How to run assembly file downloaded to  install HSF

Hi All,
I am not very familiar to installations. I want to install HSF client on my computer as I think HSF server would be very difficult. When I downloaded the installable from the edelivery site, it gave me a file which has extension assembly.dat. How do i execute this file.
Any reply is appreciated and thank you for your time in advance.
Cheers,
XXX

Hi There,
Seems you're new to installing Hyperion V11 products.
First, you need to download all the .zip files for- (i) All parts of Foundation Services, (ii) HSF, (iii) Other components, as per the requirement
Secondly, create a folder, say, EPM_Unzipped on one of your drives, having at least 4-5 GB free space. Now, copy all the .zip files you downloaded into this EPM_Unzipped folder. Without navigating to any other directory, extract all the .zip files(you downloaded) in this same EPM_Unzipped folder. Once you've done this, locate & double-click- the batch file, InstallTool. If it doesn't throw any errors & shows you the interface to proceed with the installation, rest is a cake-walk. (Else- I advise to pls. download & read the epm_install.pdf guide from http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install.pdf. Specifically, "Component Installation By Tier and Installation Assemblies" section which tells you which assemblies are to be present before proceeding with the installation).
Thirdly, after due creation of repositories, proceed to configure the installed components one-by-one, preferably not all in go!
Let me know incase you've any questions! Good luck!
- Natesh

Similar Messages

  • I've tried to install flash player several different times ans each time i get a connection error message.It downloads fine and when i run the file to start install,it installs up to 5% and then i get the connection error message.Can someone please help m

    I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.

    Hi!
    I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
    It allows you to download it offline, which is what I used.
    Hope I was help!
    -Haroon

  • How are the .7z files used and installed for photoshop elements and premier elements?

    How are the .7z files used and installed for photoshop elements and premier elements?

    Hi,
    You can try to extract them to a folder and then try to install using the setup file.
    Or you can try to download the .exe file ( Small File ) for the software you have and then run the .exe file and it will start the installation. Both .exe and .7z file for the application should be in same location.
    Download Photoshop Elements products | 9, 8, 7
    Download Photoshop Elements products | 11, 10
    Download Premiere Elements products | 11, 10
    Download Premiere Elements products | 9
    *** You can either download the .exe file from the above download links or you can also download both .exe (File 2 of 2) and .7z (File 1 of 2) from the above links.

  • How to run .exe files with Virtual PC for Mac

    Hey Guys, I'm new around here and with mac technology as well. Anyway, I have an iMac OS X 10.5.1 Leopard and I've recently purchased the Virtual PC for Mac 7.0.2 software. So I'd like to know how to use this program properly, because I need to run some executable files in my computer. It is confusing for me because I don't know how to get started, and I only get to the part when it says "OS not found, Install an OS on this hard drive".
    Honestly I've no idea of what an OS is or where do I get that. So I'd really appreciate if one of you guys could tell me, step by step, what to do to use Virtual PC properly, and finally learn how to run .exe files on mac.
    Thanks in advance!
    Have a nice day!

    Always nice to see new faces
    Honestly I've no idea of what an OS is or where do I get that.
    This brings up the second part of your problem. The first part is setting up either a proper Virtual Machine program like Parallels or VMfusion, or setting up a Boot Camp partition on your drive.
    http://www.parallels.com/
    http://www.vmware.com/products/fusion/
    OS stands for Operating System. You are running Leopard 10.5.7 as an operating system on your Mac (MacOS X).
    The second part of your problem - You will need a copy of Windows XP or Vista if you want to run Windows on your Mac.
    There is at least one other solution for running Windows programs on a Mac. It's called "CrossOver" by a company named 'Codeweavers'. It's based on a project for "Wine" to be able to run PC programs on a Mac or Linux, without having to buy or install Windows. It works with a narrow subset of Windows programs so you would want to make sure the program you want to run is compatible with CrossOver before you buy it.
    http://www.codeweavers.com/products/cxmac/
    In addition to all the above information, you need to upgrade your Mac to the latest 10.5.7 from 10.5.1. "Software Update" is located under the black Apple icon in the Menu Bar at the top left corner of your monitor. After you are updated you will want to update your Profile here so that it shows the proper OS version.
    With your level of experience with MacOS X and the Windows OS's you should probably get some help from a local Apple store. They have an appointment system and do offer many types of help and training, and they can offer assistance with choosing the proper programs for you to purchase for your machine.
    You are also welcome to continue to ask questions here, of course. You will want to ask your questions with different issues that come up in different threads so that the answers stay focused on the title of the thread.
    Message was edited by: dechamp to try to be more accurate with a fairly complicated issue...

