How to run a .bin file?

I need to upgrade my router to be compatible with Win 7.  However, I have no idea how to open a .bin file.  Can anyone help me?
Thanks,

I agree with GV, you don't need to open the firmware file (.bin). There is a certain procedure to upgrade that firmware file on your Router... Follow the steps bellow...
Open an Internet Explorer browser page on a computer hard wired to the router...In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Similar Messages

  • How to run a jar file in JBuilder

    Hi there
    I need to know how to run a jar file using JBuilder. Thanks :)
    Countess

    well i have a german version of jbuilder and there it is under
    experten Archiv-builder
    look at something that has a similar name

  • How to run a JAR file in Unix system?

    hi there
    ca anyone tell me how to run a JAR file in unix system or X window, thank you

    You want to create an executable JAR file? You do it in the following way.
    Create a manifest file such as manif.txt and the contents should contain
    Main-Class: foo
    assuming foo is the name of your main class. Then create the jar as follows
    jar cvfm foo.jar manif.txt foo.class
    I hope that helps you!
    you can find more info here http://java.sun.com/docs/books/tutorial/jar/

  • How to run an exe file in a java program

    Hi,
    Can somebody tell me how to run an exe file in a java program.
    Thank you!

    Yes, java.lang.Runtime.exec().
    Read this carefully before you do:
    http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
    Don't write a line of code before you're reviewed and understood the article completely. - MOD

  • How to run a batch file as windows Nt service

    Hi friends
    I want to know how to run a batch file as windows NT service.
    I got some information in the following link
    http://support.microsoft.com/kb/q243486/
    I tried it but i want to know what we need to include in Autoexnt.bat
    And one thing i need Instexnt.exe file. I cannot find tht file.
    Please search tht file and send me tht file or else send the link in which this file is present
    Please give me reply fast.its very urgent.
    Thanks in advance.

    Hi,
    My aim is to run a MS-DOS Batch file, that I created to run a Java Prgram.
    I need to call the Batch File from the Oracle Procedure, Also I may need to change the content of the Batch File (Argument to the Java JAR File ).
    I can keep the JAR FIle either in the Oracle Server or in the Application Server.
    The Java program is to convert XML Format FIle to PDF and MS Word format.
    Oracle Version : 10g 2.0.1.0.
    Thanks in advance
    Rizly

  • How to run a batch file

    Hi,
    How to run a batch file from Oracle. Is it possible directly from PLSQl, or should I write the java code.
    Oracle Version: 10g 2.0.1.0.
    Thanks in advance
    Rizly

    Hi,
    My aim is to run a MS-DOS Batch file, that I created to run a Java Prgram.
    I need to call the Batch File from the Oracle Procedure, Also I may need to change the content of the Batch File (Argument to the Java JAR File ).
    I can keep the JAR FIle either in the Oracle Server or in the Application Server.
    The Java program is to convert XML Format FIle to PDF and MS Word format.
    Oracle Version : 10g 2.0.1.0.
    Thanks in advance
    Rizly

  • How to run the batch files

    Hi Experts,
    I am trying to implement automatic cache purging every day at specified time and i created txt file with SApurge All cache() and created bat file with nqcmd -q Analyticsweb -u username -p password -s (txt file location).
    Now i want to run this bat file daily at specified time with out executing manually may i know how to run the batch file at specified time .
    Thanks,

    There is task type as command in workflow manager if you want you can go for that during the load
    nqcmd -d "AnalyticsWeb" -u Administrator -p Administrator -s "D:\PowerCenter8.1.1\server\infa_shared\SrcFiles\1_BIPurgeCache.txt"
    Check these urls
    http://docs.oracle.com/cd/E12103_01/books/AnySched/AnySched_Scripts3.html
    http://deliverbi.blogspot.com/2011/12/purge-all-cache-from-dashboard.html

  • How to run a jar file

    hi
    can anybody tell me how to run a jar file in java,is there any need to unzip a jar file before running it?
    Thanks in advance.

    Set the classptha, if you want to run it by double clicking.
    I assume that you know, how to set the classpath.I though that if it is an executable jar, the classpath environment variable will be completely ignored. Are you saying something to the contrary?

  • How to run a batch file clicking a button?

    Hi All,
    Can you tell me anyone how to run a batch file clicking a button? And also the progress bar showing the progress.
    Arif

    As said: write the insert statement like above (of course replace the databaselink, column and table names with your own) in a stored procedure and call this procedure in the WHEN-BUTTON-PRESSED Trigger.
    As for the progress bar: how many records are you processing and how is the network connection between your database server? As above method is rather fast it might take just a few seconds and you could spare you the progress bar (this might be a little tricky to implement).
    cheers

