How to run Cloned OSX after using CCC?

Hi,
I've just cloned my OSX Tiger 10.4.11 to an 80GB External HD ising CCC 'Carbon Clone Copy'. I right clicked to 'get info' on the External HD and it's reading 31GB used, but when I do the same from my internal HD, it's reading 33GB. Am I missing something at 2GB, or is that usual?
When I used CCC, I used the 'Copy all selected items' (and made sure everything was checked) because a message came up when I tried to 'Copy everything from source to target'. It said: The target volume is not large enough to accommodate a block-level clone. So I opted for the 'Copy all selected items'.
Is this why i'm missing 2GB maybe?
Also, When I open the external hard drive from teh desktop, everything's there in folders. But how do I run this 2nd HD? I restarted the laptop to see if it would give me an option to run which HD (just like logging on as different users, but I only have 1 user account and it opens automatically).
I'm going to install Leopard to this External HD but want to know how I will run it after?
Any advice appreciated!

I'm posting from a new account because I couldn't log on from my home PC (said my account has been suspended or something similar)
I got 10.5 Leopard installed onto my External HD on my MacBook Pro. It shows up as 10.5 when I go into System Preferences > Startup. I choose the External HD with 10.5 to restart/reboot and then wait. It loads but it's the exact same as my original 10.4.11?
Tried restarting it again and again and switching between the Internal HD and External HD but there's no difference even though it says so in the Startup window in System Preferences.
When i'm in my Internal HD and open the External HD on the desktop, I can see the proper files and when I open Applications folder I can see the few new applications such as Time Machine and the System Preferences icon (the same as the setting icon on the iPhone).
Anybody know what went wrong?
I was away when it was installing (said 50 minutes to go when installing leopard) so I came back after 40 minutes and it was just in the process of restarting the laptop. Everything normal came up and I waited a minute, then ejected the CD and booted up the External HD to find that it was no different.
Help?

Similar Messages

How do i access osx after using windows with boot camp

I just got a new macbook pro and i have never used boot camp. well i loaded windows 7 using boot camp and now I dont know how to get back to osX. Can anyone help?

lathscope,
do you notice a little triangle on the bottom right corner of your screen - near the clock (in Windows)? If you do so, click on it. Shoud appear an option to restart the computer in Mac OS.
Other option is to go to the Control Panel. There is a icon for Bootcamp there.
Joster

How to call smartform FM after using SSF_FUNCTION_MODULE_NAME?

Hi Experts,
How to call smartform FM after using SSF_FUNCTION_MODULE_NAME?
I mean, in driver program i called SSF_FUNCTION_MODULE_NAME to get the related FM for my smart form. after that How do I call it(smartform fm) . I tried to call by pressing PATTERN button in Report. but it is showing FM is not exist error.
Call function SSF_FUNCTION_MODULE_NAME
Export
formname = 'zsmartform'
import
fm_name = function_name.
function_name is stored the corresponding smartform fm. then How do i call it to process my smartform?
thanks in advance.

hi,
Chk this sample.
DATA: p_output_options TYPE ssfcompop, "occurs 0 with header line
p_control_parameters TYPE ssfctrlop. "occurs 0 with header line
p_output_options-TDCOPIES = 3. "number of copies.
p_output_options-tddest = 'LP01'. "def
p_control_parameters-no_dialog = 'X'. "no dilog box
p_control_parameters-preview = 'X'. "no preview
DATA : v_form_name TYPE rs38l_fnam.
*---- Function to get the function module name of the    ----
*---- specified Smart form.                              ----
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'GIVE YOUR SMART FORM NAME'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3 .
*---- Function Module to call the Smart Form          ----
*step 1 - go to ur smart form
*step2 - take environment
*step3-take function module name
*copy that unique number.
*step4 -come back to ur driver program.
*step5 - place ur cursur here. take patter,.give that unique number.
*at that time u will get the below code.
*step6 - rename that unique number with 'v_form_name' in the code generated by pattern.
CALL FUNCTION v_form_name
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_PARAMETERS =
control_parameters = p_control_parameters
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
output_options = p_output_options
user_settings = ' '
* ARCHIVE_INDEX_TAB =
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
for any clarifiaction pls revert.
regards,
Reshma

