How to run more than one .xls file one by one in sequence order through inf

Hi All,
i have an requirement in informatica like, i need to call Sequence of Excel files ie(contact1.xls,contact2.xls ...etc ) through the infomratica mapping->workflow. this number of .xls files also not constant ie it might be 5 today , for the next run it might be 10..etc. its like For each loop kind of . once it loaded one by one .xls data into table the loaded file need to moved to Archive Folder .How can i achieve this with informatica mapping and informatica work flow?
thanks in advance

hello
try selecting the photos that you want however many- go, File then Export.
you can make all your file selections image size etc and then save them direct to your PS file.
hope this helps.
cjp

Similar Messages

How to run more than one vi simultaniously

hi
i need to run an error vi that waits for the confirmation from the user that he saw it (while it's front panel is open). in the mean time i want all the other parts of the program to go on and do it's work(loop 1).
i am using a queue to pass the errors that the first loop generates from time to time. but still the loop stops after one loop is ended and it waits for the error vi to close.
Attachments:
diagram.PNG ‏34 KB

You have wired a constant to the termination terminal of Loop 1 that tells it to stop after one iteration. The loop with the error vi in it will also stop after one iteration. However, if the case is such that you enter the error vi then the error vi must execute completely before the loop is ended. I would suggest that you put a stop button on the front panel and use this to terminate the conditional terminal, although it's not entirely clear to me what you're trying to do.
Also, on a side note, I noticed that you put code in the block diagram to increment a counter on each iteration. I assume that this was for troubleshooting since the data is not used anywhere in the code. This could have been accomplished by simply reading the iteration number from the
iteration terminal (the blue i in the lower left corner of the loop). In the event that you actually needed to create your own counter you would be better to use a shift register to pass data from one loop to another than to use the value property nodes.

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

How to transfer more than one files over internet at once?

hi, friends,
I just wonder how to transfer more than one files from one computer to another over internet at once. Not using ftp. pls any one give me the solution.

This isn't hard to do, but it depends on your exact need. I did something very similar to let me upload all my mp3 file from home to work using sockets (don't have the code anymore..).
What I did was implement a "pull" approach rather than a "push" approach. In other words, everytime my server got a request from a client, it served up the next file. It didn't know or care that the client was always the same.
If you can set up a server to serve one file when a client attaches, then basically just put that code in a loop.
If this doesn't meet you need, it might still be helpful as a starting point...

How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?

How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

IMac (2008) OS10.6.8 - Main menu freezes when running more than one application at a time. Apple and 3rd party applications - all freeze the main menu. Safe mode seems to work OK. Tried repairing permissions - didn't work.

For the past 60 days I've experienced Main Menu freeze when running more than one application at a time. iPhoto, Preview, Text Edit, Epson Scan, Firefox and Thunderbird are the apps I use almost daily. No matter what I do, when more than one is running they will freeze the Main Menu (top of the screen). I've tried booting is Safe Mode and I don't seem to have a problem. I've tried several suggestions from repairing permission (DiskUtility) to eliminating specifis login items. Nothing works. I've posted this issue on the Apple forum several times and no one else has experienced this problem. I hesitate to take my iMac to the Apple Store or a private Apple repair service until I've exhausted all of my options. Do I have any more options?

Question: Everytime an app crashes I have the option to report it to Apple - which I usually do. But I've NEVER reported a Main Menu freeze because it never asks me to
There's really no need to submit to Apple, it's just a round file cabinet on the other end, especially with 10.6 or earlier.
This sure sounds like a resource problem...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

How to start more than one program automatically? [RT]

Normally you can build an application and let it start automatically on the PXI system. You have to put the file into c:\ni-rt\startup\
But how to start more than one application in a pre-defined sequence? Depending on the situation there are several programs to be started that run simultaneously.
I searched for help in the Development Library and the Forums but I didn't find an answer.
Thank you very much for your helpin advance! Have a nice day!
Christoph

Hi Christoph,
You can use VI Server on the real-time target to launch other VIs dynamically. Your startup executable could be a simple application that uses VI Server to start other VIs that run in parallel in a pre-defined sequence.
Here's an example that does something similiar.
Note that when you build the VI into an application, you must include all the VIs that are called by VI Server as dynamic VIs in the application builder.
-Gerardo

How to display more than one documents on windows 8 desktop?

how to display more than one documents on windows 8 desktop?

