How to run eclipse in macbook pro?

sir,
i have intalled eclipse software to use c++in my mac book pro...i installed the software but the software is not compiling the project i need urget help as i have to use my c++ language asap...thku

eclipse-mac.en.softonic.com/mac
this software ... i can write the prog on wall but im not able to run it..

Similar Messages

How to run AHT on MacBook Pro 4,1

I would like to know how to run AHT (Apple Hardware Test) on my MacBook Pro 4,1 (early 2008) because I tried to follow the Apple support but I am not sure what to do. I updated my Mac to OS X 10.9 but I still have the original disks of Leopard 10.5
Thanks in advance
Cheers,
Jass

Look at the 'second' installation disk. It should have the AHT instructions on it. Insert the disk into the DVD drive and hold the D key.
Ciao.

CS4 runs on iMac mavericks - how to run on new MacBook Pro

Now, I have CS4 on my iMac that runs mavericks OS. It runs fine. I now have a new laptop (my second computer) which is a MacBook Pro retina display, flash memory, no hard drive. I have my original CS4 CD and the serial number. How can I load CS4 onto my second computer?

Download the CS4 installer from http://helpx.adobe.com/download-install.html
Install then enter your serial number.

How to run diagnostics on macbook pro

my mac keeps crashing and I want to run diagnostics but can't remeber how to access this at start-up

Try option d. This will attempt to load an Internet version of Apple Hardware Test.
Your Mac would have to be one of the following models, and have its firmware updated, if applicable:
Computers that can be upgraded to use OS X Internet Recovery

How can I get my macbook pro running Lion to print on my HP photosmart 309a??

how can I get my macbook pro running Lion to print on my HP photosmart 309a??

Did you install the drivers? Or have Software Update install them? This printer is supported:
http://support.apple.com/kb/HT3669

HT201262 How can I Recover original (MacBook Pro) Mac os from Windows XP running Windows os

How can I Recover original (MacBook Pro) Mac os from Windows XP running Windows os because on Bootcamp I don't see Mac Os. Hear is only show Windows.
And option is restant with Window. When I reimstall windows on my Mac via bootcamp then may be I delete any one from all of (3) partition. Please help me to reinstall my Mac o

No, Please check the attachment file.

How do I fix my MacBook Pro that continues to abruptly turn off, no matter what I am doing? Even after deleting items/trying resolution methods?

How can I fix my MacBook Pro? I have a relatively recent model of the MacBook Pro. I’ve been running Mavericks.
For the past few days, it has been randomly clicking off by itself, I guess crashing. I would be online or just doings on it, sometimes nothing at all, and the screen would go black, the computer would turn off. Then, I would proceed to try to turn it back on, and it won’t turn on for several minutes, no matter what buttons you push. I tried doing an SMC reset for myself. It did not help much. I deleted all my personal files, including plug-ins, especially flash player. I thought that helped, but the computer proceeded to turn off minutes later. Then, out of frustration, (as I have done twice or so before since having the computer) I did what may be called a factory reset for my computer. I erased the current operating system information/memory in disk utility, and then went on to reinstall OS X. This was working fine, and then, a few minutes into the downloading process, my computer turned off once again.
Now, I have no system to operate on. I keep turning the computer back on to try to do it again. But now, the computer tries to do a remote or internet recovery, and tries to re-download an operating system using my WiFi. I’m sure this would be successful, but the computer can’t function for more than a minute or two without crashing/turning off.
I am fairly certain that my power button is NOT stuck.
I did earlier notice the fan making noise, before doing the SMC reset.
The computer did seem to say there was no batteries available at one point.
(But all of this was okay after some point, and I was just doing the reset to try to correct the turning off the system was still doing)
A week or two ago, I did have a glitch where my desktop picture was flashing and acting weird, and other functions on my computer keyboard not working, like volume, keyboard brightness, etc. But I did fix it.
I have not ever had much on this Macbook pro. I do not download applications. I do not store nearly any files on the computer. I usually only use the flash player plug-in. This computer is only used for doing work/business, and for personal use online.
I can’t see why I would have so many problems.
Is it possible that erasing the memory twice or so before is causing an error or issue in the drive?
What is the root of this problem, and how can I fix it on my own?
I can’t really make any progress on the computer since it turns off after only a minute or two no matter what you are trying to do.
What do I do now?

kapots3v4,
if your MacBook Pro doesn’t stay active long enough to perform an OS X Internet Recovery, then you should make an appointment at your nearest Apple store or Apple-authorized service provider to have them diagnose what’s ailing it.