How to run report from form using run_object_report

I AM USNING FORMS9I/REPORTS 9I , HOW TO RUN REPORT FROM FROM USING RUN_REPORT_OBJECT AND HOW
TO PASS PARAMETER AS WE DID IN RUN_REPORTS PLEASE HELP ME

here an example !
I hope this example you can use it
PROCEDURE pr_reporte IS
BEGIN
DECLARE
     repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status Varchar2(20);
d1 DATE;
d2 DATE;
BEGIN
     d1 := :GLOBAL.DIA_INI;
     d2 := :GLOBAL.DIA_FIN;
     repid := find_report_object('rep_lab02');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'p_fec_uno='||to_char((add_months(last_day(d1),-1) +1),'DD/MM/YYYY')||' '||
     'p_fec_dos='||to_char(d2,'DD/MM/YYYY'));
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
     v_rep := RUN_REPORT_OBJECT(repid);
     rep_status := report_object_status(v_rep);
     WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
          rep_status := report_object_status(v_rep);
     END LOOP;
     IF rep_status = 'FINISHED' then
          WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
     ELSE
          ventana('E','error reporte no encontrado','S');
     END IF;
END;
END;
The 'rep_lab02' is the name of the report that you give in the node reports
p_fec_uno and p_fec_dos they are the parameters in the report
repserver is the name of server created with rwserver
Greetings

How to run media file after Runtime.exc the real player?

Hi
How to run media file after Runtime.exc the real player application

String command = "cmd /c start videotest.rm";
Runtime.getRuntime().exec(command);

How to run the BAPI after creation or Modification ?

HI Abapers,
How to run the BAPI after creation or Modification ? What is the step by step procedure to run the the BAPI?
Immediate reply is highely appriciable.
Regards,
Chow.

Hi
If you have done with BAPI creation correctly Run it similar to the fun mdule which we run in SE37 calling this BAPi in the program with CALL FUNCTION and passing the necessary parameters
see the sample bapi code how it is called in Program
data : w_resb_header like bapirkpfc.
data: begin of itab_resb occurs 0.
include structure bapiresbc.
data: end of itab_resb.
data: begin of itab_bapi_return occurs 0.
include structure bapireturn.
data: end of itab_bapi_return.
data : w_resb_no like bapirkpfc-res_no.
w_resb_header-plant = p_werks.
w_resb_header-res_date = sy-datum.
w_resb_header-created_by = sy-uname.
w_resb_header-cost_ctr = '0000010001'.
w_resb_header-move_type = '201'.
w_resb_header-gr_rcpt = w_room_time.
w_resb_header-part_acct = 'OR'.
*ITEM DATA
loop at i_details.
itab_resb-material = i_details-matnr.
itab_resb-plant = i_details-werks.
itab_resb-store_loc = i_details-lgort.
itab_resb-quantity = i_details-qty.
itab_resb-unit = i_details-meins.
append itab_resb.
clear itab_resb.
clear i_details.
endloop.
call function 'BAPI_RESERVATION_CREATE'
exporting
reservation_header = w_resb_header
NO_COMMIT =
MOVEMENT_AUTO =
importing
reservation = w_resb_no
tables
reservation_items = itab_resb
return = itab_bapi_return
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'
IMPORTING
RETURN = .
wait up to 5 seconds.
w_resb_no contains your reservations numnber
Regards
Anji

How to run statement b after ensuring statement a is finished?

statement a
statement b
How to run statement b after ensuring statement a is finished?

s021126 wrote:
The program start the timer when the connection is not finished.Then connect() returns before it connected.
Since Ranking is not a class from the JDK, we can't tell you what it does.
How can I do?Check with whoever gave you the Ranking class.

How to safe a project after use varispeed

how to safe a project after use varispeed. I speeded the project succesfully down and then I want to save it so I bounced it. When I listened it back it was the original project, not the slow down. What to do? I use Logic X

I can only speak from Logic 9.
Did you bounce from the Master Bus?
A varispeed created audio file has to be bounced from the Master Bus.

