How to run powerpc apps on mac 10.8

Hi i download and installed Rossta and it did not work but it did installed but how do i by pass the powerpc apps are no longer support of
i need to install this software
i can't upgrade the software or install osx in virtualbox itired that and it didn't work because it can't read the cd it needs the cd to ber in the drive when in use

detour12,
Did you understand the conclusion in this thread?
You use software called parallels which will allow you run two operating systems at once.
You install Snow Leopard as the second oparating system.
The reference on how to buy Snow Leopard was
http://forums.macrumors.com/showthread.php?t=1365439
To puchase Parallels see
http://www.parallels.com/landingpage/pd/upgrade/?utm_nooverride=1&gclid=CJWM2pTq -rkCFfBaMgodDWcA1A

Similar Messages

  • I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

    I recently upgraded to Mavericks from Snow Leopard. Does Snow Leopard still exist on my Mac? If so, is it possible to restart under Snow Leopard in order to run PowerPC apps? If not, is there an OS available in 64 bit that supports PowerPC apps? Mav ***.

    The only reason I upgraded to Mavericks was because my Snow Leopard OS was 32 bit, which I was told would support only 4GB of RAM.
    That wasn't quite right. You can put in as much RAM as your Mac's hardware supports. The division is in the apps themselves. A 32 bit app can't use more than 4 GB or RAM. A 64 bit app can use much more.
    For example, as a 32 bit only version, Photoshop CS3 can't use more 4GB of RAM, no matter how much you actually have installed. CS4 or later can use all the RAM you want to throw at it.

  • How to sys the apps between mac book running in mac ox lion and iphone 4s

    how to sys the apps between mac book running in mac ox lion and iphone 4s

    An app written for Lion can not work on iOS of iPhone.
    Allan

  • How to run ipad applications in mac

    how to run ipad applications in mac i ahve downloaded the application in macbook air . But i do not know how to run?

    It can't be done. iPads use iOS as the operating system. Macs use OS X as the operating system. iOS apps don't run on Macs and OS X apps don't run on iPads.
    That's why if there is an app that has been developed for both platforms, you have to buy them separately; iOS apps from the iTunes App Store and Mac apps from the Mac App Store.

  • How to run .exe files in mac pro?

    how to run .exe files in mac pro?
    i am looking for this to play games in my mac pro.
    if someone got a answer, just let me know
    cheers.

    mailking wrote:
    And I fail to see why you are attacking me...
    My comment is Valid...  " .exe files will not run natively on Mac OS X..."
    I am sorry. I had the false impression that it was commonly known that .exe files did not run on Mac OSX natively and failed to see any constructive critique you were bringing. Maybe I am wrong. Again deepest apologies.
    Unfortunately... these days... not every one is aware of this .exe  fact..
    Apology accepted.. and Thank You..

  • How to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store

    how to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store

    my problem solve by me
    first create apple id
    fill credit card details
    and complete your account creating  process.
    than go to app store or itune store
    login your acount
    click right side  - account button
    than again login for account setting
    next go to payment information and click edit button
    when u enter payment infomation
    click none button in payment method and click done button.
    than ur credit card has been removed.
    but rs. 60 will deducted in your account when u doing this process.

  • Install complete - how to run elements on my mac

    install complete - how to run elements on my mac?

    If Installation has been completed, then you can go to the Applications menu on your MAC and you find Photoshop elements listed out there.
    For understanding PSE, you can check this : http://helpx.adobe.com/photoshop-elements.html

  • How to move an apps from Mac to iPhone?

    How to move an apps from Mac to iPhone? My 4s after upgraded iOS 6 is can't connect to wifi and missing all contact number. Worst phone ever!!!

    Selected under the Apps tab for the iPhone sync preferences with iTunes followed by a sync.

  • How to run PowerPC software on new Macs

    Want to install and run an old Power PC sortware on a new Intel Mac.
    Upon installation, a pop up window on the new Mac says Power PC is no longer support.
    My friend had the same software running smoothly on a 2009 Macbook Pro. He installed the software long ago on his old Power PC mac and then through migration the software is now running on his Intel Mac.
    Did I miss anything during installation?
    Thanks
    NC

    MichelPM wrote:
    Can't believe Apple pulled OS X Snow Leopard Server from the store!!!!!
    Don't believe EVERYTHING you read on the Internet!
    "Apple is now selling Snow Leopard Server for $19.99 + sales tax & shipping costs at 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only - USA & Canada only)."
    It was never recently offered on the internet-based Apple Store; only telephone orders...
    I have already trans-shipped copies to Italy and the UK!
                                  [click on image to enlarge]

  • Is it possible to run PowerPC apps in Mavericks?

    I have an iMac that has been running OS X 10.6.8 for a while, but I just updated to Mavericks (10.9.2). I have the 10.6.2 install disc with rosetta and I have tried to reinstall rosetta a couple of times now, but I still can't open any PowerPC apps. I am wondering if there is any other way to use PPC apps in Mavericks.

