How to run eg. 'make' without sudo?

Hi,
After upgrading from Snow Lepard to Leo I understood I am not able to run Unix commands in Terminal (eg.'make'). System tells me that there is no 'make' command available. But if I do 'sudo make' - it is there and available.
So my 'nix environment created and used for years is no longer healthy. How I can return to my previous status when 'sudo' was not necessary? I hate to alter all scripts with 'sudo' or run those with 'sudo' upfront.
Alex

In your developer suite, under forms developer you can find a link called "run a form on web"
open the link
in form field give the file name with full path
for instance c:\forms\test_form.fmx
before running the form you need to compile the same in your forms builder 10g
give the username/password@connnectionstring in the user id field
ensure that the web host and web port fileds are filled up with the relevant details.
if u don't know, run the form from the form builder to get the name of the host and port number
for instance
http://server_name:port_num/forms/frmservlet
here server_name will be replaced by the machine name you work and port will be after the colon (:) sign
now press the run form button.
Make sure that oc4j instance is running before you try it
if oc4j instance is not running, then start the oc4j instance from the form developer link

Similar Messages

How to run the form without logon?

sir:
I want to create the application without logon,but before the
form appear,I must logon, I want to know how to run the form
without logon(comment:I don't connect to database!);
null

steve (guest) wrote:
: Create trigger ON-LOGON. Supply alternative logon code
: or NULL; if you want to do nothing. Form will execute
: but will not produce logon window.
: gang lee (guest) wrote:
: : sir:
: : I want to create the application without logon,but before
the
: : form appear,I must logon, I want to know how to run the form
: : without logon(comment:I don't connect to database!);
Mr steve,thanks for your help!
null

How to run java servlet without using Web.xml?

How to run servlet without using Web.xml? From a book, I know that web.xml descriptor is optional, but the book doesn't tell us how to run java servelet without web.xm descriptor. So how to do that? Thanks a lot.

How to run servlet without using Web.xml?But Tomcat now uses a web.xml for its global server-wide configuration.
If you'd like to invoke a servlet with:
http://host/servlet/ServletName
you have to enable the invoker servlet.
[from an HTML]
<FORM METHOD="POST" ACTION="/servlet/HGrepSearchSJ">
[from resin.conf of Resin Web Server 2.1.12]

<servlet-mapping url-pattern='/servlet/*' servlet-name='invoker'/>
[from TOMCAT5.0.19/conf/web.xml, a global server-wide web.xml file]












    <servlet>
        <servlet-name>invoker</servlet-name>
        <servlet-class>
          org.apache.catalina.servlets.InvokerServlet
        </servlet-class>
        <init-param>
            <param-name>debug</param-name>
            <param-value>0</param-value>
        </init-param>
        <load-on-startup>2</load-on-startup>
    </servlet>
---comment out below----------------------------------------------------------

How to run a programm without dos-box

hello everybody,
if have got a "simple" question:
How to run a java-programm under windows without an dos-box?
Whenever I start an programm from a batch-file a console is opend, I dont need that console and want it to disapear!
can anyboby help me? are there special tool or anx tricks?

... and remember to call exit in the batch file, otherwise it may stay visible.

How to run a Plugin, without opening Adobe indesign

Hi,
Does anyone know how to run a plugin as a service or something like that...
What i want to do is,
I have written a plugin that can read texts from indd files & save them as .txt files.
now i want to put indd files in to a folder & once a new file comes to the folder, read that new file automatically and save as txt.
for that I want to run the plugin, without opening the indd file.
I hope CS6 SDK support to do that.
Please let me know if anyone has any idea...
Thanks.

Hi Menan,
Thank you very much for your reply...
I'll explain you what my requirement is,
My final goal is to run the Indesign application(including my plugin) in a server & put all indd files in to a location(ex.folder) &
once an indd file comes to that folder it'll be automatically read by Indesign application & save the extracted data in a separate location(ex.another folder) as tex files. then human interaction is not needed...
My precsent problem is,
Can I read an indd file, without opening indd file in Indesign application (may be giving a path to a indd files included folder or some way like that).
Currently,
first i open the Indesign Application -> Open the indd file(intended to be read) -> Run my plugin.
Now I Get the document with,
IDocument* document = Utils<ILayoutUIUtils>()->GetFrontDocument();
But what I want is,
while the Indesign application is running on a PC, if an indd file comes to a given location(folder) it to be read automaticaly without opening my pluging.
To do that My idea is,
* Any time when the Indesign apllication is opend my plugin should automatically start running,
* once a new file comes to a given location(folder) plugin shoud be automatically triggered & read the file.
Please help me with your ideas..
Thanks.

