How to run FSG with ADI..

Hi
Can any one guide me how to run FSG with ADI..?
regards
Ahsan

Pl post details of OS, database and EBS versions. Pl see if MOS Doc 131505.1(The Beauty of FSG in ADI) can help.
More information will be present in the manuals for your Apps release at http://www.oracle.com/technetwork/documentation/applications-167706.html
HTH
Srini

Similar Messages

How to run applications with options in IDEs like Netbeans

Hi, I'm new to the Netbeans IDE and I'm wondering how to run applications with options.
Normally I'd enter the following in the command line:
java -Djavax.net.ssl.keyStore=mykeystore -Djavax.net.ssl.keyStorePassword="..." TLSServer
java -Djavax.net.ssl.trustStore=mytruststore -Djavax.net.ssl.trustStorePassword="..." TLSClient localhostProblem is, I've no idea how to do the same thing in IDE's like Netbeans and I can't any settings to add options like "-Djavax.net.ssl.keyStore=mykeystore" before running the application. Any help will be appreciated.
Message was edited by:
Wolfgard

Right-click the project, click properties, clicl run, and add parameters to VM Options.

How to run etherape with ordinary user?

hi
when run etherape show this massege:
No capture device found or insufficient privileges.
Only file replay will be available.
EtherApe must be run with administrative privileges (e.g. root) to enable live capture.
Pcap error: no suitable device found
i create group etherape with this ownership
┌─[root@mymind] - [/etc] - [Sat Feb 04, 12:02]
└─[$] <> groupadd etherape
┌─[root@mymind] - [/etc] - [Sat Feb 04, 12:02]
└─[$] <> chgrp etherape /usr/bin/etherape
and add my user to this groups
┌─[root@mymind] - [/etc] - [Sat Feb 04, 12:02]
└─[$] <> usermod -G root,network,http,mysql,dbus,mem,bin,daemon,gdm,audio,video,rfkill,wheel,disk,sys,etherape mostafa
how to run etherape with ordinary user(without root privilege)?
Last edited by mostafasedaghat (2012-02-03 20:37:44)

mostafasedaghat wrote:how to run etherape with ordinary user(without root privilege)?
You can't. It requires root to set network card attributes, which can only be set with administrative priviledges. But it should be no problem to start it with sudo.

How to run tasks with priority?

Hello everyone,
I want to run tasks with priority, i.e. among several simultaneous running tasks, the task with the higher priority will have more chances to occupy CPU time. I have the following 2 issues dealing with the implementation of such feature.
- To define each task as a thread or as a method? How to change the priority of each task dynamically when they are running?
- The priority feature of Java thread does not meet my requirement, since I can not define priority precisely. For example, I want to define that a task with priority A will occupy CPU time 3 times than a task with priority B.
I am wondering whether I can find similar open source projects or tutorials?
Thanks in advance,
George

how to run autoconfig with out effecting database
or
which mode i have to run What do you mean by not affecting the database?
The database and the database listener should be up and running when you run AutoConfig on the Application/Database tier nodes.
Please see (Autoconfig FAQ [ID 218089.1]) -- Which files / profile options get changed when I run AutoConfig?
Thanks,
Hussein

How to run servlet with tomcat

I have a probrom that how can I run servlet with tomcat?
I have new a folder classes in webapps\root\WEB-INF\,and put the .class
programme in it ,but http://localhost:8080/servlet/HelloWorldExample
can't run ,it give me a error than http:404 not found.
could you tell me how i can solve the problem.
Thank u very much.

Hi,
Make sure the class is in classpath or in WEB-INF/classes folder and make an entry for servlet tag in web.xml in WEB-INF folder.
Regards

JDB: How to run jdb with sun.* classes.

