How to run Outlook Rule that fires a batch script that requires passing parameters.

How do I pass arguments/parameters to a batch script in an Outlook rule ?  The Parameters would be located in the body of the message.
Thanks.

Hi,
If the two arguments are always next to each other, then we can simply add that single phrase to the “specific words” list.
If the two arguments are not always next to each other, then there is no way in Outlook to do this with a single rule but we can achieve this by creating 2 rules. See:
http://www.msoutlook.info/question/220
Please Note: Since the web site is not hosted by
Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

  • How do i open sites that require adobe flash? I can't open my own website, not to mention tons of other sites.  It's ridiculous.

    How do i open sites that require adobe flash? I can't open my own website, not to mention tons of other sites.  It's ridiculous.

    Flash is not supported on the iPad and never has been supported on any iOS device - and as Adobe have never managed to make a version of their flash player that works on iOS devices, and they have recently announced that they are stopping development on all mobile versions of it, it probably never will be.
    Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store.

  • How do you watch videos that require flash on ipad2

    how do you watch videos that require flash on ipad2

    As flash isn't supported on the iPad (http://www.apple.com/hotnews/thoughts-on-flash/), you could try apps such as Skyfire which claim to support flash, though their review are mixed. A number of websites (especially news sites) have their own apps in the App Store, so you could check to see if your favourite site(s) have apps.

  • An Outlook rule that triggers a script gets deactivated every few weeks

    Hi all,
    I wrote a simple set of Outlook rules. One of them triggers a VB script that copies attachments of incoming mails (with a specific title and destination) to a share on a server. I added a certificate so that the user doesnt have to allow the script to run.
    Every few weeks, the rule stops being executed. When i check it, the rule is shown in red, and it's marked with the word "error".
    However, none of the parameters is shown in red.
    I had our IT dept. increase the mail server's storage limit to the max, but that didn't fix it.
    My current work-around:
    in the Rule Description, i click on the link that specifies which script has to be run if the rule's conditions are met. Next, i pick the same script, and all is fine again.
    Sadly, this is not acceptable to my co-workers, and i'm afraid i'll have to find another solution if i don't get this fixed soon-ish...
    Any help would be greatly appreciated.

    Hi,
    Press Win + R and type “outlook.exe /cleanrules” in the blank box, then press Enter.
    Opening Outlook with the /cleanrules switch will get rid of any corrupt rules, after this please recreate the rules and test the result.
    Note,you will lose current rules so it might be a good idea to export them first.
    (Import or export a set of rules:
    http://office.microsoft.com/en-in/outlook-help/import-or-export-a-set-of-rules-HP010355072.aspx)
    Let me know the result.
    Regards.
    Melon Chen
    TechNet Community Support
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to run the form that is only installed on a PC and not using a server?

    Hi
    I am new to Oracle and have taken the forms class. But I do not understand how to run the form from my PC using XP windows. (Do not have access to a server).
    I have started the OC4J, made sure the listener was started, compiled the form and then when I run it, it automatically goes to the HTTP:
    ERROR: res://ieframe.dll/acr_depnx_error.htm#,http://kevin:8889/forms/frmservle
    I connected to the database correctly. I can process a report and it does nor try to access the internet. My only issue is running the form. I verified it compiled.
    Sorry for a basic question. Could someone please help, I tried reviewing other questions, but not sure if they are connecting to a server or not.
    I see webutil but is it required if I don't have a server? Thank you in advance.

    Regardless of the version, it appears that you may not have configured the Builder. Do the following:
    1. Open the Builder
    2. From the menu, select Edit > Preferences > Runtime
    3. In the box labeled "Application Server URL:", enter a local URL needed to run a form OR click the button labeled "Reset to Default". If you decide to manually enter a value, it would looks something like this:
    http://localhost:8889/forms/frmservlet
    4. In the field labeled "Web Browser Location:", enter the path and executable to your preferred browser. So for example if IE is your browser of choice the entry would most likely look like this:
    C:\Program Files\Internet Explorer\IEXPLORE.EXE
    5. Click on OK and retest.
    By the way, you can manually enter a URL in the browser. Clicking the RunForm button from the Builder is strictly optional. To run the "test" form directly from the browser enter the following into the browser's address field:
    http://localhost:8889/forms/frmservlet?form=test
    More information about Forms can be found on OTN:
    http://www.oracle.com/technology/products/forms/index.html

  • HT1414 How do I get apps that require iOS 5 on my Iphone 4S with the latest version of 6.0.1 currently installed on it?  I cannot install many of the apps I want to use and am not sure what to do.  Thank you.

