HOW TO RUN ABAP SERVER PROXY IN BACKGROUND?

Hi All,
I have a ABAP Server Proxy running in WAS 6.20. This Server Proxy runs as a foreground Process when the scenario is executed. if we run a scenario with huge load or run scenarios with continuous load, due to the fact that the server proxy runs as a foreground process, the system slows down and has some performance issues. How to handle this issue.Is there a way to run the Server Proxy as a background Job. Please do help me out.
Regards,
Sundararamaprasad.

hi,
here's an idea: encapsulate your proxy call inside an object which can be ran in background.... like an IDoc !
Steps:
create a zidoc in ECC and use it from PI to ECC to send data (instead of your direct abap proxy call).
Afer that, in z_function_module which is used to intregate your zidoc, call your abap proxy.
in WE20 (partner profile), the process mode of your idoc should be of course "Triggered by background program", and then use a job on program RBDAPP01 (with a variant limited to your zidoc) to process your idocs.
Note:
1. the only interest to do that compare to create a real IDoc interface is just (in my mind) to call a common proxy or to want to reuse an existing proxy without too more effort.
2. of course your current proxy call should be asynchronous.
I never tested it, so it's without warranty !
Regards.
Mickael

Similar Messages

How to run ABAP Function Module in Background Wchich Takes Long Time to Run

How to run ABAP Function Module in Background FOR LONG TIME
I am not that experienced with ABAP. I am on SAP BI 7.0. I WANT TO RUN A FUNCTION MODULE
RSDRT_INFOCUBE_DATA_COPY.
I used SE37 and then executed the module, I supplied the parameters on the form which opped-up and then program started running. . Program was however interrupted after 10 minutes by ABAP. How can I run it in background without interruption?
THANKS A LOT.

Hi,
You can call this FM in a program and run that program in background.
Regards,
Raju

HOW TO EXECUTE ABAP SERVER PROXY?

Hi,
I am working on a scenario in which message is passed from Integration Server to ABAP server proxy.
In case of client proxy we execute EXECUTE_SYNCHRONOUS methjod of proxy,but I am bit confused in case of server proxies.
How do we execute server proxy method?

Hi Similar to Client proxy, you will have the method EXECUTE_SYNCHRONOUS or EXECUTE_ASYNCHRONOUS for your server proxy. If your WebAS is based on 6.4 or above you can test the server proxy with a sample pay load very easily. In T-code sproxy, you will see a menu called proxy, Click on that and click test proxy, check the XML payload and you can enter the payload in the next screen and check your proxy..
Regards,
Jai Shankar.

Schedule Abap Server proxy in background job in SAP r/3

Hi all,
My scenario is File XI Proxy Interface inbound to SAP...
My requirement is to schedule the proxy in the background job every night.
How can I acheive this?
<removed_by_moderator>
Read the "Rules of Engagement"
Thank you,
Mili.
Edited by: Juan Reyes on Oct 21, 2008 3:04 PM

Hi ,
U don't need to schedule a server proxy ...as the proxy will kick in automatically as soon as the message is processed by file adapter .
Since yours is File to proxy scenario...
and you want to execute it overnight ..
You will have to control when the file is processed by XI file adapter.
Here what you can do ..
Let's just say your file gets placed in a Folder 'A' ...and your file communication channel is configured to pick files from folder B.
Write an abap code on xi box ..(or you can use a V.B. script)
which will move the file from folder A to Folder B.This code can easily be scheduled..so that it you can get files in folder B from where XI processig will kick in .
(job scheduling can be done sm36 ..use the wizard)

How to run ABAP Function Module in Background FOR LONG TIME?

I am not that experienced with ABAP. I am on SAP BI 7.0. I WANT TO RUN A FUNCTION MODULE
RSDRT_INFOCUBE_DATA_COPY.
I used SE37 and then executed the module, I supplied the parameters on the form which opped-up and then program started running. . Program was however interrupted after 10 minutes by ABAP. How can I run it in background without interruption?
THANKS A LOT.