  • How to run .java file in windows ?

    How to run .java file in windows without installing any program? Thx!

    First, U must make sure that there is JDK on your computer
    Then, set the envionment variables which the os can find your compiler and interpreter: javac java
    after those, you must complie your .java file to .class file, then you can excute it by java, for example " java helloworld"

  • How to run ear file in java application server

    i want how to run .ear file in java application server
    1. i m created ear file
    2. i m created jar file (bean,home,remote)
    3.i m created war file(in the form of jsp)
    but till now i couldnt run ear file
    how to run
    please hel me

    You must create :
    1.Jar file
    2.War file
    And then put them into an ear file
    Exemple : myapp.ear contains
    myappEJB.jar
    myappWEB.war
    META-INF/application.xml
    and application.xml looks like this :
    <application xmlns="http://java.sun.com/xml/ns/j2ee" version="1.4"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation="http://java.sun.com /xml/ns/j2ee
                            http://java.sun.com/xml/ns/j2ee/application_1_4.xsd">
        <display-name>myapp</display-name>
        <description>Demo application</description>
        <module>
            <ejb>myappEJB.jar</ejb>
        </module>
        <module>
          <web>
             <web-uri>myappWAR.war</web-uri>
             <context-root>/myapp</context-root>
          </web>
        </module>
    </application>Good luck

  • How to run .exe files in mac pro?

    how to run .exe files in mac pro?
    i am looking for this to play games in my mac pro.
    if someone got a answer, just let me know
    cheers.

    mailking wrote:
    And I fail to see why you are attacking me...
    My comment is Valid...  " .exe files will not run natively on Mac OS X..."
    I am sorry. I had the false impression that it was commonly known that .exe files did not run on Mac OSX natively and failed to see any constructive critique you were bringing. Maybe I am wrong. Again deepest apologies.
    Unfortunately... these days... not every one is aware of this .exe  fact..
    Apology accepted.. and Thank You..

  • How to run script file ( unix script file like ksh or sh file) using Java

    How to run script file ( unix script file like ksh or sh file) using Java Program?.
    I am using the following code snippet to run the simple commands like top or ls ,etc....
    Runtime runtime = Runtime.getRuntime();
    Process proc = runtime.exec("top");
    Thanks In Adavance
    -Siva

    String [] { "ksh" , "-c" , "script", "arg 1", "arg 2", "arg 3"}

  • How to run .sql file in tsql or powershell

    Hi All,
    HOw to run .sql file inside the TSQL or powershell using with IF else condition. This below query works fine but when i executing through the SQL Agent it's geeting an error.Please could help how to run through the SQL agent already using execution type
    in agent as 'Operating system(CmdExec)'
    Declare @computerName varchar(100), @InstanceName varchar(50)                             
    SET @ComputerName = REPLACE(CAST(SERVERPROPERTY('ComputerNamePhysicalNetBIOS') AS varchar),'\','$')  
    SET @InstanceName = REPLACE(CAST(SERVERPROPERTY('instancename') AS varchar),'\','$')
    IF (@InstanceName = 'SQL2008R2')
    Begin  
    :r C:\BackupFolder\Test1.sql    
    :r C:\BackupFolder\Test2.sql    
    End
    IF (@InstanceName = 'SQLINS2')
    BEGIN
    :r C:\BackupFolder\Test3.sql
    END
    IF (@InstanceName = 'SQL2012')
    BEGIN
    :r C:\BackupFolder\Test4.sql
    END
    Thansk in Advance
    A-ZSQL

