How to Run a Display with the MacBook closed

Is there a way to run a display with the Macbook closed, without using a dock?

Click here and follow the instructions.
(33321)

Similar Messages

Using an external display with the macbook closed

I am using my big flat screen as an external display with my 2009 13" macbook. I want to be able to close the macbook. But when I do, the external display goes off. is there a way to configure my macbook so that the external monitor doesn't turn off.
Eyeore

Read through this....
http://support.apple.com/kb/HT3131

Using an external display with the macbook air

hi, i wanna know if i can use an external display with the macbook air as the tunderbolt is a bit pricey? i was thinking about buyin a LCD moniter wih a VGA port. many thanks

Yes. You can use VGA DVI or HDMI monitors by buying a Minidisplay port to xxx adapter and the the appropriate cable (vga, dvi or hdmi).
The MiniDisplayport adapter plugs into the Thunderbolt port.
Regards,
Captfred
Here's a sample HDMI adapter. All these available in the Apple online store.
http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?fnode=MTY1NDA3Ng

How to run hardware diagnostic with the help of terminal?

how to run hardware diagnostic with the help of terminal? any cmds

Macs newer than 10.7's release just need to boot with the 'D' key.
Otherwise you need to find the original installer disk of the Mac, or call AppleCare for it to be able to run the hardware diagnostic.

HT201343 Can you AirPlay to an Apple TV with the MacBook closed? I have a late 2011 MacBook Pro.

Can you AirPlay to an Apple TV with the MacBook closed? I have a late 2011 MacBook Pro.

If you are using airplay then that should be fine once the content is playing. You can't use home-sharing in this manner however.

Can i run 3 displays with 13" macbook pro retina?

I need to run 3 external displays from the macbook pro retina. Does the 13" retina have the capability or would I need to go with the 15" retina which has the Nvidia with 1Gb memory?

you will need the 15" model

How to make Internet commerce with the MacBook Pro in the program iWeb. I've made since and would like to make it possible to pick the next act with debit cards. Is there anyone who can help?

How do I make Internet commerce with the MacBook Pro in the program iWeb. I've made the website and would like to ad a site where it possible to commerce with debit cards. Is there anyone who can help?

Some info on this and the following two pages...
http://www.iwebformusicians.com/Internet-Music-Sell-Distribute/Website-Buy-Page. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Can I run two displays with my Macbook Pro?

I have the early 2011 Macbook Pro, with the 256mb ram on the graphics card, and what I think was the first generation "Thunderbolt" video output. I'm currently running a single 27"Cinema Display using a mini-display port adaptor out. I'm wondering if there's a way to drive two monitors with it - say a Thunderbolt display and the current Cinema Display? What configuration of displays, adaptors, and/or cables would I need to do this?
Thanks!

I suggest reviewing information here:
http://support.apple.com/kb/HT5219?viewlocale=en_US&locale=en_US
in the sections:
"Using the Apple Thunderbolt Display" and
"Using Mini DisplayPort displays or displays connecting with Mini DisplayPort adapters on Macs with Thunderbolt Ports:"

How to run Struts program with the help of tomcat

Hello Everybody
This is Adesh.I am a newcomer of java and facing a problem with struts, so if any one know how to set the path of struts and how to run struts program, so plz inform me.
THX in Advance.............................................