Change parameter rdisp/max_wprun_time.
Default value for this is 600 seconds (10minutes).Change it to a time which you think you need for copying infocube data.
May be 5 hours.
PS:You can not run Function Module in background directly,but you can create a Z* program and call that FM from within that program and then run the program in background.
Hope this answers your query. Best of Luck!
Thanks and Regards
Anindya
Edited by: Anindya Bose on Jun 30, 2009 1:24 PM

How to debug XI--- R/3 (abap server proxy) code, SYSFAIL in SMQ2

Hi
i have a XI (BPM) to R/3 (ABAP server proxy) scenario,
when the data goes from XI to R/3, it is getting stuck at R/3 inbound queue (SMQ2), with status : SYSFAIL and error text: "No roll storage space of length
3391496 available for internal storage",
we tried activating the queue/ reexecute the LUW, but it still shows the same error status after running for some time,
how can i debug the ABAP server proxy,
pls tell me how can i debug the ABAP proxy code in the R/3
very critical issue

Have a look at SAP Note 17965 - No storage space available
Regards,
Prateek

Problem with Consuming ABAP Server Proxy WSDL in InfoPath

Tried to design a InfoPath (MS Office 2003) form from a WSDL file of a web service generated from an ABAP Server Proxy in a NW2004s SP10 system. InfoPath rejected this WSDL with error InfoPath cannot use the selected Web service method for receiving data because the method does not provide valid XML data. Tried other WSDL files from other web services from ABAP Proxy with InfoPath, all got rejected.
Validated the WSDL file with XMLSPY, no error. Tried to import the WSDL into XI 3.0, no error. Also tried the WSDL in .NET C#, also worked fine. It seemed only InfoPath does not like this WSDL from ABAP Proxy.
Created a similar web service in XI 3.0 and InfoPath had no problem with its WSDL. Then I compared the two WSDL files. There are differences. After try and error on changing the differences, I have nailed down to the XML tag that caused the problem. Please see the extracted WSDL line attached at the end. In the XI 3.0 generated WSDL the wsdl:message and the wsdl:part have the same name. In the ABAP Proxy generated WSDL the wsdl:part has the name Parameters which is different from the wsdl:message. After I copied the wsdl:message name to the wsdl:part name, InfoPath accepted the WSDL file without any problem.
I know the fix but I like to find out the root cause. Is this a known issue? Did we miss some configuration setting thats causing this issue? Any help will be much appreciated.
WSDL from NW2004s SP10 ABAP Proxy
<wsdl:message name="RegionR3GetList_Req_MT">
 <wsdl:part name="Parameters" element="tns:RegionR3GetList_Req_MT"/>
</wsdl:message>
<wsdl:message name="RegionR3GetList_Resp_MT">
 <wsdl:part name=" Parameters" element="tns:RegionR3GetList_Resp_MT"/>
</wsdl:message>
WSDL from XI 3.0 Interface
<wsdl:message name="RegionR3GetList_Req_MT">
 <wsdl:part name="RegionR3GetList_Req_MT" element="tns:RegionR3GetList_Req_MT"/>
</wsdl:message>
<wsdl:message name="RegionR3GetList_Resp_MT">
 <wsdl:part name="RegionR3GetList_Resp_MT" element="tns:RegionR3GetList_Resp_MT"/>
</wsdl:message>

Anne Tarnoruder has pointed out to me that her SDN article "Consuming SAP Enterprise Services in a Microsoft Office InfoPath Form" has described the the cause and workaround of this issue on page 9. I am extracting it below and mark this thread as answered. Thanks to Anne but not sure how I can award point to her.
Currently SAP supports only the Document style of WSDL, and not the Microsoft-specific RPC style, which causes a problem when consuming SAP services in the Microsoft environment. In this example, you need to apply a workaround that involves a minor correction of locally-stored WSDL files:
a. In the Project Explorer toolbar, click the Show all files icon and expand the Web reference folder.
b. For each Web reference in the project, perform the following steps:
c. Open the WSDL file, replace all instances of <wsdl:part name="parameters" with <wsdl:part name="parameter" (remove the s in parameters) and save the file.
d. Right-click the Reference.map file and choose Run Custom Tool to invoke a utility that generates code for XML Web services. This recreates the local proxy.

