the requester filled form information will be send to approver with out involving SAP workflows in the portal.
Normally i know the procedure where users fills the form with the approver details, the filled information is routed to approver UWL by trigerring a function module thru webdynpro.
But i need to know is there any procedure to route the information without involving any backends.
Thanks in Advance.

Michele is correct - sneep will help you get the serial from the running domain on the M3000 ,
and it is a good idea to install STB on your machines.
If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
I believe that on this platform, sneep gets the serial from the output of prtconf.
There is a minor correction to be made :
After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
man -M /opt/SUNWsneep/man sneep
with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
that you will find on the physical serial tag.
The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command.

How to route the Idoc to Two Different Locations based on the Plant Values

Hi All,
We will generate single Idoc, in that we will have 2 E1MARCM segments, one will have UK plant and another will have US plant.
Now in XI, receiver determination i need to route the idoc to corresponding folders.
How can we do this, because in x-path, we can check always for the first segment only, second segment will not come into picture.
Please suggest me

Hi,
we can check the multiline present in receiver determination and specify the condition for both US an UK receiver systems.
Or if you are sure that only two (UK and US) will come , then check the condition for Say UK and check the defualt reciver system in case of failure ,if its US it will go to the default system.
You can also try out the interface determination condition, please check if below links can help.
How to write Conditions in Interface Determination for 2 IDOCs
Single File to multiple IDoc
Reciever idoc adapter Determination error
Regards,
Srini

How to route the ctr0 in DAQ MX for PXI 6229?

Hello,
The counter ctr0 of the PXI 6229 is internally wired to PFI12.
How could i change the terminal on which this counter is wired? What is the function in LabWindows CVI 7.1 (NI_DAQ MX 7.3) should be used? Is there any example of this? (in all the CVI example the fact that we have to connect the counter to a terminal is just mentioned)
Thanks for your help!
guyom

You can change the output terminal on M Series devices using the following function:
int32 __CFUNC DAQmxSetCOPulseTerm(TaskHandle taskHandle, const char channel[], const char *data);
On M Series devices you can route the output of a counter to any PFI line.
I hope this helps!
gus....

How to disable the sound on all computers - Unix Command?

Does anyone know the Unix Shell command for "output muted"?

I thought about that - they are already managed - I want to have internet access without any sound if they go to videos and music sites. How could I disable them from changing the sound?

How to separate the sound on my headphone jacks?

hi. I have an hp pavillion dv6-6c50se Entertainment Notebook, and I'm using "Traktor 2" mixing software. in order to hear separate sounds from my headphones and the external speaker, I need the sound driver to recognize them as separate devices(beats audio which is two-channel and has two headphone jacks) . In fact , I can't separate them to have the monitoring sound in my headphones and the master, in speakers. The device can only separate the sound between internal speaker and headphones(or speakers) which are connected to it. So, how should I do it? (maybe muting the built-in speaker and transfer it's sound to the external speaker in some way? )
thanks

Hello pkr_legend,
Take a look at these symptoms and see if the troubleshooting steps help to resolve your issues. Please let me know.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How to get the sound to play in a widget through an LMS?

Mac operating systerm
Captivate 6
I have files that are aggregated. My reporting is set to SCORM 1.2. I know my project is not SCORM compliant. My project plays and transitions when in the LMS however when I get to the widget for my history sections no sound is produced. I have two widgets that do not play sound. Is there something I can do to make the sound play? I've inserted the sound into the widgets as normal.
Please any advice would be appreciated.
Thanks,
Maree

okay I have version 6.02.325
Dumb question but I have to ask it...If the frame is paused how do I go in and un-pause it?Also, I may have caused the pause because I inserted a "button" on the slide so that the slide would not advance automatically. As you well know inserting a button and adding it to the top of your timeline making it clear in color sets it up as a pause button. Does that mean if I take that button out my audio will work? And if that makes my audio work will my slide then automatically advance to the next slide?
So many questions....

How to record the sound from a website on Satellite A100-307

I have a Satellite A100-307.
Audio record properties show only CD, Micro and Line as possible inputs
I want to record sounds (music) which I hear when I visit sites on the Internet
On other PC's, I select the Wave or Wave/MP3 input and it works
I Cannot find this option on my PC
Please help by indicating how to solve this problem
Thanks in advance
gbonamy

Hi
What sound card was installed on other notebooks??
I have got 2 notebooks at home. One Satellite and one from other manufacture but I do not found such option like you have described.
There is no recording from the wave or mp3. The sound card does not support such function.
I think its not possible to record from other audio source. I think you can only use the external micro jack as a recording source because the line-in jack is not available on this unit.

How to route the sounds?

Similar Messages

Maybe you are looking for