How to run java application without having java environment in a machine

can i run java application without having java environment(JVM) in a machine.I mean i dont have installed j2se or jdk in my machine.And i have an j2ee application running on another host which is built in swings.I want to access that application in my machine
can any one help regarding my problem

If you only need to access the program from one machine and you are running a Unix-like operating system (e.g., Linux, Solaris), you can use the remote display capabilities of X11. In this case you have to choose the host where the app will be displayed when you start it:
$ DISPLAY=<hostname>:0.0
$ export DISPLAY
$ java ...
If you want to be able to display it on both machines at the same time, or if you are using windows, then try something like VNC (http;//www.realvnc.com). Or if you are running windows and your version supports it, you can use windows remote desktop.

How to run all slides without stop?

I´m watching an online course made with Flash.The course consists
of several chapters/slides. After every slide I have to press the play button
to start the next slide, which is a huge interference
How do I make all slides run without me having to start all of them manually??

There are plenty of folks that design things that don't do what others expect they should. These forums themselves are a grim example of that. I, personally, wouldn't bother getting so worked up about it--there are far greater woes in life than presentations that don't play thru without using controls.

How to run a script without Photoshop's GUI or...

within GUI, but without animation of every command in the script?
I need to process huge number of pictures - animation makes serious impact on performance...
Thanx all.

In VB/VB.Net you can use the visible property and make Photoshop invisible. I don't think it appreciably speeds up the processing but it does seem to help some.
The downside is if your application has some kind of issue and doesn't make Photoshop visible again before quitting. At least in older versions (pre CS3) I experienced Photoshop not showing itself even after stopping and restarting, including re-booting etc. You had to run a program that made it visible again. At least that was my experience.
I don't know if that is still true in CS2/CS3/CS4 however and may not be.
While I haven't done any highly controlled bench marking, I have found that in CS4 (at least the original public release of it), VB.net seemed to outperform java script doing the same thing by about 33%. I did my best to make both as efficient as possible and I just couldn't get the java script stuff to operate as fast. I was surprised. Again, it wasn't as controlled as it should have been, but it was at least consistent.
Another thing that should make the execution more efficient is to make sure the layers palette is either not shown or is collapsed. That actually seems to speed things up quite a bit. The program doesn't have to show all the changes happening in that palette. Of course all pallets that change upon execution of commands should also be closed or collapsed. This should be done even if you are going to minimize and/or hide photoshop too. I'm of the opinion (via observation) that the program knows when these palettes don't need to be updated and so they must avoid doing the code behind the display of the change.
Regards
George Smith

How to run a subVI without poping up normally, but when clicking a button, popup the front panel?

I know pop-up the front panel of a subVi when called by selecting VI Properties>>Windows apperence.
But what I need to do is: always run the SubVI inside the parent VI as the nornal subVI do without poping up. But when I click a button"show front panel", the SubVI popup the front panel.
Is there anyway to do this?
Thanks,

ossoo,
You can use a static VI reference to the subVI and then use the Front Panel Open invoke method to show the front panel when you want. I have attached two VIs that show this. I saved these VIs for LabVIEW 2009 so you should be able to open them up and run them in 2009 or later. Add.VI is the subVI that you are calling. The Caller.VI is just a While Loop that contiually calls the Add subVI. Inside of the While Loop is also a Case Structure with a Static VI Reference (you might need to change the path this is pointing to after downloading the VIs to your computer for this to work) and the Front Panel Open invoke method. You can run the Caller.VI and interact with the main Front Panel as normal and see the subVI but then you can click the Open subVI? boolean button and it will open the subVI's front panel. You can continue to interact with the main front panel and see the values update on the subVI's front panel as well. You can just close the subVI's front panel when you are done viewing it. Does this help?
Grant H.
National Instruments
LabVIEW Product Marketing Manager
Attachments:
Caller.vi ‏19 KB
Add.vi ‏23 KB

How to run the servlet without getting message window?

