How to run examples

          Can anybody help me in running the examples coming in wl5.1. I am hard time
          figuring the documentation to run the examples.....
          Is there any step by step procedure listed in the doc....
          Thanks,
          sk

          Each example has details on how to run it. There is an HTML file
          included in each examples directory.
          For example, to run the JDBC examples for Oracle, you could start with
          the following page:
          http://www.weblogic.com/docs51/examples/jdbc/oracle/Package-examples.jdbc.oracle.html
          Note that this page is also copied into your examples directory under
          your Weblogic installation.
          Good luck!
          Thanks,
          Michael
          shiva katta wrote:
          >
          > Can anybody help me in running the examples coming in wl5.1. I am hard time
          > figuring the documentation to run the examples.....
          >
          > Is there any step by step procedure listed in the doc....
          >
          > Thanks,
          >
          > sk
          Thanks,
          Michael
          -- BEA WebLogic is hiring!
          Check our website: http://www.bea.com/

Similar Messages

How to run the parameter form example report :pform_report.jsp

how to run the parameter form example report : pform_report.jsp ?
I got these error message:
Reports Error Page
Sat Oct 18 11:58:24 CST 2003
javax.servlet.jsp.JspException: rwlib-1: REP-6106: (, 4 L, XML 1h��/�� ' PI with the name 'xml' can occur only in the beginning of the document.'.
javax.servlet.jsp.JspException: rwlib-1: REP-6106: (, 4 L, XML 1h��/��
PI with the name 'xml' can occur only in the beginning of the document.'.
     at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:180)
     at examples.tools._pform__report._jspService(_pform__report.java:79)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:66)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:539)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:285)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:771)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:152)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:72)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:796)
     at java.lang.Thread.run(Thread.java:484)

repost !
please help!

How to Run the MDK Sample Example Application in SAP NWDS

Hi all,
As i go through the MDK 2.5 i have physically under gone with all option that are included in
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eba3a7-0601-0010-b982-92f1fca3258a
this site and imported the Example 1 Application in nwds, but when try to run it,this application asking to mention some main Class option .
tell me which class should i mention to run the example1 application.
so please help me out of it ,
thanks and Regards,
Venu

hi Venu Gopal,
Welcome to the SDN and Mobile Community.
Pl. check my weblog on this "Execute and Debug Applications from NWDS". /people/arunkumar.ravi/blog/2006/02/22/execute-debug-your-mi-code-from-nwds
I've explained how to run the application from NWDS itself.
Regards
Arunkumar R

How to run ni-daq examples within BorlandC 5.02

The results of compilation and runnig within BorlandC 5.02 IDE are below.
Info :Compiling C:\Program Files\National Instruments\NI-DAQ\Examples\BorlandC\Ai\aionepoint.c
Warn : aionepoint.c(78,2):'iRetVal' is assigned a value that is never used
Warn : aionepoint.c(56,2):'iStatus' is assigned a value that is never used
Info :Linking C:\Program Files\National Instruments\NI-DAQ\Examples\BorlandC\Ai\AIonePoint.exe
Error: Error: Unresolved external 'AI_VRead' referenced from C:\PROGRAM FILES\NATIONAL INSTRUMENTS\NI-DAQ\EXAMPLES\BORLANDC\AI\AIONEPOINT.OBJ
Error: Error: Unresolved external 'NIDAQErrorHandler' referenced from C:\PROGRAM FILES\NATIONAL INSTRUMENTS\NI-DAQ\EXAMPLES\BORLANDC\AI\AIONEPOINT.OBJ

Hello;
There is a good KnowledgeBase at www.ni.com that talks about how to run NI-DAQ examples at Borland. You might want to double check that to see if you are including all the necessary files.
If you go to NI home page and type +ni-daq +example +run +borland, the first result of the search is the link to that KB.
Hope this helps.
Filipe

How to run oracle cm sdk examples in a standalone mode?