struts-config.xml
<struts-config>
<action-mappings>
     <action path = "/welcome"
                type = "Welcome"
                scope="session">
            <forward name="success" path=".welcome"/>
            <forward name="failure" path=".base.error"/>
     </action>
</action-mappings>
    <plug-in className="org.apache.struts.tiles.TilesPlugin">
        <set-property property="definitions-config" value="/WEB-INF/tiles-defs.xml"/>
        <set-property property="definitions-debug" value="1"/>
        <set-property property="definitions-parser-details" value="0"/>
        <set-property property="definitions-parser-validate" value="true"/>
    </plug-in>
</struts-config>tiles-defs.xml
<tiles-definitions>
     <definition name = ".base" path = "/include/template.jsp">
          <put name = "title" value = "${title}"/>
          <put name = "header" value = "/include/top.jsp"/>
          <put name = "body" value = "${body}"/>
          <put name = "footer" value = "/include/footer.jsp"/>
     </definition>
</tiles-definitions>web.xml
<servlet>
        <servlet-name>action</servlet-name>
        <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
        <init-param>
            <param-name>config</param-name>
            <param-value>/WEB-INF/struts-config.xml</param-value>
        </init-param>
<init-param>
            <param-name>definitions-config</param-name>
            <param-value>/WEB-INF/tiles-defs.xml</param-value>
        </init-param>
        <load-on-startup>1</load-on-startup>
    </servlet>
<servlet>
        <servlet-name>init</servlet-name>
        <servlet-class>Init</servlet-class>
        <load-on-startup>2</load-on-startup>
    </servlet>
    <servlet-mapping>
        <servlet-name>action</servlet-name>
        <url-pattern>*.do</url-pattern>
    </servlet-mapping>
<jsp-config>
    <taglib>
        <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
        <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/wall.tld</taglib-uri>
        <taglib-location>/WEB-INF/wall.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/c.tld</taglib-uri>
        <taglib-location>/WEB-INF/c.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/fn.tld</taglib-uri>
        <taglib-location>/WEB-INF/fn.tld</taglib-location>
    </taglib>
    <taglib>
        <taglib-uri>/WEB-INF/fmt.tld</taglib-uri>
        <taglib-location>/WEB-INF/fmt.tld</taglib-location>
    </taglib>
</jsp-config>
    <resource-ref>
        <description>DB Connection</description>
        <res-ref-name>jdbc/SQLServerDB</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
    </resource-ref>
</web-app>This should help....

How to run group solve with the batch manager

I'd like to know if it is possible (and how) to run group solve defined in OFA with the batch manager.
Thank you
Luigi Polverini
Synesis s.r.l.

OFA uses its Task Processor rather than Batch Manager to run tasks in batch. Group solves can be scheduled this way by submitting the group solve task to the TP, and then rescheduling it in the Task Queue window.
null

Using a keyboard and cinema display with the lid closed on the laptop...

I have connected my MacBook Pro to my Apple cinema display, but what do I need to do in order to be able to close the lid on the laptop, but still work with the computer. Also, do I need a docking station?
Thanks to anyone patient enough to reply with help!

I think the Trick is to connect your Laptop to the Cinema Display. Then connect a keyboard to your ACD, then set your Laptop to go to sleep by closing it - next wake the laptop by using the Keyboard attached to the ACD.

Running 2 displays with the 2012 Macbook Air

I purchased the Toshiba Dynadock U3 - which ran well with Win 7- hoping there would be drivers for the Mac OS. Anyone have any ideas how I can accomplish this configuration? If not, then what is the next best configuration where I do not have to keep connecting and disconnecting wires fron my MBA. Just want to connect one wire (e.g. - USB cable) that that's it. Is this wishful thinking?
Thanks,

I have the same question. I am coming from an HP PC and all I have to do is set my laptop in my laptop stand and connect 1 cable. I am them connected to ethernet, mulitple usbs, external monitor and power. There has to be somethink like this for my macbook pro. I have attached a photo of my laptop stand/docking station.
Please help!

Use the display with the laptop closed

Hey,
I have a MBP with a 24" display and was wondering how I can use the display as my main screen whilst the laptop is closed.

Click here and follow the instructions.
(49293)

How do I run a presentation while the macbook is closed?

How do I run a presentation on a projector with the macbook closed?

Your profile sys iPhone, but you can run in clamshell mode.
http://support.apple.com/kb/HT3131
https://discussions.apple.com/thread/2664995
http://support.apple.com/kb/HT1573
Hope this helps

Can I use Front Row with my Macbook closed?

I just got a mini-dvi to video cable for my macbook. I love using front row with it but I was wondering if there was a way that you could use front row with the laptop closed. Oh and I'm using tiger, so its not the new version of front row.

With your computer attached to a keyboard you should be able to wake it from sleep and run it properly with the lid closed.

How to Run a Display with the MacBook closed

Similar Messages

Maybe you are looking for