    I am not very good at navigating the Iphone so please be patient.  I have an Iphone 4S with the latest 6.0.1 and I would like to be able to download some of the apps that require iOS 5 on my iphone.  How do I do that.  When I look for the iOS 5 update it is no longer available.  I found that it is supposed to be available on Itunes.  I have not found it on Itunes.  All help is appreciated.  Thank you.

    Well, no. It's because that the iPod 4th Gen has iOS 6 and the apps need iOS 7. I suggest that you get the new iPod 5 because it has iOS 7. Also the iPod 4 does not have enough CPU or RAM. The new iPod 5 has enough CPU and RAM to store iOS 7 apps.
    Thanks!
    DeathBlaze65

  • How do I play programmes that require flash on my iPad?

    How do I play programmes on my iPad that require flash?

    You can also look at the box on the right>>>>> The "More Like This" box - and that will link you to countless discussions about this very same thing. Each time that you look at a response on this site - there is a More Like This box on the right. You can read those responses for days on end about this issue.

  • How do I watch something that requires adobe flash?

    I'm new to apple. I can't watch things that require Adobe Flash. Is there an app to download so t hat I can see these things?

    1st:  Check the App Store to see if there is an app for the service you are trying to watch the video from.
    2nd:  If no luck, you can purchase an App such as iSwifter, Photon or Puffin, which do offer more Flash viewing content success.  Buy the full paid version as the free lite versions don't offer much......

  • How to hide user id and password in batch scripts

    Hi,
    Can some one help me to hide the user id and password in batch scripts that used to automate Export and Action script execution process.
    Context : In my project client doesn't want display user id and password hence they are looking for secured way to hide them.
    Thanks for your answer in advance.
    Regards,
    Sainath.

    Sainath,
    Referring admin guide as mentioned by Craig is good option.
    Let me give you few steps that I did in one of my projects.
    Open command prompt and navigate to the path "C:\Oracle\Middleware\EPMSystem11R1\products\DataRelationshipManagement\client\batch-client".. here you can see many see other utilities as well.
    drm-batch-client-credentials.exe is the one used to encrypt the userid and password.
    open this in command prompt and then choose the application to which you want to encrypt the password.
    then remove userid and password from batch script then run it... it does what you want

  • How to run a app that only works in 10.4

    My version of Vectorworks only runs in 10.4
    I want to upgrade my Mac to 10.6
    I do not want to reboot into a 10.4 hard drive to just run Vectorworks.
    I want a solution that would run 10.4 simultaneously like Classic was when OSX first came out.
    Any ideas?

    Sorry, that is not possible.
    Allan

  • How to run a 10g report in quiet\batch mode

    Good Afternoon,
    Please advise if there is a way to run a 10g report from command line.
    We use 6i right now and our job scheduler runs reports using "D:\ORADEV6I\BIN\RWRUN60.EXE ..." executable in batch mode on a separate server. We plan to migrate to 10g Database, Forms, Reports. Is there a way to keep this functionality and create a "command" to request the report server to run a report?
    Thank you,
    Dmitri

    So the server (we will call it server1) you have "Redwood Cronacle 6.0.2" installed on has a C: drive and a D: drive. On the D: drive is installed Developer 6i (D:\ORADEV6I). You can install Developer Suite 10g also on the D: drive (D:\ORADEV10G for example). After that, setup Oracle iAS on server2. The good news is you have to change very little code. You can:
    Not use the iAS server at all and use the following command (similar to how you are doing it now) in Redwood:
    return 'D:\ORADEV10G\BIN\RWRUN.EXE'
    ||' userid=:USRPWD'
    ||' module='
    ||v_path||'\'||p_module
    ||' batch=yes paramform=no destype=file'
    ||' desformat=' || v_printer_driver
    ||' desname=:OUTFILE'
    ||' cmdfile=:CMDFILE errfile=:LOGFILE';If you want to use the iAS server, you have to consider where the report will physicall exist. You can have it exist on the reports server or you can have it brought back to the client. If you bring it back to the client you will lose the ability to run this asynchronously (or in batch mode). You will have to play with some of these parameters to get it to work perfectly, but this should be a good start. These are examples of have the report results saved locally on server1...not server2:
    1. Use rwclient to submit a report request
    return 'D:\ORADEV10G\BIN\RWCLIENT.EXE'
    ||' userid=:USRPWD'
    ||' module='
    ||v_path||'\'||p_module
    ||' paramform=no destype=localfile'
    ||' desformat=' || v_printer_driver
    ||' desname=:OUTFILE'
    ||' cmdfile=:CMDFILE errfile=:LOGFILE'
    ||' server=server2';2. Use rwservlet to submit a report request
    return 'D:\ORADEV10G\BIN\RWSERVLET.EXE'
    ||' userid=:USRPWD'
    ||' module='
    ||v_path||'\'||p_module
    ||' paramform=no destype=localfile'
    ||' desformat=' || v_printer_driver
    ||' desname=:OUTFILE'
    ||' cmdfile=:CMDFILE errfile=:LOGFILE'
    ||' server=server2';I would think that Cronacle 6.0.2 can submit a url as a job and wait for the results to be streamed back, so you could look into doing that also, in which case the url you would submit for the job would be something like:
    return 'http://server2:7777/reports/rwservlet?'
    ||' userid=:USRPWD'
    ||' module='
    ||v_path||'\'||p_module
    ||' paramform=no destype=cache'
    ||' desformat=' || v_printer_driver
    ||' desname=:OUTFILE'
    ||' cmdfile=:CMDFILE errfile=:LOGFILE'
    ||' server=server2';