    In T-SQL, you can try using sqlcmd to invoke sql file
    if @@SERVERNAME='abcd'
    begin
    Master..xp_cmdshell 'sqlcmd -S <ServerName> -i BackupDetails.sql -E'
    end
    OR 
     PowerShell 
    Load the snapins
    Add-PSSnapin SqlServerCmdletSnapin100
    Add-PSSnapin SqlServerProviderSnapin100
    Function Get-SqlInstances {
    Param($ServerName = '.')
    $localInstances = @()
    [array]$captions = gwmi win32_service -computerName $ServerName | ?{$_.Name -match "mssql*" -and $_.PathName -match "sqlservr.exe"} | %{$_.Caption}
    foreach ($caption in $captions) {
    if ($caption -like "MSSQLSERVER") {
    $localInstances += $ServerName
    } else {
    $temp = $caption | %{$_.split(" ")[-1]} | %{$_.trimStart("(")} | %{$_.trimEnd(")")}
    $localInstances += "$ServerName\$temp"
    $localInstances
    $instance=Get-SqlInstances -ServerName HQDBSP17
    foreach($i in $instance)
    if($i -like 'CRM2011')
    write-host 'CRM Database'
    invoke-sqlcmd -inputfile 'F:\PowerSQL\test.sql' -ServerInstance 'abcd'
    if( $i -like 'SQL2012')
    write-host 'SQL 2012 instance'
    invoke-sqlcmd -inputfile 'F:\PowerSQL\test.sql' -ServerInstance 'abcd'
    --Prashanth

  • How to run media file after Runtime.exc the real player?

    Hi
    How to run media file after Runtime.exc the real player application

    String command = "cmd /c start videotest.rm";
    Runtime.getRuntime().exec(command);

  • How to run batch file from oracle forms 9i

    Hi everyone.
    i have a data in csv file. i want to upload it to my database. i am using sql loader for it.
    i have made a batch file which run the sql loader and transfer my data to database.
    How to run batch file from oracle forms 9i.
    when i press the button, nothing uploads in my database. (when i simply run the batch file it works).
    here is my code
    Begin
    HOST('C:\temp\batchfile.bat');
    message('done');
    end;
    Thanks in advance
    regards
    sajid

    this is my log file, when i run manually.
    SQL*Loader: Release 10.2.0.1.0 - Production on Thu Jul 1 23:27:53 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Control File: file_to_upload.ctl
    There are 2 data files:
    Data File: sk.csv
    Bad File: sk.bad
    Discard File: none specified
    (Allow all discards)
    Data File: sk1.csv
    Bad File: sk1.bad
    Discard File: none specified
    (Allow all discards)
    Number to load: ALL
    Number to skip: 0
    Errors allowed: 50
    Bind array: 64 rows, maximum of 256000 bytes
    Continuation: none specified
    Path used: Conventional
    Table KHAN, loaded from every logical record.
    Insert option in effect for this table: APPEND
    Column Name Position Len Term Encl Datatype
    SR FIRST * , O(") CHARACTER
    DATES NEXT * , O(") CHARACTER
    AGENT NEXT * , O(") CHARACTER
    COUNTRY NEXT * , O(") CHARACTER
    TRANSACTIONS NEXT * , O(") CHARACTER
    PKR NEXT * , O(") CHARACTER
    USD NEXT * , O(") CHARACTER
    BANK NEXT * , O(") CHARACTER
    Table KHAN:
    11088 Rows successfully loaded.
    0 Rows not loaded due to data errors.
    0 Rows not loaded because all WHEN clauses were failed.
    0 Rows not loaded because all fields were null.
    Space allocated for bind array: 132096 bytes(64 rows)
    Read buffer bytes: 1048576
    Total logical records skipped: 0
    Total logical records read: 11088
    Total logical records rejected: 0
    Total logical records discarded: 0
    Run began on Thu Jul 01 23:27:53 2010
    Run ended on Thu Jul 01 23:27:54 2010
    Elapsed time was: 00:00:00.63
    CPU time was: 00:00:00.17

  • I am the account owner in charge of purchases but the software will be used by different people - how should I do the download and install for them?