I encountered some difficulty on how to run the examples provided by CM SDK Developer's Guide,such as SimpleConnection.I deployed my develop enviroment in two computers,installed only oracle JDeveloper in one computer,while installed Oracle10g,Oracle AS and Oracle CM SDK on the other computer.But when I tried to run the example on the computer which was only installed Oracle JDeveloper,I always failed.I have no idea of how to run the example in a standalone mode.I hope someone who familiar with Oracle CM SDK can help me solve the problem or give me some advice.Now I list the errors which appeared when I ran the example,SimpleConnection.
C:\Oracel JDeveloper904\jdk\bin\javaw.exe -ojvm -classpath C:\Oracel JDeveloper904\jdev\mywork\Workspace2\Project1\classes;C:\Oracel JDeveloper904\jdev\lib\jdev-rt.jar;C:\ias\cmsdk.jar;C:\ias\uix2.jar;C:\ias\classes12.jar;C:\ias\emPid.jar -DIFS.DOMAIN.Name=ifs://zhao:1521:zyh:IFSSYS -DIFS.STANDALONE.Mode=true -DIFS.SCHEMA.PASSWORD=manage oracle.ifs.examples.devdoc.connection.SimpleConnection
Connecting...
oracle.ifs.common.IfsException: IFS-20102: Unable to start service (IfsDefaultService)
oracle.ifs.common.IfsException: IFS-20010: Unable to get service configuration properties (SmallServiceConfiguration)
java.sql.SQLException: Io Òì³£: The Network Adapter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:231)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:345)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:431)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:515)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:345)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.ifs.beans.LibraryService.getServiceConfigurationProperties(LibraryService.java:618)
at oracle.ifs.beans.LibraryService.getServiceConfigurationProperties(LibraryService.java:503)
at oracle.ifs.beans.LibraryService.startService(LibraryService.java:366)
at oracle.ifs.examples.devdoc.connection.SimpleConnection.main(SimpleConnection.java:17)
Process exited with exit code 0.

The CMSDK uses the oci8 interface to connect to the database. The classes12.jar file has to correspond to the appropriate ocijdbc9.dll file; and the ocijdbc9.dll file is dependent on about 26 other DLLs beginning with oci*.dll and ora*.dll.
I've found that the 10.1.0 and 9.2.0 database client releases contain the wrong oci*.dll family (at least for JDeveloper) and I use the 9.0.4 AS Client tree in my path when I work with CMSDK.
My quick test is to see if I can connect to my database using JDeveloper Connect DBMS with the oci8 connection method. This seems to put out some reasonable error messages explaining why it failed, e.g. it tells you that it couldn't find the right DLL dependency.

How to run the form that is only installed on a PC and not using a server?

Hi
I am new to Oracle and have taken the forms class. But I do not understand how to run the form from my PC using XP windows. (Do not have access to a server).
I have started the OC4J, made sure the listener was started, compiled the form and then when I run it, it automatically goes to the HTTP:
ERROR: res://ieframe.dll/acr_depnx_error.htm#,http://kevin:8889/forms/frmservle
I connected to the database correctly. I can process a report and it does nor try to access the internet. My only issue is running the form. I verified it compiled.
Sorry for a basic question. Could someone please help, I tried reviewing other questions, but not sure if they are connecting to a server or not.
I see webutil but is it required if I don't have a server? Thank you in advance.

Regardless of the version, it appears that you may not have configured the Builder. Do the following:
1. Open the Builder
2. From the menu, select Edit > Preferences > Runtime
3. In the box labeled "Application Server URL:", enter a local URL needed to run a form OR click the button labeled "Reset to Default". If you decide to manually enter a value, it would looks something like this:
http://localhost:8889/forms/frmservlet
4. In the field labeled "Web Browser Location:", enter the path and executable to your preferred browser. So for example if IE is your browser of choice the entry would most likely look like this:
C:\Program Files\Internet Explorer\IEXPLORE.EXE
5. Click on OK and retest.
By the way, you can manually enter a URL in the browser. Clicking the RunForm button from the Builder is strictly optional. To run the "test" form directly from the browser enter the following into the browser's address field:
http://localhost:8889/forms/frmservlet?form=test
More information about Forms can be found on OTN:
http://www.oracle.com/technology/products/forms/index.html

How to run a job in background programatically after 10 sec

Hi Forum,
Can anyone tell me How to run a job in background programatically after 10 sec..
Thanks in advance