I'm attempting to run jdb and step through various classes in sun.*. I run jdb with the sourcepath set to the unzipped contents of the Sun Community License source code that I downloaded (jdb and source code version 1.3.1). However, every time I get to an internal Java API call, the "step" method skips over the call. I can do a "stop in" by specifying the particular internal Java method that I want to stop in and "list" will show me the Java code (which means that it is seeing the Java source). However, typing "step" at this point runs to the end of any of the Java internal methods and back to my own code.
Is there a way that I can instruct the debugger that I really want to step into the Java internal classes?
Thanks,
Kevin Regan
[email protected]

Oh yeah, I'm hoping for my first Duke Dollars!
You must issue an "exclude none" command to jdb
to be able to trace sun.*
In fact if you type "exclude" you can see that
java.*,javax.*,sun.*,com.sun.*
are excluded from steping by default in jdb(1.4.x)
-Cameron Elliott
[email protected]

I need a PPT for user how to run reports with perfomance

Hai BW guys...
For our end-users we need one slide that gives them some hints/tips on how they should run the reports for best performance (e.g. extract as few records as possible).
I know there is some SAP material in relation to this on sdn.sap.com. Could you make me a slide with some hint and tips for fastest report execution for end-users ?
Plz help me out

Hi
Check the following links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/828d9590-0201-0010-95a7-ea8cf8814b94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ec20a990-0201-0010-f291-d1d039975e41
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a249a990-0201-0010-e18e-b2f5ed135497
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bc4fa990-0201-0010-588e-ca4e63050d6d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b931a890-0201-0010-268d-a7bedf8aa720
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f0aca990-0201-0010-0380-f3aac4127a57
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3541a990-0201-0010-f1ae-b24b72690df7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2642ab90-0201-0010-9193-d59de66cbab4
http://searchsap.techtarget.com/searchSAP/downloads/chapter-august.pdf
http://searchsap.techtarget.com/featuredTopic/0,290042,sid21_gci1121728,00.html?bucket=REF
It will be useful to prepare your endusers
Regards
Ganesh N

How to run portal with business intelligence installation?

i have a system suse linux enterprise edition 7.3. and my hardware is p4 cpu 1 gb memory and 80 gb hdd.
i installed oracle9ias r2(9.0.2) . my installation is "business intelligence".but my aim is to run oracle9iportal."
my directory structure is
/opt/oracle/infrastructure
/opt/oracle/applicationserver
/opt/oracle/appserver
one infrastructure and two applicationserver on one host.
i read the Oracle9i Application Server Administrator's Guide
Release 2 (9.0.2)
i have some questions
1-You can install multiple application server installations and infrastructures on the same host. Each must have its own Oracle home.
if so why do i need to change all times "@ORACLE_HOME" path according to others.? is there another solution
2-which steps do i follow to run portal?
3-must i run infrastructure structure before starting application server ?
best regards
1-

Hi Dharani,
Please check this thread.
How will do the connectivity with SAP and Non Sap System
Also ensure you avoid cross-posting. This has been mentioned to you multiple times earlier.
Cheers,
Sandeep Tudumu

How to run report with selected data in form?

Hi,
Imagine I have a form with a Data block with this inside :
Code | Name
1 | Product1
2 | Product2
I want to run a report that will only select these 2 records from the table "product".
I manage to run a report from forms, but it's a pre-defiined report that will always display the same things. (all the table)
Maybe it's with the paramlist, would you have an exemple or tutorial about that?
Edit : When I create the report object in the form, I can give the source Data Block, but how to use in the report Data Model?
Edited by: Danicela on 24 avr. 2009 10:41

One way to achieve this is to use a "temporary" ID-table.
Create a table with just two columns RUN_ID and ID
Then, in forms before starting the report, create a new RUN_ID, e.g. by using a sequence and then, for every record in your block, create a record with the RUN_ID and the record's PK-column-value, in your case this might look like
RUN_ID ID
4711     1
4711     2Commit that data in Forms (e.g. with using an autonomous transaction).
Now, pass the RUN_ID as a parameter to the report, and in reports, restrict your query like
SELECT ..
FROM YOURTABLE
WHERE ID IN (SELECT ID
                FROM ID_TABLE
               WHERE RUN_ID=:PARAM_RUN_ID
             )To be clean, delete the data with the run_id in the AFTER-REPORT-trigger of the report.