    I am the account owner in charge of purchases but the software will be used by different people - how should I go about downloading and installing on people's computers?

    If you need several copies of Acrobat (the license is per user), then you should talk to Adobe Sales about a volume purchase. I am not sure of the details, but probably the best way to go. In that case, I think all are on the same S/N and you pay according to the number of activations or such. Again, I am not sure and you need to talk to Adobe. Adobe is currently pushing the cloud and subscription versions and you might want to discuss the various options with them.

  • How to run .pdb file

    we using Oracle 10g on AIX 6 server. In our server, have 3 different Database namely Test, training and production. I want to run a patch file extension PDB. But how can I run PDB file in Test database.

    Hello people,
    is anybody here who can give an example without
    refering to instruction how to run jar file?java -jar yourJarFile.jar
    in case if you want to be refered to instructions later during the day, [url http://java.sun.com/docs/books/tutorial/jar/basics/index.html] here it is

  • How to run SQL files from Java?

    Hi,
    Can someone point me towards a link on how to run sql files in Java? Thanks.
    P.S...if I've been completely blind please go easy on me!

    Sorry forgot the formating code thingy
    public static boolean executeScript(File script, Connection conn){
        boolean success = true;
        success = script.exists();
        if(success){
          DEBUG.print("ES::READING SCRIPT:" + script.getAbsolutePath());
          StringBuffer buffer = new StringBuffer();
          success=readScript(script,buffer);
          if(success){
            try{
              String creationScript = buffer.toString();
              Statement st = conn.createStatement();
              int start = 0;
              int end = 0;
              while (end != -1 && start < creationScript.length()) {
                end = creationScript.indexOf("GO", start);
                if (end != -1) {
                  DEBUG.print(creationScript.substring(start, end));
                  st.executeUpdate(creationScript.substring(start, end));
                  start = end + 2; //2 is the length of "GO"
              st.close();
            }catch(Exception e){
              success=false;
              DEBUG.printStackTrace(e);
        }else{
          DEBUG.print("ES::SCRIPT FILE DOES NOT EXISTS");
          success=false;
        return success;
      public static boolean readScript(File script, StringBuffer buffer){
        boolean success = true;
        DEBUG.print("RS:: reading file :" + script.getAbsolutePath());
        try{
          InputStreamReader isr = new InputStreamReader(new FileInputStream(script),"UTF16");
          int ch;
          while ( (ch = isr.read()) > -1) {
            buffer.append( (char) ch);
          if (isr != null)
            isr.close();
        }catch(Exception e){
          success=false;
          DEBUG.printStackTrace(e);
        return success;
      }

  • How to run Java 3D Applet without install java3d

    I've written a java3d applet, and it runs correctly in browser on my computer. Now I want it can be run on other computers which havent' Java3d installed. If the program runs as application, then we can use jnlp and web-start to solve this problem. But what about applet? How can I do it just like the application?
    Pls help me!

    Hello. I read this article too. It sounds interesting but I have some questions. The example is given for win32 and what about other OSs and platforms? Sun provides different libraries for different OS. According to this article it is possible to run applets without previous installation of Java3D and if a user runs Windows 2000, Java3D libraries will be downloaded and installed from the location pointed out by the programmer. But how to do this for all OSs and all platforms and architectures so that if a user doesn't have Java3D installed on his/her computer, might to see the applet in his/her browser? Is it the only way that a programmer needs to include into "loader_singed.jar" all possible libraries for all possible platforms?

Maybe you are looking for