Hi,
Here is the example code
*Submit report as job(i.e. in background)
data: jobname like tbtcjob-jobname value
                             ' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
      host like msxxlist-host.
data: begin of starttime.
        include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
* Job open
call function 'JOB_OPEN'
       exporting
            delanfrep        = ' '
            jobgroup         = ' '
            jobname          = jobname
            sdlstrtdt        = sy-datum    " You need to give the Date for execution the Job
            sdlstrttm        = sy-uzeit    " You need to give the Time for execution the Job
       importing
            jobcount         = jobcount
       exceptions
            cant_create_job = 01
            invalid_job_data = 02
            jobname_missing = 03.
if sy-subrc ne 0.
                                       "error processing
endif.
* Insert process into job
SUBMIT zreport and return
                with p_param1 = 'value'
                with p_param2 = 'value'
                user sy-uname
                via job jobname
                number jobcount.
if sy-subrc > 0.
                                       "error processing
endif.
* Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
       exporting
            event_id             = starttime-eventid
            event_param          = starttime-eventparm
            event_periodic       = starttime-periodic
            jobcount             = jobcount
            jobname              = jobname
            laststrtdt           = starttime-laststrtdt
            laststrttm           = starttime-laststrttm
            prddays              = 1
            prdhours             = 0
            prdmins              = 0
            prdmonths            = 0
            prdweeks             = 0
            sdlstrtdt            = starttime-sdlstrtdt
            sdlstrttm            = starttime-sdlstrttm
            strtimmed            = starttimeimmediate
            targetsystem         = host
       exceptions
            cant_start_immediate = 01
            invalid_startdate    = 02
            jobname_missing      = 03
            job_close_failed     = 04
            job_nosteps          = 05
            job_notex            = 06
            lock_failed          = 07
            others               = 99.
if sy-subrc eq 0.
                                       "error processing
endif.
Regards
Sudheer

How to run a stored procedure in TOAD 9.0

Dear Friends,
I am using TOAD 9.0 .
Running a procedure but getting the error ..
create or replace PROCEDURE UPD_TBL(I_table_name IN VARCHAR2) IS
CURSOR c_columns is select column_name from ALL_TAB_COLUMNS where
TABLE_NAME = I_table_name;
BEGIN
FOR rec in c_columns
LOOP
IF ( rec.COLUMN_NAME = 'X_NNM_TYPE_CD' ) THEN
UPDATE I_table_name set X_NNM_TYPE_CD = REPLACE (X_NNM_TYPE_CD, '-', '_')
WHERE INSTR (X_NNM_TYPE_CD, '-') > 0 ;
ELSIF ( rec.COLUMN_NAME = 'X_REVENUE_TYPE_CD' ) THEN
UPDATE I_table_name set X_REVENUE_TYPE_CD = REPLACE (X_REVENUE_TYPE_CD, '-', '_')
WHERE INSTR (X_REVENUE_TYPE_CD, '-') > 0 ;
END IF;
END LOOP;
EXCEPTION
when OTHERS then
NULL;
END UPD_TBL;
ERROR: TABLE OR VIEW DOES NOT EXIST.
Please let me know how to run the procedure in toad.
thanks/kumar

Kumar,
At a minimum, you would need to remove both the exception handler in your procedure and the exception handler in your anonymous block. As has been mentioned before, the code
EXCEPTION
WHEN OTHERS THEN
    NULL;
END;is almost always a bug. In your case, your code is almost certainly generating an exception and your exception handler is silently catching and ignoring that exception. If you care whether or not any rows are updated, that is a bug.
Once you remove the exception handlers, you'll very likely discover that the SQL statements you are generating and executing dynamically are malformed. Off the top of my head, it would appear that there is no space between the table name and the SET keyword in the string you are constructing. That means that if I_TABLE_NAME is 'EMP', for example, you'd construct a statement like
UPDATE empSET x_nnm_typ_cd = ...'Oracle would interpret empSET as the table name, it would interpret X_NNM_TYP_CD as a table alias, and then it would encounter the equals sign unexpectedly and generate a syntax error. You'd need to insert a space after the table name and before the SET keyword (note where folks inserted extra spaces in their sample code).
In general, you are probably better served by having a local variable that you use to build up the SQL statement. That way, you can print (or log) the SQL statement that is constructed. When you encounter a syntax error at runtime, that will generally make debugging easier. So you'd probably want something like
l_sql_stmt VARCHAR2(1000);
BEGIN
FOR rec IN cur_c_columns LOOP
    IF (rec.column_name = 'X_NNM_TYPE_CD') THEN
      l_sql_stmt :=
         'UPDATE '||i_table_name||
         ' SET x_nnm_type_cd = REPLACE(x_nnm_type_cd, ''-'', ''_'')'||
         'WHERE INSTR(x_nnm_type_cd, ''-'') > 0';
      dbms_output.put_line( l_sql_stmt );
      EXECUTE IMMEDIATE l_sql_stmt;
...When you get a syntax error, you can then take a look at the SQL statement that was generated and debug the problem more easily.
Justin