How can I execute program after using F4_Filename function?

Hi all,
I'm a new user on the forum. I've been working with ABAP and SAP for a few weeks. I wrote a program for importing data from excel file to SAP using BDC. During searching this forum I found information about F4_Filename function which allows users to browse the disc for a file. I'd like to add this function to my program. I have a parameter for a file name but this is an ordinary static string field. When I added the code which I found in the message on this forum the rest of program doesn't execute.
This is simple program for example:
REPORT Z_TEST8_AB.
DATA f_name TYPE STRING.
PARAMETERS p_file like rlgrap-filename DEFAULT 'c:\test.xls'.
f_name = p_file.
write:/ f_name.
This program works correctly. There is a field for parameter. I can change the default name for a file.
After all, I can run the program (F8) and rest of the code is executed. The field for parameter dissapears from the screen and the file name is displayed. ( command write)
Now I added a function F4_Filename
REPORT Z_TEST8_AB.
DATA f_name TYPE STRING.
PARAMETERS p_file like rlgrap-filename DEFAULT 'c:\test.xls'.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
       exporting
            program_name = syst-repid
            dynpro_number = syst-dynnr
            field_name    = 'p_file'
       importing
            file_name     = p_file.
f_name = p_file.
write:/ f_name.
I can browse a computer for a file now but after selecting the file I can't run the rest of the code. When I click on the icon or press key F8 the field for parameter doesn't dissapier and the command write is not executed.
What do I do wrong?
Could anyone suggest me a solution? How can I executed the code after using this function?
Thanks in advance.
Regards,
Arek.

Hi arkadiusz,
1. simple
2.
<b>start-of-selection.</b>
f_name = p_file.
write:/ f_name.
regards,
amit m.

How to run a batch file using tigger....

Hi, i am trying run a batch file using a trigger on a table.
say i have a table XYZ(col_1 varchar2 primary key, col_2 varchar2)
the values of col_2 keeps changing and col_1 are constant
whenever the value of col_2 in any row changes from "on" to "off" i want to run a batch file C:\Users\ABC\Desktop\test.bat
i did some searching but couldn't find any solution. Thanks in advance
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
sorry wrong foum to post.
will post in the correct one
how to run batch file using trigger?

Hallo,
welcome to the forum.
This is the forum for the tool {forum:id=260}. Your question should be placed in {forum:id=75} or {forum:id=61}.
When you post your question there please provide additional information like db version, what kind of trigger you want to use, how you want to prevent the execution when the transaction is rolled back... {message:id=9360002}
Regards
Marcus

How to run a script after resume from disk in pm-utils

When I use pm-hibernate, I have a few scripts that I would like to run upon de-thawing. At the moment, all I want to do is module-related: I want to remove the pcskpr mod (which I have blacklisted in my rc.conf MODULES array, but HAL loads it upon thawing) and reprobe the ath9k mod (wireless doesn't work until I modprobe it).
I see that you can insert your own hooks for pm-utils, but when are they run? I need my script to run after HAL has its way with my module-probing/loading and I'm not getting a clear impression that this is the case. If not, then what other options exist?

tomk wrote:
Arch wiki wrote:The hooks in this directory will be called in alphabetic order during suspend (that's the reason their names all start with 2 digits, to make the ordering explicit) and in the reverse order during resume.
That seems clear to me. What else are you looking for?
But pm-hibernate does some of its own work for hibernation/thawing. I'd like to know where in relation to *that* the hooks are run. Ie, during hibernation, are they run before or after the vanilla pm-hibernate functionality?