How to restore display on MacBook Pro to original settings after faulty external display connection

Rookie question, 2009 MacBook Pro. We bought a dvi-VGA adapter to connect to an external display. Got a picture on the external monitor but very poor resolution. Meanwhile the display on the MacBook Pro re-set itself and we were not able to restore it to normal even after we disconnected the external monitor. We now have our MacBook Pro with messed up resolution and display, AND no external display. How do we get the MacBook Pro back to its default display settings? Any help greatly appreciated!

this is from another discussion:
jk10003
Re: MacBook doesn't sleep when closing lid with external monitor attached with Lion Oct 14, 2011 7:01 PM (in response to admgtz)
I would like to offer this solution. I have a MacBook Pro with an external monitor, and, for a year and a half both displays slept when I closed the MBPS. This behavior stopped when I installed Lion. They would sleep when I removed the power cord, but what a pain that would be. The command "pmset -g assertions" gave no indication of which process ought be preventing sleep.
I contacted Apple support, and after some searching, the guy working with me found this thread, which was flagged as an Apple-approved solution:
https://discussions.apple.com/thread/3190417?start=165&tstart=0
This is the important part:
Correct AnswerRe: How do I tell Lion to disable the LCD screen even when the lid is open?
Aug 31, 2011 9:56 AM (in response to Bob_viking)
Here's the command to make your laptop behave like it did Pre-Lion (courtesy of my friend):
sudo nvram boot-args="iog=0x0"
Works perfectly for me. If it screws up your system, just zap the PRAM next boot (cmd-opt-p-r) and you'll be back to the default Lion state. Or if you can still get into terminal, this command will get you back to Lion's default state as well:
sudo nvram -d boot-args
Enjoy!
One snag was that I had to run it with the external monitor disabled, but it worked great!

How do I get my MacBook Pro to recognize my Toshiba external hard drive?

How do I get my MacBook Pro to recognize my Toshiba external hard drive? I'm working on transferring my music from our home computer to my new laptop and I already got all my music onto the hard drive but now, when I plug it into my MacBook Pro, it doesn't recognize it. There isn't an icon that pops up and nothing happens at all. The blue light on the hard drive that indicates that it knows it is plugged into something comes up but that's about it. Someone told me I might have to "format" it but I don't know what that means and I don't know how to do it. I just want to get my music from the hard drive to my laptop so please help!

natgray17 wrote:
I don't know about your first question... I went to finder, preferences, then general but I didn't see anything for the hard drive.
Huh, in the Finder menu, Preferences, you will see this:
Nope, disk utility cannot see it. I've tried unplugging it and plugging it back in but it still won't recognize it.puter that's a Mac...
If DU cannot see it then the preferences is just an academic exercise.
If this is a USB drive then as mentioned above you may need a powered USB hub since there may not be enough power from the USB to run the drive. What else do you have plugged into the USB ports? If there's some stuff you can unplug it then do it and see if your drive mounts.
What do you mean from a Windows machine? It's a Toshiba hard drive and I put my music on it from my home computer that's a Mac...
Which is all I wanted to know, i.e., whether the drive came from a Winows machine. So it's been formatted and created on a mac. Therefore it should mount on this other mac machine. So it most likely is a power problem.

How do I partition my MacBook Pro so I can keep Snow Leopard and also install Mountain Lion?

How do I partition my MacBook Pro so I can keep Snow Leopard and also install Mountain Lion?
I want to install the latest OS, but I already know that I will lose a lot of my software unless I can partition the hard drive and have two "bootable" drives.
How do I retain everything I have, partition the drive, then reloa the software I own according to which OS it will work under?

msmedia wrote:
I do not currently own OS X ML.
I am currently running OS X (10.6.8 Snow Leopard) on my MacBook Pro. It has a 2.8GHz Intel Core 2 Duo Processor. I want to upgrade to Mountain Lion, but many of my software titles will not operate with ML and I cannot afford to replace some of them (Adobe Creative Suite, for e.g.)
After I back-up my HD and then partition the HD, how do I use the back-up to reinstall what I want to the SL partition, and then place the rest on the ML partition.
I have not done what you want to do, so can only offer some general thoughts in support. Take value from the following where you can. No guarantees.
If it was me, I would use a disk clone utility (e.g. Carbon Copy Cloner) to image the existing Snow Leopard disk to an external drive. Then verify that the external drive would boot and run Snow Leopard normally.
I would then purchase and download the Mountain Lion upgrade installer, but not run it. Use Lion Diskmaker to make a bootable USB stick, and perform a clean install of Mountain Lion, replacing the Snow Leopard on your MBP. This way, you make absolutely certain that no third-party drivers or other SL cruft remains to make Mountain Lion unstable. Update to latest ML point release. Fix permissions. Let TimeMachine make a full backup of your ML installation to a different external drive. Then turn of Time Machine.
In Disk Utility, use the + sign at the bottom of the ML partition to add another GUID, HFS+ Journaled partition for Snow Leopard. Resize to taste. Name it differently from your ML partition. Exhale.
Now ideally, you would like to reverse the external clone and put it back into the new SL partition. Then fix permissions. And demonstrate that you can boot into individually stable OS X installations. This would save you alot of work. Resist copying your home directory into ML just yet.
If you cannot successfully achieve the preceding paragraph, you will be faced with a full SL and application reinstall.
The ~/Library contents for SL and ML are sufficiently different that you do not want to mix them. You may want to salvage Safari bookmarks.plist. And, ML created folders in the home directory may have different permissions or ACL settings than in SL. So, my rule of thumb would be to copy folders that you created in SL, and only the contents of matching named OS created folders such as Music, Pictures, Downloads, etc.
For each operating system, you probably want the Time Machine settings to exclude the opposite OS X partition. If you use the same host name in Sharing prefs, then you will mix SL and ML backups on the same Time Machine back up drive. If you use different host names, they will be distinct folders in the Time Machine backups.backupdb and allow discrete restores per host. You may also want to gag Spotlight from indexing the opposite OS X partition.

