How to run and use LCRE

Dear all,
I downloaded and installed the trial LiveCycle ES3 Server of Jboss from below link.
http://www.adobe.com/content/dotcom/en/devnet/livecycle/downloads.html
After installation, I don't know how to make the configuration or how to run LCRE, which is the executive one?
I just want to use LCRE to extend the PDF form. Thanks.

What is your usecase ? Do you want to Reader Extend PDF files so that users can fill forms using Adobe Reader ?
Is the number of users who would receive Reader Extended documents more than 500?
And do you reader extend large volume of documents?
If the answer is yes to any of the above questions then LC RE is the right product to use
Steps to import Reader Extension Credential : http://help.adobe.com/en_US/livecycle/10.0/AdminHelp/WS92d06802c76abadb-5145d5d12905ce07e7 -7f22.html and then follow the instructions that Sharad mentioned in another post
--Santosh

Similar Messages

  • How to create and use dynamic queue in JMS

    Plz tell me how to create and use a dynamic queue in jms and can reciever file lookup it as it lookup any server configurred queue(written in the server).

    Hi,
    We can use Azure File services to do this, for more information, please have a look at this article:
    http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx. The Azure File service exposes file shares using the standard SMB 2.1 protocol. Applications running in Azure can now easily share files between
    VMs using standard and familiar file system APIs like ReadFile and WriteFile.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Hello guys..does anybody know how to install and use adobe master collection with the new lion?   I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...   I am a new mac users and I'd like t

    Hello guys..does anybody know how to install and use adobe master collection with the new lion?
    I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
    I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

    Lab79 wrote:
    Are you on Apple's payroll?
    well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
    good luck with apple dude..
    Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
    And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
    <The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
    Great suggestion. You should go with that one, but good luck getting a refund.
    Bye

  • Formication : How to install and use it

    Hi,
    I need some help. I would like to install and use the Formication CGI but I don't find any documentation usable for someone who never installed any CGI
    Does someone use it and can teach me how to install and use it ? Or maybe there is a documentation somewhere ?
    Thanks for any help

    >I thought it was something well known here.
    I'd never heard of it before.
    Find here the message from the Mac OS X Server Mailing list where I found it.
    Hi all..
    We are currently moving: from WebStar / Lasso 6.x / FMS 5.5 to
    Mac OSX Server / Apache / Lasso.850 / FMSA 8.
    On our WebStar webserver we used FlexMail to handle e-mails sent from a
    html-form, unless we wanted databases/Lasso to get involved.
    I understand FlexMail cannot be used on Apache so I have been looking around
    and searched the list for any tool to do the same job.
    --> What tool to send e-mails directly from web-forms
    with a reasonable option to format the e-mail and
    generate a response page.
    Henning, most of the people that transition from WebSTAR to iTools Apache use Formication.
    Formication is a Perl version of Flexmail, so it has all the features of Flexmail, plus more. It was designed by one of the developers of the original Flexmail.
    When you convert from WebSTAR to Apache you can keep your script intact.
    With iTools, all you need to do is to add the action:
    Flexmail /cgi-bin/formication.pl
    and the .flx handler,
    and the scripts run unchanged.
    >I also found that there is an invisible file
    inside. It's a .htaccess file
    I'd totally missed that, and it's likely to be the
    critical link.
    yes... I supposed it was something important but.... well hidden...
    By default, as shipped by Apple, .htaccess files are
    ignored. You need to explicity enable then in
    /etc/httpd/httpd.conf
    Both 'Action' and 'AddHandler' (the two directives in
    the .htaccess file) require FileInfo override for the
    directory. Therefore, at the very least you need to
    add:
    <pre class=command><Directory /path/to/your/form>
    AllowOverride FileInfo
    Directory></pre>
    to your httpd.conf so that apache will read the
    .htacess file.
    Alternatively, since you have to edit httpd.conf
    anyway, you might just want to add those directives
    to the <Directory> block, which will save Apache
    having to read the file each time the form is used.
    Thanks a lot Camelot,

  • How to install and use icloud in imac windows 7 based

    How to install and use icloud in imac windows 7 based

    Have you carefully read iCloud - Learn how to set up iCloud & iCloud on a Mac?, What do I need? If you are trying to run on Windows 7 on your iMac and ignoring OS X well you're pretty much on your own. You would need to look for supports on Windows forums. If you happen to use BootCamp there is a Bootcamp forum that you can post on for BootCamp and Windows assistance.

  • How to run VI using bolean control?

    How to run VI using bolean control? Do I need to use invoke node or something else?
    Thank you in advance.