  • How to run start.sh file of Tomcat4.0.1 on Mac os 8.6

    Hi there,
    Iam new to Mac operating system and iam trying to work on Mac os 8.6.I am trying to install Tomcat on Mac os 8.6.For that I download jakarta-tomcat-4.0.1.tar from appache site.I also extract it in my desktopfolder directly.For running start.sh file I prepare my own Tomcat_Start.sh like that:-
    (#!/bin/sh
    export CATALINA_HOME=/sun/desktopfolder/jakarta-tomcat-4.0.1
    export JAVA_HOME=/sun/desktopfolder/MRJSDK 2.2/Tools/JDK Tools)
    In Mac os 8.6 I installed MRJ2.2.4(based on jdk1.1.8) and MRJ SDK 2.2 for Java runtime enviornment.I tried with one java file and it is working perfectly that means JVM working perfectly.But I don't know how I run this Tomcat_Start.sh file on Mac.I already worked with Tomact on Windows operating system.In windows I excecute start.bat file on Dos-prompt.Can any one tell how and where I can execute my Tomcat_Strat.sh file on Mac os 8.6.And which version of Tomact support MRJ2.2.4 which is based on jdk1.1.8. It is required for my one application to install Tomcat on Mac.Presently Iam working On WinNT4.0.Any Help will be highly appreciated.
    Thanks for ur Valuable Time
    Bikash

    Iam new to Mac operating system and iam trying to work
    on Mac os 8.6.I am trying to install Tomcat on Mac os
    8.6.For that I download jakarta-tomcat-4.0.1.tar from
    appache site.I also extract it in my desktopfolder
    directly.For running start.sh file I prepare my own
    Tomcat_Start.sh like that:-.sh files are usually Shell scripts for UNIX shells. I don't think Mac OS 8.6 has a shell interpreter (could be wrong. :/) so getting it to work is going to be difficult, if not impossible.
    If you have Mac OS X, however, I believe it could work on there. Not sure of exact details though.
    Bhav

  • How to output executable Bin file under linux from java

    Hi
    im beginner in java under linux and i want to out put my java programs to be bin files that can run
    if this not possilble
    how to run the output jar files with just double click ?
    does i have to run sh file that do the hob how?
    thanks in advance.

    say your main method (application's entry point) is located in a class com.my.Class,
    then first you create a text file (say, manifest.txt) that contains this line:
    Main-Class: com.my.Class
    [/code}
    and then you append this to the jar's manifest as such:
    jar cfm yourjarfile.jar manifest.txt [additional files you might want to add]
    for more info,
    http://java.sun.com/docs/books/tutorial/deployment/jar/manifestindex.html                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to run a python file on Safari?

    Good day,
    I am trying to run any python file on the Leopard web server, accesing it via safari.
    also I have set the permissions of the file to 777...
    then I have copied the file to library/webserver/documents.When I open this file in Safari, the file is listed, but it is not executed.
    also I have copied the file to library/webserver/cgi-executables, but the file is not executed, an error appears:
    Internal Server Error
    The server encountered an internal error or misconfiguration and was unable to complete your request.
    Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
    More information about this error may be available in the server error log
    the python file contains only 2 lines:
    #!/usr/bin/env python
    print 2
    I have tested the file in the command line via python test.py and it runs fine... but I dont know what should I have to do to run it on the browser...
    do I have to enable mime types for python on leopard client? how to do it?
    have a nice day

    Karl Zimmerman wrote:
    Note that the script you've given doesn't produce a valid HTML page. How your browser chooses to render '2' is undefined. However, I don't think this is the problem you're seeing right now...
    Actually, you're right, that is the problem: there's no HTTP header. The script needs this line:
    print 'Content-type: text/html
    before anything else is sent to the browser, and it will work. At least, it works with Apache 1.3 in Tiger, but I'd expect it to be the same with Apache 2.
    charlie

  • How to run the .jpx file?

    I have made the project using jbuilder in .jpx. how to run my project without jbuilder?

    I tried to running the demo file from JBuilder.
    I have followed the steps, but still error.
    I did the steps bellow:
    cd {my project\classes}
    C:\Program Files\JBuilder6\sampless\IPWorks\telnet\classes>C:\java\bin\java -cp . UnnamedPackage.dep2.TelnetDemo
    the error was:
    Exception in thread "main" java.lang.NoClassDefFoundError:UnnamedPackage\dep2\TelnetDemo
    and then I set CLASSPATH=C:\Program Files\JBuilder\sampless\IPWorks\telnet\classes
    the error is the same.
    when the command was C:\Program Files\JBuilder6\sampless\IPWorks\telnet\classes>C:\java\bin\java TelnetDemo
    the error was:
    Exception in thread "main" java.lang.NoClassDefFoundError: ipworks/IPWorksException
    in the classes dir, there is package cache dir and the inside of this dir there is a file UnnamedPackage.dep2
    So whats wrong with my command?

  • How to run a jar file in a browswer?

    Hi, everyone:
    I got a problem here. I would like to run my jar file in a html-based brower, should I write another applet for my jar file? How can I do that? (I don't have applet in my jar file, but only JFrame) Is there any way I can put a runnable jar file into an applet and show on the brower? Could anyone show me how to write this code? Thank you very much!!
    -jxchou

    At first you need a java plug-in for your browser.
    Next you have to implement an applet in your jar-file.
    The tag in your html-document should look like:
    <applet code="Sample.class" archive="sample.jar" width="400" height="400"></applet>

  • How to run windows dll files and driver loaded in remote system?

    Dear Friends,
    I need some valuable info regd how to run a remote windows dll files and the drivers of the system using java
    reply regd thanking you

    Please don't make duplicate posts like this.

Maybe you are looking for