ABAP server proxy as web service provider ??

Hi friends,
I am wondering that if is possible to expose an ABAP server proxy as a web service on NetWeaver ABAP. I tried that, but failed to call it.
I generated a ABAP server proxy by using the PI inbound interface. I can call the ABAP server proxy by PI. From SOAMANAGER of the beckend system, i saw that this just generated ABAP server proxy is a service. Then i curious if this generated ABAP server proxy can be exposed as the web service like other RFC function modules on the same beckend system. So i generated a ABAP client proxy by using the binding WSDL of the ABAP server proxy. But the testing of the generated ABAP client proxy failed.
So my question is if it is possible to expose an ABAP server proxy as a web service on NetWeaver ABAP?
The beckend system is SAP ERP 6.0 EHP4. The PI is 7.11.
Thanks!

In other words, is it possible to consume a server proxy by client proxy? If yes, how to consume it?
Edited by: Chris Xu on Jan 16, 2011 8:59 PM

ABAP Server Proxy OR RFC - for attaching a file

Hello ABAP gurus,
Just to give a brief background, systems involved are ERP and PI
Certain Files (3 files to be exact) are generated in the ERP directory/file system
I need to transfer these files to PI "without" using the readily available FTP/NFS adapters (this is a limitation - no use of direct FTP is allowed)
Making the directory as a "shared" directory between ERP and PI is also not an option.
With the scenario above, I though of using an RFC or an ABAP Server Proxy to attach the said files to send them to PI
Which is the better way to do it?
I've seen a documentation for the ABAP Server Proxy that makes it possible to attach files to the proxy message, but for RFC I don't know if this is possible?
Your expert advise is highly appreciated

hI,
Use class CL_PROXY_CLIENT in the program and method IF_PROXY_CLIENT~EXECUTE.
You can refer documentation of this class as well as if you will search on any search portal using name of this class, you will get the briefe idea with the refernce procedure too.
Unfortunately I am unable to post you few links but try search on it, hopefully you will get it.
try below link.
<link to blocked site removed by moderator>
Edited by: Thomas Zloch on Oct 7, 2011 10:37 AM

ABAP Server Proxy development for creation of IDOC

Hi all,
I am working on JDBC to ABAP Server Proxy where i need to populate fields and then i need to mapp to the standard IDOC ie, SHIPMENT_CREATEFROMDATA01 which will create shipment idoc this is my requirement.Can anyone provide me the proxy development part for creation of IDOC.
Regards,
Bhoj

Hi,
Create server proxy at the receiver end and deploy it using the following links:
ABAP Server proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Debugging of Inbound ABAP proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
How to push data from BI to XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
How to push data into BW from XI using proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
http://help.sap.com/saphelp_nw04s/helpdata/en/2d/b9766df88f4a24967dae38cb672fe1/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/11/e2bc3d9ecc6b3be10000000a114084/frameset.htm
Server proxy part1 and part2:
/people/sap.user72/blog/2005/12/08/integration-builders-through-proxy-server-part--1
/people/sap.user72/blog/2005/12/13/integration-builders-through-proxy-server-part--2
Regards,
Vinod.

