How to run Acrobat OCR in batch mode?

I have many pdf files that I need to run OCR on. It is tedious to open each file and run OCR manually. I'm wondering if there is a way to automatically run OCR on all the files.

Use the Batch Sequence (Acrobat 8 or 9) or an Action (Acrobat X) available with Acrobat Pro.
Be well...

Similar Messages

To run a program in batch mode

I have to creaet a program to run in batch mode to update anln1 and anln2.
selection screen : company and cost center.
I have to read z table
update anln1 and anln2 ( from table anla )
Can anybody help me how to write a program in batch mode and update....

Hi,
Write the entries logic with the condidtion like below.
after selecting the required data,
if sy-batch = 'X'.
Now update the required table.
endif.
Even you can put the select statement also after if condition.
now go to SM36 and define the Job with Program name or any other name.
Under Job condition select the execution mode/time of your program.
As you have mentioned the sy-batch condition , your program will work only for Back ground mode.
Hope it helps you.
Kind Regards,
Ravi Sankar.Z

How to run my macbook in windows mode

how to run my macbook in windows mode, i have a software i need to install on my macbookpro but this software can not be run on the macbook pro software. i was told i can rum my apple in a windows mode?????

Yes, called BootCamp. Enjoy: http://www.apple.com/support/bootcamp/
Or you can run the Windows OS virtualized using VMWare Fusion ($49), Parallels Desktop ($99) or Oracle VirtualBox (free). This lets you run both OS at the same time: MacOS is the host and Windows the guest.

How to remove existing OCR in batch processing?

I don't see that there is a way to remove existing OCR in batch processing. Could you please let me know if it is available somewhere, or it is indeed not available?

Bill@VT wrote:
It can be removed, but not easily. If you used clearscan your only choice is to print to another file, but that does not fix anything that got messed up. You can not really back out of the Clearscan format. This is one of the reasons the warnings are given about the permanent changes you are about to do. If you used searchable OCR, then you should be able to delete the text layer and then use save as to only retain the scans.
I think that you may misread my question. I know how to remove OCR for a single pdf with searchalbe image OCR option (examine pdf then remove hidden text). But I want to do so in "batch processing" as I have many pdf files need to be processed.

Please help how to run System commands and batch files thru java program

Sir,
I want execute OS commands like dir,cls..etc and batch files,.exe filesthru java program.
I have tried it sofar thru Runtime.getRuntime().exec("execute.bat");
but it is not working.anybody knows about how to run the system commands thru java please give me the code.
thank you,
regards,
j.mouli

I've seen other posts with this questions, and answers. Unfortunately I didn't pay much attention. But the basic idea is to exec command.com and pass the specifc batch or command as an argument.

How to run labview program in debugging mode in windows 95 version

Respected all,
I am facing probelm while running probe.vi.
I received this command "connection to acquisition board was not found" when i run labview program.
I am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
Thanking You
Yours faithfully
M.Vijay

Respected Norbert,
Thank you very much to for your help.
Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
I am asking you to know, If i using Labview and Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
I also removed AT-AO-10 software from device manager >> Data Acquisition system >> AT-AO-10 just now.
I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
I am eagerly waiting for your help.
Thanking You
Yours faithfully
M.vijay

How to run a test in interactive mode?

If I want to run a test in interactive mode, how do I set it up?
For vcsi, there is a compile time option "-debug" and then in run
time, you could execute "./simv -gui". Do you have such flows available?

Hi
You can define 2 radio button one foreground and otherfor background then
for background use FM BP_JOB_CREATE or BKK_UPT_DISP_JOBS_START or DB2_SCHEDULE_JOB_IMMED
Regards
Shiva

How to run the forms under debug Mode?

Hi,
I run my form under debug mode by introducing a break point on a trigger. But i am receive the following error how to solve this issue.
JVM aborting and followed by the following one.
FRM-92101: There was a failure in the forms server during startup.
This could happend due to invalid configuration.
Please look into the Web-server log files for details.and additional information from Java console.
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
oracle.forms.net.ConnectionException: Forms session <5> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)I am running on my standalone machine.
Where and what file i want to look into this to solve this issue.
Good help will be appreciated. Thank in advance.
kanish

Kanish,
Lets start with a few of the basics, shall we. What JVM are you using (Jinit or Sun JRE and the version)? Based on the error you posted, I can infer that you are using Forms 10.1.2.0? Are you running a custom configuration in the formsweb.cfg and default.env? This could be the cause if you have modified the CLASSPATH setting in the default.env excluding core .jar files.
Typically, the FRM-92101 error is caused by a Java error; either a .jar is not found or invalid or not compatible with JVM, etc.
Have you tried clearing your Java Cache to check for a corrupt .jar?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to run Lot Cost in Final Mode

Dear Gurus,
How to run Lot Cost Process in Final Mode? in OPM Lot Cost.
I am able to run Final = No, successfully and then I do Lot Cost Process for Final = Yes.
Then I donot find the Item/Lot costed, its not there in Lot Cost Details.
Is there some thing I am missing?
Please help me its Urgent
Thanks very much
Raghu

Yes, called BootCamp. Enjoy: http://www.apple.com/support/bootcamp/
Or you can run the Windows OS virtualized using VMWare Fusion ($49), Parallels Desktop ($99) or Oracle VirtualBox (free). This lets you run both OS at the same time: MacOS is the host and Windows the guest.