How to run procedure(with paramater other than errbuff and retcode) through

Hi everybody,
This is Ram. I'm comfortable while running a procedure through concurrent program. but getting error when trying to run a procedure with parameter. Plz let me know the process (if possible example) of running a pl/sql procedure(with parameter) through concurrent programs..
Regards,
Ram.

Hi
It's difficult to know exactly what to modify to have no errors as those are not specified. However, the rule of thumb is for a procedure to be used as a concurrent program:
procedure conc_prog(
errbuf out varchar2
, retcode out varchar2
, param1 in varchar2 -- all additional parameters must by of IN type
, paramn in varhcar2 ) ;
On the concurrent program definition form, add the parameters from the third one, errbuf and retcode don't neet to be defined. Be careful on datatypes as date an numbers may have format mask problems when passed to your procedure and more possibility for this to happen is more than one language is installed. A safe way to pass those values would be to define parameters as varhchar2 and in your code, define a variable of the right type to use and assign the received value with the format mask defined for the value set associated to the parameter.

How to run programs with older version (windows 98)

I purchased a software that runs on WINDOWS 98 system..VIRTUAL DJ SOFTWARE..BUT, I cannot run it on my system, which is: WINDOWS 7..HP Notebook G72B54NR..MY QUESTION: "IS THERE A WAY FOR ME TO ALLOW MY HP NOTEBOOK TO ALLOW THIS OLDER VERSION TO OPERATE ON MY WINDOWS 7 SYSTEM"?

Do you recieve any kind of error message when trying to run it?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to run IE with administrator privileges on limited user account?

Hello,
I have a domain user who needs to access a certain web application on the internet using IE and to do so we have to add this website to IE Trusted Sites Zone and also allow Pop-ups, the issue now is that the domain user has a limited account on this PC (Windows
8.1) and changing these settings is not available. I only have (General-Connections-Programs) taps available under IE Internet Options for this user.

web application is not working just like before. Did i miss something?
Not necessarily. Some users have a problem with security packages which are "protecting" their registry. Also, during a beta I discovered that elevation of the Internet Options dialog and trying to do a RIES had resulted in the
Administrator's Profile being nuked, not the one that was being targeted. Perhaps you are seeing a symptom from something like that?
FWIW I would run ProcMon to find out what is going on. It would be best if you had two cases, one which worked and one which was the problem case. Then you could save both traces as .PML files and open them later to compare them in two separate
ProcMon tasks. That way you can just filter coarsely to find a significant divergence in the two traces and then refine your analysis from there. Otherwise, if you don't have a clear hypothesis to test or know exactly what you are looking for you
could try using the Category Is Write filter. That would show changes which were being done in both the Registry and File system.
Good luck
Robert Aldwinckle

How to run terminal with different locales than system default?

I use fi_FI,UTF-8 as default, and I want have one window in tmux that would use iso-8859-1. If I type command "export LANG="fi_FI.iso88591"" in term, it won't change or atleast doesn't work properly. But if I start new instance of xterm (or other terminal) from this term, locales work correctly there. If I take utf-8 support off from tmux it makes the problem little bit different. It will show scandinavian alphabets (å, ö, ä) correctly but adds futile space after letter. I tried to fiddle with .bashrc, but it didn't get me any further either.