How to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller

we are using VS 2013, I need to run multiple Coded UI Ordered Tests in parallel on different agents.
My requirement :
Example: I have 40 Coded UI Test scripts in single solution/project. i want to run in different OS environments(example 5 OS ). I have created 5 Ordered tests with the same 40 test cases.
I have one Controller machine and 5 test agent machines. Now I want my tests to be distributed in a way that every agent gets 1 Ordered test to execute.
Machine_C = Controller (Controls Machine_1,2,3,4,5)
Machine_1 = Test Agent 1 (Should execute Ordered Test 1 (ex: OS - WIN 7) )
Machine_2 = Test Agent 2 (Should execute Ordered Test 2 (ex:
OS - WIN 8) )
Machine_3 = Test Agent 3 (Should execute Ordered Test 3
(ex: OS - WIN 2008 server) )
Machine_4 = Test Agent 4 (Should execute Ordered Test 4 (ex:
OS - WIN 2012 server) )
Machine_5 = Test Agent 5 (Should execute Ordered Test 5 (ex:
OS - WIN 2003 server) )
I have changed the “MinimumTestsPerAgent” app setting value
as '1' in controller’s configuration file (QTController.exe.config).
When I run the Ordered tests from the test explorer all Test agent running with each Ordered test and showing the status as running. but with in the 5 Test Agents only 2 Agents executing the test cases remaining all 3 agents not executing the test cases but
status showing as 'running' still for long time (exp: More then 3 hr) after that all so its not responding.
I need to know how I can configure my controller or how I can tell it to execute these tests in parallel on different test agents. This will help me reducing the script execution time.
I am not sure what steps I am missing.
It will be of great help if someone can guide me how this can be achieved.
-- > One more thing Can I Run one Coded UI Ordered Test on One Specific Test Agent?
ex: Need to run ordered Test 1 in Win 7 OS (Test Agent 1) only.
Thanks in Advance.

Hi Divakar,
Thank you for posting in MSDN forum.
As far as I know, we cannot specify coded UI ordered test run on specific test agent. And it is mainly that test controller determine which coded UI ordered test assign to which test agent.
Generally, I know that if we want to run multiple CodedUI Ordered Tests over multiple Test Agents for parallel execution using Test Controller.
We will need to change the MinimumTestsPerAgent property to 1 in the test controller configuration file (QTControllerConfig.exe.config) as you said.
And then we will need to change the bucketSize number of tests/number of machines in the test settings.
For more information about how to set this bucketSize value, please refer the following blog.
http://blogs.msdn.com/b/aseemb/archive/2010/08/11/how-to-run-automated-tests-on-different-machines-in-parallel.aspx
You can refer this Jack's suggestion to run your coded UI ordered test in lab Environment or load test.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/661e73da-5a08-4c9b-8e5a-fc08c5962783/run-different-codedui-tests-simultaneously-on-different-test-agents-from-a-single-test-controller?forum=vstest
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

URGENT: How to run threads in sequence?

Dear experts, I am new to writing threads. I would like to know how to run threads in sequence? How do I know when a thread finishes its task?
In the following code, classes Process_A(), Process_B(), Process_C() and Process_D() are subclasses of Class Thread.
I'd like to know if I am using the join() function correctly? My intention is to wait for the previous process to finish before running the current process.
Could anyone kindly give me some solutions on how to run the processes in sequence?
Thanks!!
=============================================================
Thread process;
Vector process_names = new Vector();
process_names.add("a");
process_names.add("b");
process_names.add("c");
for(int i=0; i<process_names.size(); i++)
String process_name = (String) process_names.elementAt(i);
if(process_name.equals("a"))
process = new Process_A();
else if(process_name.equals("b"))
process = new Process_B();
else if(process_name.equals("c"))
process = new Process_C();
else if(process_name.equals("d"))
process = new Process_D();
timer = new javax.swing.Timer(1000, new ProcessListener());
timer.start();
// ProcessListener()
class ProcessListener implements ActionListener {
public void actionPerformed(ActionEvent evt) {
if(process!=null)
if(process.isAlive())
try
process.join();
catch(Exception ex)
ex.printStackTrace();
process.start();