HOw to run the Applet in dos mode

how to run the applet in Command Prompt(DOS).
I have save this in directory D/vijay/javap/A.java and my JDK is in C drive.
Plz send me reply as soon as possible.
My code is :-
import java.applet.*;
import java.awt.*;
public class A extends Applet
private int w, h;
public void init( )
     w = 45;
     h = 50;
public void paint(Graphics g)
     g.drawRect(w, h, 20, 80);
}

import java.applet.*;
import java.awt.*;
public class A extends Applet
private int w, h;
public void init( )
w = 45;
h = 50;
public void paint(Graphics g)
g.drawRect(w, h, 20, 80);
<applet class="A" height="200" width="200" code="A.class">
</applet>
*/And in command prompt
javac A.java
appletviewer A.java
Message was edited by:
passion_for_java

How to Handle Dynamic actions in batch mode???

Hello Experts,
We have a requirement where we need to automate PA40. The data would be sent in csv file and we need to perform the required steps to insert data into Infotypes.
The issue is in batch mode (background mode), the dynamic actions wouldn't be called and the business wants the dynamic actions to be considered as well.
Pls let me know if there is any way we can interpret the dynamic actions dynamically; meaning the prog should be able to handle the newly created dynamic actions as well.
Any pointers to this are highly appreciated.
Regards
RK

Hi.
As far as i know, the limitation comes from the BDC execution itself, it doesn't really matter whether the execution is online or in batch mode.
* dynamische Massnahme
    IF sy-binpt EQ space.
*      befinden wir uns im ALE-Eingang ?
      CLEAR: ale_flag.                                   "XFYAHRK063273
      call function 'RHAP_ALE_FLG_GET'                   "XFYAHRK063273
        importing                                        "XFYAHRK063273
          ale_flg = ale_flag.                            "XFYAHRK063273
      IF ale_flag IS INITIAL.                            "XFYAHRK063273
        IF pspar-vinft NE space. "infotype view         "XYLPH9K007065
          PERFORM dyn_measure IN PROGRAM (view_repid).   "XYLPH9K007065
        ELSE.                                            "XYLPH9K007065
          PERFORM dyn_measure.
        ENDIF.                                           "XYLPH9K007065
        PERFORM process_m
One thing you could try to do to avoid this and get the dynamic measures executed is to use the NOBINPT variable of the OPTIONS structure in CALL TRANSACTION
DATA opt TYPE ctu_params.
opt-dismode = 'A'.
opt-nobinpt = 'X'.
CALL TRANSACTION 'PA30' USING bdcdata OPTIONS FROM opt.
PERFORM close_group.

How to run EJBs Session in standalone mode

Hello,
I m trying to run in a testcase some EJB such as Session stateless, Session stateful of entities. For this last one, everythin works fine. Unfortunately, I cant figure out how to run and retrieve by JNDI my session beans.
I itried to run my beans in the JBOSS embedded EJB runtime, and it works fine.
It would be nice I anyone could give me some explanations or a link about this subject :-)
Thanks
Regards,
Alexandre

Yes, called BootCamp. Enjoy: http://www.apple.com/support/bootcamp/
Or you can run the Windows OS virtualized using VMWare Fusion ($49), Parallels Desktop ($99) or Oracle VirtualBox (free). This lets you run both OS at the same time: MacOS is the host and Windows the guest.

How to run a file in trusted mode?

Okay, so I have a .swf that I run on my PC, that communicates with other linux boxes, etc... across my network based on IP address. It works great, once the folder that swf resides in is trusted in the Global Settings Manager.
Now, here's the problem. I want to run that same file on my Motorola XOOM and my Motorola Droid X, but it won't connect to my other devices, and I think it's because it is running in protected mode. Can anyone tell me how to "trust" an app on Flash Player mobile like you can on a desktop?
I tried creating the FlashPlayerTrust directory and depositing a .cfg file I made with the directory path in it, but that didn't work.
I'll spiff anyone who can help me figure this out, I have a serious desire to make this happen.
Thanks in advance.
Dan

Nobody? I'm begging....please....I really need to figure out how to make this happen.
Even if you guess, I'm willing to try just about anything.
Thanks in advance.

How to run a BAPI in background mode?

Dear friends,
I have a requirement [In the UI user can choose two options - run online or run backgroud] to run a BAPI (BAPI_SALESORDER_CHANGE) in background mode (background job) , does anybody know how to implement it?
Thanks a lot!!

Hi
You can define 2 radio button one foreground and otherfor background then
for background use FM BP_JOB_CREATE or BKK_UPT_DISP_JOBS_START or DB2_SCHEDULE_JOB_IMMED
Regards
Shiva

How to run trigger/procedure into debug mode

Hi,
I have created trigger. i would like to run this into debug mode. Please suggest that how to do through sqldeveloper or sql command prompt.
Regards,
Venkat

- install PL/SQL developer (trial available at www.allroundautomations.com)
- connect to your DB
- in the tree on your left right click your trigger and select "Add debug information"
- open a new test window (file - new - test window)
- -- Created on 20-2-2012 by RMARTENS
declare
-- Local variables here
i integer;
begin
-- Test statements here
insert into table (col1, col2) values ('cal1', 'val2');
end;- now click the "Start debugger" button and you'll be able to step into all the steps.
- the idea is that you do a "step into" on your insert statement (which offcourse you need to alter according to your table)
good luck!
Regards,
Richard
blog: http://blog.warp11.nl
twitter: @rhjmartens
If this question is answered, please mark the thread as closed and assign points where earned..
Edited by: rima on 20-feb-2012 11:37

How to run Acrobat OCR in batch mode?

Similar Messages

Maybe you are looking for