while running servlet,i got a message window that 'Do you want to save:val?'how to rectify this problem while running servlet.
Actually i saved the servlet files as HTTP and Generic.java respectively.
In web.xml file,the content is as follows
<servlet>
<init-param>
     <param-name>title</param-name>
     <param-value>GenericServlet Example</param-value>
     </init-param>
     <init-param>
<param-name>heading</param-name>
<param-value>Servlet Program</param-value>
</init-param>
<servlet-name>G</servlet-name>
<servlet-class>Generic</servlet-class>
</servlet>
<servlet>
<servlet-name>H</servlet-name>
<servlet-class>HTTP</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>G</servlet-name>
<url-pattern>/generic</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>H</servlet-name>
<url-pattern>/http</url-pattern>
</servlet-mapping>
======================================================
The html file is as follows
<html>
<body>
<form action="generic" method="get">
User Name<input type=text name=t1><br>
Password<input type=password name=t2><br>
<input type="submit" value="GenericServlet Output">
</form>
<form action="val" method="get">
User Name<input type=text name=t3><br>
Password<input type=password name=t4><br>
<input type="submit" value="HttpServlet Output">
</form>
</body>
</html>
======================================================
I executed the servlet as http://localhost:8080/stalin/sample.html
and clicked the sumit button in the html page.
During that time i got a problem but not getting the output.The problem is I got a message window?
can anyone help me clarify my doubt plz

That would occur if either the content type in the header is wrong (e.g. it is not text nor image, those content types with which the useragent used is associated), or if you have set content disposition in the header to attachment instead of inline.
So, doublecheck the headers.

How to run my class without SDK

hi,
I wrote a swing application. I created myclass.class
Now I want to send it to my friend so they will be able to run this and use it.
I tried to test this on computer that doesn't have SDK but has only JRE (latest version).
I put the class is in folder c:\test
when I run the cmd:
java -cp c:\temp myclass
or
javaw -cp c:\temp myclass
(I tried also
"C:\Program Files\Java\j2re1.4.2_06\bin\java.exe" -cp c:\temp myclass
again - nothing happens!!!)
nothing happens!!!!
my question:
How can I run my application on computers that has only JRE?
Please help.
Thanks

OK - problem solved.
due to path ver - it used the wrong class.
Thanks any way - and have a nice weekend.

How to run a plugin without displaying Forms

I am pretty sure that this can be done - I just can't quite seem to make it happen -
I have a plugin that will create a large number of PDF forms from XML data files.
This process runs currently and it is very useful but since we process a fairly large number of XML data files it can go on for a while and I would like to have it run with a minimum of screen IO or display.
can the plug-in be configured to run silently or nearly silently ?
Thanks

I am not aware of any way to do that.
Paul

How to run a vi without using menu button on top

i got to execute or run the labview program without using the menu button.There should be a button on front panel clicking on to it must run the vi.

Hello, i am also new to labview but i experienced that you can use
a while loop for this.
You need to connect while loop with an boolean button,
so everything which is included within the while loop will start only if
the boolean button is "True".
best regards
Sven Zörner
mitu_patnaik wrote:
> i got to execute or run the labview program without using the menu
> button.There should be a button on front panel clicking on to it must
> run the vi.

How to run c program without xcode

i want to run my c program without using Xcode coz its a huge download,plz help me out I'm new to mac

The Xcode install is worth the time and space (in my opinion). To enable the command line tools you have to also install those:
http://stackoverflow.com/questions/9329243/xcode-4-4-and-later-install-command-l ine-tools
The nice thing about using Xcode is that you will have the debugger and also be able to build executables for other platforms (cross compile) since Xcode allows you to use an external build system.
Here is another option... there are websites that allow you to compile and run code on the server side (through a web interface):
http://ideone.com/jwTjgN

How to run InDesign Javascript without Interruption

Hi all,
I want to run InDesign Javascript, while running the script nobody should interrupt. How to do it???
Thanks in Advance,
Mahesh

[Jongware] wrote:
You might also ask the user to un-plug the keyboard, let the script run, and then plug in the 'board again. (Altho' that might lead to a practical problem: "Remove keyboard, then press any key to continue". I'll leave that to solve for the OP.)

How to run eg. 'make' without sudo?

Similar Messages

Maybe you are looking for