How to Run a text files using UNIX

Hi,
I have 10 text files in my project my task is to load all the text files data into Relational Database so i can use sql*loader to load all the text files data into a Database.
but the thing is another project i have 200 text files so i need to run these text files using UNIX script could anyone tell me how to load all the text files using UNIX
Thank's
Edited by: Lavanya on Sep 5, 2012 3:09 PM

Lavanya,
This question relates to shell scripting and in IMO it is not an oracle question.
I have made some initial assumptions before my proposed solution.
PLEASE note that this is untested, but can just guide you as a template for solving your problem.
Assuming that you have properly set up the control file and mapped each and every table in it as per the file information which you have..
Assuming the text file to be in the format of : ------ (as suggested by other posters earlier, this file holds instructions about the file and table mapping which shall be used by your sqlldr process.)
tmp.txt:
text_file_1-------------should goes to----customer_info_table
text_file_2------------should goes to------customer_address_table
text_file_3-----------should goes to-------customer_order_table
while read line
do
SQLLDR CONTROL=`echo $line | sed 's/should goes to/ /g' | sed 's/-//g' | awk -F " " '{print $1}'`.ctl,
LOG=`echo $line | sed 's/should goes to/ /g' | sed 's/-//g' | awk -F " " '{print $1}'`.log,
BAD=`echo $line | sed 's/should goes to/ /g' | sed 's/-//g' | awk -F " " '{print $1}'`.bad,
DATA=`echo $line | sed 's/should goes to/ /g' | sed 's/-//g' | awk -F " " '{print $1}'`.txt
USERID=scott/tiger
done <tmp.txtAll I am trying to run from the above shell script is : -- PLEASE TEST it if it matches your requirement.
SQLLDR CONTROL=text_file_1.ctl, LOG=text_file_1.log, BAD=text_file_1.bad, DATA=text_file_1.txt USERID=scott/tiger
SQLLDR CONTROL=text_file_2.ctl, LOG=text_file_2.log, BAD=text_file_2.bad, DATA=text_file_2.txt USERID=scott/tiger
SQLLDR CONTROL=text_file_3.ctl, LOG=text_file_3.log, BAD=text_file_3.bad, DATA=text_file_3.txt USERID=scott/tigerRepeating my assumptions, I assume you have all those files required for SQLLDR process to run (ctl file, data file...)
Cheers,
Manik

How to run a jar file using Java application.

Hi all,
I know that jar file can run using the following command, using the command prompt.
java -jar jar-fileBut I don't know how to run that command through a Java code. Hope it's clear to you.
So can you please explain how can I do it.
Thanks,
itsjava

rayon.m wrote:
The solution given by ropp appears to have nothing to do with what you asked about.Ok sir, I got the point.
I've try a test as follows. But it doesn't give any output. Even not an exception.
        try {
            String[] temp = new String[]{"java", " -jar", " MainApp.jar"};
            Runtime rt = Runtime.getRuntime();
            Process proc = rt.exec(temp);
            int exitVal = proc.waitFor();
            System.out.println("ExitValue: " + exitVal);
            System.out.println("Temp_Values");
        catch(InterruptedException ex) {
            System.out.println(ex.getMessage());
        catch (IOException ex) {
            System.out.println(ex.getMessage());
        }I've debug and see, but the exitValue is even not exist at run time. Can you tell me where I'm going wrong.

How to select the particles after using the Particle Analysis

Can I select the particles after the particle analysis directly, like chosing #1, #2 ..., or should I run the particle filter using the measured parameter?

Hello Ishi,
I now have a much better idea on what you are trying to do. If you run the IMAQ Particle Analysis Report VI on the thresholded image that contains particles, an array of clusters will be returned that will contain specific information for each particle including the area, number of holes, bounding rectangle coordinates, center of mass, orientation, and dimensions.
To find out which particle is which in the image, index the Particle Reports (Pixels) output of this VI, unbundle the cluster to extract the Bounding Rectangle cluster, and then pass it to the Rectangle input of an IMAQ Overlay Rectangle VI. This VI will overlay a bounding rectangle onto the image to show where the particle is located. You can specify which particle you want highlighted by changing the array index of the Index Array VI that is responsible for extracting a specific cluster of particle information from the Particle Reports output of the IMAQ Particle Analysis Report VI.
Regards,
Mike T
National Instruments

How to run java file by using another applet file ??

how to compile and run java file by using another applet or japplet file .

how to understand what you are talking about.

How to run Cloned OSX after using CCC?

Similar Messages

Maybe you are looking for