just look at this simple example u will get to know how to use join method
This does exactly what u want
class callme
void call(String msg)
System.out.println("["+msg);
Try
Thread.sleep(1000);
catch(InterruptedException e)
System.out.println("interrupted");
System.out.println("]");
class caller implements Runnable
String msg;
Callme target;
Thread t;
Public Caller(Callme targ, String s)
target=targ;
msg=s;
t=new Thread(this);
t.start();
public void run()
target.call9msg);
class Synch
public static void main(String arg[])
Callme target=new Callme();
Caller ob1=new Caller(target,"hello");
Caller ob2=new Caller(target,"Synchronized");
Caller ob3=new Caller(target,"world");
Try
ob1.t.join();
ob2.t.join();
ob3.t.join();
catch(InterruptedException e)
System.out.println("interrupted");
waiting for dukes

Best way to port all Windows XP files, applicaitons and data form my PC over to iMac and how to run those Windows apps on Mac?ns on Mac?

I have a Windows XP machine with apps, files and data. I want to get all that over to my Mac, and also run those apps under Windows XP or even Windows 7 on my Mac. Im wondering:
1. How best to get those files over to my Mac
2. How to run those apps and use my Windows based files/data on my Mac
3. How best to run Windows on my Mac....either partitiion my Mac's hard drive and boot up either Windows or MAC OS, or run some other program where I can easily switch back and forth form Windows to MAC OS, or perhaps get it all on an external hard drive, maybe partition that Windows/MAC OS and boot from that?
Thanks!

I agree you would benefit by using virtualizaiton software. Virtual Box is one alternative the commercial apps for doing virtualization are Parallels and VMWare Fusion which you also might be interested in for their support and updates.
Also you may benefit by book marking and using:
Mac 101 , Switch 101 & Find Out How Video tutorials
For your MS Office apps then I'd STRONGLY recommend using the native Office For Mac versions, you can find these on Amazon for less than $100 and then you can run the apps natively rather than having to lean on MS Windows. Also for your Financial and Tax software you also may want to use OS X apps too, for example I used Quicken for over 20 years (PC mostly and some Mac) but switched to iBank. Also for tax software I have used Quicken's Turbo Tax, this also runs natively on OS X.
In other words for your stated needs I don't see much reason to stay with MS Windows. You may have other considerations, if you do please state them, some may be real issues and some may be easily overcome.

How to run automatic payment program business area wise

dear all
please let me know how to run automtic payment program business area wise.
for example business area 2020 we want to make payment business area wise.
what are the back gorund settings for congigration Tc- fbzp
wht are the configrations forTC- f110
regards
babu

Hi,
You can make payments business area wise if you had ticked payment goup business area wise in the payment method in company code screen. However you will have to give company codes in the payment parametets, but payments will be grouped by business area.
Thanks,
Ramesh.

How to run long background jobs in ADF applications

Hi,
I'm looking for some guidance on how to run an asynchronous job within an ADF application with proper progress notification in the current page.
Let's assume we have some long running task (e.g. generating notification emails from a bunch of rows in my view object and send them) with the corresponding classes implemented in the DataModel as part of the business logic (e.g. a class that sends a mail to a given recipient).
Let's assume all the relevant methods can be exposed in the appmodule's client interface so they can be invoked from the ViewController if needed.
In my jspx page I have implemented the standard af:poll+af:progressIndicator mechanism to give feedback about the running task, backed by a custom BoundedRangeModel
with methods getValue() and getMaximum(). This works.
However, all the examples I've found on the net are very very simplistic and only deal with simple counters or countdowns.
But how to actually implement the whole mechanism in a real life scenario? How do I run the job itself and make it give feedback to my BoundedRangeModel class
(which in turn is used by the progressIndicator on the page)?
Is there a recommended way to do this within ADF apps? I've tried to search something about asynchronous method execution in ADF but there seems to be nothing out there.
Do I need to use standard Java techniques such as a separate Thread running a Runnable worker? Should I use an observer/observable pattern to notify BoundedRangeModel
and update its internal variables (current value and maximum)? Would this work across a Datacontrol interface?
Is anything of this allowed within the ADF framework or I'm just gonna break the whole framework model because do-it-yourself concurrent programming isn't allowed in a multithreaded pooled environment?
Some explanation about the current recommended best practices and/or some practical examples or articles about that would be great.
(BTW: I'm using version 11.1.1.2.0 and yes, I've checked the contextual events thing too, but that's just an inter-page communication mechanism so it has has nothing to do with what I need to do.)

