How to run Amp Farm in Logic Express 8?

I'm new to all this so any help would be greatly appreciated! . . . . . .
Im running Logic Express 8 without any problems, I've just installed Line 6 Amp Farm and that runs without a problem. The problem I am having is-
I want to run Logic and use the sounds/amps from Amp Farm but cant figure out how to do it? I've searched the net and cant find anything about how to do it, I've also had a good look through the Logic user guide but had no luck. . . . . . .
HELP PLEASE!
John.

Heres where I'm at so far-
I've been into Logic and opened Preferences/Audio Units Manager and then validated Pod Farm.
I go into Browser and Library on the far right to find tones on the far right of the Logic interface, I can find all the Garageband tones/sounds and all the Logic tones/Sounds but there's nothing related to line 6 Farm. The only way I can get into the line 6 stuff is to use the browser and go - Documents/Line 6/Tones/Pod Farm/Guitar/then into the folders where the tones are but the folders seem empty.
I know the folders aren't empty because if I go into them normally, not using Logic, all the tones are there in the relevant folders and when they are clicked on it opens Pod farm.

Similar Messages

  • How to connect my Alesis to Logic Express Pro, running on an Intel Mac Mini

    Hi,
    would anyone possibly have an idea how to connect my Alesis Multimix 8 USB to Logic Express 7,2?
    The Alesis has a USB out. But I don't see anything in the L/E documentation on USB connections.
    I'm hopeful there's another way.
    Thanks very much.
    -peter

    LE documentation won't give instructions for use of 3rd party equipment, except possibly generically.
    Have you downloaded the latest drivers? If it is a USB item, perhaps you are meant to plug in the USB cable rather than wishing it was something else.

  • How many computers can I install Logic Express?

    I'm wondering on how many of my current Macs I can install one license of Logic Express on.

    See
    http://discussions.apple.com/thread.jspa?messageID=6984011&#6984011

  • How many computers can I install logic express 9?

    How many computers can I install Logic 9 on?

    See: http://images.apple.com/legal/sla/docs/logicexpress.pdf
    2 computers - one desktop and one laptop and not running at the same time.

  • $5 Starbucks card to first successful answer: how to import midi timecode into Logic Express 9 from Roland VS-880 or Ensoniq ASR-10

    I will literally mail a $5 Starbucks card or gift $5 via paypal to the first person whose response gets me success.  Then after all responses are provided and I'm successful with my issue, I'll also raffle off $5 to one of ALL respondents by random pick. 
    Problem/question:
    I can't figure out how to import midi timecode data from either an Ensoniq ASR-10 or Roland VS-880 Vxpanded into Logic Express 9, so I can then use Logic Express 9 as the master.  No manuals seem to explain that; I just can't find it.
    Background/basics:
    1.  My ultimate goal will be to move all midi data from the Ensoniq ASR-10 floppies and all digital audio files from the VS-880 into Logic Express 9.  Once the midi timing is imported into a Logic Express 9 file, I'll import the data from the Ensoniq & Roland via steps 2a & 2b below.
    1a.  Ten years ago I somehow (am in the process of re-learning what I did 10 years ago) imported the midi timing into the Roland VS-880 Vxpanded from the ASR-10, and then used the VS-880 as the Master to control the ASR-10.   So my current status is that I use the Roland VS-880 as the master, and the Ensoniq ASR-10 as the slave.
    2.  FYI for anyone who might be in the same boat, wanting to transfer stuff from an Ensoniq ASR-10 and Roland VS-880 to the computer:
    2a.  I will import all midi sequence data from my ASR-10 floppy disks via a utility purchased here, which will all a PC to read Ensoniq-formatted disks, and then just hopefully cut/paste midi files into Logic Express 9 (FYI only):  www.chickensys.com
    2b.  Then will import all the individual WAV files from my Roland VS-880 to Logic Express 9 using a method learned here (FYI only): http://www.vsplanet.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=985974&PHP SESSID=b1d2f57be4a1d37d49787400213b22df
    2c.  I'll then combine them all into Logic Express 9.
    So - how the heck do I capture/import the midi timecode into Logic from either the roland or ensoniq using midi?
    I'm don't think that cutting/pasting the midi data into a Logic Express 9 sequence file (step 2a above) will do that, because there are all kinds of tempo & time signature changes in the midi files unfortunately.
    THANK YOU and Merry Christmas!!
    Andy

    OK doesn't look possible.  Closing discussion. 