  • How to run a java class from a shell script with passing arguments

    hi,
    I have a jar with all the required classes. I was using ant to run the classes i needed.
    But now i want to use a shell script to run the class, also the class accepts some arguments so when script is run it should accept arguments.
    So can any one tell me how to set class paths, jar location and call the required class from shell script or batch file with passing arguments to it.
    Thanks in advance.

    Let's say that the order of arguments is as below
    1. Jar file name
    2. Classpath
    Your shell script would look like this
    java -cp $CLASSPATH:$2 -jar $1 I am assuming that your jar file has the required main-class entry in its manifest. Note that $1...$9 represent the arguments to this shell script.
    The same goes for a batch file
    java -cp %CLASSPATH%;%2 -jar %1

  • How to run Excel 2011 from applescript for batch

    Every night at 2:00am, I want to convert an Excel spreadsheet to CSV.  I'm doing this on a Mac, with Excel 2011.  The following Applescript works sometimes:
    tell application "Microsoft Excel"
              open "/Users/siemsen/PetesLookup/BPO.inventory.current.xls"
              save active workbook in "BPO.inventory.current.csv" as CSV file format
      close workbook 1 saving no
      quit
    end tell
    With the above script saved in a file named convert.scpt, I can execute it from a bash script using the command "osascript convert.scpt".  The bash script runs in a launchd job at 2:00am every day.
    It works if Excel is already running on the Mac at the time the cron job runs.  If not, it starts Excel, which insists on displaynig a "Excel Workbook Gallery" dialog box.  No one is present on the Mac at the time, so no one clicks on the "Cancel" in the dialog box, so the Applescript times out and the cron job fails.
    How do I get around this?  Can I somehow start Excel without the **** "Excel Workbook Gallery" dialog?  Is there some other trick that will allow the job to run unattended?

    In Excel preferences (general tab) uncheck the checkbox that says "Open Project Gallery when application opens".  that should remove the startup dialog.

  • Need to run a program that requires windows... do not want to buy windows!

    We have been very happy Mac users for years now- recently I purchased some school software for my son (Switched on Schoolhouse) and it only runs in a Windows environment! I am so disappointed with this, but on further investigation saw that I could run windows ( I do NOT want to resort to this) just to run this ONE program!
    I saw somewhere that there are emulators out there that allow you to run this software on a mac without needing to install windows at all- they failed to mention which one they were using and I am very inexperienced about this and would love if somebody could point me in the right direction!

    Hi and welcome to Discussions,
    I concur with the recommendation of Crossover.
    A fairly new addition is Macindows http://www.pioneeringsoftware.co.uk/pages/products
    Since both offer time-limited trial versions, maybe try them for yourself to see which one better fits your needs.
    regards
    Stefan

  • How to create a form that requires thousands of checkboxes?

    Hello forum members,
    I have Adobe Acrobat 8 Professional.  I've been searching the internet/forums for the past few hours and I can't seem to find any information on how to create a form with many checkboxes.  I do not want to have to give individual names to thousands of checkboxes.  I'm hoping there's an easy solution to my problem.  Maybe I don't even need to use checkboxes.
    Here it is...
    I'm a DJ and wedding season is coming up.  For each wedding that I do, I usually give the bride and groom a list of my songs and they choose a bunch of songs that they'd like to have at their reception.  In the past, I've just been sending them a webpage word document with the songs and they'd send me their selections in a different document or directly in the reply email.  I'd like to make this process easy for them (and myself) by making a pdf document where they can simply place a checkmark beside the songs that they want and then send it back to me.  As a bonus (if it's possible) i'd like to be able to export the songs that they selected into a separate document so that I don't have to go through the entire pdf (with thousands and thousands of songs) when they send it back to me.
    I would be ever greatful if somebody help me or direct me to a link with some additional information.
    Thanks in advance,
    Mike

    George, thank you very much for your quick reply and good advice.
    Mike

Maybe you are looking for