    S\'Moore wrote:
    I don't know exactly what you mean by "partition", but if you let me know how to do that, it sounds like it would work best. I also tried VirtualBox, but I couldn't get it to work correctly.
    Use Disk Utility in the Utilities folder in the Applications folder to create a 2nd partition on your internal hard drive.  It makes the Mac think that two separate hard drives are connected to it.
    Then install Snow Leopard (with the optional Rosetta and IMHO QuickTime 7) into the 2nd partition.
    Then using Startup Disk in System Preferences, you can decide which flavor of OS X will be active when you restart your Mac: Mavericks or Snow Leopard.
    Using the other option that Kurt suggests, with VirtualBox, should work, but you are best off to purchase Snow Leopard Server for $20 from Apple for ease of installation into VirtualBox and continued use and maintenance:
    1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
    Snow Leopard client can be installed into Parallels with some difficulty, but the cost of Parallels would exceed your cost to just purchase Snow Leopard Server, which should easily install into VirtualBox (although I personally have no experience with VirtualBox).

  • Can't run PowerPC apps under Snow Leopard. Why?

    I just upgraded to Mountain Lion on my main hard drive. I also installed Snow Leopard on an external drive to run some older PowerPC apps I have that Lion and Mountain Lion don't support. Snow Leopard is supposed to run PowerPC applications just fine. So I installed those apps on the same drive as SL, but when I start up from that drive, the apps won't open? The system starts up just fine from the external drive, but when I try to open the apps, they just bounce in the dock at the bottom of the screen for a few seconds (like they're starting up). Then they go away and don't start up. No error warnings, no crashes. Nothing. I've restarted after the installs, checked to make sure folders weren't locked, etc. I can think of no reason why the apps won't run under SL on an external drive. Anyone have a guess?

    Obviously you are unaware of the advice I give on this forum: You're preaching to the choir!
    Try this patch for Freehand MX use in Snow Leopard:
    http://helpx.adobe.com/freehand/kb/cant-launch-freehand-mx-mac.html
    Let me know how this works out for you.
    Here is how I run Freehand MX on my Lion Macs:
                                  [click on image to enlarge]

  • How to update PowerPC apps after installing Lion OS X?

    I need to update my PowerPC apps after installing Lion OS X, and if not find a way to run them on Lion using a patch, emulator, converter or otherwise? All help appreciated, thanks for reading. Please note, I do not curretny have a hard-copy of Lion or Snow Leopard.
    I feel Apple has really let its users down by creating all these compatiblity problems. Myself along ith many other Mac users have to spend valuable time and money, which we won't get back just trying tto find solutions to these problems. It really does lower my opinion of Apple.

    darkhorse85 wrote:
    I need to update my PowerPC apps after installing Lion OS X, and if not find a way to run them on Lion using a patch, emulator, converter or otherwise? All help appreciated, thanks for reading. Please note, I do not curretny have a hard-copy of Lion or Snow Leopard.
    I feel Apple has really let its users down by creating all these compatiblity problems. Myself along ith many other Mac users have to spend valuable time and money, which we won't get back just trying tto find solutions to these problems. It really does lower my opinion of Apple.
    Use your System Discs you got with your computer and return your system to it's previous state with your last Time Machine Backup. If you were on Snow Leopard and have lost your discs then ring Apple and you can probably get a replacement set for a nominal fee.
    Good Luck
    Pete

  • How to run classic apps on a Macbook

    I do not know where to post this, so excuse me if this is OT. But I ran into this page
    http://www.applelinks.com/index.php/more/sheepshaver23_enables_you_to_run_classic_macos_programs_onmacintels/
    I suppose this is a shareware app (not a commercial app) that allows one to run PPC apps and 68K apps on a Intel Mac. Is this correct? If it is, does one need a ROM image? If so I am out of luck as all my PPC native Macs
    (well with the exception to my ibook G4) have been given away (could not get a penny out of the Performa's).
    Also can I run this app on my ibook? I have a old game created in 1989 that for whatever reason cannot run in classic mode (the game ran fine in my Performa 6360 under 9.1). I have tried to get the developer to create an upgrade, but he refuses, and the company that owns the copyright to the game is out of the Mac business, and besides they would not be too happy about him updating the game to run under OSX. So it looks like since I lack a native OS 9 Mac, I am out of luck.
    John

    This is an open-source project. You can get more information here:
    http://www.gibix.net/dokuwiki/en:projects:sheepshaver
    You do need a ROM image to make this work.

  • How to transfer purchased apps from Mac to iPhone

    Hello,
    I purchased some college apps on my mac book and I need to this programs on my iPhone too.I read all discussions about that and did everything but not success about that.My iTunes doesnt see the purchase programs on my computer.
    Thank You,
    Furkan

    You have to log into iPhone App Store and purchase the iPhone version of the apps. Mac apps only run on Macs, iOS apps only run on iPhone/iPads/iPods.

  • How to run Labview apps in tablet with android os

    How to run Labview application in tablet with android operating system?
    Can we use Labview mobile module or we must use google play data dashboard for labVIEW? how to install it in PC?
    Solved!
    Go to Solution.

    If you had looked at data dashboard and some of the other links on Android, you would see that you cannot run a LabVIEW app on Android. Nor can you use a serial port. With Data Dashboard, you have a pc running LabVIEW and it publishes to network shared variables. Data Dashboard on the Android allows you to view those variables.

Maybe you are looking for