  • How do you arrange instruments in logic express?

    Hi,
    I am new to Logic Express 9. I have created an 8 bar song and I want to make it longer and arrange my track so I can remove and add sounds as the song goes along. For example Remove a piano at bar 4 and have a guitar playing at bar 8. How can I do this?
    Thanks

    Did you assign the delay on the vocal track's "Insert" button? If so, this could be the reason your vocals sound jumbled. You can always lower the "wet" signal in the delay itself, but I find that the following method works best when using reverb and/or delay:
    1. From the Arrange window, select/click the vocal track you want to use delay on.
    2. Looking at your track on the left hand side of the screen, right below "Sends," hold-click on the button and select Bus>Bus 1(or whichever one you want)
    3. An "Aux" track will appear right next to your vocal track.
    4. Load either delay or reverb on the inserts and choose the appropriate setting. I prefer using either Stereo or Tape delay since they have better options to work with.
    5. On your vocal track, on your "Sends," you can turn up the volume right next to it, which controls how much of your vocal track you want to send to the aux to get that reverb/delay. Start with -10 db and work your way from there. You should notice a difference by then. You can also control the fader from the Aux as well.
    As far as fadeouts are concerned, I haven't really figured that out. I normally fade out when I use a separate mastering suite, but you can also fade out manually using the Automation method on the Master fader.
    Hope that helps.

  • How many computers can I install Logic Express on?

    Simple question...can I buy one copy of Logic Express and install it on both my Macbook Pro and my new iMac when I get it? I can't see anywhere on Apple's site any info on the software product licences. I also need to know the same information for Final Cut express.

    Christian,
    Thanks for that, I was beginning to think I wouldn't get an answer to this question. I will be using only one of these computers for music production at a time so that will be fine. I will probably use the iMac at home and the Macbook Pro when away and I didn't want to have to buy two copies.

  • How to record V-Drums in Logic Express?

    I’m trying to record my V-Drums through the M-Audio 2626 interface into Logic Express. I’m able to trigger sounds in the Logic Express library when I conned the MIDI-out on the V-drums to the M-Audio.
    But I’d like to record the Roland drum sounds through Logic. Has anyone had success with this?
    I tried connecting the audio out from the V-drums into channel 1 on the M-Audio with a 1/4-inch instrument cable. I can hear the drum kit through the M-Audio via the headphone jack, but not through Logic Express.
    If anyone has successfully recorded Roland V-drums in Logic, any information would be helpful.
    Many thanks,
    

John
    iMac 2.8 GHz Intel Core i5
    RAM: 4GB 1333 MHz DDR3
    Mac OS X 10.6.6
    M-Audio ProFire 2626
    Software Version 0x100C1
    Roland TD-4 V-Drums
    Logic Express 9.1.3

    Hi,
    you're on the right way. You have to create an audio track in Logic (one for each output of the drums or simply a stereo track for the drum's stereo output - depending on your configuration).
    1. Select the appropriate channel of your M-Audio as the audio track's input
    2. Click the little red "R" to arm this track for recording or press the littel "I" to activate input monitoring for rehearsal.
    3. Start recording and there you are.
    4. Don't forget: Have fun!
    Fox

  • How many Macs can you install Logic Express on?

    I upgraded to LE 7.1 from the Logic Audio 5/6 Big Box. I needed the XSKey to authorize the LE 7.1 upgrade -- I'm wondering, how many installations of LE 7.1 does it allow? Just for utility's sake it would be useful to install it on a desktop and a laptop, for instance.
    As the XSKey still has authorizations for those previous Big Box versions, I presume I could still install Logic 5 and 6 on as many machines as I wanted, I'd just have to always have the XSKey plugged into the particular one I wanted to use at that time...right?

    The agreement can be found here
    http://images.apple.com/legal/sla/docs/logicexpress.pdf
    Section 2 first para
    Simply you can install it on one laptop and one desktop (See the para for specifics) at the same time, but you can only use on one of these at a time.
    You cannot therefore have the same license on two laptops, you need two copies.
    How does it check? No idea. I don't have two apple computers.
    P

  • How do I Slave REASON to LOGIC EXPRESS?