    You cannot start running a vi using a boolean on the front panel of that same VI. Detecting the state of the control requires the VI to be running.
    Maybe you can clarify WHY you need to do this. The run button is for VI development. Once you have a final application, it should be set to "run when opened". The actual code could start out in a wait loop (or wait event) such that pressing a certain button will trigger execution of the main code as needed.
    LabVIEW Champion . Do more with less code and in less time .

  • How to Set and Use a global variable within a session?

    Dear All,
    I'm new to jsp, and would like to ask how to set and use a global variable within a session?
    Thanks in advance.
    Regards,
    Cecil

    With session.setAttribute("name",object) you can store a Attribute in the session object.
    with session.getAttribute("name") you can get it.
    That's it.
    Regards,
    Geri

  • How to install and use a plug-in downloaded from the apple site?

    how to install and use a plug-in downloaded from the apple site?

    Emelie,
    which plug-in do you want to install?
    some of the plug-ins come with an installer on the disk image, you click the installer and it will install it in its proper location.
    For others you move the plug-in into to System Library or your User Library:
      Your Hard disk  > Library > Application Support >Aperture > Plug-Ins > Edit
    or
    Your Home Folder > Library > Application Support >Aperture > Plug-Ins > Edit
    If it is an "Edit" plug-in, it goes into the "Edit" subfolder, "Export" plug-ins into the "Export" subfolder.
    You can tell by the extension, what kind of plug-in it is.
    E.G. BorderFX.ApertureExport is an export plug-in, BorderFXEditPlugin.ApertureEdit an edit plug-in.
    Regards
    Léonie
    P.S. In OS Lion the Libraries are hidden by default: To reveal your User Library activate the Finder and select from the main Finder menu:
        Finder >  Go , then hold down the ⌥-option-key, untill the Library appears in the drop.down menu.
    To show the System Library:
         Finder >  Go > Go to Folder
    then enter   / Library

  • How to create and use mutable array of UInt8

    Hello!
    If I get it right, UInt8 *buffer, buffer - is a pointer to a start of array?
    Then how to create and use mutable array of UInt8 pointers?
    The main target is a creation of the module that will store some byte array requests and will send all of them at the propriate moment.

    I try
    - (void) scheduleRequest:(UInt8 *)request {
    if (!scheduledRequests) scheduledRequests = [[NSMutableArray array] retain];
    [scheduledRequests addObject:request];
    But get warning:"passing argument 1 of 'addObject:' from incompatible pointer type"

  • HOW TO CREATE  and  USE EVENTS IN WORKFLOWS .

    HOW TO CREATE  and  USE EVENTS IN WORKFLOWS with the help of classes.
    What i am doing is..
    open se24
    event tab->event name->parameters
    method tab->method name->event handler->copy parameters
    interface tab->if_workflow->enter
    tell me what else to do step by step
    Another important thing is that HOW to use these class events to trigger the workflows.
    REPLY ASAP
    THXS IN ADVANCE

    Hi,
    Pl. see this blog...
    Raising ABAP OO events for workflow
    Regards,
    JOy.

  • How to Create  and use of Coherence servers in weblogic serevr 11g (10.3.6)?

    how to Create  and use of Coherence servers in weblogic serevr 11g (10.3.6)?

    See the below discussion
    How to create and use Webservice controls using WSDL in weblogic portal10.3
    Thanks,
    Venkat Sarvabatla

  • Could you let me know how to enable and use ITS on SAP ECC5  and ECC6

    Could you let me know how to enable and use ITS on SAP ECC5  and ECC6

    Hello Tina,
    please see here
    in tree select "Installation and Activation"
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/b8/2a8d65be7eee4eb66067f8a33d1c8b/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/b8/2a8d65be7eee4eb66067f8a33d1c8b/frameset.htm</a>
    best regards

  • Need help how to install and use html db

    plz any body can help me i have download htmldb2.0 and want to install and use it with oracle but i do not know how to install and use it first time any body can help me in detail .
    Niazi

    Niazi,
    Included in the 2.0 download are some very comprehensive Installation and Upgrade instructions, I would highly recommend you read those.

  • How to setup and use Passbook on iPhone 4?

    How to setup and use Passbook on iPhone 4?

    So your saying you can only copy part of this text?

  • How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?

    How to install and use the Khmer unicode Khmer MEF1 and Khmer MEF2?
    from www.mef.gov.kh in the bottom of the page, you can get the unicode for the ms office

    I think that stuff is for windows, a waste of time trying to use it on a Mac.
    There is no need to download anything for Khmer on a Mac.  Apple provides Khmer fonts and keuyboards with OS X.
    OS X Mountain Lion: Type in another language
    MS Word for Mac does not support Khmer.  Use TextEdit, Pages, Nisus Writer, LibreOffice instead

Maybe you are looking for