How can i charge my macbook pro with a inverter

how can i get my macbook pro to charge using a inverter sometimes it will charge and sometimes it wont works fine when plugged into a ac outlet in my home

pennbank wrote:
The macbook has to be in sleep or shutdown mode if using an inverter
more possible fixes here
https://discussions.apple.com/thread/3026063?start=0&tstart=0
Although that may be true with some inverters it is not for all of them. If the inverter can get enough power to invert you can run a power saw off them, depending on the size of the inverter.
Problems start because people buy the lowest cost unit they "THINK" will work based on the printed specs when in fact they need a bigger unit.

How to transfer files from MacBook Pro pages app to iPad mini pages app?

How to transfer files from MacBook Pro pages app to iPad mini pages app?

The above assumes you are running current software.
Mac - OX X 10.9.2, Pages 5.1.
iPad - iOS 7.0.6, Pages 2.1.

How can i get my macbook pro too stay on and not sleep when lid is closed?

how can i get my macbook pro too stay on and not sleep when lid is closed?

If the machine is asleep, lid closed, and you plug in to an external monitor and an external USB keyboard, the machine will wake, anbd reconfigure the screen resolution for the external monitor, Once it has made this configuration change, you can open the lid and it will continue to address only the external monitor. At least that's how my early MacBook Pro unibody 13" works. It seems to run a bit cooler this way. It gets quite toasty with the lid closed while doing anything demanding and you are more likely to hear the fan come on. I have not seen any temps that would cause alarm, but I do get a high speed (6000 rpm), noisy fan sometimes with the lid closed, .
If you operate in the open-lid, external monitor only mode, if you deactivate the monitor for any reason, when it reactivates it will be running both screens, with all the navigation hassles this entails, so I generally set it not to deactivate the screen when in this mode.
Thus I agree with those who say that some of the cooling air is drawn in around the keyboard, the difference in cooling performance is observable. If you activate istat pro, get the computer hot running in clamshell mode, and open the lid, you can watch the CPU temp drop by a few degrees C within a couple minutes. It isn't a huge difference, but enough the lower the fan speeds.

How many fans have a macbook pro 15"

hia
i wanna Know how many fans have a macbook pro, I run istat pro widget and apears only 1 fan (left fan), I dont Know if the computer only have 1 or is a problem with mine.
thanks, really sorry for my english

ticoy wrote:
sorry I dont understand what try to say me (because my english), I have MacBook Pro a 2,53 GHz, MacBookPro5,4, Intel Core 2 Duo
(MC118*/A), I buy in september, came with snow disc.
thanks
That is the one I have and it has only one fan. I have had it apart. Here is a picture I took of it inside:
http://members.all2easy.net/gregory/MacBookPro15-253.jpg
This is one of the simplest, cleanest laptops I have seen inside since the very first Mac laptops like the PB-145, PB-180.

How can i reset my macbook pro without not deleting ilife pack?

Hello ! my macbook pro(13) stars more slowly then before . i am sure there are many unnecessary files that should be deleted. i want my macbook pro to be lke the fist day. So how can i reset my macbook pro without not deleting the ilife pack. ?

çağrı şahaplıoğlu wrote:
Hello ! my macbook pro(13) stars more slowly then before .
Your issue may not have anything to do with your files, it could be a corrupted cache file, reinstalling your OS and files from backup could be overkill and too much work.
Run ALL of the free OnyX's checks, cleaning and maintainence aspects (not the log files) and reboot at the end.
http://www.titanium.free.fr/
Your machine will act a bit slow until the caches and spotlight are rebuilt, but it should act faster
Your next step is to use OnyX Verify Preferences and "show only corrupt plist" files
If you find some, make a note of their location and remove then to your desktop and reboot and start the programs responsible, reset your preferences.

How to run eclipse in macbook pro?

Similar Messages

Maybe you are looking for