ABAP server proxy help required

Hello,
I want to make two simple ABAP server proxy scenarios
1. File to ABAP server proxy (async scenario)
2. File to ABAP server proxy (sync scenario)
Pls send me the blogs/docs for the above scenarios.
Regards

Henry,
Please go through the below links.
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
Also go through this, if you have problems in your proxy connection.
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards,
Sarvesh

File to ABAP Server Proxy Scenario

Hi 2 all,
I am running File to Server(ABAP) Proxy scenario...
I have checked the ABAP Server Proxy at application server only and it is working fine....But when i am running the whole scenario my server proxy is not getting executed..( i.e my file is being picked up but proxy is not getting called ..:(( )
Can i expect some valuable inputs regarding this issue..?
Regards,

to debug the problem....
first check SXMB_MONI of R3 system... where proxy has been created.
1 .check whether your proxy has been called ... it will be evident you get any message in moni for you interface or namespace..
2. check you proxy message has not got stucked in queue... sometimes message get stucked in queue and hence proxy are not called.. release the messaeg using smq2.
ELSE
1 .go to SXMB_MONI...of XI..
2. select 'Call Adapter' in right hand of monitor.
3. check the 'trace' under Call Adapter.
4. if you go at end of trace or somewhat near to end.. there should trace like...this ...
Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">Addressing mode: destination</Trace>
<Trace level="3" type="T">Destination = D67CLNT103_HTTP</Trace>
<Trace level="3" type="T">Attributes of destination: D67CLNT103_HTTP</Trace>
<Trace level="3" type="T">Type = H</Trace>
<Trace level="3" type="T">Pipeline = ENTRY</Trace>
<Trace level="3" type="T">Action = EXECUTE</Trace>
<Trace level="3" type="T">Host = XXXXXXX</Trace>
<Trace level="3" type="T">Port = XXXX7</Trace>
<Trace level="3" type="T">Client = 103</Trace>
<Trace level="3" type="T">User = XIAPPLUSER</Trace>
<Trace level="3" type="T">Language = E</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">SSL not active</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
check whether connection establishment between XI and R3 is successful or not...
if you are getting same message as above ,,that means ur RFC is working fine...
problem is on r3 side.. for this go to r3 and check moni...

Propagate fault message from ABAP server proxy to XI

Hello
My scenario is asynch HTTP -> async ABAP server proxy.
I have searched a forum but I didn't find the ansver on my question:
Is it possible to propagate a fault message from SAP system to XI in case of asyncronous ABAP Proxy in order to see in SXMB_MONI of XI?
I see errors only on SAP side but this solution doesn't satisfied me I want to see all errors in one place.

Hi,
Have u used commit work at the end of the code.
Can you please tell me what all configuration u have done.
U have referred the ABAP Proxy configuration:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Refer the below log for Client Proxy -
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Chirag

How to Run a Report automatically in Background for every night

Hi,
How to run a report program in Background automatically for every nigh.
Thanks
Ramesh

Hi Ramesh,
You can use SM36 and use the "Job Wizard" to define a background job in simple step by step procedure
Or
Goto SM37 and specify a job name.
Next specify the ABAP Program Name of the report you want to execute under Job Step.
Then click on "Extended Job Selection" and goto the Period Tab.
There select "Only Periodic Jobs" and then specify the frequency of execution based on Months, Weeks, Days, Hours or Minutes.
Hope this helps,
Regards,
Madhur
Message was edited by: Madhur Chopra

Internal table in ABAP Server Proxy

Hi Experts,
I have developed a JDBC to ABAP Proxy scenario.
I have a problem. In my ABAP server proxy I have to import the values into an internal table and pass them to a BAPI for GR creation.
I get an error like. OCCURS 0 is not allowed in OO concept.
Can anyone give me examples on declaring internal table in an ABAP Proxy(OO Concept).
Thanks
AK

Hi
Check this out.
http://help.sap.com/saphelp_nw70/helpdata/EN/fc/eb3660358411d1829f0000e829fbfe/frameset.htm
Cheers

HOW TO RUN ABAP SERVER PROXY IN BACKGROUND?

Similar Messages

Maybe you are looking for