Hi
I have implement a "Runner" class to generate a pdf to every customer of a mailmerge file, which was uploaded. Its simply easy to do something like this. Just add a button, bound the button with a methode out of you applicationModule and start your implementing Thread in this methode.
public class Runner implements Runnable {
    private String docFileName;
    private String csvFileName;
    private byte[] csvData;
    private byte[] docData;
    private FtpClient client;
    private String category;
    public Runner(String category, String docFileName, byte[] docData,
                  String csvFileName, byte[] csvData, FtpClient client) {
        this.category = category;
        this.docFileName = docFileName;
        this.docData = docData;
        this.csvFileName = csvFileName;
        this.csvData = csvData;
        this.client = client;
    public void run() {
}In your applicationModule, you can start your Runner like this:
        Runner runner =
            new Runner(category, docFileName, docData, csvFileName, csvData, client);
        new Thread(runner).start();And to the problem with your progressBar. I would create a managedBean with a HashMap<String, HashMap<String, String>>. Every thread you start, add a HashMap<String, String> to this hashmap with the id of the username/session/whatever (must be bound to the user, which starts the thread). This added HashMap<String, String> should be used by your thread to put some status-information into. Now you can try to bind this info to your progressBar.
I dont know if this will work, it is just an idea ;-)
Regards
Majo

How to run stored procedure in run-time not in design

hello:
I have download the ODT software
and i installed VS 2003 environment
amd i have oracle 9i on the server and oralce client on my computer
and I know how to run the ODT inside the VS2003 and how to use it
I built a package and inside it a procedure that does not take any parameter
PROCEDURE "TEST1" IS
BEGIN
insert into emp (empno,ename)
values (3003,'jon');
END "TEST1";
this procedure is valid and I can run it in ODT (by right click over the procedure name and select "Run")
but when I drag it and drop this procedure on a form in application I have a dialog with errors that's not understandable
for example:
ORA-06550: line 1, column 27
PLS-00315: PL/SQL TABLE Declarations must currently use binary_integer indexes
and many other errors
ok I want to know how I can call the procedure in the code and give to it the in parameters and then get the out parameters
I hope to find replay
thank you

Hi,
You have to take care of certain measures other thatn just drag and drop the Oracle procedure to the .NET form.
Following is a simple code to call an Oracle procedure from the C#.Net form
============================================================
using System;
using System.Collections;
using System.ComponentModel;
using System.Drawing;
using System.Web;
using System.Web.SessionState;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.HtmlControls;
using System.Data;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
namespace TEST1
     public class CallingProcs : System.Web.UI.Page
          protected System.Web.UI.WebControls.Button Button1;
          protected System.Web.UI.WebControls.TextBox txtYear;
          OracleConnection conn;
          private void Page_Load(object sender, System.EventArgs e)
               // Put user code to initialize the page here
               string oradb = "Data Source=ORA1;User Id=SCOTT;Password=TIGER;";
conn = new OracleConnection(oradb);
               conn.Open();
          #region Web Form Designer generated code
          override protected void OnInit(EventArgs e)
               // CODEGEN: This call is required by the ASP.NET Web Form Designer.
               InitializeComponent();
               base.OnInit(e);
          /// <summary>
          /// Required method for Designer support - do not modify
          /// the contents of this method with the code editor.
          /// </summary>
          private void InitializeComponent()
               this.Button1.Click += new System.EventHandler(this.Button1_Click);
               this.Load += new System.EventHandler(this.Page_Load);
          #endregion
          private void Button1_Click(object sender, System.EventArgs e)
               //OracleCommand dbcmd = new OracleCommand();
               OracleCommand dbcmd = conn.CreateCommand ();
               dbcmd.CommandType = CommandType.StoredProcedure;
               dbcmd.CommandText = "TEST1";
               try
                    dbcmd.ExecuteNonQuery ();
                    Response.Write("Excecuted succesfully");
               catch(Exception ex)
                    Response.Write(ex.Message);
============================================================
Most of the above code is generated automatically. I am using Visual Studio .NET 2003 , C# for it.
The design view of the form contains a button named 'Button1' and the code is aimed to call the procedure 'TEST1' on clicking the button.
Hope this will give you a start to using oracle from .NET