Adobe Reader Touch doesn't show more than one file on screen and doesn't show them on the desktop. Apparently these are very old fashioned things that Microsoft doesn't think we'll want to do any more and calls them "legacy" to make them sound antiquated.
If you want to do these things use the legacy Adobe Reader, a much more powerful and flexible app (and not obsolete in the slightest). http://get.adobe.com/reader . There are no legacy apps in the Windows App Store.

How to share more than one Time Machine folder

Hi,
With Snow Leo Server I found how to find how to share more than one Time Machine Folder but I can't see how to do the same with Lion Server, could you help me with that ?
The goal of that is to offer one TM folder per user which is located on a dedicated partition in order to limit the size of TM backups per user (150Gig).
In Lion, in can only share one TM folder for everybody and I didn'tfind if I can set a limit size per user...
Thank you in advance,

I have figured out a way to enable multiple backup targets.
However, it's one of these things I wouldn't want to describe to anyone except true programmer types, because everyone else has a 90%+ chance of messing up their system if they do something wrong.
It involves turning off file sharing, and then editing the plist files in /private/var/db/dslocal/nodes/Default/sharepoints/
The gist of it is this:
a) first create all the share points you later want to use for TimeMachine, and set them up for afp-only file sharing, also create one TM target, which you can either use later, or have there so the system has one entry it knows how to handle. I just made a bogus one that I'm not actively using.
b) turn off file sharing in Server.app
c) turn off TimeMachine in Server.app
d) now you can edit the files, the easiest is with Xcode, so you may want to install that first
e) for each sharpoint you made in a) there will be a corresponding .plist file in the location indicated, these are the files that need to be edited.
f) for each of these files
     1) the item0 string property in the timeMachineBackup array must be switched from 0 to 1
     2) a new key of type array with the name timeMachineBackupUUID must be created
     3) in the newly created array an item of type string must be placed with the value of a UUID, which can be created with the shell command uuidgen
g) make sure all the edited plist files are saved
h) turn on TimeMachine in the Server.app again
If all went well, you now should be able to go to one of your networked client computers and see all the time machine share points just created as options for being a time machine target.
Anyway, if you go that route: be careful, don't blame me if you muck things up...

How to pass more than one value for one column in procedure

hi
select id, name from col_tab where dept_name in ('ECE','CIVIL');
when i was running this it is working well.
CREATE OR REPLACE PACKAGE pack_str
AS
TYPE type_refcur IS REF CURSOR;
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
IS
BEGIN
OPEN ans FOR
select id,name from col_tab where dept_name in char_in ;
END str;
END pack_str;
the package was created.
my doubt is
1.how to pass more than one value for char_in (e.g ('ECE','CIVIL'))
2. when i was storing the value in string like val = 'ECE,CIVIL' ,
how to get the id,name for ECE and CIVIL.
plz help me

Hi Rebekh ,
I am recreating your packages for the desired output.
CREATE OR REPLACE PACKAGE pack_str
AS
     TYPE type_refcur IS REF CURSOR;
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
     IS
          lv_t varchar2(200);
     BEGIN
          lv_t := REPLACE(char_in,',',''',''');
          lv_t := 'select id,name from col_tab where dept_name in (''' || lv_t || ''')' ;
          OPEN ans FOR lv_t;
     END str;
END pack_str;
Note:-
Input Parameter char_in is a comma seperated value for dept_name
-Debamalya