    I understand the whole REWIRE thing. Now how do I sync Logic clock to REASON?
    Powerbook G4   Mac OS X (10.4.3)  

    This little video tutorial will tell you all you need to know. I ReWired Reason for the first time to L.E. using this last week, works a treat.
    http://www.youtube.com/watch?v=IxVzDwQipzw&search=logic%20reason%20rewire

  • How many computers can you install Logic Express 8 on?

    Do they offer a family pack or do you have to buy one for each computer?

    The agreement can be found here
    http://images.apple.com/legal/sla/docs/logicexpress.pdf
    Section 2 first para
    Simply you can install it on one laptop and one desktop (See the para for specifics) at the same time, but you can only use on one of these at a time.
    You cannot therefore have the same license on two laptops, you need two copies.
    How does it check? No idea. I don't have two apple computers.
    P

  • How to write a if else logic expression for this condition

    Hai All
    I have written some if else logic for for my condition
    If the time is betweeb 0145 and 0630 and timeout is a column in a table is null than update sysdate-1
    then if time is bet0645 and 0900 then timein is null then insert into timein in table called dail_att
    and time bet 1130 and 1300 then if barcode null then insert timein else update timeout
    and bet 1645 and1730 then if barcode null and timein null then insert timein or update time out
    this is my condition for generating attendance. Ive tried some logic and pls tell case executed faster than ifelse logic
    and give me a soluton
    This is my coding
    if :bartime between 0145 and 0630 and :barcode is not null then
    update dail_att
    set timeout = :bartime
    where barcode= :barcode
    and timein is not null
    and ATTEND_DATE = :BARDATE-1;
    else if :bartime between 0645 and 0900 and :barcode is null then
    insert into dail_att(barcode,timein,attend_date)
    values(:barcode,:bartime,:bardate);
    else if     :bartime between 1145 and 1300 and :barcode is null then
         insert into dail_att(barcode,timein,attend_date)
    values(:barcode,:bartime,:bardate);
    else
         update dail_att
    set timeout = :bartime
    where barcode= :barcode
    and ATTEND_DATE = :BARDATE ;
    end if;
    else if :bartime between 1645 and 1730 and :barcode is null then
              insert into dail_att(barcode,timein,attend_date)
    values(:barcode,:bartime,:bardate);
    else
         update dail_att
    set timeout = :bartime
    where barcode= :barcode
    and ATTEND_DATE = :BARDATE ;
    end if;
    else :bartime > 1730 and :barcode is null then
         update dail_att
    set timeout = :bartime
    where barcode= :barcode
    and ATTEND_DATE = :BARDATE ;
    end if ;
    EXIT WHEN :SYSTEM.LAST_RECORD = 'TRUE' OR :BARCODE IS NULL;
    NEXT_RECORD;
    forms_ddl('commit');
    end loop;
    Regards
    Srikkanth.M

    Hai Sir
    I am storing time in 24hrs format and its datatype is varchar.Pls tell me we can write an if else with in a elseif
    Regards
    Srikkanth.M

  • How do I install Logic Express without CD

    Just got a new mac and it has no CD drive. So how do I go about installing Logic Express that I own? I only see updates listed in the downloads sections of apple pages.

    Thank you, this is a good suggestion. But for some reason I coulnd't get it to work. I followed the steps as described but the drive never showed up under "devices" on the computer without the drive.
    Anyway, I created a disc image of the installation disc and all ended well.
    Thx.

  • How can i use plugins from main stage like space designer in logic express 9.1.6

    I'm using logic express 9.1.6. today I bought Mainstage 2 in the appstore. there are a lot of powerfull plugins. some of them, like e.g. space designer, are not included in logic express.
    how can I use the in logic express? they are not listed automatically with all the others...
    thanx

    Hi
    No can do.... these plugs etc are part of the code for Logic Pro and MainStage (and not for Express)
    CCT

  • How to install Logic Express 9 without disc

    Hi,
    I am awaiting arrival of my Retina MacBook Pro, I have logic express 9.1.0 on disc, I was just wondering how I am able to install logic express (as it is not in Mac App Store) and use my serial??
    Regards,
    David

    If you have another computer with an internal drive you can enable "DVD or CD Sharing" to install to your RMP:
    http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US
    You could also use an external drive, e.g. Apple's Superdrive:
    http://store.apple.com/us/product/MD564ZM/A?fnode=5f

Maybe you are looking for