hadrons123 wrote:
wunjo wrote:I use fi_FI,UTF-8 as default, and I want have one window in tmux that would use iso-8859-1. If I type command "export LANG="fi_FI.iso88591"" in term, it won't change or atleast doesn't work properly. But if I start new instance of xterm (or other terminal) from this term, locales work correctly there. If I take utf-8 support off from tmux it makes the problem little bit different. It will show scandinavian alphabets (å, ö, ä) correctly but adds futile space after letter. I tried to fiddle with .bashrc, but it didn't get me any further either.
I don't think the command is i right.
see the wiki for setting locale
https://wiki.archlinux.org/index.php/Locale
I don't understand what could be wrong here? fi_FI.iso88591 is how it is typed when I write "locale -a"
C
POSIX
en_US
en_US.iso88591
en_US.utf8
fi_FI
fi_FI.iso88591
fi_FI.iso885915@euro
fi_FI.utf8
fi_FI@euro
finnish
and it doesn't have any difference is it in "" or not, and yes according to your link I should be use LANG variable

How to Run MRP with requirement Plan Number

Dear all,
I am working for the process of MRP Run .But customer requirement is that "To Run the MRP with requirement Plan Number"
If you are aware of this scenario ,please provide the solution.
Thanksin Advance

Go to MD61
Select the Radio Button Rqt Plan Number
Write the plan number eg. "test1"
now you get the next screen
Here you can enter the materials like
first line Testmat1 -qty 100 150 ....
2nd line Testmat2 -qty 150 100
like that
So the difference between MD61 with Material and Rqt Plan number is
Material means we give requirement for only one material
But for Requirment plan number , w.r.t one Rqt Plan number we can maintain requirement for multiple material
same material with same period we can maintain requitement for Different Requirement Plan number
This is reducing effort of client of data entry and for different sales Regions for the same material through "Rqt Plan No" they can differentiate the rqt
MRP run run it for PLANT or multiple plant with Scope of Planning
thanks
Pl award points if useful
K.Prabakaran

How to run rman with cron under RHEL3?

I am exhausted with all my options and knowledge with this. Tried 2 days with all possibilities, but failed. I have a Oracle 10g r2 (10.2.0.2) on a RHEL3 box. I wrote an orabackup.sh file as
rman target sys/pw@backup nocatalog <<EOF
run
{ backup as backupset incremental level 1 cumulative device type disk tag 'Thu_full_bkup%LEVEL_1' database;
recover copy of database;
backup device type disk tag 'Thu_full_bkup%LEVEL_1' archivelog all not backed up;
delete noprompt obsolete device type disk;
exit
EOF
I have tried this with cron (crontab) under both oracle and root env with $PATH containing the $ORACLE_HOME/bin as the first. The cron job under the crontab is as
44 17 * * * "/home/oracle/orabackup.sh >> /home/oracle/rmanbk.log 2>&1". And it kept returning with either "RMAN: command not found" or the "/bin/sh: line 1: /home/oracle/orabackup.sh >> /home/oracle/rmanbk.log 2>&1: No such file or directory". I had included su - oracle -c in the either script or cron job with or without quote, but result the same error. Does not matter the cron phrase was /home/oracle or without it. Some sites suggested to enter the #!/bin/sh as the first line of the script, tried that and failed too. So what exact I should phrase both the script and cron to let it run automatically. I could run the script manually under either oracle and root env.

I'll try to rephrase. There are (at least) three cases:
1. When you login with a terminal (e.g. with telnet, ssh) then the file ".bash_profile" is run automatically if your default shell is bash (check $SHELL to verify). In this case your personally-configured $PATH will be known with no effort on your side.
2. When a script is run by cron through crontab, then no login script is run automatically. In that case, you need to explicitly tell the script to run your login script, i.e. ".bash_profile". Otherwise, $PATH will not include $ORACLE_HOME/bin.
3. This case was not discussed before in this thread: When cron runs a job following "at" or "batch" commands, then the job will know all exported variables that were defined in the executing session. This shows that running a script with "at" is not a sufficient test before letting it run through crontab.
I may have not been perfectly correct here. It's best if you read the manuals for "bash", "at", and "cron" to know all about the subject.

How to run FSG with ADI..

Similar Messages

Maybe you are looking for