How to pass more than one parameter

Hello,
This is my code.
How to pass more than one parameter:
SELECT:responsibility_name responsibility_name,
LPAD(' ', 6*(LEVEL-1))
|| menu_entry.entry_sequence sequence ,
LPAD(' ', 6*(LEVEL-1))
|| menu.user_menu_name SubMenu_Description ,
LPAD(' ', 6*(LEVEL-1))
|| func.user_function_name Function_Description ,
LPAD(' ', 6*(LEVEL-1))
|| menu_entry.prompt prompt
,menu.menu_id ,
func.function_id
--menu_entry.grant_flag Grant_Flag ,
--DECODE( menu_entry.sub_menu_id , NULL, 'FUNCTION' , DECODE( menu_entry.function_id , NULL, 'SUBMENU' , 'BOTH') ) Type
FROM fnd_menu_entries_vl menu_entry ,
fnd_menus_tl menu ,
fnd_form_functions_tl func
WHERE menu_entry.sub_menu_id    = menu.menu_id(+)
AND menu_entry.function_id      = func.function_id(+)
AND MENU.LANGUAGE(+) = 'US'
AND FUNC.LANGUAGE(+) = 'US'
--AND func.user_function_name LIKE '%Primary Care Providers%'
AND grant_flag                  = 'Y'
START WITH menu_entry.menu_id =
(SELECT menu2.menu_id
FROM fnd_menus_tl menu2,apps.fnd_responsibility_vl resp
WHERE menu2.menu_id=resp.menu_id
and resp.responsibility_name= :responsibility_name
--and menu2.user_menu_name = ('ATCO HR INQ USER'
AND LANGUAGE = 'US'
CONNECT BY MENU_ENTRY.MENU_ID = PRIOR MENU_ENTRY.SUB_MENU_ID
   and menu_entry.function_id not in (select func.function_id
                                   from --fnd_form_functions_vl fnc,
                                   apps.fnd_resp_functions exc,
                                   apps.fnd_responsibility_vl res
                                  where func.function_id = exc.action_id
                                  and res.responsibility_name =:responsibility_name
                                  and res.responsibility_id=exc.responsibility_id)
and menu_entry.sub_menu_id not in (select menu.menu_id
                                   from --fnd_menus_vl imn,
                                   apps.fnd_resp_functions exc,
                                   apps.fnd_responsibility_vl res
                                   where menu.menu_id = exc.action_id
                                   and res.responsibility_name =:responsibility_name
                                  and res.responsibility_id=exc.responsibility_id)
ORDER SIBLINGS BY menu_entry.entry_sequence;
Thank you for your help
Shuishenming

Hi, Ming,
One way is to put the "parameters" in a table, and join to that table in your query. If you make it a Global Temporary Table, then multiple sessions can run the query at the same time, and each can be seeing different responsibilities.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data. Since this problem involves parameters, you should give a couple of different sets of parameters, and the results you want from the same sample data for each set.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

Using the the multiple profiles and running more than one instance of Fire fox at atim

I use F/F in a gaming situation I needed to be able to run more than one session at a time and read about a feature called multiple profiles. Then I read iin another forum that I could have multiple instances with the following bat file :
@echo off
set MOZ_NO_REMOTE=1
start "" "C:\Documents and Settings\Hilton Wiggins\My Documents\Fire Fox non Beta\firefox.exe" -p-no-remote
set MOZ_NO_REMOTE=0
I also have the Beta 4.06 on my machine and even though the batch file directs it to wither the Beat or the Non Beta they both seem to track the profiles and can be used in either version.
However It's not working as I described running two browsers with grease monkey it will start to mis handle data and they both lock up

There is no need to set MOZ_NO_REMOTE, remove that part of the bat file. Change the start line to:
start "" "C:\Documents and Settings\Hilton Wiggins\My Documents\Fire Fox non Beta\firefox.exe" -no-remote -p "profile name"

How to display more than one column with for each

Hi guys,
how to display more than one column with for each like below?
for each
Item1
Item2
Item3
Item4
Item5
Item6
Item7
Item8
Item9
Item10
End for each
for each
Item1     Item2     Item3
Item4     Item5     Item6
Item7     Item8     Item9
Item10
End for each

Take a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
Thanks,
Bipuser

How to show more than one record at a form-like style report?

Hi All,
I developed a form-like style report
I want it to show more than one record at once (At the same page)
I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
but when I close the property palete and open it agian the value is returned to 1 !!!
how to show more than one record at the same page?????
Thank u

Hi,
there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
Regards
Rainer

Cannot run more than one instance of a remote app in remote desktop services Server 2012

All,
I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done. We may have 12 or more students accessing and trying to run the Olyvia application
at any one time.
All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time. That is, when I start up "olyvia" on a Mac, it works great. If I leave it up and running, and then try
and start up "olyvia" on an iPad (using different accounts), I get the following error message:
"Cannot run more than one instance of this program simultaneously. Either the program is already running, or it has not been terminated completely."
I need to understand the root issue.
1. Is this a licensing issue? So, I need to add some CALs to the RDS server?
2. Is this a application issue with "olyvia"? So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
3. Did I not "publish" the application correctly?
4. Is this happening because I followed the "quick start" guide?
Appreciate any help I can get on this. We have no problem getting CALs, I just need some help with the root issue.
Thanks,
Geoff Weatherford
CVMBS, CSU

Hi Geoff,
Each application uses different techniques for determining if multiple instances are running. If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
In the best case you really should direct your question to the maker of Olyvia. The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why? Is it related to Licensing?
Compatibility? If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
-TP

How to run more than one .xls file one by one in sequence order through inf

Similar Messages

Maybe you are looking for