How to run TagLibrary program

Hi frnds,
i am working on Jsp Tag Small example ..I wrote one JSP file,One .tld file and one .java files .That java file is compiled properly.While running that program i am getting error as below:
1..org.apache.jasper.JasperException: /Date.jsp(7,7) Unable to load tag handler class "tagexamples.PageVisitTag" for tag "test:pageVisit"
Here with i sent my File Structure and Source file also :
1.Date.jsp
<%@ page language="java" import ="java.util.Date" %>
<%@ page import="tagexamples.*" %>.
<html>
<title>Simple Date Tag</title>
     <body>
          <%@ taglib uri="/pageVisit.tld" prefix ="test" %>
          <h2> <test:pageVisit /></h2>
          <h2> Current System Date is <%= new Date().toString() %></h2>
     </body>
</html>
2.pageVisit.tld
<?xml version="1.0" encoding ="ISO-8859-1" ?>
<!DOCTYPE taglib PUBLIC "=//Sun.Microsystems,Inc.//DTD Jsp Tag Library 1.1//EN"
          "http://java.sun.com/j2ee/dtds/web-jsptaglibrary_1_1.dtd">
<taglib>
     <tlibversion>1.0</tlibversion>
     <jspversion>1.1</jspversion>
     <shortname>date</shortname>
     <info>
          A simple tag Library for example
     </info>
     <tag>
          <name>pageVisit</name>
          <tagclass>tagexamples.PageVisitTag</tagclass>
          <bodycontent>empty</bodycontent>
          <info>
               This tag Output the LastTime u have viisted the page in the Last MOnth..
               This tag Ocntains empty Body and no attributes
          </info>
     </tag>
</taglib>
3.PageVisitTag.java
package tagexamples;
import javax.servlet.http.*;
import javax.servlet.jsp.*;
import javax.servlet.jsp.tagext.*;
import java.util.Date;
import java.io.IOException;
public class PageVisitTag extends TagSupport
     public int doStartTag() throws JspTagException
          Cookie info = null;
          String msg = "This is the First time u have Visited this page" ;
          //Get all Cookine s that Came from the Request
          Cookie[] cookies = ((HttpServletRequest)pageContext.getRequest()).getCookies();
          for (int i=0;i< cookies.length;i++)
               info = cookies;
               if(info.getName().equals("MyCookie"))
                    found = true;
                    break;
          }//for
          String newValue =""+System.currentTimeMillis();
          if(!found)
               //Create a new Cookie and set its age
               info = new Cookie ("MyCookie",newValue);
               info.setMaxAge(60*1);
               info.setPath("/");
               ((HttpServletResponse)pageContext.getResponse()).addCookie(info);
          }else {
               long conv = new Long(info.getValue()).longValue();
               msg = "U Last visited this site on "+new Date(conv);
               //Set the new value of the Cookie and adddd it to the Response
               info.setValue(newValue);
               info.setMaxAge(10*24*60*60); //keep the cookie for One Month
               //Set the Path so that the Cookie is available everywhere on the Server
               info.setPath("/");
               ((HttpServletResponse)pageContext.getResponse()).addCookie(info);
          } //else
          try{
               JspWriter out = pageContext.getOut();
               out.write(msg);
               }catch(IOException e){
                    throw new JspTagException("JspWriter not There :"+e);
               return SKIP_BODY;
     }//doStartTag ends
     public int doEndTag() throws JspTagException {
          if(!found){
               //Don't Compare current and Cookie time this time
               return SKIP_PAGE;
          }else {
               return EVAL_PAGE;
     }//doEnd Tag ends
          boolean found = false;
     } //Class ends
while running the above files in Tomcat it giving above error:
i am running by:
http://localhost/TagExamples/Date.jsp
and
I kept files in the below Structre order.
My file Structure is :
D:\jakarta-tomcat-5.0.16\webapps\TagExamples\WEB-INF\classess\tagexamples\PageVisitTag.java
D:\jakarta-tomcat-5.0.16\webapps\TagExamples\Date.jsp
D:\jakarta-tomcat-5.0.16\webapps\TagExamples\pageVisit.tld
Just tell me is it Correct ..? and what is the Problem in COding and how to run a Tag Library
If anybody know the Solution just reply .send me the mail
[email protected]
with regards,
Ramesh P
98459 35822

Do (dir if on windows, ls if on *nix) and you will probably see an A directory in the A directory. That came from your last compilation attempt. Remove it and everything in it. Now,
cd ..
javac A/Convertible.java
java A.Convertible

How to run examples

Similar Messages

Maybe you are looking for